336 lines
8.5 KiB
C
336 lines
8.5 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
// Copyright (c) 2019 Nuvoton Technology corporation.
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/device.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/uaccess.h>
|
|
|
|
struct npcm_adc {
|
|
bool int_status;
|
|
u32 adc_sample_hz;
|
|
struct device *dev;
|
|
void __iomem *regs;
|
|
struct clk *adc_clk;
|
|
wait_queue_head_t wq;
|
|
struct regulator *vref;
|
|
struct regmap *rst_regmap;
|
|
};
|
|
|
|
/* NPCM7xx reset module */
|
|
#define NPCM7XX_IPSRST1_OFFSET 0x020
|
|
#define NPCM7XX_IPSRST1_ADC_RST BIT(27)
|
|
|
|
/* ADC registers */
|
|
#define NPCM_ADCCON 0x00
|
|
#define NPCM_ADCDATA 0x04
|
|
|
|
/* ADCCON Register Bits */
|
|
#define NPCM_ADCCON_ADC_INT_EN BIT(21)
|
|
#define NPCM_ADCCON_REFSEL BIT(19)
|
|
#define NPCM_ADCCON_ADC_INT_ST BIT(18)
|
|
#define NPCM_ADCCON_ADC_EN BIT(17)
|
|
#define NPCM_ADCCON_ADC_RST BIT(16)
|
|
#define NPCM_ADCCON_ADC_CONV BIT(13)
|
|
|
|
#define NPCM_ADCCON_CH_MASK GENMASK(27, 24)
|
|
#define NPCM_ADCCON_CH(x) ((x) << 24)
|
|
#define NPCM_ADCCON_DIV_SHIFT 1
|
|
#define NPCM_ADCCON_DIV_MASK GENMASK(8, 1)
|
|
#define NPCM_ADC_DATA_MASK(x) ((x) & GENMASK(9, 0))
|
|
|
|
#define NPCM_ADC_ENABLE (NPCM_ADCCON_ADC_EN | NPCM_ADCCON_ADC_INT_EN)
|
|
|
|
/* ADC General Definition */
|
|
#define NPCM_RESOLUTION_BITS 10
|
|
#define NPCM_INT_VREF_MV 2000
|
|
|
|
#define NPCM_ADC_CHAN(ch) { \
|
|
.type = IIO_VOLTAGE, \
|
|
.indexed = 1, \
|
|
.channel = ch, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
|
|
BIT(IIO_CHAN_INFO_SAMP_FREQ), \
|
|
}
|
|
|
|
static const struct iio_chan_spec npcm_adc_iio_channels[] = {
|
|
NPCM_ADC_CHAN(0),
|
|
NPCM_ADC_CHAN(1),
|
|
NPCM_ADC_CHAN(2),
|
|
NPCM_ADC_CHAN(3),
|
|
NPCM_ADC_CHAN(4),
|
|
NPCM_ADC_CHAN(5),
|
|
NPCM_ADC_CHAN(6),
|
|
NPCM_ADC_CHAN(7),
|
|
};
|
|
|
|
static irqreturn_t npcm_adc_isr(int irq, void *data)
|
|
{
|
|
u32 regtemp;
|
|
struct iio_dev *indio_dev = data;
|
|
struct npcm_adc *info = iio_priv(indio_dev);
|
|
|
|
regtemp = ioread32(info->regs + NPCM_ADCCON);
|
|
if (regtemp & NPCM_ADCCON_ADC_INT_ST) {
|
|
iowrite32(regtemp, info->regs + NPCM_ADCCON);
|
|
wake_up_interruptible(&info->wq);
|
|
info->int_status = true;
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int npcm_adc_read(struct npcm_adc *info, int *val, u8 channel)
|
|
{
|
|
int ret;
|
|
u32 regtemp;
|
|
|
|
/* Select ADC channel */
|
|
regtemp = ioread32(info->regs + NPCM_ADCCON);
|
|
regtemp &= ~NPCM_ADCCON_CH_MASK;
|
|
info->int_status = false;
|
|
iowrite32(regtemp | NPCM_ADCCON_CH(channel) |
|
|
NPCM_ADCCON_ADC_CONV, info->regs + NPCM_ADCCON);
|
|
|
|
ret = wait_event_interruptible_timeout(info->wq, info->int_status,
|
|
msecs_to_jiffies(10));
|
|
if (ret == 0) {
|
|
regtemp = ioread32(info->regs + NPCM_ADCCON);
|
|
if ((regtemp & NPCM_ADCCON_ADC_CONV) && info->rst_regmap) {
|
|
/* if conversion failed - reset ADC module */
|
|
regmap_write(info->rst_regmap, NPCM7XX_IPSRST1_OFFSET,
|
|
NPCM7XX_IPSRST1_ADC_RST);
|
|
msleep(100);
|
|
regmap_write(info->rst_regmap, NPCM7XX_IPSRST1_OFFSET,
|
|
0x0);
|
|
msleep(100);
|
|
|
|
/* Enable ADC and start conversion module */
|
|
iowrite32(NPCM_ADC_ENABLE | NPCM_ADCCON_ADC_CONV,
|
|
info->regs + NPCM_ADCCON);
|
|
dev_err(info->dev, "RESET ADC Complete\n");
|
|
}
|
|
return -ETIMEDOUT;
|
|
}
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*val = NPCM_ADC_DATA_MASK(ioread32(info->regs + NPCM_ADCDATA));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int npcm_adc_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan, int *val,
|
|
int *val2, long mask)
|
|
{
|
|
int ret;
|
|
int vref_uv;
|
|
struct npcm_adc *info = iio_priv(indio_dev);
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
mutex_lock(&indio_dev->mlock);
|
|
ret = npcm_adc_read(info, val, chan->channel);
|
|
mutex_unlock(&indio_dev->mlock);
|
|
if (ret) {
|
|
dev_err(info->dev, "NPCM ADC read failed\n");
|
|
return ret;
|
|
}
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
if (info->vref) {
|
|
vref_uv = regulator_get_voltage(info->vref);
|
|
*val = vref_uv / 1000;
|
|
} else {
|
|
*val = NPCM_INT_VREF_MV;
|
|
}
|
|
*val2 = NPCM_RESOLUTION_BITS;
|
|
return IIO_VAL_FRACTIONAL_LOG2;
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
*val = info->adc_sample_hz;
|
|
return IIO_VAL_INT;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct iio_info npcm_adc_iio_info = {
|
|
.read_raw = &npcm_adc_read_raw,
|
|
};
|
|
|
|
static const struct of_device_id npcm_adc_match[] = {
|
|
{ .compatible = "nuvoton,npcm750-adc", },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, npcm_adc_match);
|
|
|
|
static int npcm_adc_probe(struct platform_device *pdev)
|
|
{
|
|
int ret;
|
|
int irq;
|
|
u32 div;
|
|
u32 reg_con;
|
|
struct resource *res;
|
|
struct npcm_adc *info;
|
|
struct iio_dev *indio_dev;
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *np = pdev->dev.of_node;
|
|
|
|
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
info = iio_priv(indio_dev);
|
|
|
|
info->dev = &pdev->dev;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
info->regs = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(info->regs))
|
|
return PTR_ERR(info->regs);
|
|
|
|
info->adc_clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(info->adc_clk)) {
|
|
dev_warn(&pdev->dev, "ADC clock failed: can't read clk\n");
|
|
return PTR_ERR(info->adc_clk);
|
|
}
|
|
|
|
/* calculate ADC clock sample rate */
|
|
reg_con = ioread32(info->regs + NPCM_ADCCON);
|
|
div = reg_con & NPCM_ADCCON_DIV_MASK;
|
|
div = div >> NPCM_ADCCON_DIV_SHIFT;
|
|
info->adc_sample_hz = clk_get_rate(info->adc_clk) / ((div + 1) * 2);
|
|
|
|
if (of_device_is_compatible(np, "nuvoton,npcm750-adc")) {
|
|
info->rst_regmap = syscon_regmap_lookup_by_compatible
|
|
("nuvoton,npcm750-rst");
|
|
if (IS_ERR(info->rst_regmap)) {
|
|
dev_err(&pdev->dev, "Failed to find nuvoton,npcm750-rst\n");
|
|
ret = PTR_ERR(info->rst_regmap);
|
|
goto err_disable_clk;
|
|
}
|
|
}
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq <= 0) {
|
|
dev_err(dev, "failed getting interrupt resource\n");
|
|
ret = -EINVAL;
|
|
goto err_disable_clk;
|
|
}
|
|
|
|
ret = devm_request_irq(&pdev->dev, irq, npcm_adc_isr, 0,
|
|
"NPCM_ADC", indio_dev);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed requesting interrupt\n");
|
|
goto err_disable_clk;
|
|
}
|
|
|
|
reg_con = ioread32(info->regs + NPCM_ADCCON);
|
|
info->vref = devm_regulator_get_optional(&pdev->dev, "vref");
|
|
if (!IS_ERR(info->vref)) {
|
|
ret = regulator_enable(info->vref);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Can't enable ADC reference voltage\n");
|
|
goto err_disable_clk;
|
|
}
|
|
|
|
iowrite32(reg_con & ~NPCM_ADCCON_REFSEL,
|
|
info->regs + NPCM_ADCCON);
|
|
} else {
|
|
/*
|
|
* Any error which is not ENODEV indicates the regulator
|
|
* has been specified and so is a failure case.
|
|
*/
|
|
if (PTR_ERR(info->vref) != -ENODEV) {
|
|
ret = PTR_ERR(info->vref);
|
|
goto err_disable_clk;
|
|
}
|
|
|
|
/* Use internal reference */
|
|
iowrite32(reg_con | NPCM_ADCCON_REFSEL,
|
|
info->regs + NPCM_ADCCON);
|
|
}
|
|
|
|
init_waitqueue_head(&info->wq);
|
|
|
|
reg_con = ioread32(info->regs + NPCM_ADCCON);
|
|
reg_con |= NPCM_ADC_ENABLE;
|
|
|
|
/* Enable the ADC Module */
|
|
iowrite32(reg_con, info->regs + NPCM_ADCCON);
|
|
|
|
/* Start ADC conversion */
|
|
iowrite32(reg_con | NPCM_ADCCON_ADC_CONV, info->regs + NPCM_ADCCON);
|
|
|
|
platform_set_drvdata(pdev, indio_dev);
|
|
indio_dev->name = dev_name(&pdev->dev);
|
|
indio_dev->dev.parent = &pdev->dev;
|
|
indio_dev->info = &npcm_adc_iio_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->channels = npcm_adc_iio_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(npcm_adc_iio_channels);
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Couldn't register the device.\n");
|
|
goto err_iio_register;
|
|
}
|
|
|
|
pr_info("NPCM ADC driver probed\n");
|
|
|
|
return 0;
|
|
|
|
err_iio_register:
|
|
iowrite32(reg_con & ~NPCM_ADCCON_ADC_EN, info->regs + NPCM_ADCCON);
|
|
if (!IS_ERR(info->vref))
|
|
regulator_disable(info->vref);
|
|
err_disable_clk:
|
|
clk_disable_unprepare(info->adc_clk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int npcm_adc_remove(struct platform_device *pdev)
|
|
{
|
|
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
|
|
struct npcm_adc *info = iio_priv(indio_dev);
|
|
u32 regtemp;
|
|
|
|
iio_device_unregister(indio_dev);
|
|
|
|
regtemp = ioread32(info->regs + NPCM_ADCCON);
|
|
iowrite32(regtemp & ~NPCM_ADCCON_ADC_EN, info->regs + NPCM_ADCCON);
|
|
if (!IS_ERR(info->vref))
|
|
regulator_disable(info->vref);
|
|
clk_disable_unprepare(info->adc_clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver npcm_adc_driver = {
|
|
.probe = npcm_adc_probe,
|
|
.remove = npcm_adc_remove,
|
|
.driver = {
|
|
.name = "npcm_adc",
|
|
.of_match_table = npcm_adc_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(npcm_adc_driver);
|
|
|
|
MODULE_DESCRIPTION("Nuvoton NPCM ADC Driver");
|
|
MODULE_AUTHOR("Tomer Maimon <tomer.maimon@nuvoton.com>");
|
|
MODULE_LICENSE("GPL v2");
|