367 lines
8.6 KiB
C
367 lines
8.6 KiB
C
/*
|
|
* arch/ppc/platforms/82xx/pq2ads_pd.c
|
|
*
|
|
* MPC82xx Board-specific PlatformDevice descriptions
|
|
*
|
|
* 2005 (c) MontaVista Software, Inc.
|
|
* Vitaly Bordug <vbordug@ru.mvista.com>
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public License
|
|
* version 2. This program is licensed "as is" without any warranty of any
|
|
* kind, whether express or implied.
|
|
*/
|
|
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/device.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/fs_enet_pd.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/mpc8260.h>
|
|
#include <asm/cpm2.h>
|
|
#include <asm/immap_cpm2.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/ppc_sys.h>
|
|
#include <asm/ppcboot.h>
|
|
#include <linux/fs_uart_pd.h>
|
|
|
|
#include "pq2ads_pd.h"
|
|
|
|
static void init_fcc1_ioports(void);
|
|
static void init_fcc2_ioports(void);
|
|
static void init_scc1_uart_ioports(void);
|
|
static void init_scc4_uart_ioports(void);
|
|
|
|
static struct fs_uart_platform_info mpc8272_uart_pdata[] = {
|
|
[fsid_scc1_uart] = {
|
|
.init_ioports = init_scc1_uart_ioports,
|
|
.fs_no = fsid_scc1_uart,
|
|
.brg = 1,
|
|
.tx_num_fifo = 4,
|
|
.tx_buf_size = 32,
|
|
.rx_num_fifo = 4,
|
|
.rx_buf_size = 32,
|
|
},
|
|
[fsid_scc4_uart] = {
|
|
.init_ioports = init_scc4_uart_ioports,
|
|
.fs_no = fsid_scc4_uart,
|
|
.brg = 4,
|
|
.tx_num_fifo = 4,
|
|
.tx_buf_size = 32,
|
|
.rx_num_fifo = 4,
|
|
.rx_buf_size = 32,
|
|
},
|
|
};
|
|
|
|
static struct fs_mii_bb_platform_info m82xx_mii_bb_pdata = {
|
|
.mdio_dat.bit = 18,
|
|
.mdio_dir.bit = 18,
|
|
.mdc_dat.bit = 19,
|
|
.delay = 1,
|
|
};
|
|
|
|
static struct fs_platform_info mpc82xx_enet_pdata[] = {
|
|
[fsid_fcc1] = {
|
|
.fs_no = fsid_fcc1,
|
|
.cp_page = CPM_CR_FCC1_PAGE,
|
|
.cp_block = CPM_CR_FCC1_SBLOCK,
|
|
|
|
.clk_trx = (PC_F1RXCLK | PC_F1TXCLK),
|
|
.clk_route = CMX1_CLK_ROUTE,
|
|
.clk_mask = CMX1_CLK_MASK,
|
|
.init_ioports = init_fcc1_ioports,
|
|
|
|
.mem_offset = FCC1_MEM_OFFSET,
|
|
|
|
.rx_ring = 32,
|
|
.tx_ring = 32,
|
|
.rx_copybreak = 240,
|
|
.use_napi = 0,
|
|
.napi_weight = 17,
|
|
.bus_id = "0:00",
|
|
},
|
|
[fsid_fcc2] = {
|
|
.fs_no = fsid_fcc2,
|
|
.cp_page = CPM_CR_FCC2_PAGE,
|
|
.cp_block = CPM_CR_FCC2_SBLOCK,
|
|
.clk_trx = (PC_F2RXCLK | PC_F2TXCLK),
|
|
.clk_route = CMX2_CLK_ROUTE,
|
|
.clk_mask = CMX2_CLK_MASK,
|
|
.init_ioports = init_fcc2_ioports,
|
|
|
|
.mem_offset = FCC2_MEM_OFFSET,
|
|
|
|
.rx_ring = 32,
|
|
.tx_ring = 32,
|
|
.rx_copybreak = 240,
|
|
.use_napi = 0,
|
|
.napi_weight = 17,
|
|
.bus_id = "0:03",
|
|
},
|
|
};
|
|
|
|
static void init_fcc1_ioports(void)
|
|
{
|
|
struct io_port *io;
|
|
u32 tempval;
|
|
cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
|
|
u32 *bcsr = ioremap(BCSR_ADDR+4, sizeof(u32));
|
|
|
|
io = &immap->im_ioport;
|
|
|
|
/* Enable the PHY */
|
|
clrbits32(bcsr, BCSR1_FETHIEN);
|
|
setbits32(bcsr, BCSR1_FETH_RST);
|
|
|
|
/* FCC1 pins are on port A/C. */
|
|
/* Configure port A and C pins for FCC1 Ethernet. */
|
|
|
|
tempval = in_be32(&io->iop_pdira);
|
|
tempval &= ~PA1_DIRA0;
|
|
tempval |= PA1_DIRA1;
|
|
out_be32(&io->iop_pdira, tempval);
|
|
|
|
tempval = in_be32(&io->iop_psora);
|
|
tempval &= ~PA1_PSORA0;
|
|
tempval |= PA1_PSORA1;
|
|
out_be32(&io->iop_psora, tempval);
|
|
|
|
setbits32(&io->iop_ppara,PA1_DIRA0 | PA1_DIRA1);
|
|
|
|
/* Alter clocks */
|
|
tempval = PC_F1TXCLK|PC_F1RXCLK;
|
|
|
|
clrbits32(&io->iop_psorc, tempval);
|
|
clrbits32(&io->iop_pdirc, tempval);
|
|
setbits32(&io->iop_pparc, tempval);
|
|
|
|
clrbits32(&immap->im_cpmux.cmx_fcr, CMX1_CLK_MASK);
|
|
setbits32(&immap->im_cpmux.cmx_fcr, CMX1_CLK_ROUTE);
|
|
iounmap(bcsr);
|
|
iounmap(immap);
|
|
}
|
|
|
|
static void init_fcc2_ioports(void)
|
|
{
|
|
cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
|
|
u32 *bcsr = ioremap(BCSR_ADDR+12, sizeof(u32));
|
|
|
|
struct io_port *io;
|
|
u32 tempval;
|
|
|
|
immap = cpm2_immr;
|
|
|
|
io = &immap->im_ioport;
|
|
|
|
/* Enable the PHY */
|
|
clrbits32(bcsr, BCSR3_FETHIEN2);
|
|
setbits32(bcsr, BCSR3_FETH2_RST);
|
|
|
|
/* FCC2 are port B/C. */
|
|
/* Configure port A and C pins for FCC2 Ethernet. */
|
|
|
|
tempval = in_be32(&io->iop_pdirb);
|
|
tempval &= ~PB2_DIRB0;
|
|
tempval |= PB2_DIRB1;
|
|
out_be32(&io->iop_pdirb, tempval);
|
|
|
|
tempval = in_be32(&io->iop_psorb);
|
|
tempval &= ~PB2_PSORB0;
|
|
tempval |= PB2_PSORB1;
|
|
out_be32(&io->iop_psorb, tempval);
|
|
|
|
setbits32(&io->iop_pparb,PB2_DIRB0 | PB2_DIRB1);
|
|
|
|
tempval = PC_F2RXCLK|PC_F2TXCLK;
|
|
|
|
/* Alter clocks */
|
|
clrbits32(&io->iop_psorc,tempval);
|
|
clrbits32(&io->iop_pdirc,tempval);
|
|
setbits32(&io->iop_pparc,tempval);
|
|
|
|
clrbits32(&immap->im_cpmux.cmx_fcr, CMX2_CLK_MASK);
|
|
setbits32(&immap->im_cpmux.cmx_fcr, CMX2_CLK_ROUTE);
|
|
|
|
iounmap(bcsr);
|
|
iounmap(immap);
|
|
}
|
|
|
|
|
|
static void __init mpc8272ads_fixup_enet_pdata(struct platform_device *pdev,
|
|
int idx)
|
|
{
|
|
bd_t* bi = (void*)__res;
|
|
int fs_no = fsid_fcc1+pdev->id-1;
|
|
|
|
if(fs_no > ARRAY_SIZE(mpc82xx_enet_pdata)) {
|
|
return;
|
|
}
|
|
|
|
mpc82xx_enet_pdata[fs_no].dpram_offset=
|
|
(u32)cpm2_immr->im_dprambase;
|
|
mpc82xx_enet_pdata[fs_no].fcc_regs_c =
|
|
(u32)cpm2_immr->im_fcc_c;
|
|
memcpy(&mpc82xx_enet_pdata[fs_no].macaddr,bi->bi_enetaddr,6);
|
|
|
|
/* prevent dup mac */
|
|
if(fs_no == fsid_fcc2)
|
|
mpc82xx_enet_pdata[fs_no].macaddr[5] ^= 1;
|
|
|
|
pdev->dev.platform_data = &mpc82xx_enet_pdata[fs_no];
|
|
}
|
|
|
|
static void mpc8272ads_fixup_uart_pdata(struct platform_device *pdev,
|
|
int idx)
|
|
{
|
|
bd_t *bd = (bd_t *) __res;
|
|
struct fs_uart_platform_info *pinfo;
|
|
int num = ARRAY_SIZE(mpc8272_uart_pdata);
|
|
int id = fs_uart_id_scc2fsid(idx);
|
|
|
|
/* no need to alter anything if console */
|
|
if ((id <= num) && (!pdev->dev.platform_data)) {
|
|
pinfo = &mpc8272_uart_pdata[id];
|
|
pinfo->uart_clk = bd->bi_intfreq;
|
|
pdev->dev.platform_data = pinfo;
|
|
}
|
|
}
|
|
|
|
static void init_scc1_uart_ioports(void)
|
|
{
|
|
cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
|
|
|
|
/* SCC1 is only on port D */
|
|
setbits32(&immap->im_ioport.iop_ppard,0x00000003);
|
|
clrbits32(&immap->im_ioport.iop_psord,0x00000001);
|
|
setbits32(&immap->im_ioport.iop_psord,0x00000002);
|
|
clrbits32(&immap->im_ioport.iop_pdird,0x00000001);
|
|
setbits32(&immap->im_ioport.iop_pdird,0x00000002);
|
|
|
|
/* Wire BRG1 to SCC1 */
|
|
clrbits32(&immap->im_cpmux.cmx_scr,0x00ffffff);
|
|
|
|
iounmap(immap);
|
|
}
|
|
|
|
static void init_scc4_uart_ioports(void)
|
|
{
|
|
cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
|
|
|
|
setbits32(&immap->im_ioport.iop_ppard,0x00000600);
|
|
clrbits32(&immap->im_ioport.iop_psord,0x00000600);
|
|
clrbits32(&immap->im_ioport.iop_pdird,0x00000200);
|
|
setbits32(&immap->im_ioport.iop_pdird,0x00000400);
|
|
|
|
/* Wire BRG4 to SCC4 */
|
|
clrbits32(&immap->im_cpmux.cmx_scr,0x000000ff);
|
|
setbits32(&immap->im_cpmux.cmx_scr,0x0000001b);
|
|
|
|
iounmap(immap);
|
|
}
|
|
|
|
static void __init mpc8272ads_fixup_mdio_pdata(struct platform_device *pdev,
|
|
int idx)
|
|
{
|
|
m82xx_mii_bb_pdata.irq[0] = PHY_INTERRUPT;
|
|
m82xx_mii_bb_pdata.irq[1] = -1;
|
|
m82xx_mii_bb_pdata.irq[2] = -1;
|
|
m82xx_mii_bb_pdata.irq[3] = PHY_INTERRUPT;
|
|
m82xx_mii_bb_pdata.irq[31] = -1;
|
|
|
|
|
|
m82xx_mii_bb_pdata.mdio_dat.offset =
|
|
(u32)&cpm2_immr->im_ioport.iop_pdatc;
|
|
|
|
m82xx_mii_bb_pdata.mdio_dir.offset =
|
|
(u32)&cpm2_immr->im_ioport.iop_pdirc;
|
|
|
|
m82xx_mii_bb_pdata.mdc_dat.offset =
|
|
(u32)&cpm2_immr->im_ioport.iop_pdatc;
|
|
|
|
|
|
pdev->dev.platform_data = &m82xx_mii_bb_pdata;
|
|
}
|
|
|
|
static int mpc8272ads_platform_notify(struct device *dev)
|
|
{
|
|
static const struct platform_notify_dev_map dev_map[] = {
|
|
{
|
|
.bus_id = "fsl-cpm-fcc",
|
|
.rtn = mpc8272ads_fixup_enet_pdata,
|
|
},
|
|
{
|
|
.bus_id = "fsl-cpm-scc:uart",
|
|
.rtn = mpc8272ads_fixup_uart_pdata,
|
|
},
|
|
{
|
|
.bus_id = "fsl-bb-mdio",
|
|
.rtn = mpc8272ads_fixup_mdio_pdata,
|
|
},
|
|
{
|
|
.bus_id = NULL
|
|
}
|
|
};
|
|
platform_notify_map(dev_map,dev);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
int __init mpc8272ads_init(void)
|
|
{
|
|
printk(KERN_NOTICE "mpc8272ads: Init\n");
|
|
|
|
platform_notify = mpc8272ads_platform_notify;
|
|
|
|
ppc_sys_device_initfunc();
|
|
|
|
ppc_sys_device_disable_all();
|
|
ppc_sys_device_enable(MPC82xx_CPM_FCC1);
|
|
ppc_sys_device_enable(MPC82xx_CPM_FCC2);
|
|
|
|
/* to be ready for console, let's attach pdata here */
|
|
#ifdef CONFIG_SERIAL_CPM_SCC1
|
|
ppc_sys_device_setfunc(MPC82xx_CPM_SCC1, PPC_SYS_FUNC_UART);
|
|
ppc_sys_device_enable(MPC82xx_CPM_SCC1);
|
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_SERIAL_CPM_SCC4
|
|
ppc_sys_device_setfunc(MPC82xx_CPM_SCC4, PPC_SYS_FUNC_UART);
|
|
ppc_sys_device_enable(MPC82xx_CPM_SCC4);
|
|
#endif
|
|
|
|
ppc_sys_device_enable(MPC82xx_MDIO_BB);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
To prevent confusion, console selection is gross:
|
|
by 0 assumed SCC1 and by 1 assumed SCC4
|
|
*/
|
|
struct platform_device* early_uart_get_pdev(int index)
|
|
{
|
|
bd_t *bd = (bd_t *) __res;
|
|
struct fs_uart_platform_info *pinfo;
|
|
|
|
struct platform_device* pdev = NULL;
|
|
if(index) { /*assume SCC4 here*/
|
|
pdev = &ppc_sys_platform_devices[MPC82xx_CPM_SCC4];
|
|
pinfo = &mpc8272_uart_pdata[fsid_scc4_uart];
|
|
} else { /*over SCC1*/
|
|
pdev = &ppc_sys_platform_devices[MPC82xx_CPM_SCC1];
|
|
pinfo = &mpc8272_uart_pdata[fsid_scc1_uart];
|
|
}
|
|
|
|
pinfo->uart_clk = bd->bi_intfreq;
|
|
pdev->dev.platform_data = pinfo;
|
|
ppc_sys_fixup_mem_resource(pdev, CPM_MAP_ADDR);
|
|
return NULL;
|
|
}
|
|
|
|
arch_initcall(mpc8272ads_init);
|