linux-sg2042/drivers/net/cxgb3/aq100x.c

355 lines
8.7 KiB
C

/*
* Copyright (c) 2005-2008 Chelsio, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include "common.h"
#include "regs.h"
enum {
/* MDIO_DEV_PMA_PMD registers */
AQ_LINK_STAT = 0xe800,
AQ_IMASK_PMA = 0xf000,
/* MDIO_DEV_XGXS registers */
AQ_XAUI_RX_CFG = 0xc400,
AQ_XAUI_TX_CFG = 0xe400,
/* MDIO_DEV_ANEG registers */
AQ_1G_CTRL = 0xc400,
AQ_ANEG_STAT = 0xc800,
/* MDIO_DEV_VEND1 registers */
AQ_FW_VERSION = 0x0020,
AQ_IFLAG_GLOBAL = 0xfc00,
AQ_IMASK_GLOBAL = 0xff00,
};
enum {
IMASK_PMA = 1 << 2,
IMASK_GLOBAL = 1 << 15,
ADV_1G_FULL = 1 << 15,
ADV_1G_HALF = 1 << 14,
ADV_10G_FULL = 1 << 12,
AQ_RESET = (1 << 14) | (1 << 15),
AQ_LOWPOWER = 1 << 12,
};
static int aq100x_reset(struct cphy *phy, int wait)
{
/*
* Ignore the caller specified wait time; always wait for the reset to
* complete. Can take up to 3s.
*/
int err = t3_phy_reset(phy, MDIO_MMD_VEND1, 3000);
if (err)
CH_WARN(phy->adapter, "PHY%d: reset failed (0x%x).\n",
phy->mdio.prtad, err);
return err;
}
static int aq100x_intr_enable(struct cphy *phy)
{
int err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AQ_IMASK_PMA, IMASK_PMA);
if (err)
return err;
err = t3_mdio_write(phy, MDIO_MMD_VEND1, AQ_IMASK_GLOBAL, IMASK_GLOBAL);
return err;
}
static int aq100x_intr_disable(struct cphy *phy)
{
return t3_mdio_write(phy, MDIO_MMD_VEND1, AQ_IMASK_GLOBAL, 0);
}
static int aq100x_intr_clear(struct cphy *phy)
{
unsigned int v;
t3_mdio_read(phy, MDIO_MMD_VEND1, AQ_IFLAG_GLOBAL, &v);
t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_STAT1, &v);
return 0;
}
static int aq100x_intr_handler(struct cphy *phy)
{
int err;
unsigned int cause, v;
err = t3_mdio_read(phy, MDIO_MMD_VEND1, AQ_IFLAG_GLOBAL, &cause);
if (err)
return err;
/* Read (and reset) the latching version of the status */
t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_STAT1, &v);
return cphy_cause_link_change;
}
static int aq100x_power_down(struct cphy *phy, int off)
{
return mdio_set_flag(&phy->mdio, phy->mdio.prtad,
MDIO_MMD_PMAPMD, MDIO_CTRL1,
MDIO_CTRL1_LPOWER, off);
}
static int aq100x_autoneg_enable(struct cphy *phy)
{
int err;
err = aq100x_power_down(phy, 0);
if (!err)
err = mdio_set_flag(&phy->mdio, phy->mdio.prtad,
MDIO_MMD_AN, MDIO_CTRL1,
BMCR_ANENABLE | BMCR_ANRESTART, 1);
return err;
}
static int aq100x_autoneg_restart(struct cphy *phy)
{
int err;
err = aq100x_power_down(phy, 0);
if (!err)
err = mdio_set_flag(&phy->mdio, phy->mdio.prtad,
MDIO_MMD_AN, MDIO_CTRL1,
BMCR_ANENABLE | BMCR_ANRESTART, 1);
return err;
}
static int aq100x_advertise(struct cphy *phy, unsigned int advertise_map)
{
unsigned int adv;
int err;
/* 10G advertisement */
adv = 0;
if (advertise_map & ADVERTISED_10000baseT_Full)
adv |= ADV_10G_FULL;
err = t3_mdio_change_bits(phy, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
ADV_10G_FULL, adv);
if (err)
return err;
/* 1G advertisement */
adv = 0;
if (advertise_map & ADVERTISED_1000baseT_Full)
adv |= ADV_1G_FULL;
if (advertise_map & ADVERTISED_1000baseT_Half)
adv |= ADV_1G_HALF;
err = t3_mdio_change_bits(phy, MDIO_MMD_AN, AQ_1G_CTRL,
ADV_1G_FULL | ADV_1G_HALF, adv);
if (err)
return err;
/* 100M, pause advertisement */
adv = 0;
if (advertise_map & ADVERTISED_100baseT_Half)
adv |= ADVERTISE_100HALF;
if (advertise_map & ADVERTISED_100baseT_Full)
adv |= ADVERTISE_100FULL;
if (advertise_map & ADVERTISED_Pause)
adv |= ADVERTISE_PAUSE_CAP;
if (advertise_map & ADVERTISED_Asym_Pause)
adv |= ADVERTISE_PAUSE_ASYM;
err = t3_mdio_change_bits(phy, MDIO_MMD_AN, MDIO_AN_ADVERTISE,
0xfe0, adv);
return err;
}
static int aq100x_set_loopback(struct cphy *phy, int mmd, int dir, int enable)
{
return mdio_set_flag(&phy->mdio, phy->mdio.prtad,
MDIO_MMD_PMAPMD, MDIO_CTRL1,
BMCR_LOOPBACK, enable);
}
static int aq100x_set_speed_duplex(struct cphy *phy, int speed, int duplex)
{
/* no can do */
return -1;
}
static int aq100x_get_link_status(struct cphy *phy, int *link_ok,
int *speed, int *duplex, int *fc)
{
int err;
unsigned int v;
if (link_ok) {
err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AQ_LINK_STAT, &v);
if (err)
return err;
*link_ok = v & 1;
if (!*link_ok)
return 0;
}
err = t3_mdio_read(phy, MDIO_MMD_AN, AQ_ANEG_STAT, &v);
if (err)
return err;
if (speed) {
switch (v & 0x6) {
case 0x6:
*speed = SPEED_10000;
break;
case 0x4:
*speed = SPEED_1000;
break;
case 0x2:
*speed = SPEED_100;
break;
case 0x0:
*speed = SPEED_10;
break;
}
}
if (duplex)
*duplex = v & 1 ? DUPLEX_FULL : DUPLEX_HALF;
return 0;
}
static struct cphy_ops aq100x_ops = {
.reset = aq100x_reset,
.intr_enable = aq100x_intr_enable,
.intr_disable = aq100x_intr_disable,
.intr_clear = aq100x_intr_clear,
.intr_handler = aq100x_intr_handler,
.autoneg_enable = aq100x_autoneg_enable,
.autoneg_restart = aq100x_autoneg_restart,
.advertise = aq100x_advertise,
.set_loopback = aq100x_set_loopback,
.set_speed_duplex = aq100x_set_speed_duplex,
.get_link_status = aq100x_get_link_status,
.power_down = aq100x_power_down,
.mmds = MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | MDIO_DEVS_PHYXS,
};
int t3_aq100x_phy_prep(struct cphy *phy, struct adapter *adapter, int phy_addr,
const struct mdio_ops *mdio_ops)
{
unsigned int v, v2, gpio, wait;
int err;
cphy_init(phy, adapter, phy_addr, &aq100x_ops, mdio_ops,
SUPPORTED_1000baseT_Full | SUPPORTED_10000baseT_Full |
SUPPORTED_TP | SUPPORTED_Autoneg | SUPPORTED_AUI,
"1000/10GBASE-T");
/*
* The PHY has been out of reset ever since the system powered up. So
* we do a hard reset over here.
*/
gpio = phy_addr ? F_GPIO10_OUT_VAL : F_GPIO6_OUT_VAL;
t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, gpio, 0);
msleep(1);
t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, gpio, gpio);
/*
* Give it enough time to load the firmware and get ready for mdio.
*/
msleep(1000);
wait = 500; /* in 10ms increments */
do {
err = t3_mdio_read(phy, MDIO_MMD_VEND1, MDIO_CTRL1, &v);
if (err || v == 0xffff) {
/* Allow prep_adapter to succeed when ffff is read */
CH_WARN(adapter, "PHY%d: reset failed (0x%x, 0x%x).\n",
phy_addr, err, v);
goto done;
}
v &= AQ_RESET;
if (v)
msleep(10);
} while (v && --wait);
if (v) {
CH_WARN(adapter, "PHY%d: reset timed out (0x%x).\n",
phy_addr, v);
goto done; /* let prep_adapter succeed */
}
/* Datasheet says 3s max but this has been observed */
wait = (500 - wait) * 10 + 1000;
if (wait > 3000)
CH_WARN(adapter, "PHY%d: reset took %ums\n", phy_addr, wait);
/* Firmware version check. */
t3_mdio_read(phy, MDIO_MMD_VEND1, AQ_FW_VERSION, &v);
if (v != 101)
CH_WARN(adapter, "PHY%d: unsupported firmware %d\n",
phy_addr, v);
/*
* The PHY should start in really-low-power mode. Prepare it for normal
* operations.
*/
err = t3_mdio_read(phy, MDIO_MMD_VEND1, MDIO_CTRL1, &v);
if (err)
return err;
if (v & AQ_LOWPOWER) {
err = t3_mdio_change_bits(phy, MDIO_MMD_VEND1, MDIO_CTRL1,
AQ_LOWPOWER, 0);
if (err)
return err;
msleep(10);
} else
CH_WARN(adapter, "PHY%d does not start in low power mode.\n",
phy_addr);
/*
* Verify XAUI settings, but let prep succeed no matter what.
*/
v = v2 = 0;
t3_mdio_read(phy, MDIO_MMD_PHYXS, AQ_XAUI_RX_CFG, &v);
t3_mdio_read(phy, MDIO_MMD_PHYXS, AQ_XAUI_TX_CFG, &v2);
if (v != 0x1b || v2 != 0x1b)
CH_WARN(adapter,
"PHY%d: incorrect XAUI settings (0x%x, 0x%x).\n",
phy_addr, v, v2);
done:
return err;
}