408 lines
11 KiB
C
408 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
//
|
|
// soc-dai.c
|
|
//
|
|
// Copyright (C) 2019 Renesas Electronics Corp.
|
|
// Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
|
|
//
|
|
|
|
#include <sound/soc.h>
|
|
#include <sound/soc-dai.h>
|
|
|
|
/**
|
|
* snd_soc_dai_set_sysclk - configure DAI system or master clock.
|
|
* @dai: DAI
|
|
* @clk_id: DAI specific clock ID
|
|
* @freq: new clock frequency in Hz
|
|
* @dir: new clock direction - input/output.
|
|
*
|
|
* Configures the DAI master (MCLK) or system (SYSCLK) clocking.
|
|
*/
|
|
int snd_soc_dai_set_sysclk(struct snd_soc_dai *dai, int clk_id,
|
|
unsigned int freq, int dir)
|
|
{
|
|
if (dai->driver->ops->set_sysclk)
|
|
return dai->driver->ops->set_sysclk(dai, clk_id, freq, dir);
|
|
|
|
return snd_soc_component_set_sysclk(dai->component, clk_id, 0,
|
|
freq, dir);
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dai_set_sysclk);
|
|
|
|
/**
|
|
* snd_soc_dai_set_clkdiv - configure DAI clock dividers.
|
|
* @dai: DAI
|
|
* @div_id: DAI specific clock divider ID
|
|
* @div: new clock divisor.
|
|
*
|
|
* Configures the clock dividers. This is used to derive the best DAI bit and
|
|
* frame clocks from the system or master clock. It's best to set the DAI bit
|
|
* and frame clocks as low as possible to save system power.
|
|
*/
|
|
int snd_soc_dai_set_clkdiv(struct snd_soc_dai *dai,
|
|
int div_id, int div)
|
|
{
|
|
if (dai->driver->ops->set_clkdiv)
|
|
return dai->driver->ops->set_clkdiv(dai, div_id, div);
|
|
else
|
|
return -EINVAL;
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dai_set_clkdiv);
|
|
|
|
/**
|
|
* snd_soc_dai_set_pll - configure DAI PLL.
|
|
* @dai: DAI
|
|
* @pll_id: DAI specific PLL ID
|
|
* @source: DAI specific source for the PLL
|
|
* @freq_in: PLL input clock frequency in Hz
|
|
* @freq_out: requested PLL output clock frequency in Hz
|
|
*
|
|
* Configures and enables PLL to generate output clock based on input clock.
|
|
*/
|
|
int snd_soc_dai_set_pll(struct snd_soc_dai *dai, int pll_id, int source,
|
|
unsigned int freq_in, unsigned int freq_out)
|
|
{
|
|
if (dai->driver->ops->set_pll)
|
|
return dai->driver->ops->set_pll(dai, pll_id, source,
|
|
freq_in, freq_out);
|
|
|
|
return snd_soc_component_set_pll(dai->component, pll_id, source,
|
|
freq_in, freq_out);
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dai_set_pll);
|
|
|
|
/**
|
|
* snd_soc_dai_set_bclk_ratio - configure BCLK to sample rate ratio.
|
|
* @dai: DAI
|
|
* @ratio: Ratio of BCLK to Sample rate.
|
|
*
|
|
* Configures the DAI for a preset BCLK to sample rate ratio.
|
|
*/
|
|
int snd_soc_dai_set_bclk_ratio(struct snd_soc_dai *dai, unsigned int ratio)
|
|
{
|
|
if (dai->driver->ops->set_bclk_ratio)
|
|
return dai->driver->ops->set_bclk_ratio(dai, ratio);
|
|
else
|
|
return -EINVAL;
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dai_set_bclk_ratio);
|
|
|
|
/**
|
|
* snd_soc_dai_set_fmt - configure DAI hardware audio format.
|
|
* @dai: DAI
|
|
* @fmt: SND_SOC_DAIFMT_* format value.
|
|
*
|
|
* Configures the DAI hardware format and clocking.
|
|
*/
|
|
int snd_soc_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
|
|
{
|
|
if (dai->driver->ops->set_fmt == NULL)
|
|
return -ENOTSUPP;
|
|
return dai->driver->ops->set_fmt(dai, fmt);
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dai_set_fmt);
|
|
|
|
/**
|
|
* snd_soc_xlate_tdm_slot - generate tx/rx slot mask.
|
|
* @slots: Number of slots in use.
|
|
* @tx_mask: bitmask representing active TX slots.
|
|
* @rx_mask: bitmask representing active RX slots.
|
|
*
|
|
* Generates the TDM tx and rx slot default masks for DAI.
|
|
*/
|
|
static int snd_soc_xlate_tdm_slot_mask(unsigned int slots,
|
|
unsigned int *tx_mask,
|
|
unsigned int *rx_mask)
|
|
{
|
|
if (*tx_mask || *rx_mask)
|
|
return 0;
|
|
|
|
if (!slots)
|
|
return -EINVAL;
|
|
|
|
*tx_mask = (1 << slots) - 1;
|
|
*rx_mask = (1 << slots) - 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* snd_soc_dai_set_tdm_slot() - Configures a DAI for TDM operation
|
|
* @dai: The DAI to configure
|
|
* @tx_mask: bitmask representing active TX slots.
|
|
* @rx_mask: bitmask representing active RX slots.
|
|
* @slots: Number of slots in use.
|
|
* @slot_width: Width in bits for each slot.
|
|
*
|
|
* This function configures the specified DAI for TDM operation. @slot contains
|
|
* the total number of slots of the TDM stream and @slot_with the width of each
|
|
* slot in bit clock cycles. @tx_mask and @rx_mask are bitmasks specifying the
|
|
* active slots of the TDM stream for the specified DAI, i.e. which slots the
|
|
* DAI should write to or read from. If a bit is set the corresponding slot is
|
|
* active, if a bit is cleared the corresponding slot is inactive. Bit 0 maps to
|
|
* the first slot, bit 1 to the second slot and so on. The first active slot
|
|
* maps to the first channel of the DAI, the second active slot to the second
|
|
* channel and so on.
|
|
*
|
|
* TDM mode can be disabled by passing 0 for @slots. In this case @tx_mask,
|
|
* @rx_mask and @slot_width will be ignored.
|
|
*
|
|
* Returns 0 on success, a negative error code otherwise.
|
|
*/
|
|
int snd_soc_dai_set_tdm_slot(struct snd_soc_dai *dai,
|
|
unsigned int tx_mask, unsigned int rx_mask,
|
|
int slots, int slot_width)
|
|
{
|
|
if (dai->driver->ops->xlate_tdm_slot_mask)
|
|
dai->driver->ops->xlate_tdm_slot_mask(slots,
|
|
&tx_mask, &rx_mask);
|
|
else
|
|
snd_soc_xlate_tdm_slot_mask(slots, &tx_mask, &rx_mask);
|
|
|
|
dai->tx_mask = tx_mask;
|
|
dai->rx_mask = rx_mask;
|
|
|
|
if (dai->driver->ops->set_tdm_slot)
|
|
return dai->driver->ops->set_tdm_slot(dai, tx_mask, rx_mask,
|
|
slots, slot_width);
|
|
else
|
|
return -ENOTSUPP;
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dai_set_tdm_slot);
|
|
|
|
/**
|
|
* snd_soc_dai_set_channel_map - configure DAI audio channel map
|
|
* @dai: DAI
|
|
* @tx_num: how many TX channels
|
|
* @tx_slot: pointer to an array which imply the TX slot number channel
|
|
* 0~num-1 uses
|
|
* @rx_num: how many RX channels
|
|
* @rx_slot: pointer to an array which imply the RX slot number channel
|
|
* 0~num-1 uses
|
|
*
|
|
* configure the relationship between channel number and TDM slot number.
|
|
*/
|
|
int snd_soc_dai_set_channel_map(struct snd_soc_dai *dai,
|
|
unsigned int tx_num, unsigned int *tx_slot,
|
|
unsigned int rx_num, unsigned int *rx_slot)
|
|
{
|
|
if (dai->driver->ops->set_channel_map)
|
|
return dai->driver->ops->set_channel_map(dai, tx_num, tx_slot,
|
|
rx_num, rx_slot);
|
|
else
|
|
return -ENOTSUPP;
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dai_set_channel_map);
|
|
|
|
/**
|
|
* snd_soc_dai_get_channel_map - Get DAI audio channel map
|
|
* @dai: DAI
|
|
* @tx_num: how many TX channels
|
|
* @tx_slot: pointer to an array which imply the TX slot number channel
|
|
* 0~num-1 uses
|
|
* @rx_num: how many RX channels
|
|
* @rx_slot: pointer to an array which imply the RX slot number channel
|
|
* 0~num-1 uses
|
|
*/
|
|
int snd_soc_dai_get_channel_map(struct snd_soc_dai *dai,
|
|
unsigned int *tx_num, unsigned int *tx_slot,
|
|
unsigned int *rx_num, unsigned int *rx_slot)
|
|
{
|
|
if (dai->driver->ops->get_channel_map)
|
|
return dai->driver->ops->get_channel_map(dai, tx_num, tx_slot,
|
|
rx_num, rx_slot);
|
|
else
|
|
return -ENOTSUPP;
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dai_get_channel_map);
|
|
|
|
/**
|
|
* snd_soc_dai_set_tristate - configure DAI system or master clock.
|
|
* @dai: DAI
|
|
* @tristate: tristate enable
|
|
*
|
|
* Tristates the DAI so that others can use it.
|
|
*/
|
|
int snd_soc_dai_set_tristate(struct snd_soc_dai *dai, int tristate)
|
|
{
|
|
if (dai->driver->ops->set_tristate)
|
|
return dai->driver->ops->set_tristate(dai, tristate);
|
|
else
|
|
return -EINVAL;
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dai_set_tristate);
|
|
|
|
/**
|
|
* snd_soc_dai_digital_mute - configure DAI system or master clock.
|
|
* @dai: DAI
|
|
* @mute: mute enable
|
|
* @direction: stream to mute
|
|
*
|
|
* Mutes the DAI DAC.
|
|
*/
|
|
int snd_soc_dai_digital_mute(struct snd_soc_dai *dai, int mute,
|
|
int direction)
|
|
{
|
|
if (dai->driver->ops->mute_stream)
|
|
return dai->driver->ops->mute_stream(dai, mute, direction);
|
|
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
|
|
dai->driver->ops->digital_mute)
|
|
return dai->driver->ops->digital_mute(dai, mute);
|
|
else
|
|
return -ENOTSUPP;
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dai_digital_mute);
|
|
|
|
int snd_soc_dai_hw_params(struct snd_soc_dai *dai,
|
|
struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = substream->private_data;
|
|
int ret;
|
|
|
|
/* perform any topology hw_params fixups before DAI */
|
|
if (rtd->dai_link->be_hw_params_fixup) {
|
|
ret = rtd->dai_link->be_hw_params_fixup(rtd, params);
|
|
if (ret < 0) {
|
|
dev_err(rtd->dev,
|
|
"ASoC: hw_params topology fixup failed %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
if (dai->driver->ops->hw_params) {
|
|
ret = dai->driver->ops->hw_params(substream, params, dai);
|
|
if (ret < 0) {
|
|
dev_err(dai->dev, "ASoC: can't set %s hw params: %d\n",
|
|
dai->name, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void snd_soc_dai_hw_free(struct snd_soc_dai *dai,
|
|
struct snd_pcm_substream *substream)
|
|
{
|
|
if (dai->driver->ops->hw_free)
|
|
dai->driver->ops->hw_free(substream, dai);
|
|
}
|
|
|
|
int snd_soc_dai_startup(struct snd_soc_dai *dai,
|
|
struct snd_pcm_substream *substream)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (dai->driver->ops->startup)
|
|
ret = dai->driver->ops->startup(substream, dai);
|
|
|
|
return ret;
|
|
}
|
|
|
|
void snd_soc_dai_shutdown(struct snd_soc_dai *dai,
|
|
struct snd_pcm_substream *substream)
|
|
{
|
|
if (dai->driver->ops->shutdown)
|
|
dai->driver->ops->shutdown(substream, dai);
|
|
}
|
|
|
|
int snd_soc_dai_prepare(struct snd_soc_dai *dai,
|
|
struct snd_pcm_substream *substream)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (dai->driver->ops->prepare)
|
|
ret = dai->driver->ops->prepare(substream, dai);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int snd_soc_dai_trigger(struct snd_soc_dai *dai,
|
|
struct snd_pcm_substream *substream,
|
|
int cmd)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (dai->driver->ops->trigger)
|
|
ret = dai->driver->ops->trigger(substream, cmd, dai);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int snd_soc_dai_bespoke_trigger(struct snd_soc_dai *dai,
|
|
struct snd_pcm_substream *substream,
|
|
int cmd)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (dai->driver->ops->bespoke_trigger)
|
|
ret = dai->driver->ops->bespoke_trigger(substream, cmd, dai);
|
|
|
|
return ret;
|
|
}
|
|
|
|
snd_pcm_sframes_t snd_soc_dai_delay(struct snd_soc_dai *dai,
|
|
struct snd_pcm_substream *substream)
|
|
{
|
|
int delay = 0;
|
|
|
|
if (dai->driver->ops->delay)
|
|
delay = dai->driver->ops->delay(substream, dai);
|
|
|
|
return delay;
|
|
}
|
|
|
|
void snd_soc_dai_suspend(struct snd_soc_dai *dai)
|
|
{
|
|
if (dai->driver->suspend)
|
|
dai->driver->suspend(dai);
|
|
}
|
|
|
|
void snd_soc_dai_resume(struct snd_soc_dai *dai)
|
|
{
|
|
if (dai->driver->resume)
|
|
dai->driver->resume(dai);
|
|
}
|
|
|
|
int snd_soc_dai_probe(struct snd_soc_dai *dai)
|
|
{
|
|
if (dai->driver->probe)
|
|
return dai->driver->probe(dai);
|
|
return 0;
|
|
}
|
|
|
|
int snd_soc_dai_remove(struct snd_soc_dai *dai)
|
|
{
|
|
if (dai->driver->remove)
|
|
return dai->driver->remove(dai);
|
|
return 0;
|
|
}
|
|
|
|
int snd_soc_dai_compress_new(struct snd_soc_dai *dai,
|
|
struct snd_soc_pcm_runtime *rtd, int num)
|
|
{
|
|
if (dai->driver->compress_new)
|
|
return dai->driver->compress_new(rtd, num);
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
/*
|
|
* snd_soc_dai_stream_valid() - check if a DAI supports the given stream
|
|
*
|
|
* Returns true if the DAI supports the indicated stream type.
|
|
*/
|
|
bool snd_soc_dai_stream_valid(struct snd_soc_dai *dai, int dir)
|
|
{
|
|
struct snd_soc_pcm_stream *stream;
|
|
|
|
if (dir == SNDRV_PCM_STREAM_PLAYBACK)
|
|
stream = &dai->driver->playback;
|
|
else
|
|
stream = &dai->driver->capture;
|
|
|
|
/* If the codec specifies any channels at all, it supports the stream */
|
|
return stream->channels_min;
|
|
}
|