linux-sg2042/drivers/usb
Valentina Manea b7945b77cd staging: usbip: convert usbip-host driver to usb_device_driver
This driver was previously an interface driver. Since USB/IP
exports a whole device, not just an interface, it would make
sense to be a device driver.

This patch also modifies the way userspace sees and uses a
shared device:

* the usbip_status file is no longer created for interface 0, but for
the whole device (such as
/sys/devices/pci0000:00/0000:00:01.2/usb1/1-1/usbip_status).
* per interface information, such as interface class or protocol, is
no longer sent/received; only device specific information is
transmitted.
* since the driver was moved one level below in the USB architecture,
there is no need to bind/unbind each interface, just the device as a
whole.

Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-07 10:54:30 -08:00
..
atm usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00
c67x00 USB: c67x00: correct spelling mistakes in comments 2014-01-08 15:05:14 -08:00
chipidea usb: chipidea: udc: using MultO at TD as real mult value for ISO-TX 2014-01-13 15:55:19 -08:00
class usb: cdc-wdm: resp_count can be 0 even if WDM_READ is set 2014-01-12 20:13:28 -08:00
core staging: usbip: convert usbip-host driver to usb_device_driver 2014-02-07 10:54:30 -08:00
dwc2 USB patches for 3.14-rc1 2014-01-20 16:13:02 -08:00
dwc3 Merge 3.13-rc5 into usb-next 2013-12-24 10:18:03 -08:00
early USB: ehci-dbgp: drop dead code. 2013-09-26 16:25:21 -07:00
gadget ARM: SoC cleanups for 3.14 2014-01-23 18:36:55 -08:00
host Merge remote-tracking branch 'agust/next' into next 2014-01-29 16:53:55 +11:00
image USB: image: correct spelling mistake in comment 2014-01-08 15:08:14 -08:00
misc usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00
mon USB: regroup all depends on USB within an if USB block 2013-04-09 16:49:07 -07:00
musb usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00
phy ARM: driver updates for 3.14 2014-01-23 18:49:36 -08:00
renesas_usbhs usb: changes for v3.14 merge window 2014-01-03 12:15:10 -08:00
serial Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial 2014-01-22 21:21:55 -08:00
storage usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00
wusbcore usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00
Kconfig USB patches for 3.14-rc1 2014-01-20 16:13:02 -08:00
Makefile Move DWC2 driver out of staging 2014-01-13 14:44:01 -08:00
README
usb-common.c usb: common: introduce of_usb_get_maximum_speed() 2013-07-29 13:56:46 +03:00
usb-skeleton.c usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.