linux-sg2042/drivers/media/common/b2c2/flexcop-common.h

186 lines
5.6 KiB
C

/*
* Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
* flexcop-common.h - common header file for device-specific source files
* see flexcop.c for copyright information
*/
#ifndef __FLEXCOP_COMMON_H__
#define __FLEXCOP_COMMON_H__
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/mutex.h>
#include "flexcop-reg.h"
#include "dmxdev.h"
#include "dvb_demux.h"
#include "dvb_filter.h"
#include "dvb_net.h"
#include "dvb_frontend.h"
#define FC_MAX_FEED 256
#ifndef FC_LOG_PREFIX
#warning please define a log prefix for your file, using a default one
#define FC_LOG_PREFIX "b2c2-undef"
#endif
/* Steal from usb.h */
#undef err
#define err(format, arg...) \
printk(KERN_ERR FC_LOG_PREFIX ": " format "\n" , ## arg)
#undef info
#define info(format, arg...) \
printk(KERN_INFO FC_LOG_PREFIX ": " format "\n" , ## arg)
#undef warn
#define warn(format, arg...) \
printk(KERN_WARNING FC_LOG_PREFIX ": " format "\n" , ## arg)
struct flexcop_dma {
struct pci_dev *pdev;
u8 *cpu_addr0;
dma_addr_t dma_addr0;
u8 *cpu_addr1;
dma_addr_t dma_addr1;
u32 size; /* size of each address in bytes */
};
struct flexcop_i2c_adapter {
struct flexcop_device *fc;
struct i2c_adapter i2c_adap;
u8 no_base_addr;
flexcop_i2c_port_t port;
};
/* Control structure for data definitions that are common to
* the B2C2-based PCI and USB devices.
*/
struct flexcop_device {
/* general */
struct device *dev; /* for firmware_class */
#define FC_STATE_DVB_INIT 0x01
#define FC_STATE_I2C_INIT 0x02
#define FC_STATE_FE_INIT 0x04
int init_state;
/* device information */
int has_32_hw_pid_filter;
flexcop_revision_t rev;
flexcop_device_type_t dev_type;
flexcop_bus_t bus_type;
/* dvb stuff */
struct dvb_adapter dvb_adapter;
struct dvb_frontend *fe;
struct dvb_net dvbnet;
struct dvb_demux demux;
struct dmxdev dmxdev;
struct dmx_frontend hw_frontend;
struct dmx_frontend mem_frontend;
int (*fe_sleep) (struct dvb_frontend *);
struct flexcop_i2c_adapter fc_i2c_adap[3];
struct mutex i2c_mutex;
struct module *owner;
/* options and status */
int extra_feedcount;
int feedcount;
int pid_filtering;
int fullts_streaming_state;
/* bus specific callbacks */
flexcop_ibi_value(*read_ibi_reg) (struct flexcop_device *,
flexcop_ibi_register);
int (*write_ibi_reg) (struct flexcop_device *,
flexcop_ibi_register, flexcop_ibi_value);
int (*i2c_request) (struct flexcop_i2c_adapter *,
flexcop_access_op_t, u8 chipaddr, u8 addr, u8 *buf, u16 len);
int (*stream_control) (struct flexcop_device *, int);
int (*get_mac_addr) (struct flexcop_device *fc, int extended);
void *bus_specific;
};
/* exported prototypes */
/* from flexcop.c */
void flexcop_pass_dmx_data(struct flexcop_device *fc, u8 *buf, u32 len);
void flexcop_pass_dmx_packets(struct flexcop_device *fc, u8 *buf, u32 no);
struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len);
void flexcop_device_kfree(struct flexcop_device *);
int flexcop_device_initialize(struct flexcop_device *);
void flexcop_device_exit(struct flexcop_device *fc);
void flexcop_reset_block_300(struct flexcop_device *fc);
/* from flexcop-dma.c */
int flexcop_dma_allocate(struct pci_dev *pdev,
struct flexcop_dma *dma, u32 size);
void flexcop_dma_free(struct flexcop_dma *dma);
int flexcop_dma_control_timer_irq(struct flexcop_device *fc,
flexcop_dma_index_t no, int onoff);
int flexcop_dma_control_size_irq(struct flexcop_device *fc,
flexcop_dma_index_t no, int onoff);
int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma,
flexcop_dma_index_t dma_idx);
int flexcop_dma_xfer_control(struct flexcop_device *fc,
flexcop_dma_index_t dma_idx, flexcop_dma_addr_index_t index,
int onoff);
int flexcop_dma_config_timer(struct flexcop_device *fc,
flexcop_dma_index_t dma_idx, u8 cycles);
/* from flexcop-eeprom.c */
/* the PCI part uses this call to get the MAC address, the USB part has its own */
int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended);
/* from flexcop-i2c.c */
/* the PCI part uses this a i2c_request callback, whereas the usb part has its own
* one. We have it in flexcop-i2c.c, because it is going via the actual
* I2C-channel of the flexcop.
*/
int flexcop_i2c_request(struct flexcop_i2c_adapter*, flexcop_access_op_t,
u8 chipaddr, u8 addr, u8 *buf, u16 len);
/* from flexcop-sram.c */
int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest,
flexcop_sram_dest_target_t target);
void flexcop_wan_set_speed(struct flexcop_device *fc, flexcop_wan_speed_t s);
void flexcop_sram_ctrl(struct flexcop_device *fc,
int usb_wan, int sramdma, int maximumfill);
/* global prototypes for the flexcop-chip */
/* from flexcop-fe-tuner.c */
int flexcop_frontend_init(struct flexcop_device *fc);
void flexcop_frontend_exit(struct flexcop_device *fc);
/* from flexcop-i2c.c */
int flexcop_i2c_init(struct flexcop_device *fc);
void flexcop_i2c_exit(struct flexcop_device *fc);
/* from flexcop-sram.c */
int flexcop_sram_init(struct flexcop_device *fc);
/* from flexcop-misc.c */
void flexcop_determine_revision(struct flexcop_device *fc);
void flexcop_device_name(struct flexcop_device *fc,
const char *prefix, const char *suffix);
void flexcop_dump_reg(struct flexcop_device *fc,
flexcop_ibi_register reg, int num);
/* from flexcop-hw-filter.c */
int flexcop_pid_feed_control(struct flexcop_device *fc,
struct dvb_demux_feed *dvbdmxfeed, int onoff);
void flexcop_hw_filter_init(struct flexcop_device *fc);
void flexcop_smc_ctrl(struct flexcop_device *fc, int onoff);
void flexcop_set_mac_filter(struct flexcop_device *fc, u8 mac[6]);
void flexcop_mac_filter_ctrl(struct flexcop_device *fc, int onoff);
#endif