linux-sg2042/tools
Greg Kroah-Hartman 74eb9c06b1 Second set of new device support, cleanups and features for IIO in the 5.4 cycle
Revised pull request to fix up a missing Signed-off-by and roll in
 a fix in the lsm9ds1 support after I broke it when applying.
 Revised again because the fix changed a hash meaning a fix
 that previously followed it now had the wrong fixes tag.
 
 A few fixes in here that could have gone a faster path but aren't quite
 worth the rush for 5.3.
 
 New device support
 * ad7606
   - Support the ad7606b which adds a software controlled mode alongside
     the pin controlled only approach of the ad7606. Including dt-bindings.
 * lsm6dsx
   - Add support for the gyro and accelerometer part of the lsm9ds1 which is
     a compound device also including a magnetometer (st_sensors driver).
     Includes bindings and precursor rework of the driver.
 
 Features
 * ad7192
   - Add support for low pass filter control.
   - DT binding docs.
 
 Cleanups and minor fixes
 * MAINTAINERS
   - Fix a typo in a path.
   - Add entry for ad7606
 * ad5380
   - Fix a failure to dereference a pointer before atempting to assign the
     value.
 * ad7192
   - Drop platform data as not used in mainline and we now have full DT bindings.
 * ad7606
   - YAML conversion for dt-bindings.
 * adis16240
   - Rework write_raw to make it more readable using GENMASK.
 * adis16460
   - Fix and issue with an unsigned variable holding potential negatives.
 * cros_ec
   - Fix missing default of calibration vector so that we get 'something'
     before calibration is complete on a given axis.
 * hid-sensors
   - Use int_pow instead of opencoding.
 * isl29501
   - rename dt-binding docs to include renesas inline with other renesas parts
     and general current convention.
 * kxcjk1013
   - Improve comments on the 'unusual' ACPI ids used to identify which sensor
     is which in certain laptops.
 * lsm6dsx
   - Add one bit to the fifo status masks for a number of parts.
   - Drop a reserved entry from the sensitivity values to tidy up interface.
   - Use core conversion macro from G to m/s^2 for lsm9ds1 to make it easier
     to relate to the datasheet and consistent with other parts supported.
 * max1027
   - Use device managed APIs to avoid manual error handling and cleanup.
 * rfd77402
   - Typo in Kconfig help.
 * sc27xx
   - Switch to polling mode from interrupts as interrupt handling typically
     to slow for very short sleeps.
 * st-sensors
   - Fix some missing selects for regmap.
 * tools
   - Add a .gitignore containing the binary outputs.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl1uyTgRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0Foideg//fknN/aM40zRZlClkWx9XqUsByS/3XUAl
 dZL//5DGh566D8/auBeacQxt6SzOFRpj2XwWI/K8mGJi39y9LFOywOn4dDgOBh3x
 VWe/1eCNFg9Y1eMCXncYHBtxxobuV3UKEjVtYFtzg210HP/KM6C3fWdPTpmj1zNZ
 PYSnKGiBGxeJHMCUjN0QweifIRvTy0MLkxPc9CUHcFq0XiMD2enI4TwHYuZ/CNQw
 oisDPPksbPTW5R547vLEnQe/p16MtoFMX57yehbzKIp6qYBEVR+D5ne5kxct8x80
 Ma7YVWLyWTxYF/MwLi3felIniEeyYhgTFVhy2rhZGt6eKDmNFTwTrJG5iTweeHQm
 3FJPbZ04lDjE3RhoETGDc2aSqY5/Xy1nnOJcMjZ1twbDxPGmN2/rCP3YxYRmGL/P
 VCsCZYeQF6cKi7FyFiViqALTPH0k/Ebklol1f/IG8CuFCs8r/m6kKMeSJX3+miHZ
 gIxA2lX5uj8FIiB1bZxORN76W5PzxLji5IiCPy1KtlBin3E3oWM3nQLXNHpzp2Fw
 5A8IyHb/qDoKnO1MlTkprIxdIzKqV4gtWqkY1kTBYyNyreMP/dsiw/lC1rnzWMm/
 v7JHuTbO/Ay5gvT58goK7FD77CyvRTvy3bmi7PNkWJyogWpnRTLiPusMDz7FwxK4
 Ffrbi7+qijk=
 =rPVR
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-5.4b-take3' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of new device support, cleanups and features for IIO in the 5.4 cycle

Revised pull request to fix up a missing Signed-off-by and roll in
a fix in the lsm9ds1 support after I broke it when applying.
Revised again because the fix changed a hash meaning a fix
that previously followed it now had the wrong fixes tag.

A few fixes in here that could have gone a faster path but aren't quite
worth the rush for 5.3.

New device support
* ad7606
  - Support the ad7606b which adds a software controlled mode alongside
    the pin controlled only approach of the ad7606. Including dt-bindings.
* lsm6dsx
  - Add support for the gyro and accelerometer part of the lsm9ds1 which is
    a compound device also including a magnetometer (st_sensors driver).
    Includes bindings and precursor rework of the driver.

Features
* ad7192
  - Add support for low pass filter control.
  - DT binding docs.

Cleanups and minor fixes
* MAINTAINERS
  - Fix a typo in a path.
  - Add entry for ad7606
* ad5380
  - Fix a failure to dereference a pointer before atempting to assign the
    value.
* ad7192
  - Drop platform data as not used in mainline and we now have full DT bindings.
* ad7606
  - YAML conversion for dt-bindings.
* adis16240
  - Rework write_raw to make it more readable using GENMASK.
* adis16460
  - Fix and issue with an unsigned variable holding potential negatives.
* cros_ec
  - Fix missing default of calibration vector so that we get 'something'
    before calibration is complete on a given axis.
* hid-sensors
  - Use int_pow instead of opencoding.
* isl29501
  - rename dt-binding docs to include renesas inline with other renesas parts
    and general current convention.
* kxcjk1013
  - Improve comments on the 'unusual' ACPI ids used to identify which sensor
    is which in certain laptops.
* lsm6dsx
  - Add one bit to the fifo status masks for a number of parts.
  - Drop a reserved entry from the sensitivity values to tidy up interface.
  - Use core conversion macro from G to m/s^2 for lsm9ds1 to make it easier
    to relate to the datasheet and consistent with other parts supported.
* max1027
  - Use device managed APIs to avoid manual error handling and cleanup.
* rfd77402
  - Typo in Kconfig help.
* sc27xx
  - Switch to polling mode from interrupts as interrupt handling typically
    to slow for very short sleeps.
* st-sensors
  - Fix some missing selects for regmap.
* tools
  - Add a .gitignore containing the binary outputs.

* tag 'iio-for-5.4b-take3' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (27 commits)
  iio: imu: st_lsm6dsx: rely on IIO_G_TO_M_S_2 for gain definition for LSM9DS1
  iio: imu: st_lsm6dsx: remove invalid gain value for LSM9DS1
  iio: cros_ec: set calibscale for 3d MEMS to unit vector
  iio: dac: ad5380: fix incorrect assignment to val
  iio: imu: st_lsm6dsx: Fix FIFO diff mask for tagged fifo
  dt-bindings: iio: imu: st_lsm6dsx: add lsm9ds1 device bindings
  iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9ds1
  iio: imu: st_lsm6dsx: move register definitions to sensor_settings struct
  iio: imu: st_lsm6dsx: introduce update_fifo function pointer
  dt-bindings: iio: light: isl29501: Rename bindings documentation file
  Kconfig: Fix the reference to the RFD77402 ToF sensor in the 'help' section
  iio: st_sensors: Fix build error
  dt-bindings: iio: adc: Add AD7606B ADC documentation
  dt-bindings: iio: adc: Migrate AD7606 documentation to yaml
  MAINTAINERS: Add Beniamin Bia for AD7606 driver
  iio: adc: ad7606: Add support for AD7606B ADC
  tools: iio: add .gitignore
  iio: adc: sc27xx: Change to polling mode to read data
  iio: hid-sensor-attributes: Convert to use int_pow()
  iio: adc: max1027: Use device-managed APIs
  ...
2019-09-03 22:27:46 +02:00
..
accounting
arch tools headers UAPI: Update tools's copy of mman.h headers 2019-07-29 09:02:58 -03:00
bpf tools: bpftool: add raw_tracepoint_writable prog type to header 2019-07-12 15:14:42 +02:00
build tools build: Check if gettid() is available before providing helper 2019-07-07 17:53:09 -03:00
cgroup
crypto
debugging tools: add a kernel-chktaint to tools/debugging 2019-01-08 16:29:52 -07:00
firewire treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156 2019-05-30 11:26:35 -07:00
firmware Driver Core and debugfs changes for 5.3-rc1 2019-07-12 12:24:03 -07:00
gpio Bulk GPIO changes for the v5.3 kernel cycle: 2019-07-09 09:07:00 -07:00
hv tools: hv: fix typos in toolchain 2019-08-17 15:29:28 -04:00
iio tools: iio: add .gitignore 2019-08-18 20:45:57 +01:00
include KVM/arm fixes for 5.3 2019-08-09 16:53:39 +02:00
io_uring tools/io_uring: sync with liburing 2019-05-23 10:25:26 -06:00
kvm/kvm_stat treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499 2019-06-19 17:09:53 +02:00
laptop treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505 2019-06-19 17:11:22 +02:00
leds
lib Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2019-08-06 17:11:59 -07:00
memory-model tools/memory-model: Improve data-race detection 2019-06-24 09:08:54 -07:00
nfsd
objtool objtool: Improve UACCESS coverage 2019-07-25 08:36:39 +02:00
pci pci-v5.3-changes 2019-07-15 20:44:49 -07:00
pcmcia treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 247 2019-06-19 17:09:08 +02:00
perf perf pmu-events: Fix missing "cpu_clk_unhalted.core" event 2019-08-08 15:41:37 -03:00
power kbuild: create *.mod with full directory path and remove MODVERDIR 2019-07-18 02:19:31 +09:00
scripts perf build: Do not use -Wshadow on gcc < 4.8 2019-07-23 09:04:54 -03:00
spi treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 178 2019-05-30 11:29:19 -07:00
testing Bugfixes (arm and x86) and cleanups. 2019-08-09 15:46:29 -07:00
thermal/tmon treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 89 2019-05-24 17:37:52 +02:00
time treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282 2019-06-05 17:36:37 +02:00
usb treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 2019-05-30 11:26:37 -07:00
virtio treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 482 2019-06-19 17:09:52 +02:00
vm tools/vm/slabinfo: add sorting info to help menu 2019-07-12 11:05:46 -07:00
wmi treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
Makefile tools/power/x86: A tool to validate Intel Speed Select commands 2019-07-03 15:37:09 +03:00