linux-sg2042/arch/unicore32/mm/proc-ucv2.S

135 lines
2.7 KiB
ArmAsm

/*
* linux/arch/unicore32/mm/proc-ucv2.S
*
* Code specific to PKUnity SoC and UniCore ISA
*
* Copyright (C) 2001-2010 GUAN Xue-tao
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include "proc-macros.S"
ENTRY(cpu_proc_fin)
stm.w (lr), [sp-]
mov ip, #PSR_R_BIT | PSR_I_BIT | PRIV_MODE
mov.a asr, ip
b.l __cpuc_flush_kern_all
ldm.w (pc), [sp]+
/*
* cpu_reset(loc)
*
* Perform a soft reset of the system. Put the CPU into the
* same state as it would be if it had been reset, and branch
* to what would be the reset vector.
*
* - loc - location to jump to for soft reset
*/
.align 5
ENTRY(cpu_reset)
mov ip, #0
movc p0.c5, ip, #28 @ Cache invalidate all
nop8
movc p0.c6, ip, #6 @ TLB invalidate all
nop8
movc ip, p0.c1, #0 @ ctrl register
or ip, ip, #0x2000 @ vector base address
andn ip, ip, #0x000f @ ............idam
movc p0.c1, ip, #0 @ disable caches and mmu
nop
mov pc, r0 @ jump to loc
nop8
/*
* cpu_do_idle()
*
* Idle the processor (eg, wait for interrupt).
*
* IRQs are already disabled.
*/
ENTRY(cpu_do_idle)
mov r0, #0 @ PCI address
.rept 8
ldw r1, [r0]
.endr
mov pc, lr
ENTRY(cpu_dcache_clean_area)
#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
csub.a r1, #MAX_AREA_SIZE
bsg 101f
mov r9, #PAGE_SZ
sub r9, r9, #1 @ PAGE_MASK
1: va2pa r0, r10, r11, r12, r13 @ r10 is PA
b 3f
2: cand.a r0, r9
beq 1b
3: movc p0.c5, r10, #11 @ clean D entry
nop8
add r0, r0, #CACHE_LINESIZE
add r10, r10, #CACHE_LINESIZE
sub.a r1, r1, #CACHE_LINESIZE
bua 2b
mov pc, lr
#endif
101: mov ip, #0
movc p0.c5, ip, #10 @ Dcache clean all
nop8
mov pc, lr
/*
* cpu_do_switch_mm(pgd_phys)
*
* Set the translation table base pointer to be pgd_phys
*
* - pgd_phys - physical address of new pgd
*
* It is assumed that:
* - we are not using split page tables
*/
.align 5
ENTRY(cpu_do_switch_mm)
movc p0.c2, r0, #0 @ update page table ptr
nop8
movc p0.c6, ip, #6 @ TLB invalidate all
nop8
mov pc, lr
/*
* cpu_set_pte(ptep, pte)
*
* Set a level 2 translation table entry.
*
* - ptep - pointer to level 2 translation table entry
* - pte - PTE value to store
*/
.align 5
ENTRY(cpu_set_pte)
stw r1, [r0]
#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
sub r2, r0, #PAGE_OFFSET
movc p0.c5, r2, #11 @ Dcache clean line
nop8
#else
mov ip, #0
movc p0.c5, ip, #10 @ Dcache clean all
nop8
@dcacheline_flush r0, r2, ip
#endif
mov pc, lr