258 lines
6.1 KiB
C
258 lines
6.1 KiB
C
/*
|
|
* Copyright (C) 2012 Samsung Electronics.
|
|
* Kyungmin Park <kyungmin.park@samsung.com>
|
|
* Tomasz Figa <t.figa@samsung.com>
|
|
*
|
|
* This program is free software,you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/io.h>
|
|
#include <linux/init.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
|
|
#include <asm/cacheflush.h>
|
|
#include <asm/cputype.h>
|
|
#include <asm/firmware.h>
|
|
#include <asm/hardware/cache-l2x0.h>
|
|
#include <asm/suspend.h>
|
|
|
|
#include <mach/map.h>
|
|
|
|
#include "common.h"
|
|
#include "smc.h"
|
|
|
|
#define EXYNOS_SLEEP_MAGIC 0x00000bad
|
|
#define EXYNOS_AFTR_MAGIC 0xfcba0d10
|
|
#define EXYNOS_BOOT_ADDR 0x8
|
|
#define EXYNOS_BOOT_FLAG 0xc
|
|
|
|
static void exynos_save_cp15(void)
|
|
{
|
|
/* Save Power control and Diagnostic registers */
|
|
asm ("mrc p15, 0, %0, c15, c0, 0\n"
|
|
"mrc p15, 0, %1, c15, c0, 1\n"
|
|
: "=r" (cp15_save_power), "=r" (cp15_save_diag)
|
|
: : "cc");
|
|
}
|
|
|
|
static int exynos_do_idle(unsigned long mode)
|
|
{
|
|
switch (mode) {
|
|
case FW_DO_IDLE_AFTR:
|
|
if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
|
|
exynos_save_cp15();
|
|
__raw_writel(virt_to_phys(exynos_cpu_resume_ns),
|
|
sysram_ns_base_addr + 0x24);
|
|
__raw_writel(EXYNOS_AFTR_MAGIC, sysram_ns_base_addr + 0x20);
|
|
if (soc_is_exynos3250()) {
|
|
flush_cache_all();
|
|
exynos_smc(SMC_CMD_SAVE, OP_TYPE_CORE,
|
|
SMC_POWERSTATE_IDLE, 0);
|
|
exynos_smc(SMC_CMD_SHUTDOWN, OP_TYPE_CLUSTER,
|
|
SMC_POWERSTATE_IDLE, 0);
|
|
} else
|
|
exynos_smc(SMC_CMD_CPU0AFTR, 0, 0, 0);
|
|
break;
|
|
case FW_DO_IDLE_SLEEP:
|
|
exynos_smc(SMC_CMD_SLEEP, 0, 0, 0);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int exynos_cpu_boot(int cpu)
|
|
{
|
|
/*
|
|
* Exynos3250 doesn't need to send smc command for secondary CPU boot
|
|
* because Exynos3250 removes WFE in secure mode.
|
|
*/
|
|
if (soc_is_exynos3250())
|
|
return 0;
|
|
|
|
/*
|
|
* The second parameter of SMC_CMD_CPU1BOOT command means CPU id.
|
|
* But, Exynos4212 has only one secondary CPU so second parameter
|
|
* isn't used for informing secure firmware about CPU id.
|
|
*/
|
|
if (soc_is_exynos4212())
|
|
cpu = 0;
|
|
|
|
exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0);
|
|
return 0;
|
|
}
|
|
|
|
static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr)
|
|
{
|
|
void __iomem *boot_reg;
|
|
|
|
if (!sysram_ns_base_addr)
|
|
return -ENODEV;
|
|
|
|
boot_reg = sysram_ns_base_addr + 0x1c;
|
|
|
|
/*
|
|
* Almost all Exynos-series of SoCs that run in secure mode don't need
|
|
* additional offset for every CPU, with Exynos4412 being the only
|
|
* exception.
|
|
*/
|
|
if (soc_is_exynos4412())
|
|
boot_reg += 4 * cpu;
|
|
|
|
__raw_writel(boot_addr, boot_reg);
|
|
return 0;
|
|
}
|
|
|
|
static int exynos_get_cpu_boot_addr(int cpu, unsigned long *boot_addr)
|
|
{
|
|
void __iomem *boot_reg;
|
|
|
|
if (!sysram_ns_base_addr)
|
|
return -ENODEV;
|
|
|
|
boot_reg = sysram_ns_base_addr + 0x1c;
|
|
|
|
if (soc_is_exynos4412())
|
|
boot_reg += 4 * cpu;
|
|
|
|
*boot_addr = __raw_readl(boot_reg);
|
|
return 0;
|
|
}
|
|
|
|
static int exynos_cpu_suspend(unsigned long arg)
|
|
{
|
|
flush_cache_all();
|
|
outer_flush_all();
|
|
|
|
exynos_smc(SMC_CMD_SLEEP, 0, 0, 0);
|
|
|
|
pr_info("Failed to suspend the system\n");
|
|
writel(0, sysram_ns_base_addr + EXYNOS_BOOT_FLAG);
|
|
return 1;
|
|
}
|
|
|
|
static int exynos_suspend(void)
|
|
{
|
|
if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
|
|
exynos_save_cp15();
|
|
|
|
writel(EXYNOS_SLEEP_MAGIC, sysram_ns_base_addr + EXYNOS_BOOT_FLAG);
|
|
writel(virt_to_phys(exynos_cpu_resume_ns),
|
|
sysram_ns_base_addr + EXYNOS_BOOT_ADDR);
|
|
|
|
return cpu_suspend(0, exynos_cpu_suspend);
|
|
}
|
|
|
|
static int exynos_resume(void)
|
|
{
|
|
writel(0, sysram_ns_base_addr + EXYNOS_BOOT_FLAG);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct firmware_ops exynos_firmware_ops = {
|
|
.do_idle = IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ? exynos_do_idle : NULL,
|
|
.set_cpu_boot_addr = exynos_set_cpu_boot_addr,
|
|
.get_cpu_boot_addr = exynos_get_cpu_boot_addr,
|
|
.cpu_boot = exynos_cpu_boot,
|
|
.suspend = IS_ENABLED(CONFIG_PM_SLEEP) ? exynos_suspend : NULL,
|
|
.resume = IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ? exynos_resume : NULL,
|
|
};
|
|
|
|
static void exynos_l2_write_sec(unsigned long val, unsigned reg)
|
|
{
|
|
static int l2cache_enabled;
|
|
|
|
switch (reg) {
|
|
case L2X0_CTRL:
|
|
if (val & L2X0_CTRL_EN) {
|
|
/*
|
|
* Before the cache can be enabled, due to firmware
|
|
* design, SMC_CMD_L2X0INVALL must be called.
|
|
*/
|
|
if (!l2cache_enabled) {
|
|
exynos_smc(SMC_CMD_L2X0INVALL, 0, 0, 0);
|
|
l2cache_enabled = 1;
|
|
}
|
|
} else {
|
|
l2cache_enabled = 0;
|
|
}
|
|
exynos_smc(SMC_CMD_L2X0CTRL, val, 0, 0);
|
|
break;
|
|
|
|
case L2X0_DEBUG_CTRL:
|
|
exynos_smc(SMC_CMD_L2X0DEBUG, val, 0, 0);
|
|
break;
|
|
|
|
default:
|
|
WARN_ONCE(1, "%s: ignoring write to reg 0x%x\n", __func__, reg);
|
|
}
|
|
}
|
|
|
|
static void exynos_l2_configure(const struct l2x0_regs *regs)
|
|
{
|
|
exynos_smc(SMC_CMD_L2X0SETUP1, regs->tag_latency, regs->data_latency,
|
|
regs->prefetch_ctrl);
|
|
exynos_smc(SMC_CMD_L2X0SETUP2, regs->pwr_ctrl, regs->aux_ctrl, 0);
|
|
}
|
|
|
|
void __init exynos_firmware_init(void)
|
|
{
|
|
struct device_node *nd;
|
|
const __be32 *addr;
|
|
|
|
nd = of_find_compatible_node(NULL, NULL,
|
|
"samsung,secure-firmware");
|
|
if (!nd)
|
|
return;
|
|
|
|
addr = of_get_address(nd, 0, NULL, NULL);
|
|
if (!addr) {
|
|
pr_err("%s: No address specified.\n", __func__);
|
|
return;
|
|
}
|
|
|
|
pr_info("Running under secure firmware.\n");
|
|
|
|
register_firmware_ops(&exynos_firmware_ops);
|
|
|
|
/*
|
|
* Exynos 4 SoCs (based on Cortex A9 and equipped with L2C-310),
|
|
* running under secure firmware, require certain registers of L2
|
|
* cache controller to be written in secure mode. Here .write_sec
|
|
* callback is provided to perform necessary SMC calls.
|
|
*/
|
|
if (IS_ENABLED(CONFIG_CACHE_L2X0) &&
|
|
read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
|
|
outer_cache.write_sec = exynos_l2_write_sec;
|
|
outer_cache.configure = exynos_l2_configure;
|
|
}
|
|
}
|
|
|
|
#define REG_CPU_STATE_ADDR (sysram_ns_base_addr + 0x28)
|
|
#define BOOT_MODE_MASK 0x1f
|
|
|
|
void exynos_set_boot_flag(unsigned int cpu, unsigned int mode)
|
|
{
|
|
unsigned int tmp;
|
|
|
|
tmp = __raw_readl(REG_CPU_STATE_ADDR + cpu * 4);
|
|
|
|
if (mode & BOOT_MODE_MASK)
|
|
tmp &= ~BOOT_MODE_MASK;
|
|
|
|
tmp |= mode;
|
|
__raw_writel(tmp, REG_CPU_STATE_ADDR + cpu * 4);
|
|
}
|
|
|
|
void exynos_clear_boot_flag(unsigned int cpu, unsigned int mode)
|
|
{
|
|
unsigned int tmp;
|
|
|
|
tmp = __raw_readl(REG_CPU_STATE_ADDR + cpu * 4);
|
|
tmp &= ~mode;
|
|
__raw_writel(tmp, REG_CPU_STATE_ADDR + cpu * 4);
|
|
}
|