551 lines
13 KiB
C
551 lines
13 KiB
C
/*
|
|
* STMicroelectronics magnetometers driver
|
|
*
|
|
* Copyright 2012-2013 STMicroelectronics Inc.
|
|
*
|
|
* Denis Ciocca <denis.ciocca@st.com>
|
|
*
|
|
* Licensed under the GPL-2.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/types.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/buffer.h>
|
|
|
|
#include <linux/iio/common/st_sensors.h>
|
|
#include "st_magn.h"
|
|
|
|
#define ST_MAGN_NUMBER_DATA_CHANNELS 3
|
|
|
|
/* DEFAULT VALUE FOR SENSORS */
|
|
#define ST_MAGN_DEFAULT_OUT_X_H_ADDR 0X03
|
|
#define ST_MAGN_DEFAULT_OUT_Y_H_ADDR 0X07
|
|
#define ST_MAGN_DEFAULT_OUT_Z_H_ADDR 0X05
|
|
|
|
/* FULLSCALE */
|
|
#define ST_MAGN_FS_AVL_1300MG 1300
|
|
#define ST_MAGN_FS_AVL_1900MG 1900
|
|
#define ST_MAGN_FS_AVL_2500MG 2500
|
|
#define ST_MAGN_FS_AVL_4000MG 4000
|
|
#define ST_MAGN_FS_AVL_4700MG 4700
|
|
#define ST_MAGN_FS_AVL_5600MG 5600
|
|
#define ST_MAGN_FS_AVL_8000MG 8000
|
|
#define ST_MAGN_FS_AVL_8100MG 8100
|
|
#define ST_MAGN_FS_AVL_12000MG 12000
|
|
#define ST_MAGN_FS_AVL_15000MG 15000
|
|
#define ST_MAGN_FS_AVL_16000MG 16000
|
|
|
|
/* Special L addresses for Sensor 2 */
|
|
#define ST_MAGN_2_OUT_X_L_ADDR 0x28
|
|
#define ST_MAGN_2_OUT_Y_L_ADDR 0x2a
|
|
#define ST_MAGN_2_OUT_Z_L_ADDR 0x2c
|
|
|
|
/* Special L addresses for sensor 3 */
|
|
#define ST_MAGN_3_OUT_X_L_ADDR 0x68
|
|
#define ST_MAGN_3_OUT_Y_L_ADDR 0x6a
|
|
#define ST_MAGN_3_OUT_Z_L_ADDR 0x6c
|
|
|
|
static const struct iio_chan_spec st_magn_16bit_channels[] = {
|
|
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
|
|
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
|
|
ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_BE, 16, 16,
|
|
ST_MAGN_DEFAULT_OUT_X_H_ADDR),
|
|
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
|
|
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
|
|
ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_BE, 16, 16,
|
|
ST_MAGN_DEFAULT_OUT_Y_H_ADDR),
|
|
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
|
|
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
|
|
ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_BE, 16, 16,
|
|
ST_MAGN_DEFAULT_OUT_Z_H_ADDR),
|
|
IIO_CHAN_SOFT_TIMESTAMP(3)
|
|
};
|
|
|
|
static const struct iio_chan_spec st_magn_2_16bit_channels[] = {
|
|
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
|
|
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
|
|
ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
|
|
ST_MAGN_2_OUT_X_L_ADDR),
|
|
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
|
|
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
|
|
ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
|
|
ST_MAGN_2_OUT_Y_L_ADDR),
|
|
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
|
|
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
|
|
ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
|
|
ST_MAGN_2_OUT_Z_L_ADDR),
|
|
IIO_CHAN_SOFT_TIMESTAMP(3)
|
|
};
|
|
|
|
static const struct iio_chan_spec st_magn_3_16bit_channels[] = {
|
|
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
|
|
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
|
|
ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
|
|
ST_MAGN_3_OUT_X_L_ADDR),
|
|
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
|
|
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
|
|
ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
|
|
ST_MAGN_3_OUT_Y_L_ADDR),
|
|
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
|
|
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
|
|
ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
|
|
ST_MAGN_3_OUT_Z_L_ADDR),
|
|
IIO_CHAN_SOFT_TIMESTAMP(3)
|
|
};
|
|
|
|
static const struct st_sensor_settings st_magn_sensors_settings[] = {
|
|
{
|
|
.wai = 0, /* This sensor has no valid WhoAmI report 0 */
|
|
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
|
|
.sensors_supported = {
|
|
[0] = LSM303DLH_MAGN_DEV_NAME,
|
|
},
|
|
.ch = (struct iio_chan_spec *)st_magn_16bit_channels,
|
|
.odr = {
|
|
.addr = 0x00,
|
|
.mask = 0x1c,
|
|
.odr_avl = {
|
|
{ .hz = 1, .value = 0x00 },
|
|
{ .hz = 2, .value = 0x01 },
|
|
{ .hz = 3, .value = 0x02 },
|
|
{ .hz = 8, .value = 0x03 },
|
|
{ .hz = 15, .value = 0x04 },
|
|
{ .hz = 30, .value = 0x05 },
|
|
{ .hz = 75, .value = 0x06 },
|
|
/* 220 Hz, 0x07 reportedly exist */
|
|
},
|
|
},
|
|
.pw = {
|
|
.addr = 0x02,
|
|
.mask = 0x03,
|
|
.value_on = 0x00,
|
|
.value_off = 0x03,
|
|
},
|
|
.fs = {
|
|
.addr = 0x01,
|
|
.mask = 0xe0,
|
|
.fs_avl = {
|
|
[0] = {
|
|
.num = ST_MAGN_FS_AVL_1300MG,
|
|
.value = 0x01,
|
|
.gain = 1100,
|
|
.gain2 = 980,
|
|
},
|
|
[1] = {
|
|
.num = ST_MAGN_FS_AVL_1900MG,
|
|
.value = 0x02,
|
|
.gain = 855,
|
|
.gain2 = 760,
|
|
},
|
|
[2] = {
|
|
.num = ST_MAGN_FS_AVL_2500MG,
|
|
.value = 0x03,
|
|
.gain = 670,
|
|
.gain2 = 600,
|
|
},
|
|
[3] = {
|
|
.num = ST_MAGN_FS_AVL_4000MG,
|
|
.value = 0x04,
|
|
.gain = 450,
|
|
.gain2 = 400,
|
|
},
|
|
[4] = {
|
|
.num = ST_MAGN_FS_AVL_4700MG,
|
|
.value = 0x05,
|
|
.gain = 400,
|
|
.gain2 = 355,
|
|
},
|
|
[5] = {
|
|
.num = ST_MAGN_FS_AVL_5600MG,
|
|
.value = 0x06,
|
|
.gain = 330,
|
|
.gain2 = 295,
|
|
},
|
|
[6] = {
|
|
.num = ST_MAGN_FS_AVL_8100MG,
|
|
.value = 0x07,
|
|
.gain = 230,
|
|
.gain2 = 205,
|
|
},
|
|
},
|
|
},
|
|
.multi_read_bit = false,
|
|
.bootime = 2,
|
|
},
|
|
{
|
|
.wai = 0x3c,
|
|
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
|
|
.sensors_supported = {
|
|
[0] = LSM303DLHC_MAGN_DEV_NAME,
|
|
[1] = LSM303DLM_MAGN_DEV_NAME,
|
|
},
|
|
.ch = (struct iio_chan_spec *)st_magn_16bit_channels,
|
|
.odr = {
|
|
.addr = 0x00,
|
|
.mask = 0x1c,
|
|
.odr_avl = {
|
|
{ .hz = 1, .value = 0x00 },
|
|
{ .hz = 2, .value = 0x01 },
|
|
{ .hz = 3, .value = 0x02 },
|
|
{ .hz = 8, .value = 0x03 },
|
|
{ .hz = 15, .value = 0x04 },
|
|
{ .hz = 30, .value = 0x05 },
|
|
{ .hz = 75, .value = 0x06 },
|
|
{ .hz = 220, .value = 0x07 },
|
|
},
|
|
},
|
|
.pw = {
|
|
.addr = 0x02,
|
|
.mask = 0x03,
|
|
.value_on = 0x00,
|
|
.value_off = 0x03,
|
|
},
|
|
.fs = {
|
|
.addr = 0x01,
|
|
.mask = 0xe0,
|
|
.fs_avl = {
|
|
[0] = {
|
|
.num = ST_MAGN_FS_AVL_1300MG,
|
|
.value = 0x01,
|
|
.gain = 909,
|
|
.gain2 = 1020,
|
|
},
|
|
[1] = {
|
|
.num = ST_MAGN_FS_AVL_1900MG,
|
|
.value = 0x02,
|
|
.gain = 1169,
|
|
.gain2 = 1315,
|
|
},
|
|
[2] = {
|
|
.num = ST_MAGN_FS_AVL_2500MG,
|
|
.value = 0x03,
|
|
.gain = 1492,
|
|
.gain2 = 1666,
|
|
},
|
|
[3] = {
|
|
.num = ST_MAGN_FS_AVL_4000MG,
|
|
.value = 0x04,
|
|
.gain = 2222,
|
|
.gain2 = 2500,
|
|
},
|
|
[4] = {
|
|
.num = ST_MAGN_FS_AVL_4700MG,
|
|
.value = 0x05,
|
|
.gain = 2500,
|
|
.gain2 = 2816,
|
|
},
|
|
[5] = {
|
|
.num = ST_MAGN_FS_AVL_5600MG,
|
|
.value = 0x06,
|
|
.gain = 3030,
|
|
.gain2 = 3389,
|
|
},
|
|
[6] = {
|
|
.num = ST_MAGN_FS_AVL_8100MG,
|
|
.value = 0x07,
|
|
.gain = 4347,
|
|
.gain2 = 4878,
|
|
},
|
|
},
|
|
},
|
|
.multi_read_bit = false,
|
|
.bootime = 2,
|
|
},
|
|
{
|
|
.wai = 0x3d,
|
|
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
|
|
.sensors_supported = {
|
|
[0] = LIS3MDL_MAGN_DEV_NAME,
|
|
},
|
|
.ch = (struct iio_chan_spec *)st_magn_2_16bit_channels,
|
|
.odr = {
|
|
.addr = 0x20,
|
|
.mask = 0x1c,
|
|
.odr_avl = {
|
|
{ .hz = 1, .value = 0x00 },
|
|
{ .hz = 2, .value = 0x01 },
|
|
{ .hz = 3, .value = 0x02 },
|
|
{ .hz = 5, .value = 0x03 },
|
|
{ .hz = 10, .value = 0x04 },
|
|
{ .hz = 20, .value = 0x05 },
|
|
{ .hz = 40, .value = 0x06 },
|
|
{ .hz = 80, .value = 0x07 },
|
|
},
|
|
},
|
|
.pw = {
|
|
.addr = 0x22,
|
|
.mask = 0x03,
|
|
.value_on = 0x00,
|
|
.value_off = 0x03,
|
|
},
|
|
.fs = {
|
|
.addr = 0x21,
|
|
.mask = 0x60,
|
|
.fs_avl = {
|
|
[0] = {
|
|
.num = ST_MAGN_FS_AVL_4000MG,
|
|
.value = 0x00,
|
|
.gain = 146,
|
|
},
|
|
[1] = {
|
|
.num = ST_MAGN_FS_AVL_8000MG,
|
|
.value = 0x01,
|
|
.gain = 292,
|
|
},
|
|
[2] = {
|
|
.num = ST_MAGN_FS_AVL_12000MG,
|
|
.value = 0x02,
|
|
.gain = 438,
|
|
},
|
|
[3] = {
|
|
.num = ST_MAGN_FS_AVL_16000MG,
|
|
.value = 0x03,
|
|
.gain = 584,
|
|
},
|
|
},
|
|
},
|
|
.drdy_irq = {
|
|
/* drdy line is routed drdy pin */
|
|
.stat_drdy = {
|
|
.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
|
|
.mask = 0x07,
|
|
},
|
|
},
|
|
.sim = {
|
|
.addr = 0x22,
|
|
.value = BIT(2),
|
|
},
|
|
.multi_read_bit = true,
|
|
.bootime = 2,
|
|
},
|
|
{
|
|
.wai = 0x40,
|
|
.wai_addr = 0x4f,
|
|
.sensors_supported = {
|
|
[0] = LSM303AGR_MAGN_DEV_NAME,
|
|
[1] = LIS2MDL_MAGN_DEV_NAME,
|
|
},
|
|
.ch = (struct iio_chan_spec *)st_magn_3_16bit_channels,
|
|
.odr = {
|
|
.addr = 0x60,
|
|
.mask = 0x0c,
|
|
.odr_avl = {
|
|
{ .hz = 10, .value = 0x00 },
|
|
{ .hz = 20, .value = 0x01 },
|
|
{ .hz = 50, .value = 0x02 },
|
|
{ .hz = 100, .value = 0x03 },
|
|
},
|
|
},
|
|
.pw = {
|
|
.addr = 0x60,
|
|
.mask = 0x03,
|
|
.value_on = 0x00,
|
|
.value_off = 0x03,
|
|
},
|
|
.fs = {
|
|
.fs_avl = {
|
|
[0] = {
|
|
.num = ST_MAGN_FS_AVL_15000MG,
|
|
.gain = 1500,
|
|
},
|
|
},
|
|
},
|
|
.bdu = {
|
|
.addr = 0x62,
|
|
.mask = 0x10,
|
|
},
|
|
.drdy_irq = {
|
|
.int1 = {
|
|
.addr = 0x62,
|
|
.mask = 0x01,
|
|
},
|
|
.stat_drdy = {
|
|
.addr = 0x67,
|
|
.mask = 0x07,
|
|
},
|
|
},
|
|
.multi_read_bit = false,
|
|
.bootime = 2,
|
|
},
|
|
};
|
|
|
|
static int st_magn_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *ch, int *val,
|
|
int *val2, long mask)
|
|
{
|
|
int err;
|
|
struct st_sensor_data *mdata = iio_priv(indio_dev);
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
err = st_sensors_read_info_raw(indio_dev, ch, val);
|
|
if (err < 0)
|
|
goto read_error;
|
|
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
*val = 0;
|
|
if ((ch->scan_index == ST_SENSORS_SCAN_Z) &&
|
|
(mdata->current_fullscale->gain2 != 0))
|
|
*val2 = mdata->current_fullscale->gain2;
|
|
else
|
|
*val2 = mdata->current_fullscale->gain;
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
*val = mdata->odr;
|
|
return IIO_VAL_INT;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
read_error:
|
|
return err;
|
|
}
|
|
|
|
static int st_magn_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan, int val, int val2, long mask)
|
|
{
|
|
int err;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_SCALE:
|
|
err = st_sensors_set_fullscale_by_gain(indio_dev, val2);
|
|
break;
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
if (val2)
|
|
return -EINVAL;
|
|
mutex_lock(&indio_dev->mlock);
|
|
err = st_sensors_set_odr(indio_dev, val);
|
|
mutex_unlock(&indio_dev->mlock);
|
|
return err;
|
|
default:
|
|
err = -EINVAL;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL();
|
|
static ST_SENSORS_DEV_ATTR_SCALE_AVAIL(in_magn_scale_available);
|
|
|
|
static struct attribute *st_magn_attributes[] = {
|
|
&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
|
|
&iio_dev_attr_in_magn_scale_available.dev_attr.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group st_magn_attribute_group = {
|
|
.attrs = st_magn_attributes,
|
|
};
|
|
|
|
static const struct iio_info magn_info = {
|
|
.attrs = &st_magn_attribute_group,
|
|
.read_raw = &st_magn_read_raw,
|
|
.write_raw = &st_magn_write_raw,
|
|
.debugfs_reg_access = &st_sensors_debugfs_reg_access,
|
|
};
|
|
|
|
#ifdef CONFIG_IIO_TRIGGER
|
|
static const struct iio_trigger_ops st_magn_trigger_ops = {
|
|
.set_trigger_state = ST_MAGN_TRIGGER_SET_STATE,
|
|
.validate_device = st_sensors_validate_device,
|
|
};
|
|
#define ST_MAGN_TRIGGER_OPS (&st_magn_trigger_ops)
|
|
#else
|
|
#define ST_MAGN_TRIGGER_OPS NULL
|
|
#endif
|
|
|
|
int st_magn_common_probe(struct iio_dev *indio_dev)
|
|
{
|
|
struct st_sensor_data *mdata = iio_priv(indio_dev);
|
|
int irq = mdata->get_irq_data_ready(indio_dev);
|
|
int err;
|
|
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->info = &magn_info;
|
|
mutex_init(&mdata->tb.buf_lock);
|
|
|
|
err = st_sensors_power_enable(indio_dev);
|
|
if (err)
|
|
return err;
|
|
|
|
err = st_sensors_check_device_support(indio_dev,
|
|
ARRAY_SIZE(st_magn_sensors_settings),
|
|
st_magn_sensors_settings);
|
|
if (err < 0)
|
|
goto st_magn_power_off;
|
|
|
|
mdata->num_data_channels = ST_MAGN_NUMBER_DATA_CHANNELS;
|
|
mdata->multiread_bit = mdata->sensor_settings->multi_read_bit;
|
|
indio_dev->channels = mdata->sensor_settings->ch;
|
|
indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
|
|
|
|
mdata->current_fullscale = (struct st_sensor_fullscale_avl *)
|
|
&mdata->sensor_settings->fs.fs_avl[0];
|
|
mdata->odr = mdata->sensor_settings->odr.odr_avl[0].hz;
|
|
|
|
err = st_sensors_init_sensor(indio_dev, NULL);
|
|
if (err < 0)
|
|
goto st_magn_power_off;
|
|
|
|
err = st_magn_allocate_ring(indio_dev);
|
|
if (err < 0)
|
|
goto st_magn_power_off;
|
|
|
|
if (irq > 0) {
|
|
err = st_sensors_allocate_trigger(indio_dev,
|
|
ST_MAGN_TRIGGER_OPS);
|
|
if (err < 0)
|
|
goto st_magn_probe_trigger_error;
|
|
}
|
|
|
|
err = iio_device_register(indio_dev);
|
|
if (err)
|
|
goto st_magn_device_register_error;
|
|
|
|
dev_info(&indio_dev->dev, "registered magnetometer %s\n",
|
|
indio_dev->name);
|
|
|
|
return 0;
|
|
|
|
st_magn_device_register_error:
|
|
if (irq > 0)
|
|
st_sensors_deallocate_trigger(indio_dev);
|
|
st_magn_probe_trigger_error:
|
|
st_magn_deallocate_ring(indio_dev);
|
|
st_magn_power_off:
|
|
st_sensors_power_disable(indio_dev);
|
|
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL(st_magn_common_probe);
|
|
|
|
void st_magn_common_remove(struct iio_dev *indio_dev)
|
|
{
|
|
struct st_sensor_data *mdata = iio_priv(indio_dev);
|
|
|
|
st_sensors_power_disable(indio_dev);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
if (mdata->get_irq_data_ready(indio_dev) > 0)
|
|
st_sensors_deallocate_trigger(indio_dev);
|
|
|
|
st_magn_deallocate_ring(indio_dev);
|
|
}
|
|
EXPORT_SYMBOL(st_magn_common_remove);
|
|
|
|
MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
|
|
MODULE_DESCRIPTION("STMicroelectronics magnetometers driver");
|
|
MODULE_LICENSE("GPL v2");
|