876 lines
21 KiB
C
876 lines
21 KiB
C
/* CoreChip-sz SR9800 one chip USB 2.0 Ethernet Devices
|
|
*
|
|
* Author : Liu Junliang <liujunliang_ljl@163.com>
|
|
*
|
|
* Based on asix_common.c, asix_devices.c
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public License
|
|
* version 2. This program is licensed "as is" without any warranty of any
|
|
* kind, whether express or implied.*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kmod.h>
|
|
#include <linux/init.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/usb/usbnet.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/if_vlan.h>
|
|
|
|
#include "sr9800.h"
|
|
|
|
static int sr_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
|
|
u16 size, void *data)
|
|
{
|
|
int err;
|
|
|
|
err = usbnet_read_cmd(dev, cmd, SR_REQ_RD_REG, value, index,
|
|
data, size);
|
|
if ((err != size) && (err >= 0))
|
|
err = -EINVAL;
|
|
|
|
return err;
|
|
}
|
|
|
|
static int sr_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
|
|
u16 size, void *data)
|
|
{
|
|
int err;
|
|
|
|
err = usbnet_write_cmd(dev, cmd, SR_REQ_WR_REG, value, index,
|
|
data, size);
|
|
if ((err != size) && (err >= 0))
|
|
err = -EINVAL;
|
|
|
|
return err;
|
|
}
|
|
|
|
static void
|
|
sr_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
|
|
u16 size, void *data)
|
|
{
|
|
usbnet_write_cmd_async(dev, cmd, SR_REQ_WR_REG, value, index, data,
|
|
size);
|
|
}
|
|
|
|
static int sr_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
|
|
{
|
|
int offset = 0;
|
|
|
|
/* This check is no longer done by usbnet */
|
|
if (skb->len < dev->net->hard_header_len)
|
|
return 0;
|
|
|
|
while (offset + sizeof(u32) < skb->len) {
|
|
struct sk_buff *sr_skb;
|
|
u16 size;
|
|
u32 header = get_unaligned_le32(skb->data + offset);
|
|
|
|
offset += sizeof(u32);
|
|
/* get the packet length */
|
|
size = (u16) (header & 0x7ff);
|
|
if (size != ((~header >> 16) & 0x07ff)) {
|
|
netdev_err(dev->net, "%s : Bad Header Length\n",
|
|
__func__);
|
|
return 0;
|
|
}
|
|
|
|
if ((size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) ||
|
|
(size + offset > skb->len)) {
|
|
netdev_err(dev->net, "%s : Bad RX Length %d\n",
|
|
__func__, size);
|
|
return 0;
|
|
}
|
|
sr_skb = netdev_alloc_skb_ip_align(dev->net, size);
|
|
if (!sr_skb)
|
|
return 0;
|
|
|
|
skb_put(sr_skb, size);
|
|
memcpy(sr_skb->data, skb->data + offset, size);
|
|
usbnet_skb_return(dev, sr_skb);
|
|
|
|
offset += (size + 1) & 0xfffe;
|
|
}
|
|
|
|
if (skb->len != offset) {
|
|
netdev_err(dev->net, "%s : Bad SKB Length %d\n", __func__,
|
|
skb->len);
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static struct sk_buff *sr_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
|
|
gfp_t flags)
|
|
{
|
|
int headroom = skb_headroom(skb);
|
|
int tailroom = skb_tailroom(skb);
|
|
u32 padbytes = 0xffff0000;
|
|
u32 packet_len;
|
|
int padlen;
|
|
|
|
padlen = ((skb->len + 4) % (dev->maxpacket - 1)) ? 0 : 4;
|
|
|
|
if ((!skb_cloned(skb)) && ((headroom + tailroom) >= (4 + padlen))) {
|
|
if ((headroom < 4) || (tailroom < padlen)) {
|
|
skb->data = memmove(skb->head + 4, skb->data,
|
|
skb->len);
|
|
skb_set_tail_pointer(skb, skb->len);
|
|
}
|
|
} else {
|
|
struct sk_buff *skb2;
|
|
skb2 = skb_copy_expand(skb, 4, padlen, flags);
|
|
dev_kfree_skb_any(skb);
|
|
skb = skb2;
|
|
if (!skb)
|
|
return NULL;
|
|
}
|
|
|
|
skb_push(skb, 4);
|
|
packet_len = (((skb->len - 4) ^ 0x0000ffff) << 16) + (skb->len - 4);
|
|
cpu_to_le32s(&packet_len);
|
|
skb_copy_to_linear_data(skb, &packet_len, sizeof(packet_len));
|
|
|
|
if (padlen) {
|
|
cpu_to_le32s(&padbytes);
|
|
memcpy(skb_tail_pointer(skb), &padbytes, sizeof(padbytes));
|
|
skb_put(skb, sizeof(padbytes));
|
|
}
|
|
|
|
usbnet_set_skb_tx_stats(skb, 1, 0);
|
|
return skb;
|
|
}
|
|
|
|
static void sr_status(struct usbnet *dev, struct urb *urb)
|
|
{
|
|
struct sr9800_int_data *event;
|
|
int link;
|
|
|
|
if (urb->actual_length < 8)
|
|
return;
|
|
|
|
event = urb->transfer_buffer;
|
|
link = event->link & 0x01;
|
|
if (netif_carrier_ok(dev->net) != link) {
|
|
usbnet_link_change(dev, link, 1);
|
|
netdev_dbg(dev->net, "Link Status is: %d\n", link);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static inline int sr_set_sw_mii(struct usbnet *dev)
|
|
{
|
|
int ret;
|
|
|
|
ret = sr_write_cmd(dev, SR_CMD_SET_SW_MII, 0x0000, 0, 0, NULL);
|
|
if (ret < 0)
|
|
netdev_err(dev->net, "Failed to enable software MII access\n");
|
|
return ret;
|
|
}
|
|
|
|
static inline int sr_set_hw_mii(struct usbnet *dev)
|
|
{
|
|
int ret;
|
|
|
|
ret = sr_write_cmd(dev, SR_CMD_SET_HW_MII, 0x0000, 0, 0, NULL);
|
|
if (ret < 0)
|
|
netdev_err(dev->net, "Failed to enable hardware MII access\n");
|
|
return ret;
|
|
}
|
|
|
|
static inline int sr_get_phy_addr(struct usbnet *dev)
|
|
{
|
|
u8 buf[2];
|
|
int ret;
|
|
|
|
ret = sr_read_cmd(dev, SR_CMD_READ_PHY_ID, 0, 0, 2, buf);
|
|
if (ret < 0) {
|
|
netdev_err(dev->net, "%s : Error reading PHYID register:%02x\n",
|
|
__func__, ret);
|
|
goto out;
|
|
}
|
|
netdev_dbg(dev->net, "%s : returning 0x%04x\n", __func__,
|
|
*((__le16 *)buf));
|
|
|
|
ret = buf[1];
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int sr_sw_reset(struct usbnet *dev, u8 flags)
|
|
{
|
|
int ret;
|
|
|
|
ret = sr_write_cmd(dev, SR_CMD_SW_RESET, flags, 0, 0, NULL);
|
|
if (ret < 0)
|
|
netdev_err(dev->net, "Failed to send software reset:%02x\n",
|
|
ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static u16 sr_read_rx_ctl(struct usbnet *dev)
|
|
{
|
|
__le16 v;
|
|
int ret;
|
|
|
|
ret = sr_read_cmd(dev, SR_CMD_READ_RX_CTL, 0, 0, 2, &v);
|
|
if (ret < 0) {
|
|
netdev_err(dev->net, "Error reading RX_CTL register:%02x\n",
|
|
ret);
|
|
goto out;
|
|
}
|
|
|
|
ret = le16_to_cpu(v);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int sr_write_rx_ctl(struct usbnet *dev, u16 mode)
|
|
{
|
|
int ret;
|
|
|
|
netdev_dbg(dev->net, "%s : mode = 0x%04x\n", __func__, mode);
|
|
ret = sr_write_cmd(dev, SR_CMD_WRITE_RX_CTL, mode, 0, 0, NULL);
|
|
if (ret < 0)
|
|
netdev_err(dev->net,
|
|
"Failed to write RX_CTL mode to 0x%04x:%02x\n",
|
|
mode, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static u16 sr_read_medium_status(struct usbnet *dev)
|
|
{
|
|
__le16 v;
|
|
int ret;
|
|
|
|
ret = sr_read_cmd(dev, SR_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v);
|
|
if (ret < 0) {
|
|
netdev_err(dev->net,
|
|
"Error reading Medium Status register:%02x\n", ret);
|
|
return ret; /* TODO: callers not checking for error ret */
|
|
}
|
|
|
|
return le16_to_cpu(v);
|
|
}
|
|
|
|
static int sr_write_medium_mode(struct usbnet *dev, u16 mode)
|
|
{
|
|
int ret;
|
|
|
|
netdev_dbg(dev->net, "%s : mode = 0x%04x\n", __func__, mode);
|
|
ret = sr_write_cmd(dev, SR_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
|
|
if (ret < 0)
|
|
netdev_err(dev->net,
|
|
"Failed to write Medium Mode mode to 0x%04x:%02x\n",
|
|
mode, ret);
|
|
return ret;
|
|
}
|
|
|
|
static int sr_write_gpio(struct usbnet *dev, u16 value, int sleep)
|
|
{
|
|
int ret;
|
|
|
|
netdev_dbg(dev->net, "%s : value = 0x%04x\n", __func__, value);
|
|
ret = sr_write_cmd(dev, SR_CMD_WRITE_GPIOS, value, 0, 0, NULL);
|
|
if (ret < 0)
|
|
netdev_err(dev->net, "Failed to write GPIO value 0x%04x:%02x\n",
|
|
value, ret);
|
|
if (sleep)
|
|
msleep(sleep);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* SR9800 have a 16-bit RX_CTL value */
|
|
static void sr_set_multicast(struct net_device *net)
|
|
{
|
|
struct usbnet *dev = netdev_priv(net);
|
|
struct sr_data *data = (struct sr_data *)&dev->data;
|
|
u16 rx_ctl = SR_DEFAULT_RX_CTL;
|
|
|
|
if (net->flags & IFF_PROMISC) {
|
|
rx_ctl |= SR_RX_CTL_PRO;
|
|
} else if (net->flags & IFF_ALLMULTI ||
|
|
netdev_mc_count(net) > SR_MAX_MCAST) {
|
|
rx_ctl |= SR_RX_CTL_AMALL;
|
|
} else if (netdev_mc_empty(net)) {
|
|
/* just broadcast and directed */
|
|
} else {
|
|
/* We use the 20 byte dev->data
|
|
* for our 8 byte filter buffer
|
|
* to avoid allocating memory that
|
|
* is tricky to free later
|
|
*/
|
|
struct netdev_hw_addr *ha;
|
|
u32 crc_bits;
|
|
|
|
memset(data->multi_filter, 0, SR_MCAST_FILTER_SIZE);
|
|
|
|
/* Build the multicast hash filter. */
|
|
netdev_for_each_mc_addr(ha, net) {
|
|
crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
|
|
data->multi_filter[crc_bits >> 3] |=
|
|
1 << (crc_bits & 7);
|
|
}
|
|
|
|
sr_write_cmd_async(dev, SR_CMD_WRITE_MULTI_FILTER, 0, 0,
|
|
SR_MCAST_FILTER_SIZE, data->multi_filter);
|
|
|
|
rx_ctl |= SR_RX_CTL_AM;
|
|
}
|
|
|
|
sr_write_cmd_async(dev, SR_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
|
|
}
|
|
|
|
static int sr_mdio_read(struct net_device *net, int phy_id, int loc)
|
|
{
|
|
struct usbnet *dev = netdev_priv(net);
|
|
__le16 res;
|
|
|
|
mutex_lock(&dev->phy_mutex);
|
|
sr_set_sw_mii(dev);
|
|
sr_read_cmd(dev, SR_CMD_READ_MII_REG, phy_id, (__u16)loc, 2, &res);
|
|
sr_set_hw_mii(dev);
|
|
mutex_unlock(&dev->phy_mutex);
|
|
|
|
netdev_dbg(dev->net,
|
|
"%s : phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n", __func__,
|
|
phy_id, loc, le16_to_cpu(res));
|
|
|
|
return le16_to_cpu(res);
|
|
}
|
|
|
|
static void
|
|
sr_mdio_write(struct net_device *net, int phy_id, int loc, int val)
|
|
{
|
|
struct usbnet *dev = netdev_priv(net);
|
|
__le16 res = cpu_to_le16(val);
|
|
|
|
netdev_dbg(dev->net,
|
|
"%s : phy_id=0x%02x, loc=0x%02x, val=0x%04x\n", __func__,
|
|
phy_id, loc, val);
|
|
mutex_lock(&dev->phy_mutex);
|
|
sr_set_sw_mii(dev);
|
|
sr_write_cmd(dev, SR_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, &res);
|
|
sr_set_hw_mii(dev);
|
|
mutex_unlock(&dev->phy_mutex);
|
|
}
|
|
|
|
/* Get the PHY Identifier from the PHYSID1 & PHYSID2 MII registers */
|
|
static u32 sr_get_phyid(struct usbnet *dev)
|
|
{
|
|
int phy_reg;
|
|
u32 phy_id;
|
|
int i;
|
|
|
|
/* Poll for the rare case the FW or phy isn't ready yet. */
|
|
for (i = 0; i < 100; i++) {
|
|
phy_reg = sr_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
|
|
if (phy_reg != 0 && phy_reg != 0xFFFF)
|
|
break;
|
|
mdelay(1);
|
|
}
|
|
|
|
if (phy_reg <= 0 || phy_reg == 0xFFFF)
|
|
return 0;
|
|
|
|
phy_id = (phy_reg & 0xffff) << 16;
|
|
|
|
phy_reg = sr_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID2);
|
|
if (phy_reg < 0)
|
|
return 0;
|
|
|
|
phy_id |= (phy_reg & 0xffff);
|
|
|
|
return phy_id;
|
|
}
|
|
|
|
static void
|
|
sr_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
|
|
{
|
|
struct usbnet *dev = netdev_priv(net);
|
|
u8 opt;
|
|
|
|
if (sr_read_cmd(dev, SR_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
|
|
wolinfo->supported = 0;
|
|
wolinfo->wolopts = 0;
|
|
return;
|
|
}
|
|
wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
|
|
wolinfo->wolopts = 0;
|
|
if (opt & SR_MONITOR_LINK)
|
|
wolinfo->wolopts |= WAKE_PHY;
|
|
if (opt & SR_MONITOR_MAGIC)
|
|
wolinfo->wolopts |= WAKE_MAGIC;
|
|
}
|
|
|
|
static int
|
|
sr_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
|
|
{
|
|
struct usbnet *dev = netdev_priv(net);
|
|
u8 opt = 0;
|
|
|
|
if (wolinfo->wolopts & WAKE_PHY)
|
|
opt |= SR_MONITOR_LINK;
|
|
if (wolinfo->wolopts & WAKE_MAGIC)
|
|
opt |= SR_MONITOR_MAGIC;
|
|
|
|
if (sr_write_cmd(dev, SR_CMD_WRITE_MONITOR_MODE,
|
|
opt, 0, 0, NULL) < 0)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sr_get_eeprom_len(struct net_device *net)
|
|
{
|
|
struct usbnet *dev = netdev_priv(net);
|
|
struct sr_data *data = (struct sr_data *)&dev->data;
|
|
|
|
return data->eeprom_len;
|
|
}
|
|
|
|
static int sr_get_eeprom(struct net_device *net,
|
|
struct ethtool_eeprom *eeprom, u8 *data)
|
|
{
|
|
struct usbnet *dev = netdev_priv(net);
|
|
__le16 *ebuf = (__le16 *)data;
|
|
int ret;
|
|
int i;
|
|
|
|
/* Crude hack to ensure that we don't overwrite memory
|
|
* if an odd length is supplied
|
|
*/
|
|
if (eeprom->len % 2)
|
|
return -EINVAL;
|
|
|
|
eeprom->magic = SR_EEPROM_MAGIC;
|
|
|
|
/* sr9800 returns 2 bytes from eeprom on read */
|
|
for (i = 0; i < eeprom->len / 2; i++) {
|
|
ret = sr_read_cmd(dev, SR_CMD_READ_EEPROM, eeprom->offset + i,
|
|
0, 2, &ebuf[i]);
|
|
if (ret < 0)
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void sr_get_drvinfo(struct net_device *net,
|
|
struct ethtool_drvinfo *info)
|
|
{
|
|
struct usbnet *dev = netdev_priv(net);
|
|
struct sr_data *data = (struct sr_data *)&dev->data;
|
|
|
|
/* Inherit standard device info */
|
|
usbnet_get_drvinfo(net, info);
|
|
strncpy(info->driver, DRIVER_NAME, sizeof(info->driver));
|
|
strncpy(info->version, DRIVER_VERSION, sizeof(info->version));
|
|
info->eedump_len = data->eeprom_len;
|
|
}
|
|
|
|
static u32 sr_get_link(struct net_device *net)
|
|
{
|
|
struct usbnet *dev = netdev_priv(net);
|
|
|
|
return mii_link_ok(&dev->mii);
|
|
}
|
|
|
|
static int sr_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
|
|
{
|
|
struct usbnet *dev = netdev_priv(net);
|
|
|
|
return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
|
|
}
|
|
|
|
static int sr_set_mac_address(struct net_device *net, void *p)
|
|
{
|
|
struct usbnet *dev = netdev_priv(net);
|
|
struct sr_data *data = (struct sr_data *)&dev->data;
|
|
struct sockaddr *addr = p;
|
|
|
|
if (netif_running(net))
|
|
return -EBUSY;
|
|
if (!is_valid_ether_addr(addr->sa_data))
|
|
return -EADDRNOTAVAIL;
|
|
|
|
memcpy(net->dev_addr, addr->sa_data, ETH_ALEN);
|
|
|
|
/* We use the 20 byte dev->data
|
|
* for our 6 byte mac buffer
|
|
* to avoid allocating memory that
|
|
* is tricky to free later
|
|
*/
|
|
memcpy(data->mac_addr, addr->sa_data, ETH_ALEN);
|
|
sr_write_cmd_async(dev, SR_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
|
|
data->mac_addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct ethtool_ops sr9800_ethtool_ops = {
|
|
.get_drvinfo = sr_get_drvinfo,
|
|
.get_link = sr_get_link,
|
|
.get_msglevel = usbnet_get_msglevel,
|
|
.set_msglevel = usbnet_set_msglevel,
|
|
.get_wol = sr_get_wol,
|
|
.set_wol = sr_set_wol,
|
|
.get_eeprom_len = sr_get_eeprom_len,
|
|
.get_eeprom = sr_get_eeprom,
|
|
.get_settings = usbnet_get_settings,
|
|
.set_settings = usbnet_set_settings,
|
|
.nway_reset = usbnet_nway_reset,
|
|
};
|
|
|
|
static int sr9800_link_reset(struct usbnet *dev)
|
|
{
|
|
struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
|
|
u16 mode;
|
|
|
|
mii_check_media(&dev->mii, 1, 1);
|
|
mii_ethtool_gset(&dev->mii, &ecmd);
|
|
mode = SR9800_MEDIUM_DEFAULT;
|
|
|
|
if (ethtool_cmd_speed(&ecmd) != SPEED_100)
|
|
mode &= ~SR_MEDIUM_PS;
|
|
|
|
if (ecmd.duplex != DUPLEX_FULL)
|
|
mode &= ~SR_MEDIUM_FD;
|
|
|
|
netdev_dbg(dev->net, "%s : speed: %u duplex: %d mode: 0x%04x\n",
|
|
__func__, ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
|
|
|
|
sr_write_medium_mode(dev, mode);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int sr9800_set_default_mode(struct usbnet *dev)
|
|
{
|
|
u16 rx_ctl;
|
|
int ret;
|
|
|
|
sr_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
|
|
sr_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
|
|
ADVERTISE_ALL | ADVERTISE_CSMA);
|
|
mii_nway_restart(&dev->mii);
|
|
|
|
ret = sr_write_medium_mode(dev, SR9800_MEDIUM_DEFAULT);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
ret = sr_write_cmd(dev, SR_CMD_WRITE_IPG012,
|
|
SR9800_IPG0_DEFAULT | SR9800_IPG1_DEFAULT,
|
|
SR9800_IPG2_DEFAULT, 0, NULL);
|
|
if (ret < 0) {
|
|
netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
|
|
goto out;
|
|
}
|
|
|
|
/* Set RX_CTL to default values with 2k buffer, and enable cactus */
|
|
ret = sr_write_rx_ctl(dev, SR_DEFAULT_RX_CTL);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
rx_ctl = sr_read_rx_ctl(dev);
|
|
netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
|
|
rx_ctl);
|
|
|
|
rx_ctl = sr_read_medium_status(dev);
|
|
netdev_dbg(dev->net, "Medium Status:0x%04x after all initializations\n",
|
|
rx_ctl);
|
|
|
|
return 0;
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int sr9800_reset(struct usbnet *dev)
|
|
{
|
|
struct sr_data *data = (struct sr_data *)&dev->data;
|
|
int ret, embd_phy;
|
|
u16 rx_ctl;
|
|
|
|
ret = sr_write_gpio(dev,
|
|
SR_GPIO_RSE | SR_GPIO_GPO_2 | SR_GPIO_GPO2EN, 5);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
embd_phy = ((sr_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0);
|
|
|
|
ret = sr_write_cmd(dev, SR_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
|
|
if (ret < 0) {
|
|
netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
|
|
goto out;
|
|
}
|
|
|
|
ret = sr_sw_reset(dev, SR_SWRESET_IPPD | SR_SWRESET_PRL);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
msleep(150);
|
|
|
|
ret = sr_sw_reset(dev, SR_SWRESET_CLEAR);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
msleep(150);
|
|
|
|
if (embd_phy) {
|
|
ret = sr_sw_reset(dev, SR_SWRESET_IPRL);
|
|
if (ret < 0)
|
|
goto out;
|
|
} else {
|
|
ret = sr_sw_reset(dev, SR_SWRESET_PRTE);
|
|
if (ret < 0)
|
|
goto out;
|
|
}
|
|
|
|
msleep(150);
|
|
rx_ctl = sr_read_rx_ctl(dev);
|
|
netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
|
|
ret = sr_write_rx_ctl(dev, 0x0000);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
rx_ctl = sr_read_rx_ctl(dev);
|
|
netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
|
|
|
|
ret = sr_sw_reset(dev, SR_SWRESET_PRL);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
msleep(150);
|
|
|
|
ret = sr_sw_reset(dev, SR_SWRESET_IPRL | SR_SWRESET_PRL);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
msleep(150);
|
|
|
|
ret = sr9800_set_default_mode(dev);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
/* Rewrite MAC address */
|
|
memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
|
|
ret = sr_write_cmd(dev, SR_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
|
|
data->mac_addr);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
return 0;
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static const struct net_device_ops sr9800_netdev_ops = {
|
|
.ndo_open = usbnet_open,
|
|
.ndo_stop = usbnet_stop,
|
|
.ndo_start_xmit = usbnet_start_xmit,
|
|
.ndo_tx_timeout = usbnet_tx_timeout,
|
|
.ndo_change_mtu = usbnet_change_mtu,
|
|
.ndo_set_mac_address = sr_set_mac_address,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_do_ioctl = sr_ioctl,
|
|
.ndo_set_rx_mode = sr_set_multicast,
|
|
};
|
|
|
|
static int sr9800_phy_powerup(struct usbnet *dev)
|
|
{
|
|
int ret;
|
|
|
|
/* set the embedded Ethernet PHY in power-down state */
|
|
ret = sr_sw_reset(dev, SR_SWRESET_IPPD | SR_SWRESET_IPRL);
|
|
if (ret < 0) {
|
|
netdev_err(dev->net, "Failed to power down PHY : %d\n", ret);
|
|
return ret;
|
|
}
|
|
msleep(20);
|
|
|
|
/* set the embedded Ethernet PHY in power-up state */
|
|
ret = sr_sw_reset(dev, SR_SWRESET_IPRL);
|
|
if (ret < 0) {
|
|
netdev_err(dev->net, "Failed to reset PHY: %d\n", ret);
|
|
return ret;
|
|
}
|
|
msleep(600);
|
|
|
|
/* set the embedded Ethernet PHY in reset state */
|
|
ret = sr_sw_reset(dev, SR_SWRESET_CLEAR);
|
|
if (ret < 0) {
|
|
netdev_err(dev->net, "Failed to power up PHY: %d\n", ret);
|
|
return ret;
|
|
}
|
|
msleep(20);
|
|
|
|
/* set the embedded Ethernet PHY in power-up state */
|
|
ret = sr_sw_reset(dev, SR_SWRESET_IPRL);
|
|
if (ret < 0) {
|
|
netdev_err(dev->net, "Failed to reset PHY: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sr9800_bind(struct usbnet *dev, struct usb_interface *intf)
|
|
{
|
|
struct sr_data *data = (struct sr_data *)&dev->data;
|
|
u16 led01_mux, led23_mux;
|
|
int ret, embd_phy;
|
|
u32 phyid;
|
|
u16 rx_ctl;
|
|
|
|
data->eeprom_len = SR9800_EEPROM_LEN;
|
|
|
|
usbnet_get_endpoints(dev, intf);
|
|
|
|
/* LED Setting Rule :
|
|
* AABB:CCDD
|
|
* AA : MFA0(LED0)
|
|
* BB : MFA1(LED1)
|
|
* CC : MFA2(LED2), Reserved for SR9800
|
|
* DD : MFA3(LED3), Reserved for SR9800
|
|
*/
|
|
led01_mux = (SR_LED_MUX_LINK_ACTIVE << 8) | SR_LED_MUX_LINK;
|
|
led23_mux = (SR_LED_MUX_LINK_ACTIVE << 8) | SR_LED_MUX_TX_ACTIVE;
|
|
ret = sr_write_cmd(dev, SR_CMD_LED_MUX, led01_mux, led23_mux, 0, NULL);
|
|
if (ret < 0) {
|
|
netdev_err(dev->net, "set LINK LED failed : %d\n", ret);
|
|
goto out;
|
|
}
|
|
|
|
/* Get the MAC address */
|
|
ret = sr_read_cmd(dev, SR_CMD_READ_NODE_ID, 0, 0, ETH_ALEN,
|
|
dev->net->dev_addr);
|
|
if (ret < 0) {
|
|
netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret);
|
|
return ret;
|
|
}
|
|
netdev_dbg(dev->net, "mac addr : %pM\n", dev->net->dev_addr);
|
|
|
|
/* Initialize MII structure */
|
|
dev->mii.dev = dev->net;
|
|
dev->mii.mdio_read = sr_mdio_read;
|
|
dev->mii.mdio_write = sr_mdio_write;
|
|
dev->mii.phy_id_mask = 0x1f;
|
|
dev->mii.reg_num_mask = 0x1f;
|
|
dev->mii.phy_id = sr_get_phy_addr(dev);
|
|
|
|
dev->net->netdev_ops = &sr9800_netdev_ops;
|
|
dev->net->ethtool_ops = &sr9800_ethtool_ops;
|
|
|
|
embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
|
|
/* Reset the PHY to normal operation mode */
|
|
ret = sr_write_cmd(dev, SR_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
|
|
if (ret < 0) {
|
|
netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Init PHY routine */
|
|
ret = sr9800_phy_powerup(dev);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
rx_ctl = sr_read_rx_ctl(dev);
|
|
netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
|
|
ret = sr_write_rx_ctl(dev, 0x0000);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
rx_ctl = sr_read_rx_ctl(dev);
|
|
netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
|
|
|
|
/* Read PHYID register *AFTER* the PHY was reset properly */
|
|
phyid = sr_get_phyid(dev);
|
|
netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid);
|
|
|
|
/* medium mode setting */
|
|
ret = sr9800_set_default_mode(dev);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
if (dev->udev->speed == USB_SPEED_HIGH) {
|
|
ret = sr_write_cmd(dev, SR_CMD_BULKIN_SIZE,
|
|
SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_4K].byte_cnt,
|
|
SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_4K].threshold,
|
|
0, NULL);
|
|
if (ret < 0) {
|
|
netdev_err(dev->net, "Reset RX_CTL failed: %d\n", ret);
|
|
goto out;
|
|
}
|
|
dev->rx_urb_size =
|
|
SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_4K].size;
|
|
} else {
|
|
ret = sr_write_cmd(dev, SR_CMD_BULKIN_SIZE,
|
|
SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_2K].byte_cnt,
|
|
SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_2K].threshold,
|
|
0, NULL);
|
|
if (ret < 0) {
|
|
netdev_err(dev->net, "Reset RX_CTL failed: %d\n", ret);
|
|
goto out;
|
|
}
|
|
dev->rx_urb_size =
|
|
SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_2K].size;
|
|
}
|
|
netdev_dbg(dev->net, "%s : setting rx_urb_size with : %zu\n", __func__,
|
|
dev->rx_urb_size);
|
|
return 0;
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static const struct driver_info sr9800_driver_info = {
|
|
.description = "CoreChip SR9800 USB 2.0 Ethernet",
|
|
.bind = sr9800_bind,
|
|
.status = sr_status,
|
|
.link_reset = sr9800_link_reset,
|
|
.reset = sr9800_reset,
|
|
.flags = DRIVER_FLAG,
|
|
.rx_fixup = sr_rx_fixup,
|
|
.tx_fixup = sr_tx_fixup,
|
|
};
|
|
|
|
static const struct usb_device_id products[] = {
|
|
{
|
|
USB_DEVICE(0x0fe6, 0x9800), /* SR9800 Device */
|
|
.driver_info = (unsigned long) &sr9800_driver_info,
|
|
},
|
|
{}, /* END */
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(usb, products);
|
|
|
|
static struct usb_driver sr_driver = {
|
|
.name = DRIVER_NAME,
|
|
.id_table = products,
|
|
.probe = usbnet_probe,
|
|
.suspend = usbnet_suspend,
|
|
.resume = usbnet_resume,
|
|
.disconnect = usbnet_disconnect,
|
|
.supports_autosuspend = 1,
|
|
};
|
|
|
|
module_usb_driver(sr_driver);
|
|
|
|
MODULE_AUTHOR("Liu Junliang <liujunliang_ljl@163.com");
|
|
MODULE_VERSION(DRIVER_VERSION);
|
|
MODULE_DESCRIPTION("SR9800 USB 2.0 USB2NET Dev : http://www.corechip-sz.com");
|
|
MODULE_LICENSE("GPL");
|