617 lines
14 KiB
C
617 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Fitipower FC0013 tuner driver
|
|
*
|
|
* Copyright (C) 2012 Hans-Frieder Vogt <hfvogt@gmx.net>
|
|
* partially based on driver code from Fitipower
|
|
* Copyright (C) 2010 Fitipower Integrated Technology Inc
|
|
*/
|
|
|
|
#include "fc0013.h"
|
|
#include "fc0013-priv.h"
|
|
|
|
static int fc0013_writereg(struct fc0013_priv *priv, u8 reg, u8 val)
|
|
{
|
|
u8 buf[2] = {reg, val};
|
|
struct i2c_msg msg = {
|
|
.addr = priv->addr, .flags = 0, .buf = buf, .len = 2
|
|
};
|
|
|
|
if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
|
|
err("I2C write reg failed, reg: %02x, val: %02x", reg, val);
|
|
return -EREMOTEIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int fc0013_readreg(struct fc0013_priv *priv, u8 reg, u8 *val)
|
|
{
|
|
struct i2c_msg msg[2] = {
|
|
{ .addr = priv->addr, .flags = 0, .buf = ®, .len = 1 },
|
|
{ .addr = priv->addr, .flags = I2C_M_RD, .buf = val, .len = 1 },
|
|
};
|
|
|
|
if (i2c_transfer(priv->i2c, msg, 2) != 2) {
|
|
err("I2C read reg failed, reg: %02x", reg);
|
|
return -EREMOTEIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void fc0013_release(struct dvb_frontend *fe)
|
|
{
|
|
kfree(fe->tuner_priv);
|
|
fe->tuner_priv = NULL;
|
|
}
|
|
|
|
static int fc0013_init(struct dvb_frontend *fe)
|
|
{
|
|
struct fc0013_priv *priv = fe->tuner_priv;
|
|
int i, ret = 0;
|
|
unsigned char reg[] = {
|
|
0x00, /* reg. 0x00: dummy */
|
|
0x09, /* reg. 0x01 */
|
|
0x16, /* reg. 0x02 */
|
|
0x00, /* reg. 0x03 */
|
|
0x00, /* reg. 0x04 */
|
|
0x17, /* reg. 0x05 */
|
|
0x02, /* reg. 0x06 */
|
|
0x0a, /* reg. 0x07: CHECK */
|
|
0xff, /* reg. 0x08: AGC Clock divide by 256, AGC gain 1/256,
|
|
Loop Bw 1/8 */
|
|
0x6f, /* reg. 0x09: enable LoopThrough */
|
|
0xb8, /* reg. 0x0a: Disable LO Test Buffer */
|
|
0x82, /* reg. 0x0b: CHECK */
|
|
0xfc, /* reg. 0x0c: depending on AGC Up-Down mode, may need 0xf8 */
|
|
0x01, /* reg. 0x0d: AGC Not Forcing & LNA Forcing, may need 0x02 */
|
|
0x00, /* reg. 0x0e */
|
|
0x00, /* reg. 0x0f */
|
|
0x00, /* reg. 0x10 */
|
|
0x00, /* reg. 0x11 */
|
|
0x00, /* reg. 0x12 */
|
|
0x00, /* reg. 0x13 */
|
|
0x50, /* reg. 0x14: DVB-t High Gain, UHF.
|
|
Middle Gain: 0x48, Low Gain: 0x40 */
|
|
0x01, /* reg. 0x15 */
|
|
};
|
|
|
|
switch (priv->xtal_freq) {
|
|
case FC_XTAL_27_MHZ:
|
|
case FC_XTAL_28_8_MHZ:
|
|
reg[0x07] |= 0x20;
|
|
break;
|
|
case FC_XTAL_36_MHZ:
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (priv->dual_master)
|
|
reg[0x0c] |= 0x02;
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
|
|
|
|
for (i = 1; i < sizeof(reg); i++) {
|
|
ret = fc0013_writereg(priv, i, reg[i]);
|
|
if (ret)
|
|
break;
|
|
}
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
|
|
|
|
if (ret)
|
|
err("fc0013_writereg failed: %d", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int fc0013_sleep(struct dvb_frontend *fe)
|
|
{
|
|
/* nothing to do here */
|
|
return 0;
|
|
}
|
|
|
|
int fc0013_rc_cal_add(struct dvb_frontend *fe, int rc_val)
|
|
{
|
|
struct fc0013_priv *priv = fe->tuner_priv;
|
|
int ret;
|
|
u8 rc_cal;
|
|
int val;
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
|
|
|
|
/* push rc_cal value, get rc_cal value */
|
|
ret = fc0013_writereg(priv, 0x10, 0x00);
|
|
if (ret)
|
|
goto error_out;
|
|
|
|
/* get rc_cal value */
|
|
ret = fc0013_readreg(priv, 0x10, &rc_cal);
|
|
if (ret)
|
|
goto error_out;
|
|
|
|
rc_cal &= 0x0f;
|
|
|
|
val = (int)rc_cal + rc_val;
|
|
|
|
/* forcing rc_cal */
|
|
ret = fc0013_writereg(priv, 0x0d, 0x11);
|
|
if (ret)
|
|
goto error_out;
|
|
|
|
/* modify rc_cal value */
|
|
if (val > 15)
|
|
ret = fc0013_writereg(priv, 0x10, 0x0f);
|
|
else if (val < 0)
|
|
ret = fc0013_writereg(priv, 0x10, 0x00);
|
|
else
|
|
ret = fc0013_writereg(priv, 0x10, (u8)val);
|
|
|
|
error_out:
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(fc0013_rc_cal_add);
|
|
|
|
int fc0013_rc_cal_reset(struct dvb_frontend *fe)
|
|
{
|
|
struct fc0013_priv *priv = fe->tuner_priv;
|
|
int ret;
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
|
|
|
|
ret = fc0013_writereg(priv, 0x0d, 0x01);
|
|
if (!ret)
|
|
ret = fc0013_writereg(priv, 0x10, 0x00);
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(fc0013_rc_cal_reset);
|
|
|
|
static int fc0013_set_vhf_track(struct fc0013_priv *priv, u32 freq)
|
|
{
|
|
int ret;
|
|
u8 tmp;
|
|
|
|
ret = fc0013_readreg(priv, 0x1d, &tmp);
|
|
if (ret)
|
|
goto error_out;
|
|
tmp &= 0xe3;
|
|
if (freq <= 177500) { /* VHF Track: 7 */
|
|
ret = fc0013_writereg(priv, 0x1d, tmp | 0x1c);
|
|
} else if (freq <= 184500) { /* VHF Track: 6 */
|
|
ret = fc0013_writereg(priv, 0x1d, tmp | 0x18);
|
|
} else if (freq <= 191500) { /* VHF Track: 5 */
|
|
ret = fc0013_writereg(priv, 0x1d, tmp | 0x14);
|
|
} else if (freq <= 198500) { /* VHF Track: 4 */
|
|
ret = fc0013_writereg(priv, 0x1d, tmp | 0x10);
|
|
} else if (freq <= 205500) { /* VHF Track: 3 */
|
|
ret = fc0013_writereg(priv, 0x1d, tmp | 0x0c);
|
|
} else if (freq <= 219500) { /* VHF Track: 2 */
|
|
ret = fc0013_writereg(priv, 0x1d, tmp | 0x08);
|
|
} else if (freq < 300000) { /* VHF Track: 1 */
|
|
ret = fc0013_writereg(priv, 0x1d, tmp | 0x04);
|
|
} else { /* UHF and GPS */
|
|
ret = fc0013_writereg(priv, 0x1d, tmp | 0x1c);
|
|
}
|
|
error_out:
|
|
return ret;
|
|
}
|
|
|
|
static int fc0013_set_params(struct dvb_frontend *fe)
|
|
{
|
|
struct fc0013_priv *priv = fe->tuner_priv;
|
|
int i, ret = 0;
|
|
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
|
|
u32 freq = p->frequency / 1000;
|
|
u32 delsys = p->delivery_system;
|
|
unsigned char reg[7], am, pm, multi, tmp;
|
|
unsigned long f_vco;
|
|
unsigned short xtal_freq_khz_2, xin, xdiv;
|
|
bool vco_select = false;
|
|
|
|
if (fe->callback) {
|
|
ret = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER,
|
|
FC_FE_CALLBACK_VHF_ENABLE, (freq > 300000 ? 0 : 1));
|
|
if (ret)
|
|
goto exit;
|
|
}
|
|
|
|
switch (priv->xtal_freq) {
|
|
case FC_XTAL_27_MHZ:
|
|
xtal_freq_khz_2 = 27000 / 2;
|
|
break;
|
|
case FC_XTAL_36_MHZ:
|
|
xtal_freq_khz_2 = 36000 / 2;
|
|
break;
|
|
case FC_XTAL_28_8_MHZ:
|
|
default:
|
|
xtal_freq_khz_2 = 28800 / 2;
|
|
break;
|
|
}
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
|
|
|
|
/* set VHF track */
|
|
ret = fc0013_set_vhf_track(priv, freq);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
if (freq < 300000) {
|
|
/* enable VHF filter */
|
|
ret = fc0013_readreg(priv, 0x07, &tmp);
|
|
if (ret)
|
|
goto exit;
|
|
ret = fc0013_writereg(priv, 0x07, tmp | 0x10);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
/* disable UHF & disable GPS */
|
|
ret = fc0013_readreg(priv, 0x14, &tmp);
|
|
if (ret)
|
|
goto exit;
|
|
ret = fc0013_writereg(priv, 0x14, tmp & 0x1f);
|
|
if (ret)
|
|
goto exit;
|
|
} else if (freq <= 862000) {
|
|
/* disable VHF filter */
|
|
ret = fc0013_readreg(priv, 0x07, &tmp);
|
|
if (ret)
|
|
goto exit;
|
|
ret = fc0013_writereg(priv, 0x07, tmp & 0xef);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
/* enable UHF & disable GPS */
|
|
ret = fc0013_readreg(priv, 0x14, &tmp);
|
|
if (ret)
|
|
goto exit;
|
|
ret = fc0013_writereg(priv, 0x14, (tmp & 0x1f) | 0x40);
|
|
if (ret)
|
|
goto exit;
|
|
} else {
|
|
/* disable VHF filter */
|
|
ret = fc0013_readreg(priv, 0x07, &tmp);
|
|
if (ret)
|
|
goto exit;
|
|
ret = fc0013_writereg(priv, 0x07, tmp & 0xef);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
/* disable UHF & enable GPS */
|
|
ret = fc0013_readreg(priv, 0x14, &tmp);
|
|
if (ret)
|
|
goto exit;
|
|
ret = fc0013_writereg(priv, 0x14, (tmp & 0x1f) | 0x20);
|
|
if (ret)
|
|
goto exit;
|
|
}
|
|
|
|
/* select frequency divider and the frequency of VCO */
|
|
if (freq < 37084) { /* freq * 96 < 3560000 */
|
|
multi = 96;
|
|
reg[5] = 0x82;
|
|
reg[6] = 0x00;
|
|
} else if (freq < 55625) { /* freq * 64 < 3560000 */
|
|
multi = 64;
|
|
reg[5] = 0x02;
|
|
reg[6] = 0x02;
|
|
} else if (freq < 74167) { /* freq * 48 < 3560000 */
|
|
multi = 48;
|
|
reg[5] = 0x42;
|
|
reg[6] = 0x00;
|
|
} else if (freq < 111250) { /* freq * 32 < 3560000 */
|
|
multi = 32;
|
|
reg[5] = 0x82;
|
|
reg[6] = 0x02;
|
|
} else if (freq < 148334) { /* freq * 24 < 3560000 */
|
|
multi = 24;
|
|
reg[5] = 0x22;
|
|
reg[6] = 0x00;
|
|
} else if (freq < 222500) { /* freq * 16 < 3560000 */
|
|
multi = 16;
|
|
reg[5] = 0x42;
|
|
reg[6] = 0x02;
|
|
} else if (freq < 296667) { /* freq * 12 < 3560000 */
|
|
multi = 12;
|
|
reg[5] = 0x12;
|
|
reg[6] = 0x00;
|
|
} else if (freq < 445000) { /* freq * 8 < 3560000 */
|
|
multi = 8;
|
|
reg[5] = 0x22;
|
|
reg[6] = 0x02;
|
|
} else if (freq < 593334) { /* freq * 6 < 3560000 */
|
|
multi = 6;
|
|
reg[5] = 0x0a;
|
|
reg[6] = 0x00;
|
|
} else if (freq < 950000) { /* freq * 4 < 3800000 */
|
|
multi = 4;
|
|
reg[5] = 0x12;
|
|
reg[6] = 0x02;
|
|
} else {
|
|
multi = 2;
|
|
reg[5] = 0x0a;
|
|
reg[6] = 0x02;
|
|
}
|
|
|
|
f_vco = freq * multi;
|
|
|
|
if (f_vco >= 3060000) {
|
|
reg[6] |= 0x08;
|
|
vco_select = true;
|
|
}
|
|
|
|
if (freq >= 45000) {
|
|
/* From divided value (XDIV) determined the FA and FP value */
|
|
xdiv = (unsigned short)(f_vco / xtal_freq_khz_2);
|
|
if ((f_vco - xdiv * xtal_freq_khz_2) >= (xtal_freq_khz_2 / 2))
|
|
xdiv++;
|
|
|
|
pm = (unsigned char)(xdiv / 8);
|
|
am = (unsigned char)(xdiv - (8 * pm));
|
|
|
|
if (am < 2) {
|
|
reg[1] = am + 8;
|
|
reg[2] = pm - 1;
|
|
} else {
|
|
reg[1] = am;
|
|
reg[2] = pm;
|
|
}
|
|
} else {
|
|
/* fix for frequency less than 45 MHz */
|
|
reg[1] = 0x06;
|
|
reg[2] = 0x11;
|
|
}
|
|
|
|
/* fix clock out */
|
|
reg[6] |= 0x20;
|
|
|
|
/* From VCO frequency determines the XIN ( fractional part of Delta
|
|
Sigma PLL) and divided value (XDIV) */
|
|
xin = (unsigned short)(f_vco - (f_vco / xtal_freq_khz_2) * xtal_freq_khz_2);
|
|
xin = (xin << 15) / xtal_freq_khz_2;
|
|
if (xin >= 16384)
|
|
xin += 32768;
|
|
|
|
reg[3] = xin >> 8;
|
|
reg[4] = xin & 0xff;
|
|
|
|
if (delsys == SYS_DVBT) {
|
|
reg[6] &= 0x3f; /* bits 6 and 7 describe the bandwidth */
|
|
switch (p->bandwidth_hz) {
|
|
case 6000000:
|
|
reg[6] |= 0x80;
|
|
break;
|
|
case 7000000:
|
|
reg[6] |= 0x40;
|
|
break;
|
|
case 8000000:
|
|
default:
|
|
break;
|
|
}
|
|
} else {
|
|
err("%s: modulation type not supported!", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* modified for Realtek demod */
|
|
reg[5] |= 0x07;
|
|
|
|
for (i = 1; i <= 6; i++) {
|
|
ret = fc0013_writereg(priv, i, reg[i]);
|
|
if (ret)
|
|
goto exit;
|
|
}
|
|
|
|
ret = fc0013_readreg(priv, 0x11, &tmp);
|
|
if (ret)
|
|
goto exit;
|
|
if (multi == 64)
|
|
ret = fc0013_writereg(priv, 0x11, tmp | 0x04);
|
|
else
|
|
ret = fc0013_writereg(priv, 0x11, tmp & 0xfb);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
/* VCO Calibration */
|
|
ret = fc0013_writereg(priv, 0x0e, 0x80);
|
|
if (!ret)
|
|
ret = fc0013_writereg(priv, 0x0e, 0x00);
|
|
|
|
/* VCO Re-Calibration if needed */
|
|
if (!ret)
|
|
ret = fc0013_writereg(priv, 0x0e, 0x00);
|
|
|
|
if (!ret) {
|
|
msleep(10);
|
|
ret = fc0013_readreg(priv, 0x0e, &tmp);
|
|
}
|
|
if (ret)
|
|
goto exit;
|
|
|
|
/* vco selection */
|
|
tmp &= 0x3f;
|
|
|
|
if (vco_select) {
|
|
if (tmp > 0x3c) {
|
|
reg[6] &= ~0x08;
|
|
ret = fc0013_writereg(priv, 0x06, reg[6]);
|
|
if (!ret)
|
|
ret = fc0013_writereg(priv, 0x0e, 0x80);
|
|
if (!ret)
|
|
ret = fc0013_writereg(priv, 0x0e, 0x00);
|
|
}
|
|
} else {
|
|
if (tmp < 0x02) {
|
|
reg[6] |= 0x08;
|
|
ret = fc0013_writereg(priv, 0x06, reg[6]);
|
|
if (!ret)
|
|
ret = fc0013_writereg(priv, 0x0e, 0x80);
|
|
if (!ret)
|
|
ret = fc0013_writereg(priv, 0x0e, 0x00);
|
|
}
|
|
}
|
|
|
|
priv->frequency = p->frequency;
|
|
priv->bandwidth = p->bandwidth_hz;
|
|
|
|
exit:
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
|
|
if (ret)
|
|
warn("%s: failed: %d", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
static int fc0013_get_frequency(struct dvb_frontend *fe, u32 *frequency)
|
|
{
|
|
struct fc0013_priv *priv = fe->tuner_priv;
|
|
*frequency = priv->frequency;
|
|
return 0;
|
|
}
|
|
|
|
static int fc0013_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
|
|
{
|
|
/* always ? */
|
|
*frequency = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int fc0013_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
|
|
{
|
|
struct fc0013_priv *priv = fe->tuner_priv;
|
|
*bandwidth = priv->bandwidth;
|
|
return 0;
|
|
}
|
|
|
|
#define INPUT_ADC_LEVEL -8
|
|
|
|
static int fc0013_get_rf_strength(struct dvb_frontend *fe, u16 *strength)
|
|
{
|
|
struct fc0013_priv *priv = fe->tuner_priv;
|
|
int ret;
|
|
unsigned char tmp;
|
|
int int_temp, lna_gain, int_lna, tot_agc_gain, power;
|
|
static const int fc0013_lna_gain_table[] = {
|
|
/* low gain */
|
|
-63, -58, -99, -73,
|
|
-63, -65, -54, -60,
|
|
/* middle gain */
|
|
71, 70, 68, 67,
|
|
65, 63, 61, 58,
|
|
/* high gain */
|
|
197, 191, 188, 186,
|
|
184, 182, 181, 179,
|
|
};
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
|
|
|
|
ret = fc0013_writereg(priv, 0x13, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = fc0013_readreg(priv, 0x13, &tmp);
|
|
if (ret)
|
|
goto err;
|
|
int_temp = tmp;
|
|
|
|
ret = fc0013_readreg(priv, 0x14, &tmp);
|
|
if (ret)
|
|
goto err;
|
|
lna_gain = tmp & 0x1f;
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
|
|
|
|
if (lna_gain < ARRAY_SIZE(fc0013_lna_gain_table)) {
|
|
int_lna = fc0013_lna_gain_table[lna_gain];
|
|
tot_agc_gain = (abs((int_temp >> 5) - 7) - 2 +
|
|
(int_temp & 0x1f)) * 2;
|
|
power = INPUT_ADC_LEVEL - tot_agc_gain - int_lna / 10;
|
|
|
|
if (power >= 45)
|
|
*strength = 255; /* 100% */
|
|
else if (power < -95)
|
|
*strength = 0;
|
|
else
|
|
*strength = (power + 95) * 255 / 140;
|
|
|
|
*strength |= *strength << 8;
|
|
} else {
|
|
ret = -1;
|
|
}
|
|
|
|
goto exit;
|
|
|
|
err:
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
|
|
exit:
|
|
if (ret)
|
|
warn("%s: failed: %d", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
static const struct dvb_tuner_ops fc0013_tuner_ops = {
|
|
.info = {
|
|
.name = "Fitipower FC0013",
|
|
|
|
.frequency_min_hz = 37 * MHz, /* estimate */
|
|
.frequency_max_hz = 1680 * MHz, /* CHECK */
|
|
},
|
|
|
|
.release = fc0013_release,
|
|
|
|
.init = fc0013_init,
|
|
.sleep = fc0013_sleep,
|
|
|
|
.set_params = fc0013_set_params,
|
|
|
|
.get_frequency = fc0013_get_frequency,
|
|
.get_if_frequency = fc0013_get_if_frequency,
|
|
.get_bandwidth = fc0013_get_bandwidth,
|
|
|
|
.get_rf_strength = fc0013_get_rf_strength,
|
|
};
|
|
|
|
struct dvb_frontend *fc0013_attach(struct dvb_frontend *fe,
|
|
struct i2c_adapter *i2c, u8 i2c_address, int dual_master,
|
|
enum fc001x_xtal_freq xtal_freq)
|
|
{
|
|
struct fc0013_priv *priv = NULL;
|
|
|
|
priv = kzalloc(sizeof(struct fc0013_priv), GFP_KERNEL);
|
|
if (priv == NULL)
|
|
return NULL;
|
|
|
|
priv->i2c = i2c;
|
|
priv->dual_master = dual_master;
|
|
priv->addr = i2c_address;
|
|
priv->xtal_freq = xtal_freq;
|
|
|
|
info("Fitipower FC0013 successfully attached.");
|
|
|
|
fe->tuner_priv = priv;
|
|
|
|
memcpy(&fe->ops.tuner_ops, &fc0013_tuner_ops,
|
|
sizeof(struct dvb_tuner_ops));
|
|
|
|
return fe;
|
|
}
|
|
EXPORT_SYMBOL(fc0013_attach);
|
|
|
|
MODULE_DESCRIPTION("Fitipower FC0013 silicon tuner driver");
|
|
MODULE_AUTHOR("Hans-Frieder Vogt <hfvogt@gmx.net>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION("0.2");
|