linux-sg2042/drivers/media/video/smiapp-pll.c

419 lines
13 KiB
C

/*
* drivers/media/video/smiapp-pll.c
*
* Generic driver for SMIA/SMIA++ compliant camera modules
*
* Copyright (C) 2011--2012 Nokia Corporation
* Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#include <linux/gcd.h>
#include <linux/lcm.h>
#include <linux/module.h>
#include "smiapp-pll.h"
/* Return an even number or one. */
static inline uint32_t clk_div_even(uint32_t a)
{
return max_t(uint32_t, 1, a & ~1);
}
/* Return an even number or one. */
static inline uint32_t clk_div_even_up(uint32_t a)
{
if (a == 1)
return 1;
return (a + 1) & ~1;
}
static inline uint32_t is_one_or_even(uint32_t a)
{
if (a == 1)
return 1;
if (a & 1)
return 0;
return 1;
}
static int bounds_check(struct device *dev, uint32_t val,
uint32_t min, uint32_t max, char *str)
{
if (val >= min && val <= max)
return 0;
dev_warn(dev, "%s out of bounds: %d (%d--%d)\n", str, val, min, max);
return -EINVAL;
}
static void print_pll(struct device *dev, struct smiapp_pll *pll)
{
dev_dbg(dev, "pre_pll_clk_div\t%d\n", pll->pre_pll_clk_div);
dev_dbg(dev, "pll_multiplier \t%d\n", pll->pll_multiplier);
if (pll->flags != SMIAPP_PLL_FLAG_NO_OP_CLOCKS) {
dev_dbg(dev, "op_sys_clk_div \t%d\n", pll->op_sys_clk_div);
dev_dbg(dev, "op_pix_clk_div \t%d\n", pll->op_pix_clk_div);
}
dev_dbg(dev, "vt_sys_clk_div \t%d\n", pll->vt_sys_clk_div);
dev_dbg(dev, "vt_pix_clk_div \t%d\n", pll->vt_pix_clk_div);
dev_dbg(dev, "ext_clk_freq_hz \t%d\n", pll->ext_clk_freq_hz);
dev_dbg(dev, "pll_ip_clk_freq_hz \t%d\n", pll->pll_ip_clk_freq_hz);
dev_dbg(dev, "pll_op_clk_freq_hz \t%d\n", pll->pll_op_clk_freq_hz);
if (pll->flags & SMIAPP_PLL_FLAG_NO_OP_CLOCKS) {
dev_dbg(dev, "op_sys_clk_freq_hz \t%d\n",
pll->op_sys_clk_freq_hz);
dev_dbg(dev, "op_pix_clk_freq_hz \t%d\n",
pll->op_pix_clk_freq_hz);
}
dev_dbg(dev, "vt_sys_clk_freq_hz \t%d\n", pll->vt_sys_clk_freq_hz);
dev_dbg(dev, "vt_pix_clk_freq_hz \t%d\n", pll->vt_pix_clk_freq_hz);
}
int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits *limits,
struct smiapp_pll *pll)
{
uint32_t sys_div;
uint32_t best_pix_div = INT_MAX >> 1;
uint32_t vt_op_binning_div;
uint32_t lane_op_clock_ratio;
uint32_t mul, div;
uint32_t more_mul_min, more_mul_max;
uint32_t more_mul_factor;
uint32_t min_vt_div, max_vt_div, vt_div;
uint32_t min_sys_div, max_sys_div;
unsigned int i;
int rval;
if (pll->flags & SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE)
lane_op_clock_ratio = pll->lanes;
else
lane_op_clock_ratio = 1;
dev_dbg(dev, "lane_op_clock_ratio: %d\n", lane_op_clock_ratio);
dev_dbg(dev, "binning: %dx%d\n", pll->binning_horizontal,
pll->binning_vertical);
/* CSI transfers 2 bits per clock per lane; thus times 2 */
pll->pll_op_clk_freq_hz = pll->link_freq * 2
* (pll->lanes / lane_op_clock_ratio);
/* Figure out limits for pre-pll divider based on extclk */
dev_dbg(dev, "min / max pre_pll_clk_div: %d / %d\n",
limits->min_pre_pll_clk_div, limits->max_pre_pll_clk_div);
limits->max_pre_pll_clk_div =
min_t(uint16_t, limits->max_pre_pll_clk_div,
clk_div_even(pll->ext_clk_freq_hz /
limits->min_pll_ip_freq_hz));
limits->min_pre_pll_clk_div =
max_t(uint16_t, limits->min_pre_pll_clk_div,
clk_div_even_up(
DIV_ROUND_UP(pll->ext_clk_freq_hz,
limits->max_pll_ip_freq_hz)));
dev_dbg(dev, "pre-pll check: min / max pre_pll_clk_div: %d / %d\n",
limits->min_pre_pll_clk_div, limits->max_pre_pll_clk_div);
i = gcd(pll->pll_op_clk_freq_hz, pll->ext_clk_freq_hz);
mul = div_u64(pll->pll_op_clk_freq_hz, i);
div = pll->ext_clk_freq_hz / i;
dev_dbg(dev, "mul %d / div %d\n", mul, div);
limits->min_pre_pll_clk_div =
max_t(uint16_t, limits->min_pre_pll_clk_div,
clk_div_even_up(
DIV_ROUND_UP(mul * pll->ext_clk_freq_hz,
limits->max_pll_op_freq_hz)));
dev_dbg(dev, "pll_op check: min / max pre_pll_clk_div: %d / %d\n",
limits->min_pre_pll_clk_div, limits->max_pre_pll_clk_div);
if (limits->min_pre_pll_clk_div > limits->max_pre_pll_clk_div) {
dev_err(dev, "unable to compute pre_pll divisor\n");
return -EINVAL;
}
pll->pre_pll_clk_div = limits->min_pre_pll_clk_div;
/*
* Get pre_pll_clk_div so that our pll_op_clk_freq_hz won't be
* too high.
*/
dev_dbg(dev, "pre_pll_clk_div %d\n", pll->pre_pll_clk_div);
/* Don't go above max pll multiplier. */
more_mul_max = limits->max_pll_multiplier / mul;
dev_dbg(dev, "more_mul_max: max_pll_multiplier check: %d\n",
more_mul_max);
/* Don't go above max pll op frequency. */
more_mul_max =
min_t(int,
more_mul_max,
limits->max_pll_op_freq_hz
/ (pll->ext_clk_freq_hz / pll->pre_pll_clk_div * mul));
dev_dbg(dev, "more_mul_max: max_pll_op_freq_hz check: %d\n",
more_mul_max);
/* Don't go above the division capability of op sys clock divider. */
more_mul_max = min(more_mul_max,
limits->max_op_sys_clk_div * pll->pre_pll_clk_div
/ div);
dev_dbg(dev, "more_mul_max: max_op_sys_clk_div check: %d\n",
more_mul_max);
/* Ensure we won't go above min_pll_multiplier. */
more_mul_max = min(more_mul_max,
DIV_ROUND_UP(limits->max_pll_multiplier, mul));
dev_dbg(dev, "more_mul_max: min_pll_multiplier check: %d\n",
more_mul_max);
/* Ensure we won't go below min_pll_op_freq_hz. */
more_mul_min = DIV_ROUND_UP(limits->min_pll_op_freq_hz,
pll->ext_clk_freq_hz / pll->pre_pll_clk_div
* mul);
dev_dbg(dev, "more_mul_min: min_pll_op_freq_hz check: %d\n",
more_mul_min);
/* Ensure we won't go below min_pll_multiplier. */
more_mul_min = max(more_mul_min,
DIV_ROUND_UP(limits->min_pll_multiplier, mul));
dev_dbg(dev, "more_mul_min: min_pll_multiplier check: %d\n",
more_mul_min);
if (more_mul_min > more_mul_max) {
dev_warn(dev,
"unable to compute more_mul_min and more_mul_max");
return -EINVAL;
}
more_mul_factor = lcm(div, pll->pre_pll_clk_div) / div;
dev_dbg(dev, "more_mul_factor: %d\n", more_mul_factor);
more_mul_factor = lcm(more_mul_factor, limits->min_op_sys_clk_div);
dev_dbg(dev, "more_mul_factor: min_op_sys_clk_div: %d\n",
more_mul_factor);
i = roundup(more_mul_min, more_mul_factor);
if (!is_one_or_even(i))
i <<= 1;
dev_dbg(dev, "final more_mul: %d\n", i);
if (i > more_mul_max) {
dev_warn(dev, "final more_mul is bad, max %d", more_mul_max);
return -EINVAL;
}
pll->pll_multiplier = mul * i;
pll->op_sys_clk_div = div * i / pll->pre_pll_clk_div;
dev_dbg(dev, "op_sys_clk_div: %d\n", pll->op_sys_clk_div);
pll->pll_ip_clk_freq_hz = pll->ext_clk_freq_hz
/ pll->pre_pll_clk_div;
pll->pll_op_clk_freq_hz = pll->pll_ip_clk_freq_hz
* pll->pll_multiplier;
/* Derive pll_op_clk_freq_hz. */
pll->op_sys_clk_freq_hz =
pll->pll_op_clk_freq_hz / pll->op_sys_clk_div;
pll->op_pix_clk_div = pll->bits_per_pixel;
dev_dbg(dev, "op_pix_clk_div: %d\n", pll->op_pix_clk_div);
pll->op_pix_clk_freq_hz =
pll->op_sys_clk_freq_hz / pll->op_pix_clk_div;
/*
* Some sensors perform analogue binning and some do this
* digitally. The ones doing this digitally can be roughly be
* found out using this formula. The ones doing this digitally
* should run at higher clock rate, so smaller divisor is used
* on video timing side.
*/
if (limits->min_line_length_pck_bin > limits->min_line_length_pck
/ pll->binning_horizontal)
vt_op_binning_div = pll->binning_horizontal;
else
vt_op_binning_div = 1;
dev_dbg(dev, "vt_op_binning_div: %d\n", vt_op_binning_div);
/*
* Profile 2 supports vt_pix_clk_div E [4, 10]
*
* Horizontal binning can be used as a base for difference in
* divisors. One must make sure that horizontal blanking is
* enough to accommodate the CSI-2 sync codes.
*
* Take scaling factor into account as well.
*
* Find absolute limits for the factor of vt divider.
*/
dev_dbg(dev, "scale_m: %d\n", pll->scale_m);
min_vt_div = DIV_ROUND_UP(pll->op_pix_clk_div * pll->op_sys_clk_div
* pll->scale_n,
lane_op_clock_ratio * vt_op_binning_div
* pll->scale_m);
/* Find smallest and biggest allowed vt divisor. */
dev_dbg(dev, "min_vt_div: %d\n", min_vt_div);
min_vt_div = max(min_vt_div,
DIV_ROUND_UP(pll->pll_op_clk_freq_hz,
limits->max_vt_pix_clk_freq_hz));
dev_dbg(dev, "min_vt_div: max_vt_pix_clk_freq_hz: %d\n",
min_vt_div);
min_vt_div = max_t(uint32_t, min_vt_div,
limits->min_vt_pix_clk_div
* limits->min_vt_sys_clk_div);
dev_dbg(dev, "min_vt_div: min_vt_clk_div: %d\n", min_vt_div);
max_vt_div = limits->max_vt_sys_clk_div * limits->max_vt_pix_clk_div;
dev_dbg(dev, "max_vt_div: %d\n", max_vt_div);
max_vt_div = min(max_vt_div,
DIV_ROUND_UP(pll->pll_op_clk_freq_hz,
limits->min_vt_pix_clk_freq_hz));
dev_dbg(dev, "max_vt_div: min_vt_pix_clk_freq_hz: %d\n",
max_vt_div);
/*
* Find limitsits for sys_clk_div. Not all values are possible
* with all values of pix_clk_div.
*/
min_sys_div = limits->min_vt_sys_clk_div;
dev_dbg(dev, "min_sys_div: %d\n", min_sys_div);
min_sys_div = max(min_sys_div,
DIV_ROUND_UP(min_vt_div,
limits->max_vt_pix_clk_div));
dev_dbg(dev, "min_sys_div: max_vt_pix_clk_div: %d\n", min_sys_div);
min_sys_div = max(min_sys_div,
pll->pll_op_clk_freq_hz
/ limits->max_vt_sys_clk_freq_hz);
dev_dbg(dev, "min_sys_div: max_pll_op_clk_freq_hz: %d\n", min_sys_div);
min_sys_div = clk_div_even_up(min_sys_div);
dev_dbg(dev, "min_sys_div: one or even: %d\n", min_sys_div);
max_sys_div = limits->max_vt_sys_clk_div;
dev_dbg(dev, "max_sys_div: %d\n", max_sys_div);
max_sys_div = min(max_sys_div,
DIV_ROUND_UP(max_vt_div,
limits->min_vt_pix_clk_div));
dev_dbg(dev, "max_sys_div: min_vt_pix_clk_div: %d\n", max_sys_div);
max_sys_div = min(max_sys_div,
DIV_ROUND_UP(pll->pll_op_clk_freq_hz,
limits->min_vt_pix_clk_freq_hz));
dev_dbg(dev, "max_sys_div: min_vt_pix_clk_freq_hz: %d\n", max_sys_div);
/*
* Find pix_div such that a legal pix_div * sys_div results
* into a value which is not smaller than div, the desired
* divisor.
*/
for (vt_div = min_vt_div; vt_div <= max_vt_div;
vt_div += 2 - (vt_div & 1)) {
for (sys_div = min_sys_div;
sys_div <= max_sys_div;
sys_div += 2 - (sys_div & 1)) {
int pix_div = DIV_ROUND_UP(vt_div, sys_div);
if (pix_div < limits->min_vt_pix_clk_div
|| pix_div > limits->max_vt_pix_clk_div) {
dev_dbg(dev,
"pix_div %d too small or too big (%d--%d)\n",
pix_div,
limits->min_vt_pix_clk_div,
limits->max_vt_pix_clk_div);
continue;
}
/* Check if this one is better. */
if (pix_div * sys_div
<= roundup(min_vt_div, best_pix_div))
best_pix_div = pix_div;
}
if (best_pix_div < INT_MAX >> 1)
break;
}
pll->vt_sys_clk_div = DIV_ROUND_UP(min_vt_div, best_pix_div);
pll->vt_pix_clk_div = best_pix_div;
pll->vt_sys_clk_freq_hz =
pll->pll_op_clk_freq_hz / pll->vt_sys_clk_div;
pll->vt_pix_clk_freq_hz =
pll->vt_sys_clk_freq_hz / pll->vt_pix_clk_div;
pll->pixel_rate_csi =
pll->op_pix_clk_freq_hz * lane_op_clock_ratio;
print_pll(dev, pll);
rval = bounds_check(dev, pll->pre_pll_clk_div,
limits->min_pre_pll_clk_div,
limits->max_pre_pll_clk_div, "pre_pll_clk_div");
if (!rval)
rval = bounds_check(
dev, pll->pll_ip_clk_freq_hz,
limits->min_pll_ip_freq_hz, limits->max_pll_ip_freq_hz,
"pll_ip_clk_freq_hz");
if (!rval)
rval = bounds_check(
dev, pll->pll_multiplier,
limits->min_pll_multiplier, limits->max_pll_multiplier,
"pll_multiplier");
if (!rval)
rval = bounds_check(
dev, pll->pll_op_clk_freq_hz,
limits->min_pll_op_freq_hz, limits->max_pll_op_freq_hz,
"pll_op_clk_freq_hz");
if (!rval)
rval = bounds_check(
dev, pll->op_sys_clk_div,
limits->min_op_sys_clk_div, limits->max_op_sys_clk_div,
"op_sys_clk_div");
if (!rval)
rval = bounds_check(
dev, pll->op_pix_clk_div,
limits->min_op_pix_clk_div, limits->max_op_pix_clk_div,
"op_pix_clk_div");
if (!rval)
rval = bounds_check(
dev, pll->op_sys_clk_freq_hz,
limits->min_op_sys_clk_freq_hz,
limits->max_op_sys_clk_freq_hz,
"op_sys_clk_freq_hz");
if (!rval)
rval = bounds_check(
dev, pll->op_pix_clk_freq_hz,
limits->min_op_pix_clk_freq_hz,
limits->max_op_pix_clk_freq_hz,
"op_pix_clk_freq_hz");
if (!rval)
rval = bounds_check(
dev, pll->vt_sys_clk_freq_hz,
limits->min_vt_sys_clk_freq_hz,
limits->max_vt_sys_clk_freq_hz,
"vt_sys_clk_freq_hz");
if (!rval)
rval = bounds_check(
dev, pll->vt_pix_clk_freq_hz,
limits->min_vt_pix_clk_freq_hz,
limits->max_vt_pix_clk_freq_hz,
"vt_pix_clk_freq_hz");
return rval;
}
EXPORT_SYMBOL_GPL(smiapp_pll_calculate);
MODULE_AUTHOR("Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>");
MODULE_DESCRIPTION("Generic SMIA/SMIA++ PLL calculator");
MODULE_LICENSE("GPL");