linux-sg2042/drivers/cpuidle
Rafael J. Wysocki 148519120c Revert "cpuidle: Quickly notice prediction failure for repeat mode"
Revert commit 69a37bea (cpuidle: Quickly notice prediction failure for
repeat mode), because it has been identified as the source of a
significant performance regression in v3.8 and later as explained by
Jeremy Eder:

  We believe we've identified a particular commit to the cpuidle code
  that seems to be impacting performance of variety of workloads.
  The simplest way to reproduce is using netperf TCP_RR test, so
  we're using that, on a pair of Sandy Bridge based servers.  We also
  have data from a large database setup where performance is also
  measurably/positively impacted, though that test data isn't easily
  share-able.

  Included below are test results from 3 test kernels:

  kernel       reverts
  -----------------------------------------------------------
  1) vanilla   upstream (no reverts)

  2) perfteam2 reverts e11538d1f0

  3) test      reverts 69a37beabf
                       e11538d1f0

  In summary, netperf TCP_RR numbers improve by approximately 4%
  after reverting 69a37beabf.  When
  69a37beabf is included, C0 residency
  never seems to get above 40%.  Taking that patch out gets C0 near
  100% quite often, and performance increases.

  The below data are histograms representing the %c0 residency @
  1-second sample rates (using turbostat), while under netperf test.

  - If you look at the first 4 histograms, you can see %c0 residency
    almost entirely in the 30,40% bin.
  - The last pair, which reverts 69a37beabf,
    shows %c0 in the 80,90,100% bins.

  Below each kernel name are netperf TCP_RR trans/s numbers for the
  particular kernel that can be disclosed publicly, comparing the 3
  test kernels.  We ran a 4th test with the vanilla kernel where
  we've also set /dev/cpu_dma_latency=0 to show overall impact
  boosting single-threaded TCP_RR performance over 11% above
  baseline.

  3.10-rc2 vanilla RX + c0 lock (/dev/cpu_dma_latency=0):
  TCP_RR trans/s 54323.78

  -----------------------------------------------------------
  3.10-rc2 vanilla RX (no reverts)
  TCP_RR trans/s 48192.47

  Receiver %c0
      0.0000 -    10.0000 [     1]: *
     10.0000 -    20.0000 [     0]:
     20.0000 -    30.0000 [     0]:
     30.0000 -    40.0000 [    59]:
  ***********************************************************
     40.0000 -    50.0000 [     1]: *
     50.0000 -    60.0000 [     0]:
     60.0000 -    70.0000 [     0]:
     70.0000 -    80.0000 [     0]:
     80.0000 -    90.0000 [     0]:
     90.0000 -   100.0000 [     0]:

  Sender %c0
      0.0000 -    10.0000 [     1]: *
     10.0000 -    20.0000 [     0]:
     20.0000 -    30.0000 [     0]:
     30.0000 -    40.0000 [    11]: ***********
     40.0000 -    50.0000 [    49]:
  *************************************************
     50.0000 -    60.0000 [     0]:
     60.0000 -    70.0000 [     0]:
     70.0000 -    80.0000 [     0]:
     80.0000 -    90.0000 [     0]:
     90.0000 -   100.0000 [     0]:

  -----------------------------------------------------------
  3.10-rc2 perfteam2 RX (reverts commit
  e11538d1f0)
  TCP_RR trans/s 49698.69

  Receiver %c0
      0.0000 -    10.0000 [     1]: *
     10.0000 -    20.0000 [     1]: *
     20.0000 -    30.0000 [     0]:
     30.0000 -    40.0000 [    59]:
  ***********************************************************
     40.0000 -    50.0000 [     0]:
     50.0000 -    60.0000 [     0]:
     60.0000 -    70.0000 [     0]:
     70.0000 -    80.0000 [     0]:
     80.0000 -    90.0000 [     0]:
     90.0000 -   100.0000 [     0]:

  Sender %c0
      0.0000 -    10.0000 [     1]: *
     10.0000 -    20.0000 [     0]:
     20.0000 -    30.0000 [     0]:
     30.0000 -    40.0000 [     2]: **
     40.0000 -    50.0000 [    58]:
  **********************************************************
     50.0000 -    60.0000 [     0]:
     60.0000 -    70.0000 [     0]:
     70.0000 -    80.0000 [     0]:
     80.0000 -    90.0000 [     0]:
     90.0000 -   100.0000 [     0]:

  -----------------------------------------------------------
  3.10-rc2 test RX (reverts 69a37beabf
  and e11538d1f0)
  TCP_RR trans/s 47766.95

  Receiver %c0
      0.0000 -    10.0000 [     1]: *
     10.0000 -    20.0000 [     1]: *
     20.0000 -    30.0000 [     0]:
     30.0000 -    40.0000 [    27]: ***************************
     40.0000 -    50.0000 [     2]: **
     50.0000 -    60.0000 [     0]:
     60.0000 -    70.0000 [     2]: **
     70.0000 -    80.0000 [     0]:
     80.0000 -    90.0000 [     0]:
     90.0000 -   100.0000 [    28]: ****************************

  Sender:
      0.0000 -    10.0000 [     1]: *
     10.0000 -    20.0000 [     0]:
     20.0000 -    30.0000 [     0]:
     30.0000 -    40.0000 [    11]: ***********
     40.0000 -    50.0000 [     0]:
     50.0000 -    60.0000 [     1]: *
     60.0000 -    70.0000 [     0]:
     70.0000 -    80.0000 [     3]: ***
     80.0000 -    90.0000 [     7]: *******
     90.0000 -   100.0000 [    38]: **************************************

  These results demonstrate gaining back the tendency of the CPU to
  stay in more responsive, performant C-states (and thus yield
  measurably better performance), by reverting commit
  69a37beabf.

Requested-by: Jeremy Eder <jeder@redhat.com>
Tested-by: Len Brown <len.brown@intel.com>
Cc: 3.8+ <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-29 13:32:29 +02:00
..
governors Revert "cpuidle: Quickly notice prediction failure for repeat mode" 2013-07-29 13:32:29 +02:00
Kconfig Power management and ACPI updates for 3.11-rc1 2013-07-03 14:35:40 -07:00
Makefile ARM: zynq: Add cpuidle support 2013-06-05 14:04:26 +02:00
coupled.c cpuidle / coupled: fix ready counter decrement 2013-01-03 13:11:05 +01:00
cpuidle-calxeda.c ARM: introduce common set_auxcr/get_auxcr functions 2013-05-29 15:50:34 -04:00
cpuidle-kirkwood.c cpuidle: add maintainer entry 2013-04-26 22:30:25 +02:00
cpuidle-zynq.c ARM: zynq: Add cpuidle support 2013-06-05 14:04:26 +02:00
cpuidle.c cpuidle: simplify multiple driver support 2013-06-11 13:42:38 +02:00
cpuidle.h cpuidle: support multiple drivers 2012-11-15 00:34:23 +01:00
driver.c cpuidle: Comment the driver's framework code 2013-06-11 14:18:33 +02:00
governor.c cpuidle: create bootparam "cpuidle.off=1" 2011-08-03 19:06:36 -04:00
sysfs.c cpuidle: fix number of initialized/destroyed states 2013-01-11 23:20:09 +01:00