445 lines
12 KiB
C
445 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2003-2015 Broadcom Corporation
|
|
* All Rights Reserved
|
|
*/
|
|
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/module.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irqchip/chained_irq.h>
|
|
#include <linux/acpi.h>
|
|
|
|
/*
|
|
* XLP GPIO has multiple 32 bit registers for each feature where each register
|
|
* controls 32 pins. So, pins up to 64 require 2 32-bit registers and up to 96
|
|
* require 3 32-bit registers for each feature.
|
|
* Here we only define offset of the first register for each feature. Offset of
|
|
* the registers for pins greater than 32 can be calculated as following(Use
|
|
* GPIO_INT_STAT as example):
|
|
*
|
|
* offset = (gpio / XLP_GPIO_REGSZ) * 4;
|
|
* reg_addr = addr + offset;
|
|
*
|
|
* where addr is base address of the that feature register and gpio is the pin.
|
|
*/
|
|
#define GPIO_OUTPUT_EN 0x00
|
|
#define GPIO_PADDRV 0x08
|
|
#define GPIO_INT_EN00 0x18
|
|
#define GPIO_INT_EN10 0x20
|
|
#define GPIO_INT_EN20 0x28
|
|
#define GPIO_INT_EN30 0x30
|
|
#define GPIO_INT_POL 0x38
|
|
#define GPIO_INT_TYPE 0x40
|
|
#define GPIO_INT_STAT 0x48
|
|
|
|
#define GPIO_9XX_BYTESWAP 0X00
|
|
#define GPIO_9XX_CTRL 0X04
|
|
#define GPIO_9XX_OUTPUT_EN 0x14
|
|
#define GPIO_9XX_PADDRV 0x24
|
|
/*
|
|
* Only for 4 interrupt enable reg are defined for now,
|
|
* total reg available are 12.
|
|
*/
|
|
#define GPIO_9XX_INT_EN00 0x44
|
|
#define GPIO_9XX_INT_EN10 0x54
|
|
#define GPIO_9XX_INT_EN20 0x64
|
|
#define GPIO_9XX_INT_EN30 0x74
|
|
#define GPIO_9XX_INT_POL 0x104
|
|
#define GPIO_9XX_INT_TYPE 0x114
|
|
#define GPIO_9XX_INT_STAT 0x124
|
|
|
|
#define GPIO_3XX_INT_EN00 0x18
|
|
#define GPIO_3XX_INT_EN10 0x20
|
|
#define GPIO_3XX_INT_EN20 0x28
|
|
#define GPIO_3XX_INT_EN30 0x30
|
|
#define GPIO_3XX_INT_POL 0x78
|
|
#define GPIO_3XX_INT_TYPE 0x80
|
|
#define GPIO_3XX_INT_STAT 0x88
|
|
|
|
/* Interrupt type register mask */
|
|
#define XLP_GPIO_IRQ_TYPE_LVL 0x0
|
|
#define XLP_GPIO_IRQ_TYPE_EDGE 0x1
|
|
|
|
/* Interrupt polarity register mask */
|
|
#define XLP_GPIO_IRQ_POL_HIGH 0x0
|
|
#define XLP_GPIO_IRQ_POL_LOW 0x1
|
|
|
|
#define XLP_GPIO_REGSZ 32
|
|
#define XLP_GPIO_IRQ_BASE 768
|
|
#define XLP_MAX_NR_GPIO 96
|
|
|
|
/* XLP variants supported by this driver */
|
|
enum {
|
|
XLP_GPIO_VARIANT_XLP832 = 1,
|
|
XLP_GPIO_VARIANT_XLP316,
|
|
XLP_GPIO_VARIANT_XLP208,
|
|
XLP_GPIO_VARIANT_XLP980,
|
|
XLP_GPIO_VARIANT_XLP532,
|
|
GPIO_VARIANT_VULCAN
|
|
};
|
|
|
|
struct xlp_gpio_priv {
|
|
struct gpio_chip chip;
|
|
DECLARE_BITMAP(gpio_enabled_mask, XLP_MAX_NR_GPIO);
|
|
void __iomem *gpio_intr_en; /* pointer to first intr enable reg */
|
|
void __iomem *gpio_intr_stat; /* pointer to first intr status reg */
|
|
void __iomem *gpio_intr_type; /* pointer to first intr type reg */
|
|
void __iomem *gpio_intr_pol; /* pointer to first intr polarity reg */
|
|
void __iomem *gpio_out_en; /* pointer to first output enable reg */
|
|
void __iomem *gpio_paddrv; /* pointer to first pad drive reg */
|
|
spinlock_t lock;
|
|
};
|
|
|
|
static int xlp_gpio_get_reg(void __iomem *addr, unsigned gpio)
|
|
{
|
|
u32 pos, regset;
|
|
|
|
pos = gpio % XLP_GPIO_REGSZ;
|
|
regset = (gpio / XLP_GPIO_REGSZ) * 4;
|
|
return !!(readl(addr + regset) & BIT(pos));
|
|
}
|
|
|
|
static void xlp_gpio_set_reg(void __iomem *addr, unsigned gpio, int state)
|
|
{
|
|
u32 value, pos, regset;
|
|
|
|
pos = gpio % XLP_GPIO_REGSZ;
|
|
regset = (gpio / XLP_GPIO_REGSZ) * 4;
|
|
value = readl(addr + regset);
|
|
|
|
if (state)
|
|
value |= BIT(pos);
|
|
else
|
|
value &= ~BIT(pos);
|
|
|
|
writel(value, addr + regset);
|
|
}
|
|
|
|
static void xlp_gpio_irq_disable(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct xlp_gpio_priv *priv = gpiochip_get_data(gc);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x0);
|
|
__clear_bit(d->hwirq, priv->gpio_enabled_mask);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
}
|
|
|
|
static void xlp_gpio_irq_mask_ack(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct xlp_gpio_priv *priv = gpiochip_get_data(gc);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x0);
|
|
xlp_gpio_set_reg(priv->gpio_intr_stat, d->hwirq, 0x1);
|
|
__clear_bit(d->hwirq, priv->gpio_enabled_mask);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
}
|
|
|
|
static void xlp_gpio_irq_unmask(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct xlp_gpio_priv *priv = gpiochip_get_data(gc);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x1);
|
|
__set_bit(d->hwirq, priv->gpio_enabled_mask);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
}
|
|
|
|
static int xlp_gpio_set_irq_type(struct irq_data *d, unsigned int type)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct xlp_gpio_priv *priv = gpiochip_get_data(gc);
|
|
int pol, irq_type;
|
|
|
|
switch (type) {
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
irq_type = XLP_GPIO_IRQ_TYPE_EDGE;
|
|
pol = XLP_GPIO_IRQ_POL_HIGH;
|
|
break;
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
irq_type = XLP_GPIO_IRQ_TYPE_EDGE;
|
|
pol = XLP_GPIO_IRQ_POL_LOW;
|
|
break;
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
irq_type = XLP_GPIO_IRQ_TYPE_LVL;
|
|
pol = XLP_GPIO_IRQ_POL_HIGH;
|
|
break;
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
irq_type = XLP_GPIO_IRQ_TYPE_LVL;
|
|
pol = XLP_GPIO_IRQ_POL_LOW;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
xlp_gpio_set_reg(priv->gpio_intr_type, d->hwirq, irq_type);
|
|
xlp_gpio_set_reg(priv->gpio_intr_pol, d->hwirq, pol);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_chip xlp_gpio_irq_chip = {
|
|
.name = "XLP-GPIO",
|
|
.irq_mask_ack = xlp_gpio_irq_mask_ack,
|
|
.irq_disable = xlp_gpio_irq_disable,
|
|
.irq_set_type = xlp_gpio_set_irq_type,
|
|
.irq_unmask = xlp_gpio_irq_unmask,
|
|
.flags = IRQCHIP_ONESHOT_SAFE,
|
|
};
|
|
|
|
static void xlp_gpio_generic_handler(struct irq_desc *desc)
|
|
{
|
|
struct xlp_gpio_priv *priv = irq_desc_get_handler_data(desc);
|
|
struct irq_chip *irqchip = irq_desc_get_chip(desc);
|
|
int gpio, regoff;
|
|
u32 gpio_stat;
|
|
|
|
regoff = -1;
|
|
gpio_stat = 0;
|
|
|
|
chained_irq_enter(irqchip, desc);
|
|
for_each_set_bit(gpio, priv->gpio_enabled_mask, XLP_MAX_NR_GPIO) {
|
|
if (regoff != gpio / XLP_GPIO_REGSZ) {
|
|
regoff = gpio / XLP_GPIO_REGSZ;
|
|
gpio_stat = readl(priv->gpio_intr_stat + regoff * 4);
|
|
}
|
|
|
|
if (gpio_stat & BIT(gpio % XLP_GPIO_REGSZ))
|
|
generic_handle_irq(irq_find_mapping(
|
|
priv->chip.irq.domain, gpio));
|
|
}
|
|
chained_irq_exit(irqchip, desc);
|
|
}
|
|
|
|
static int xlp_gpio_dir_output(struct gpio_chip *gc, unsigned gpio, int state)
|
|
{
|
|
struct xlp_gpio_priv *priv = gpiochip_get_data(gc);
|
|
|
|
BUG_ON(gpio >= gc->ngpio);
|
|
xlp_gpio_set_reg(priv->gpio_out_en, gpio, 0x1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int xlp_gpio_dir_input(struct gpio_chip *gc, unsigned gpio)
|
|
{
|
|
struct xlp_gpio_priv *priv = gpiochip_get_data(gc);
|
|
|
|
BUG_ON(gpio >= gc->ngpio);
|
|
xlp_gpio_set_reg(priv->gpio_out_en, gpio, 0x0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int xlp_gpio_get(struct gpio_chip *gc, unsigned gpio)
|
|
{
|
|
struct xlp_gpio_priv *priv = gpiochip_get_data(gc);
|
|
|
|
BUG_ON(gpio >= gc->ngpio);
|
|
return xlp_gpio_get_reg(priv->gpio_paddrv, gpio);
|
|
}
|
|
|
|
static void xlp_gpio_set(struct gpio_chip *gc, unsigned gpio, int state)
|
|
{
|
|
struct xlp_gpio_priv *priv = gpiochip_get_data(gc);
|
|
|
|
BUG_ON(gpio >= gc->ngpio);
|
|
xlp_gpio_set_reg(priv->gpio_paddrv, gpio, state);
|
|
}
|
|
|
|
static const struct of_device_id xlp_gpio_of_ids[] = {
|
|
{
|
|
.compatible = "netlogic,xlp832-gpio",
|
|
.data = (void *)XLP_GPIO_VARIANT_XLP832,
|
|
},
|
|
{
|
|
.compatible = "netlogic,xlp316-gpio",
|
|
.data = (void *)XLP_GPIO_VARIANT_XLP316,
|
|
},
|
|
{
|
|
.compatible = "netlogic,xlp208-gpio",
|
|
.data = (void *)XLP_GPIO_VARIANT_XLP208,
|
|
},
|
|
{
|
|
.compatible = "netlogic,xlp980-gpio",
|
|
.data = (void *)XLP_GPIO_VARIANT_XLP980,
|
|
},
|
|
{
|
|
.compatible = "netlogic,xlp532-gpio",
|
|
.data = (void *)XLP_GPIO_VARIANT_XLP532,
|
|
},
|
|
{
|
|
.compatible = "brcm,vulcan-gpio",
|
|
.data = (void *)GPIO_VARIANT_VULCAN,
|
|
},
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, xlp_gpio_of_ids);
|
|
|
|
static int xlp_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct gpio_chip *gc;
|
|
struct gpio_irq_chip *girq;
|
|
struct xlp_gpio_priv *priv;
|
|
void __iomem *gpio_base;
|
|
int irq_base, irq, err;
|
|
int ngpio;
|
|
u32 soc_type;
|
|
|
|
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
gpio_base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(gpio_base))
|
|
return PTR_ERR(gpio_base);
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
if (pdev->dev.of_node) {
|
|
soc_type = (uintptr_t)of_device_get_match_data(&pdev->dev);
|
|
} else {
|
|
const struct acpi_device_id *acpi_id;
|
|
|
|
acpi_id = acpi_match_device(pdev->dev.driver->acpi_match_table,
|
|
&pdev->dev);
|
|
if (!acpi_id || !acpi_id->driver_data) {
|
|
dev_err(&pdev->dev, "Unable to match ACPI ID\n");
|
|
return -ENODEV;
|
|
}
|
|
soc_type = (uintptr_t) acpi_id->driver_data;
|
|
}
|
|
|
|
switch (soc_type) {
|
|
case XLP_GPIO_VARIANT_XLP832:
|
|
priv->gpio_out_en = gpio_base + GPIO_OUTPUT_EN;
|
|
priv->gpio_paddrv = gpio_base + GPIO_PADDRV;
|
|
priv->gpio_intr_stat = gpio_base + GPIO_INT_STAT;
|
|
priv->gpio_intr_type = gpio_base + GPIO_INT_TYPE;
|
|
priv->gpio_intr_pol = gpio_base + GPIO_INT_POL;
|
|
priv->gpio_intr_en = gpio_base + GPIO_INT_EN00;
|
|
ngpio = 41;
|
|
break;
|
|
case XLP_GPIO_VARIANT_XLP208:
|
|
case XLP_GPIO_VARIANT_XLP316:
|
|
priv->gpio_out_en = gpio_base + GPIO_OUTPUT_EN;
|
|
priv->gpio_paddrv = gpio_base + GPIO_PADDRV;
|
|
priv->gpio_intr_stat = gpio_base + GPIO_3XX_INT_STAT;
|
|
priv->gpio_intr_type = gpio_base + GPIO_3XX_INT_TYPE;
|
|
priv->gpio_intr_pol = gpio_base + GPIO_3XX_INT_POL;
|
|
priv->gpio_intr_en = gpio_base + GPIO_3XX_INT_EN00;
|
|
|
|
ngpio = (soc_type == XLP_GPIO_VARIANT_XLP208) ? 42 : 57;
|
|
break;
|
|
case XLP_GPIO_VARIANT_XLP980:
|
|
case XLP_GPIO_VARIANT_XLP532:
|
|
case GPIO_VARIANT_VULCAN:
|
|
priv->gpio_out_en = gpio_base + GPIO_9XX_OUTPUT_EN;
|
|
priv->gpio_paddrv = gpio_base + GPIO_9XX_PADDRV;
|
|
priv->gpio_intr_stat = gpio_base + GPIO_9XX_INT_STAT;
|
|
priv->gpio_intr_type = gpio_base + GPIO_9XX_INT_TYPE;
|
|
priv->gpio_intr_pol = gpio_base + GPIO_9XX_INT_POL;
|
|
priv->gpio_intr_en = gpio_base + GPIO_9XX_INT_EN00;
|
|
|
|
if (soc_type == XLP_GPIO_VARIANT_XLP980)
|
|
ngpio = 66;
|
|
else if (soc_type == XLP_GPIO_VARIANT_XLP532)
|
|
ngpio = 67;
|
|
else
|
|
ngpio = 70;
|
|
break;
|
|
default:
|
|
dev_err(&pdev->dev, "Unknown Processor type!\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
bitmap_zero(priv->gpio_enabled_mask, XLP_MAX_NR_GPIO);
|
|
|
|
gc = &priv->chip;
|
|
|
|
gc->owner = THIS_MODULE;
|
|
gc->label = dev_name(&pdev->dev);
|
|
gc->base = 0;
|
|
gc->parent = &pdev->dev;
|
|
gc->ngpio = ngpio;
|
|
gc->of_node = pdev->dev.of_node;
|
|
gc->direction_output = xlp_gpio_dir_output;
|
|
gc->direction_input = xlp_gpio_dir_input;
|
|
gc->set = xlp_gpio_set;
|
|
gc->get = xlp_gpio_get;
|
|
|
|
spin_lock_init(&priv->lock);
|
|
|
|
/* XLP(MIPS) has fixed range for GPIO IRQs, Vulcan(ARM64) does not */
|
|
if (soc_type != GPIO_VARIANT_VULCAN) {
|
|
irq_base = devm_irq_alloc_descs(&pdev->dev, -1,
|
|
XLP_GPIO_IRQ_BASE,
|
|
gc->ngpio, 0);
|
|
if (irq_base < 0) {
|
|
dev_err(&pdev->dev, "Failed to allocate IRQ numbers\n");
|
|
return irq_base;
|
|
}
|
|
} else {
|
|
irq_base = 0;
|
|
}
|
|
|
|
girq = &gc->irq;
|
|
girq->chip = &xlp_gpio_irq_chip;
|
|
girq->parent_handler = xlp_gpio_generic_handler;
|
|
girq->num_parents = 1;
|
|
girq->parents = devm_kcalloc(&pdev->dev, 1,
|
|
sizeof(*girq->parents),
|
|
GFP_KERNEL);
|
|
if (!girq->parents)
|
|
return -ENOMEM;
|
|
girq->parents[0] = irq;
|
|
girq->first = irq_base;
|
|
girq->default_type = IRQ_TYPE_NONE;
|
|
girq->handler = handle_level_irq;
|
|
|
|
err = gpiochip_add_data(gc, priv);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
dev_info(&pdev->dev, "registered %d GPIOs\n", gc->ngpio);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_ACPI
|
|
static const struct acpi_device_id xlp_gpio_acpi_match[] = {
|
|
{ "BRCM9006", GPIO_VARIANT_VULCAN },
|
|
{ "CAV9006", GPIO_VARIANT_VULCAN },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, xlp_gpio_acpi_match);
|
|
#endif
|
|
|
|
static struct platform_driver xlp_gpio_driver = {
|
|
.driver = {
|
|
.name = "xlp-gpio",
|
|
.of_match_table = xlp_gpio_of_ids,
|
|
.acpi_match_table = ACPI_PTR(xlp_gpio_acpi_match),
|
|
},
|
|
.probe = xlp_gpio_probe,
|
|
};
|
|
module_platform_driver(xlp_gpio_driver);
|
|
|
|
MODULE_AUTHOR("Kamlakant Patel <kamlakant.patel@broadcom.com>");
|
|
MODULE_AUTHOR("Ganesan Ramalingam <ganesanr@broadcom.com>");
|
|
MODULE_DESCRIPTION("Netlogic XLP GPIO Driver");
|
|
MODULE_LICENSE("GPL v2");
|