431 lines
10 KiB
C
431 lines
10 KiB
C
/*
|
|
* linux/arch/arm/mach-omap2/board-ldp.c
|
|
*
|
|
* Copyright (C) 2008 Texas Instruments Inc.
|
|
* Nishant Kamat <nskamat@ti.com>
|
|
*
|
|
* Modified from mach-omap2/board-3430sdp.c
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#include <linux/gpio.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/input.h>
|
|
#include <linux/input/matrix_keypad.h>
|
|
#include <linux/gpio_keys.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/regulator/fixed.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/i2c/twl.h>
|
|
#include <linux/io.h>
|
|
#include <linux/smsc911x.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/usb/phy.h>
|
|
#include <linux/platform_data/spi-omap2-mcspi.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include "common.h"
|
|
#include "gpmc.h"
|
|
#include "gpmc-smsc911x.h"
|
|
|
|
#include <video/omapdss.h>
|
|
#include <video/omap-panel-data.h>
|
|
|
|
#include "board-flash.h"
|
|
#include "mux.h"
|
|
#include "hsmmc.h"
|
|
#include "control.h"
|
|
#include "common-board-devices.h"
|
|
|
|
#define LDP_SMSC911X_CS 1
|
|
#define LDP_SMSC911X_GPIO 152
|
|
#define DEBUG_BASE 0x08000000
|
|
#define LDP_ETHR_START DEBUG_BASE
|
|
|
|
static uint32_t board_keymap[] = {
|
|
KEY(0, 0, KEY_1),
|
|
KEY(1, 0, KEY_2),
|
|
KEY(2, 0, KEY_3),
|
|
KEY(0, 1, KEY_4),
|
|
KEY(1, 1, KEY_5),
|
|
KEY(2, 1, KEY_6),
|
|
KEY(3, 1, KEY_F5),
|
|
KEY(0, 2, KEY_7),
|
|
KEY(1, 2, KEY_8),
|
|
KEY(2, 2, KEY_9),
|
|
KEY(3, 2, KEY_F6),
|
|
KEY(0, 3, KEY_F7),
|
|
KEY(1, 3, KEY_0),
|
|
KEY(2, 3, KEY_F8),
|
|
PERSISTENT_KEY(4, 5),
|
|
KEY(4, 4, KEY_VOLUMEUP),
|
|
KEY(5, 5, KEY_VOLUMEDOWN),
|
|
0
|
|
};
|
|
|
|
static struct matrix_keymap_data board_map_data = {
|
|
.keymap = board_keymap,
|
|
.keymap_size = ARRAY_SIZE(board_keymap),
|
|
};
|
|
|
|
static struct twl4030_keypad_data ldp_kp_twl4030_data = {
|
|
.keymap_data = &board_map_data,
|
|
.rows = 6,
|
|
.cols = 6,
|
|
.rep = 1,
|
|
};
|
|
|
|
static struct gpio_keys_button ldp_gpio_keys_buttons[] = {
|
|
[0] = {
|
|
.code = KEY_ENTER,
|
|
.gpio = 101,
|
|
.desc = "enter sw",
|
|
.active_low = 1,
|
|
.debounce_interval = 30,
|
|
},
|
|
[1] = {
|
|
.code = KEY_F1,
|
|
.gpio = 102,
|
|
.desc = "func 1",
|
|
.active_low = 1,
|
|
.debounce_interval = 30,
|
|
},
|
|
[2] = {
|
|
.code = KEY_F2,
|
|
.gpio = 103,
|
|
.desc = "func 2",
|
|
.active_low = 1,
|
|
.debounce_interval = 30,
|
|
},
|
|
[3] = {
|
|
.code = KEY_F3,
|
|
.gpio = 104,
|
|
.desc = "func 3",
|
|
.active_low = 1,
|
|
.debounce_interval = 30,
|
|
},
|
|
[4] = {
|
|
.code = KEY_F4,
|
|
.gpio = 105,
|
|
.desc = "func 4",
|
|
.active_low = 1,
|
|
.debounce_interval = 30,
|
|
},
|
|
[5] = {
|
|
.code = KEY_LEFT,
|
|
.gpio = 106,
|
|
.desc = "left sw",
|
|
.active_low = 1,
|
|
.debounce_interval = 30,
|
|
},
|
|
[6] = {
|
|
.code = KEY_RIGHT,
|
|
.gpio = 107,
|
|
.desc = "right sw",
|
|
.active_low = 1,
|
|
.debounce_interval = 30,
|
|
},
|
|
[7] = {
|
|
.code = KEY_UP,
|
|
.gpio = 108,
|
|
.desc = "up sw",
|
|
.active_low = 1,
|
|
.debounce_interval = 30,
|
|
},
|
|
[8] = {
|
|
.code = KEY_DOWN,
|
|
.gpio = 109,
|
|
.desc = "down sw",
|
|
.active_low = 1,
|
|
.debounce_interval = 30,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_platform_data ldp_gpio_keys = {
|
|
.buttons = ldp_gpio_keys_buttons,
|
|
.nbuttons = ARRAY_SIZE(ldp_gpio_keys_buttons),
|
|
.rep = 1,
|
|
};
|
|
|
|
static struct platform_device ldp_gpio_keys_device = {
|
|
.name = "gpio-keys",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &ldp_gpio_keys,
|
|
},
|
|
};
|
|
|
|
static struct omap_smsc911x_platform_data smsc911x_cfg = {
|
|
.cs = LDP_SMSC911X_CS,
|
|
.gpio_irq = LDP_SMSC911X_GPIO,
|
|
.gpio_reset = -EINVAL,
|
|
.flags = SMSC911X_USE_32BIT,
|
|
};
|
|
|
|
static inline void __init ldp_init_smsc911x(void)
|
|
{
|
|
gpmc_smsc911x_init(&smsc911x_cfg);
|
|
}
|
|
|
|
/* LCD */
|
|
|
|
#define LCD_PANEL_RESET_GPIO 55
|
|
#define LCD_PANEL_QVGA_GPIO 56
|
|
|
|
static const struct display_timing ldp_lcd_videomode = {
|
|
.pixelclock = { 0, 5400000, 0 },
|
|
|
|
.hactive = { 0, 240, 0 },
|
|
.hfront_porch = { 0, 3, 0 },
|
|
.hback_porch = { 0, 39, 0 },
|
|
.hsync_len = { 0, 3, 0 },
|
|
|
|
.vactive = { 0, 320, 0 },
|
|
.vfront_porch = { 0, 2, 0 },
|
|
.vback_porch = { 0, 7, 0 },
|
|
.vsync_len = { 0, 1, 0 },
|
|
|
|
.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
|
|
DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
|
|
};
|
|
|
|
static struct panel_dpi_platform_data ldp_lcd_pdata = {
|
|
.name = "lcd",
|
|
.source = "dpi.0",
|
|
|
|
.data_lines = 18,
|
|
|
|
.display_timing = &ldp_lcd_videomode,
|
|
|
|
.enable_gpio = -1, /* filled in code */
|
|
.backlight_gpio = -1, /* filled in code */
|
|
};
|
|
|
|
static struct platform_device ldp_lcd_device = {
|
|
.name = "panel-dpi",
|
|
.id = 0,
|
|
.dev.platform_data = &ldp_lcd_pdata,
|
|
};
|
|
|
|
static struct omap_dss_board_info ldp_dss_data = {
|
|
.default_display_name = "lcd",
|
|
};
|
|
|
|
static void __init ldp_display_init(void)
|
|
{
|
|
int r;
|
|
|
|
static struct gpio gpios[] __initdata = {
|
|
{LCD_PANEL_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "LCD RESET"},
|
|
{LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "LCD QVGA"},
|
|
};
|
|
|
|
r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
|
|
if (r) {
|
|
pr_err("Cannot request LCD GPIOs, error %d\n", r);
|
|
return;
|
|
}
|
|
|
|
omap_display_init(&ldp_dss_data);
|
|
}
|
|
|
|
static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio)
|
|
{
|
|
int res;
|
|
|
|
/* LCD enable GPIO */
|
|
ldp_lcd_pdata.enable_gpio = gpio + 7;
|
|
|
|
/* Backlight enable GPIO */
|
|
ldp_lcd_pdata.backlight_gpio = gpio + 15;
|
|
|
|
res = platform_device_register(&ldp_lcd_device);
|
|
if (res)
|
|
pr_err("Unable to register LCD: %d\n", res);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct twl4030_gpio_platform_data ldp_gpio_data = {
|
|
.setup = ldp_twl_gpio_setup,
|
|
};
|
|
|
|
static struct regulator_consumer_supply ldp_vmmc1_supply[] = {
|
|
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
|
|
};
|
|
|
|
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
|
|
static struct regulator_init_data ldp_vmmc1 = {
|
|
.constraints = {
|
|
.min_uV = 1850000,
|
|
.max_uV = 3150000,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
|
| REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(ldp_vmmc1_supply),
|
|
.consumer_supplies = ldp_vmmc1_supply,
|
|
};
|
|
|
|
/* ads7846 on SPI */
|
|
static struct regulator_consumer_supply ldp_vaux1_supplies[] = {
|
|
REGULATOR_SUPPLY("vcc", "spi1.0"),
|
|
};
|
|
|
|
/* VAUX1 */
|
|
static struct regulator_init_data ldp_vaux1 = {
|
|
.constraints = {
|
|
.min_uV = 3000000,
|
|
.max_uV = 3000000,
|
|
.apply_uV = true,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(ldp_vaux1_supplies),
|
|
.consumer_supplies = ldp_vaux1_supplies,
|
|
};
|
|
|
|
static struct regulator_consumer_supply ldp_vpll2_supplies[] = {
|
|
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
|
|
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"),
|
|
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
|
|
};
|
|
|
|
static struct regulator_init_data ldp_vpll2 = {
|
|
.constraints = {
|
|
.name = "VDVI",
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
.apply_uV = true,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(ldp_vpll2_supplies),
|
|
.consumer_supplies = ldp_vpll2_supplies,
|
|
};
|
|
|
|
static struct twl4030_platform_data ldp_twldata = {
|
|
/* platform_data for children goes here */
|
|
.vmmc1 = &ldp_vmmc1,
|
|
.vaux1 = &ldp_vaux1,
|
|
.vpll2 = &ldp_vpll2,
|
|
.gpio = &ldp_gpio_data,
|
|
.keypad = &ldp_kp_twl4030_data,
|
|
};
|
|
|
|
static int __init omap_i2c_init(void)
|
|
{
|
|
omap3_pmic_get_config(&ldp_twldata,
|
|
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, 0);
|
|
omap3_pmic_init("twl4030", &ldp_twldata);
|
|
omap_register_i2c_bus(2, 400, NULL, 0);
|
|
omap_register_i2c_bus(3, 400, NULL, 0);
|
|
return 0;
|
|
}
|
|
|
|
static struct omap2_hsmmc_info mmc[] __initdata = {
|
|
{
|
|
.mmc = 1,
|
|
.caps = MMC_CAP_4_BIT_DATA,
|
|
.gpio_cd = -EINVAL,
|
|
.gpio_wp = -EINVAL,
|
|
},
|
|
{} /* Terminator */
|
|
};
|
|
|
|
static struct platform_device *ldp_devices[] __initdata = {
|
|
&ldp_gpio_keys_device,
|
|
};
|
|
|
|
#ifdef CONFIG_OMAP_MUX
|
|
static struct omap_board_mux board_mux[] __initdata = {
|
|
{ .reg_offset = OMAP_MUX_TERMINATOR },
|
|
};
|
|
#endif
|
|
|
|
static struct mtd_partition ldp_nand_partitions[] = {
|
|
/* All the partition sizes are listed in terms of NAND block size */
|
|
{
|
|
.name = "X-Loader-NAND",
|
|
.offset = 0,
|
|
.size = 4 * (64 * 2048), /* 512KB, 0x80000 */
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
},
|
|
{
|
|
.name = "U-Boot-NAND",
|
|
.offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
|
|
.size = 10 * (64 * 2048), /* 1.25MB, 0x140000 */
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
},
|
|
{
|
|
.name = "Boot Env-NAND",
|
|
.offset = MTDPART_OFS_APPEND, /* Offset = 0x1c0000 */
|
|
.size = 2 * (64 * 2048), /* 256KB, 0x40000 */
|
|
},
|
|
{
|
|
.name = "Kernel-NAND",
|
|
.offset = MTDPART_OFS_APPEND, /* Offset = 0x0200000*/
|
|
.size = 240 * (64 * 2048), /* 30M, 0x1E00000 */
|
|
},
|
|
{
|
|
.name = "File System - NAND",
|
|
.offset = MTDPART_OFS_APPEND, /* Offset = 0x2000000 */
|
|
.size = MTDPART_SIZ_FULL, /* 96MB, 0x6000000 */
|
|
},
|
|
|
|
};
|
|
|
|
static struct regulator_consumer_supply dummy_supplies[] = {
|
|
REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
|
|
REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
|
|
};
|
|
|
|
static void __init omap_ldp_init(void)
|
|
{
|
|
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
|
|
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
|
|
ldp_init_smsc911x();
|
|
omap_i2c_init();
|
|
platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
|
|
omap_ads7846_init(1, 54, 310, NULL);
|
|
omap_serial_init();
|
|
omap_sdrc_init(NULL, NULL);
|
|
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
|
|
usb_musb_init(NULL);
|
|
board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions),
|
|
0, 0, nand_default_timings);
|
|
|
|
omap_hsmmc_init(mmc);
|
|
ldp_display_init();
|
|
}
|
|
|
|
MACHINE_START(OMAP_LDP, "OMAP LDP board")
|
|
.atag_offset = 0x100,
|
|
.reserve = omap_reserve,
|
|
.map_io = omap3_map_io,
|
|
.init_early = omap3430_init_early,
|
|
.init_irq = omap3_init_irq,
|
|
.handle_irq = omap3_intc_handle_irq,
|
|
.init_machine = omap_ldp_init,
|
|
.init_late = omap3430_init_late,
|
|
.init_time = omap3_sync32k_timer_init,
|
|
.restart = omap3xxx_restart,
|
|
MACHINE_END
|