358 lines
8.0 KiB
C
358 lines
8.0 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* I2C link layer for the NXP NCI driver
|
|
*
|
|
* Copyright (C) 2014 NXP Semiconductors All rights reserved.
|
|
* Copyright (C) 2012-2015 Intel Corporation. All rights reserved.
|
|
*
|
|
* Authors: Clément Perrochaud <clement.perrochaud@nxp.com>
|
|
* Authors: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
|
|
*
|
|
* Derived from PN544 device driver:
|
|
* Copyright (C) 2012 Intel Corporation. All rights reserved.
|
|
*/
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/nfc.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <asm/unaligned.h>
|
|
|
|
#include <net/nfc/nfc.h>
|
|
|
|
#include "nxp-nci.h"
|
|
|
|
#define NXP_NCI_I2C_DRIVER_NAME "nxp-nci_i2c"
|
|
|
|
#define NXP_NCI_I2C_MAX_PAYLOAD 32
|
|
|
|
struct nxp_nci_i2c_phy {
|
|
struct i2c_client *i2c_dev;
|
|
struct nci_dev *ndev;
|
|
|
|
struct gpio_desc *gpiod_en;
|
|
struct gpio_desc *gpiod_fw;
|
|
|
|
int hard_fault; /*
|
|
* < 0 if hardware error occurred (e.g. i2c err)
|
|
* and prevents normal operation.
|
|
*/
|
|
};
|
|
|
|
static int nxp_nci_i2c_set_mode(void *phy_id,
|
|
enum nxp_nci_mode mode)
|
|
{
|
|
struct nxp_nci_i2c_phy *phy = (struct nxp_nci_i2c_phy *) phy_id;
|
|
|
|
gpiod_set_value(phy->gpiod_fw, (mode == NXP_NCI_MODE_FW) ? 1 : 0);
|
|
gpiod_set_value(phy->gpiod_en, (mode != NXP_NCI_MODE_COLD) ? 1 : 0);
|
|
usleep_range(10000, 15000);
|
|
|
|
if (mode == NXP_NCI_MODE_COLD)
|
|
phy->hard_fault = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nxp_nci_i2c_write(void *phy_id, struct sk_buff *skb)
|
|
{
|
|
int r;
|
|
struct nxp_nci_i2c_phy *phy = phy_id;
|
|
struct i2c_client *client = phy->i2c_dev;
|
|
|
|
if (phy->hard_fault != 0)
|
|
return phy->hard_fault;
|
|
|
|
r = i2c_master_send(client, skb->data, skb->len);
|
|
if (r < 0) {
|
|
/* Retry, chip was in standby */
|
|
msleep(110);
|
|
r = i2c_master_send(client, skb->data, skb->len);
|
|
}
|
|
|
|
if (r < 0) {
|
|
nfc_err(&client->dev, "Error %d on I2C send\n", r);
|
|
} else if (r != skb->len) {
|
|
nfc_err(&client->dev,
|
|
"Invalid length sent: %u (expected %u)\n",
|
|
r, skb->len);
|
|
r = -EREMOTEIO;
|
|
} else {
|
|
/* Success but return 0 and not number of bytes */
|
|
r = 0;
|
|
}
|
|
|
|
return r;
|
|
}
|
|
|
|
static const struct nxp_nci_phy_ops i2c_phy_ops = {
|
|
.set_mode = nxp_nci_i2c_set_mode,
|
|
.write = nxp_nci_i2c_write,
|
|
};
|
|
|
|
static int nxp_nci_i2c_fw_read(struct nxp_nci_i2c_phy *phy,
|
|
struct sk_buff **skb)
|
|
{
|
|
struct i2c_client *client = phy->i2c_dev;
|
|
u16 header;
|
|
size_t frame_len;
|
|
int r;
|
|
|
|
r = i2c_master_recv(client, (u8 *) &header, NXP_NCI_FW_HDR_LEN);
|
|
if (r < 0) {
|
|
goto fw_read_exit;
|
|
} else if (r != NXP_NCI_FW_HDR_LEN) {
|
|
nfc_err(&client->dev, "Incorrect header length: %u\n", r);
|
|
r = -EBADMSG;
|
|
goto fw_read_exit;
|
|
}
|
|
|
|
frame_len = (be16_to_cpu(header) & NXP_NCI_FW_FRAME_LEN_MASK) +
|
|
NXP_NCI_FW_CRC_LEN;
|
|
|
|
*skb = alloc_skb(NXP_NCI_FW_HDR_LEN + frame_len, GFP_KERNEL);
|
|
if (*skb == NULL) {
|
|
r = -ENOMEM;
|
|
goto fw_read_exit;
|
|
}
|
|
|
|
skb_put_data(*skb, &header, NXP_NCI_FW_HDR_LEN);
|
|
|
|
r = i2c_master_recv(client, skb_put(*skb, frame_len), frame_len);
|
|
if (r != frame_len) {
|
|
nfc_err(&client->dev,
|
|
"Invalid frame length: %u (expected %zu)\n",
|
|
r, frame_len);
|
|
r = -EBADMSG;
|
|
goto fw_read_exit_free_skb;
|
|
}
|
|
|
|
return 0;
|
|
|
|
fw_read_exit_free_skb:
|
|
kfree_skb(*skb);
|
|
fw_read_exit:
|
|
return r;
|
|
}
|
|
|
|
static int nxp_nci_i2c_nci_read(struct nxp_nci_i2c_phy *phy,
|
|
struct sk_buff **skb)
|
|
{
|
|
struct nci_ctrl_hdr header; /* May actually be a data header */
|
|
struct i2c_client *client = phy->i2c_dev;
|
|
int r;
|
|
|
|
r = i2c_master_recv(client, (u8 *) &header, NCI_CTRL_HDR_SIZE);
|
|
if (r < 0) {
|
|
goto nci_read_exit;
|
|
} else if (r != NCI_CTRL_HDR_SIZE) {
|
|
nfc_err(&client->dev, "Incorrect header length: %u\n", r);
|
|
r = -EBADMSG;
|
|
goto nci_read_exit;
|
|
}
|
|
|
|
*skb = alloc_skb(NCI_CTRL_HDR_SIZE + header.plen, GFP_KERNEL);
|
|
if (*skb == NULL) {
|
|
r = -ENOMEM;
|
|
goto nci_read_exit;
|
|
}
|
|
|
|
skb_put_data(*skb, (void *)&header, NCI_CTRL_HDR_SIZE);
|
|
|
|
r = i2c_master_recv(client, skb_put(*skb, header.plen), header.plen);
|
|
if (r != header.plen) {
|
|
nfc_err(&client->dev,
|
|
"Invalid frame payload length: %u (expected %u)\n",
|
|
r, header.plen);
|
|
r = -EBADMSG;
|
|
goto nci_read_exit_free_skb;
|
|
}
|
|
|
|
return 0;
|
|
|
|
nci_read_exit_free_skb:
|
|
kfree_skb(*skb);
|
|
nci_read_exit:
|
|
return r;
|
|
}
|
|
|
|
static irqreturn_t nxp_nci_i2c_irq_thread_fn(int irq, void *phy_id)
|
|
{
|
|
struct nxp_nci_i2c_phy *phy = phy_id;
|
|
struct i2c_client *client;
|
|
struct nxp_nci_info *info;
|
|
|
|
struct sk_buff *skb = NULL;
|
|
int r = 0;
|
|
|
|
if (!phy || !phy->ndev)
|
|
goto exit_irq_none;
|
|
|
|
client = phy->i2c_dev;
|
|
|
|
if (!client || irq != client->irq)
|
|
goto exit_irq_none;
|
|
|
|
info = nci_get_drvdata(phy->ndev);
|
|
|
|
if (!info)
|
|
goto exit_irq_none;
|
|
|
|
mutex_lock(&info->info_lock);
|
|
|
|
if (phy->hard_fault != 0)
|
|
goto exit_irq_handled;
|
|
|
|
switch (info->mode) {
|
|
case NXP_NCI_MODE_NCI:
|
|
r = nxp_nci_i2c_nci_read(phy, &skb);
|
|
break;
|
|
case NXP_NCI_MODE_FW:
|
|
r = nxp_nci_i2c_fw_read(phy, &skb);
|
|
break;
|
|
case NXP_NCI_MODE_COLD:
|
|
r = -EREMOTEIO;
|
|
break;
|
|
}
|
|
|
|
if (r == -EREMOTEIO) {
|
|
phy->hard_fault = r;
|
|
if (info->mode == NXP_NCI_MODE_FW)
|
|
nxp_nci_fw_recv_frame(phy->ndev, NULL);
|
|
}
|
|
if (r < 0) {
|
|
nfc_err(&client->dev, "Read failed with error %d\n", r);
|
|
goto exit_irq_handled;
|
|
}
|
|
|
|
switch (info->mode) {
|
|
case NXP_NCI_MODE_NCI:
|
|
nci_recv_frame(phy->ndev, skb);
|
|
break;
|
|
case NXP_NCI_MODE_FW:
|
|
nxp_nci_fw_recv_frame(phy->ndev, skb);
|
|
break;
|
|
case NXP_NCI_MODE_COLD:
|
|
break;
|
|
}
|
|
|
|
exit_irq_handled:
|
|
mutex_unlock(&info->info_lock);
|
|
return IRQ_HANDLED;
|
|
exit_irq_none:
|
|
WARN_ON_ONCE(1);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
static const struct acpi_gpio_params firmware_gpios = { 1, 0, false };
|
|
static const struct acpi_gpio_params enable_gpios = { 2, 0, false };
|
|
|
|
static const struct acpi_gpio_mapping acpi_nxp_nci_gpios[] = {
|
|
{ "enable-gpios", &enable_gpios, 1 },
|
|
{ "firmware-gpios", &firmware_gpios, 1 },
|
|
{ }
|
|
};
|
|
|
|
static int nxp_nci_i2c_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct nxp_nci_i2c_phy *phy;
|
|
int r;
|
|
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
|
|
nfc_err(&client->dev, "Need I2C_FUNC_I2C\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
phy = devm_kzalloc(&client->dev, sizeof(struct nxp_nci_i2c_phy),
|
|
GFP_KERNEL);
|
|
if (!phy)
|
|
return -ENOMEM;
|
|
|
|
phy->i2c_dev = client;
|
|
i2c_set_clientdata(client, phy);
|
|
|
|
r = devm_acpi_dev_add_driver_gpios(dev, acpi_nxp_nci_gpios);
|
|
if (r)
|
|
return r;
|
|
|
|
phy->gpiod_en = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
|
|
if (IS_ERR(phy->gpiod_en)) {
|
|
nfc_err(dev, "Failed to get EN gpio\n");
|
|
return PTR_ERR(phy->gpiod_en);
|
|
}
|
|
|
|
phy->gpiod_fw = devm_gpiod_get(dev, "firmware", GPIOD_OUT_LOW);
|
|
if (IS_ERR(phy->gpiod_fw)) {
|
|
nfc_err(dev, "Failed to get FW gpio\n");
|
|
return PTR_ERR(phy->gpiod_fw);
|
|
}
|
|
|
|
r = nxp_nci_probe(phy, &client->dev, &i2c_phy_ops,
|
|
NXP_NCI_I2C_MAX_PAYLOAD, &phy->ndev);
|
|
if (r < 0)
|
|
return r;
|
|
|
|
r = request_threaded_irq(client->irq, NULL,
|
|
nxp_nci_i2c_irq_thread_fn,
|
|
IRQF_TRIGGER_RISING | IRQF_ONESHOT,
|
|
NXP_NCI_I2C_DRIVER_NAME, phy);
|
|
if (r < 0)
|
|
nfc_err(&client->dev, "Unable to register IRQ handler\n");
|
|
|
|
return r;
|
|
}
|
|
|
|
static int nxp_nci_i2c_remove(struct i2c_client *client)
|
|
{
|
|
struct nxp_nci_i2c_phy *phy = i2c_get_clientdata(client);
|
|
|
|
nxp_nci_remove(phy->ndev);
|
|
free_irq(client->irq, phy);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id nxp_nci_i2c_id_table[] = {
|
|
{"nxp-nci_i2c", 0},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, nxp_nci_i2c_id_table);
|
|
|
|
static const struct of_device_id of_nxp_nci_i2c_match[] = {
|
|
{ .compatible = "nxp,nxp-nci-i2c", },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, of_nxp_nci_i2c_match);
|
|
|
|
#ifdef CONFIG_ACPI
|
|
static const struct acpi_device_id acpi_id[] = {
|
|
{ "NXP1001" },
|
|
{ "NXP7471" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, acpi_id);
|
|
#endif
|
|
|
|
static struct i2c_driver nxp_nci_i2c_driver = {
|
|
.driver = {
|
|
.name = NXP_NCI_I2C_DRIVER_NAME,
|
|
.acpi_match_table = ACPI_PTR(acpi_id),
|
|
.of_match_table = of_nxp_nci_i2c_match,
|
|
},
|
|
.probe = nxp_nci_i2c_probe,
|
|
.id_table = nxp_nci_i2c_id_table,
|
|
.remove = nxp_nci_i2c_remove,
|
|
};
|
|
|
|
module_i2c_driver(nxp_nci_i2c_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("I2C driver for NXP NCI NFC controllers");
|
|
MODULE_AUTHOR("Clément Perrochaud <clement.perrochaud@nxp.com>");
|
|
MODULE_AUTHOR("Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>");
|