linux-sg2042/drivers/extcon/extcon-arizona.c

1259 lines
31 KiB
C

/*
* extcon-arizona.c - Extcon driver Wolfson Arizona devices
*
* Copyright (C) 2012 Wolfson Microelectronics plc
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
#include <linux/extcon.h>
#include <sound/soc.h>
#include <linux/mfd/arizona/core.h>
#include <linux/mfd/arizona/pdata.h>
#include <linux/mfd/arizona/registers.h>
#define ARIZONA_NUM_BUTTONS 6
#define ARIZONA_ACCDET_MODE_MIC 0
#define ARIZONA_ACCDET_MODE_HPL 1
#define ARIZONA_ACCDET_MODE_HPR 2
struct arizona_extcon_info {
struct device *dev;
struct arizona *arizona;
struct mutex lock;
struct regulator *micvdd;
struct input_dev *input;
int micd_mode;
const struct arizona_micd_config *micd_modes;
int micd_num_modes;
bool micd_reva;
bool micd_clamp;
struct delayed_work hpdet_work;
bool hpdet_active;
bool hpdet_done;
int num_hpdet_res;
unsigned int hpdet_res[3];
bool mic;
bool detecting;
int jack_flips;
int hpdet_ip;
struct extcon_dev edev;
};
static const struct arizona_micd_config micd_default_modes[] = {
{ 0, 2 << ARIZONA_MICD_BIAS_SRC_SHIFT, 1 },
{ ARIZONA_ACCDET_SRC, 1 << ARIZONA_MICD_BIAS_SRC_SHIFT, 0 },
};
static struct {
u16 status;
int report;
} arizona_lvl_to_key[ARIZONA_NUM_BUTTONS] = {
{ 0x1, BTN_0 },
{ 0x2, BTN_1 },
{ 0x4, BTN_2 },
{ 0x8, BTN_3 },
{ 0x10, BTN_4 },
{ 0x20, BTN_5 },
};
#define ARIZONA_CABLE_MECHANICAL 0
#define ARIZONA_CABLE_MICROPHONE 1
#define ARIZONA_CABLE_HEADPHONE 2
#define ARIZONA_CABLE_LINEOUT 3
static const char *arizona_cable[] = {
"Mechanical",
"Microphone",
"Headphone",
"Line-out",
NULL,
};
static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode)
{
struct arizona *arizona = info->arizona;
if (arizona->pdata.micd_pol_gpio > 0)
gpio_set_value_cansleep(arizona->pdata.micd_pol_gpio,
info->micd_modes[mode].gpio);
regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
ARIZONA_MICD_BIAS_SRC_MASK,
info->micd_modes[mode].bias);
regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1,
ARIZONA_ACCDET_SRC, info->micd_modes[mode].src);
info->micd_mode = mode;
dev_dbg(arizona->dev, "Set jack polarity to %d\n", mode);
}
static const char *arizona_extcon_get_micbias(struct arizona_extcon_info *info)
{
switch (info->micd_modes[0].bias >> ARIZONA_MICD_BIAS_SRC_SHIFT) {
case 1:
return "MICBIAS1";
case 2:
return "MICBIAS2";
case 3:
return "MICBIAS3";
default:
return "MICVDD";
}
}
static void arizona_extcon_pulse_micbias(struct arizona_extcon_info *info)
{
struct arizona *arizona = info->arizona;
const char *widget = arizona_extcon_get_micbias(info);
struct snd_soc_dapm_context *dapm = arizona->dapm;
int ret;
mutex_lock(&dapm->card->dapm_mutex);
ret = snd_soc_dapm_force_enable_pin(dapm, widget);
if (ret != 0)
dev_warn(arizona->dev, "Failed to enable %s: %d\n",
widget, ret);
mutex_unlock(&dapm->card->dapm_mutex);
snd_soc_dapm_sync(dapm);
if (!arizona->pdata.micd_force_micbias) {
mutex_lock(&dapm->card->dapm_mutex);
ret = snd_soc_dapm_disable_pin(arizona->dapm, widget);
if (ret != 0)
dev_warn(arizona->dev, "Failed to disable %s: %d\n",
widget, ret);
mutex_unlock(&dapm->card->dapm_mutex);
snd_soc_dapm_sync(dapm);
}
}
static void arizona_start_mic(struct arizona_extcon_info *info)
{
struct arizona *arizona = info->arizona;
bool change;
int ret;
/* Microphone detection can't use idle mode */
pm_runtime_get(info->dev);
if (info->detecting) {
ret = regulator_allow_bypass(info->micvdd, false);
if (ret != 0) {
dev_err(arizona->dev,
"Failed to regulate MICVDD: %d\n",
ret);
}
}
ret = regulator_enable(info->micvdd);
if (ret != 0) {
dev_err(arizona->dev, "Failed to enable MICVDD: %d\n",
ret);
}
if (info->micd_reva) {
regmap_write(arizona->regmap, 0x80, 0x3);
regmap_write(arizona->regmap, 0x294, 0);
regmap_write(arizona->regmap, 0x80, 0x0);
}
regmap_update_bits(arizona->regmap,
ARIZONA_ACCESSORY_DETECT_MODE_1,
ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
arizona_extcon_pulse_micbias(info);
regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
ARIZONA_MICD_ENA, ARIZONA_MICD_ENA,
&change);
if (!change) {
regulator_disable(info->micvdd);
pm_runtime_put_autosuspend(info->dev);
}
}
static void arizona_stop_mic(struct arizona_extcon_info *info)
{
struct arizona *arizona = info->arizona;
const char *widget = arizona_extcon_get_micbias(info);
struct snd_soc_dapm_context *dapm = arizona->dapm;
bool change;
int ret;
regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
ARIZONA_MICD_ENA, 0,
&change);
mutex_lock(&dapm->card->dapm_mutex);
ret = snd_soc_dapm_disable_pin(dapm, widget);
if (ret != 0)
dev_warn(arizona->dev,
"Failed to disable %s: %d\n",
widget, ret);
mutex_unlock(&dapm->card->dapm_mutex);
snd_soc_dapm_sync(dapm);
if (info->micd_reva) {
regmap_write(arizona->regmap, 0x80, 0x3);
regmap_write(arizona->regmap, 0x294, 2);
regmap_write(arizona->regmap, 0x80, 0x0);
}
ret = regulator_allow_bypass(info->micvdd, true);
if (ret != 0) {
dev_err(arizona->dev, "Failed to bypass MICVDD: %d\n",
ret);
}
if (change) {
regulator_disable(info->micvdd);
pm_runtime_mark_last_busy(info->dev);
pm_runtime_put_autosuspend(info->dev);
}
}
static struct {
unsigned int factor_a;
unsigned int factor_b;
} arizona_hpdet_b_ranges[] = {
{ 5528, 362464 },
{ 11084, 6186851 },
{ 11065, 65460395 },
};
static struct {
int min;
int max;
} arizona_hpdet_c_ranges[] = {
{ 0, 30 },
{ 8, 100 },
{ 100, 1000 },
{ 1000, 10000 },
};
static int arizona_hpdet_read(struct arizona_extcon_info *info)
{
struct arizona *arizona = info->arizona;
unsigned int val, range;
int ret;
ret = regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_2, &val);
if (ret != 0) {
dev_err(arizona->dev, "Failed to read HPDET status: %d\n",
ret);
return ret;
}
switch (info->hpdet_ip) {
case 0:
if (!(val & ARIZONA_HP_DONE)) {
dev_err(arizona->dev, "HPDET did not complete: %x\n",
val);
return -EAGAIN;
}
val &= ARIZONA_HP_LVL_MASK;
break;
case 1:
if (!(val & ARIZONA_HP_DONE_B)) {
dev_err(arizona->dev, "HPDET did not complete: %x\n",
val);
return -EAGAIN;
}
ret = regmap_read(arizona->regmap, ARIZONA_HP_DACVAL, &val);
if (ret != 0) {
dev_err(arizona->dev, "Failed to read HP value: %d\n",
ret);
return -EAGAIN;
}
regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1,
&range);
range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK)
>> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT;
if (range < ARRAY_SIZE(arizona_hpdet_b_ranges) - 1 &&
(val < 100 || val > 0x3fb)) {
range++;
dev_dbg(arizona->dev, "Moving to HPDET range %d\n",
range);
regmap_update_bits(arizona->regmap,
ARIZONA_HEADPHONE_DETECT_1,
ARIZONA_HP_IMPEDANCE_RANGE_MASK,
range <<
ARIZONA_HP_IMPEDANCE_RANGE_SHIFT);
return -EAGAIN;
}
/* If we go out of range report top of range */
if (val < 100 || val > 0x3fb) {
dev_dbg(arizona->dev, "Measurement out of range\n");
return 10000;
}
dev_dbg(arizona->dev, "HPDET read %d in range %d\n",
val, range);
val = arizona_hpdet_b_ranges[range].factor_b
/ ((val * 100) -
arizona_hpdet_b_ranges[range].factor_a);
break;
default:
dev_warn(arizona->dev, "Unknown HPDET IP revision %d\n",
info->hpdet_ip);
case 2:
if (!(val & ARIZONA_HP_DONE_B)) {
dev_err(arizona->dev, "HPDET did not complete: %x\n",
val);
return -EAGAIN;
}
val &= ARIZONA_HP_LVL_B_MASK;
regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1,
&range);
range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK)
>> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT;
/* Skip up or down a range? */
if (range && (val < arizona_hpdet_c_ranges[range].min)) {
range--;
dev_dbg(arizona->dev, "Moving to HPDET range %d-%d\n",
arizona_hpdet_c_ranges[range].min,
arizona_hpdet_c_ranges[range].max);
regmap_update_bits(arizona->regmap,
ARIZONA_HEADPHONE_DETECT_1,
ARIZONA_HP_IMPEDANCE_RANGE_MASK,
range <<
ARIZONA_HP_IMPEDANCE_RANGE_SHIFT);
return -EAGAIN;
}
if (range < ARRAY_SIZE(arizona_hpdet_c_ranges) - 1 &&
(val >= arizona_hpdet_c_ranges[range].max)) {
range++;
dev_dbg(arizona->dev, "Moving to HPDET range %d-%d\n",
arizona_hpdet_c_ranges[range].min,
arizona_hpdet_c_ranges[range].max);
regmap_update_bits(arizona->regmap,
ARIZONA_HEADPHONE_DETECT_1,
ARIZONA_HP_IMPEDANCE_RANGE_MASK,
range <<
ARIZONA_HP_IMPEDANCE_RANGE_SHIFT);
return -EAGAIN;
}
}
dev_dbg(arizona->dev, "HP impedance %d ohms\n", val);
return val;
}
static int arizona_hpdet_do_id(struct arizona_extcon_info *info, int *reading)
{
struct arizona *arizona = info->arizona;
int id_gpio = arizona->pdata.hpdet_id_gpio;
/*
* If we're using HPDET for accessory identification we need
* to take multiple measurements, step through them in sequence.
*/
if (arizona->pdata.hpdet_acc_id) {
info->hpdet_res[info->num_hpdet_res++] = *reading;
/*
* If the impedence is too high don't measure the
* second ground.
*/
if (info->num_hpdet_res == 1 && *reading >= 45) {
dev_dbg(arizona->dev, "Skipping ground flip\n");
info->hpdet_res[info->num_hpdet_res++] = *reading;
}
if (info->num_hpdet_res == 1) {
dev_dbg(arizona->dev, "Flipping ground\n");
regmap_update_bits(arizona->regmap,
ARIZONA_ACCESSORY_DETECT_MODE_1,
ARIZONA_ACCDET_SRC,
~info->micd_modes[0].src);
regmap_update_bits(arizona->regmap,
ARIZONA_HEADPHONE_DETECT_1,
ARIZONA_HP_POLL, ARIZONA_HP_POLL);
return -EAGAIN;
}
/* Only check the mic directly if we didn't already ID it */
if (id_gpio && info->num_hpdet_res == 2 &&
!((info->hpdet_res[0] > info->hpdet_res[1] * 2))) {
dev_dbg(arizona->dev, "Measuring mic\n");
regmap_update_bits(arizona->regmap,
ARIZONA_ACCESSORY_DETECT_MODE_1,
ARIZONA_ACCDET_MODE_MASK |
ARIZONA_ACCDET_SRC,
ARIZONA_ACCDET_MODE_HPR |
info->micd_modes[0].src);
gpio_set_value_cansleep(id_gpio, 1);
regmap_update_bits(arizona->regmap,
ARIZONA_HEADPHONE_DETECT_1,
ARIZONA_HP_POLL, ARIZONA_HP_POLL);
return -EAGAIN;
}
/* OK, got both. Now, compare... */
dev_dbg(arizona->dev, "HPDET measured %d %d %d\n",
info->hpdet_res[0], info->hpdet_res[1],
info->hpdet_res[2]);
/* Take the headphone impedance for the main report */
*reading = info->hpdet_res[0];
/*
* Either the two grounds measure differently or we
* measure the mic as high impedance.
*/
if ((info->hpdet_res[0] > info->hpdet_res[1] * 2) ||
(id_gpio && info->hpdet_res[2] > 10)) {
dev_dbg(arizona->dev, "Detected mic\n");
info->mic = true;
info->detecting = true;
} else {
dev_dbg(arizona->dev, "Detected headphone\n");
}
/* Make sure everything is reset back to the real polarity */
regmap_update_bits(arizona->regmap,
ARIZONA_ACCESSORY_DETECT_MODE_1,
ARIZONA_ACCDET_SRC,
info->micd_modes[0].src);
}
return 0;
}
static irqreturn_t arizona_hpdet_irq(int irq, void *data)
{
struct arizona_extcon_info *info = data;
struct arizona *arizona = info->arizona;
int id_gpio = arizona->pdata.hpdet_id_gpio;
int report = ARIZONA_CABLE_HEADPHONE;
unsigned int val;
int ret, reading;
mutex_lock(&info->lock);
/* If we got a spurious IRQ for some reason then ignore it */
if (!info->hpdet_active) {
dev_warn(arizona->dev, "Spurious HPDET IRQ\n");
mutex_unlock(&info->lock);
return IRQ_NONE;
}
/* If the cable was removed while measuring ignore the result */
ret = extcon_get_cable_state_(&info->edev, ARIZONA_CABLE_MECHANICAL);
if (ret < 0) {
dev_err(arizona->dev, "Failed to check cable state: %d\n",
ret);
goto out;
} else if (!ret) {
dev_dbg(arizona->dev, "Ignoring HPDET for removed cable\n");
goto done;
}
ret = arizona_hpdet_read(info);
if (ret == -EAGAIN) {
goto out;
} else if (ret < 0) {
goto done;
}
reading = ret;
/* Reset back to starting range */
regmap_update_bits(arizona->regmap,
ARIZONA_HEADPHONE_DETECT_1,
ARIZONA_HP_IMPEDANCE_RANGE_MASK | ARIZONA_HP_POLL,
0);
ret = arizona_hpdet_do_id(info, &reading);
if (ret == -EAGAIN) {
goto out;
} else if (ret < 0) {
goto done;
}
/* Report high impedence cables as line outputs */
if (reading >= 5000)
report = ARIZONA_CABLE_LINEOUT;
else
report = ARIZONA_CABLE_HEADPHONE;
ret = extcon_set_cable_state_(&info->edev, report, true);
if (ret != 0)
dev_err(arizona->dev, "Failed to report HP/line: %d\n",
ret);
mutex_lock(&arizona->dapm->card->dapm_mutex);
ret = regmap_read(arizona->regmap, ARIZONA_OUTPUT_ENABLES_1, &val);
if (ret != 0) {
dev_err(arizona->dev, "Failed to read output enables: %d\n",
ret);
val = 0;
}
if (!(val & (ARIZONA_OUT1L_ENA | ARIZONA_OUT1R_ENA))) {
ret = regmap_update_bits(arizona->regmap, 0x225, 0x4000, 0);
if (ret != 0)
dev_warn(arizona->dev, "Failed to undo magic: %d\n",
ret);
ret = regmap_update_bits(arizona->regmap, 0x226, 0x4000, 0);
if (ret != 0)
dev_warn(arizona->dev, "Failed to undo magic: %d\n",
ret);
}
mutex_unlock(&arizona->dapm->card->dapm_mutex);
done:
if (id_gpio)
gpio_set_value_cansleep(id_gpio, 0);
/* Revert back to MICDET mode */
regmap_update_bits(arizona->regmap,
ARIZONA_ACCESSORY_DETECT_MODE_1,
ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
/* If we have a mic then reenable MICDET */
if (info->mic)
arizona_start_mic(info);
if (info->hpdet_active) {
pm_runtime_put_autosuspend(info->dev);
info->hpdet_active = false;
}
info->hpdet_done = true;
out:
mutex_unlock(&info->lock);
return IRQ_HANDLED;
}
static void arizona_identify_headphone(struct arizona_extcon_info *info)
{
struct arizona *arizona = info->arizona;
int ret;
if (info->hpdet_done)
return;
dev_dbg(arizona->dev, "Starting HPDET\n");
/* Make sure we keep the device enabled during the measurement */
pm_runtime_get(info->dev);
info->hpdet_active = true;
if (info->mic)
arizona_stop_mic(info);
ret = regmap_update_bits(arizona->regmap, 0x225, 0x4000, 0x4000);
if (ret != 0)
dev_warn(arizona->dev, "Failed to do magic: %d\n", ret);
ret = regmap_update_bits(arizona->regmap, 0x226, 0x4000, 0x4000);
if (ret != 0)
dev_warn(arizona->dev, "Failed to do magic: %d\n", ret);
ret = regmap_update_bits(arizona->regmap,
ARIZONA_ACCESSORY_DETECT_MODE_1,
ARIZONA_ACCDET_MODE_MASK,
ARIZONA_ACCDET_MODE_HPL);
if (ret != 0) {
dev_err(arizona->dev, "Failed to set HPDETL mode: %d\n", ret);
goto err;
}
ret = regmap_update_bits(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1,
ARIZONA_HP_POLL, ARIZONA_HP_POLL);
if (ret != 0) {
dev_err(arizona->dev, "Can't start HPDETL measurement: %d\n",
ret);
goto err;
}
return;
err:
regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1,
ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
/* Just report headphone */
ret = extcon_update_state(&info->edev,
1 << ARIZONA_CABLE_HEADPHONE,
1 << ARIZONA_CABLE_HEADPHONE);
if (ret != 0)
dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
if (info->mic)
arizona_start_mic(info);
info->hpdet_active = false;
}
static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info)
{
struct arizona *arizona = info->arizona;
unsigned int val;
int ret;
dev_dbg(arizona->dev, "Starting identification via HPDET\n");
/* Make sure we keep the device enabled during the measurement */
pm_runtime_get_sync(info->dev);
info->hpdet_active = true;
arizona_extcon_pulse_micbias(info);
mutex_lock(&arizona->dapm->card->dapm_mutex);
ret = regmap_read(arizona->regmap, ARIZONA_OUTPUT_ENABLES_1, &val);
if (ret != 0) {
dev_err(arizona->dev, "Failed to read output enables: %d\n",
ret);
val = 0;
}
if (!(val & (ARIZONA_OUT1L_ENA | ARIZONA_OUT1R_ENA))) {
ret = regmap_update_bits(arizona->regmap, 0x225, 0x4000,
0x4000);
if (ret != 0)
dev_warn(arizona->dev, "Failed to do magic: %d\n",
ret);
ret = regmap_update_bits(arizona->regmap, 0x226, 0x4000,
0x4000);
if (ret != 0)
dev_warn(arizona->dev, "Failed to do magic: %d\n",
ret);
}
mutex_unlock(&arizona->dapm->card->dapm_mutex);
ret = regmap_update_bits(arizona->regmap,
ARIZONA_ACCESSORY_DETECT_MODE_1,
ARIZONA_ACCDET_SRC | ARIZONA_ACCDET_MODE_MASK,
info->micd_modes[0].src |
ARIZONA_ACCDET_MODE_HPL);
if (ret != 0) {
dev_err(arizona->dev, "Failed to set HPDETL mode: %d\n", ret);
goto err;
}
ret = regmap_update_bits(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1,
ARIZONA_HP_POLL, ARIZONA_HP_POLL);
if (ret != 0) {
dev_err(arizona->dev, "Can't start HPDETL measurement: %d\n",
ret);
goto err;
}
return;
err:
regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1,
ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
/* Just report headphone */
ret = extcon_update_state(&info->edev,
1 << ARIZONA_CABLE_HEADPHONE,
1 << ARIZONA_CABLE_HEADPHONE);
if (ret != 0)
dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
info->hpdet_active = false;
}
static irqreturn_t arizona_micdet(int irq, void *data)
{
struct arizona_extcon_info *info = data;
struct arizona *arizona = info->arizona;
unsigned int val, lvl;
int ret, i;
mutex_lock(&info->lock);
ret = regmap_read(arizona->regmap, ARIZONA_MIC_DETECT_3, &val);
if (ret != 0) {
dev_err(arizona->dev, "Failed to read MICDET: %d\n", ret);
mutex_unlock(&info->lock);
return IRQ_NONE;
}
dev_dbg(arizona->dev, "MICDET: %x\n", val);
if (!(val & ARIZONA_MICD_VALID)) {
dev_warn(arizona->dev, "Microphone detection state invalid\n");
mutex_unlock(&info->lock);
return IRQ_NONE;
}
/* Due to jack detect this should never happen */
if (!(val & ARIZONA_MICD_STS)) {
dev_warn(arizona->dev, "Detected open circuit\n");
info->detecting = false;
goto handled;
}
/* If we got a high impedence we should have a headset, report it. */
if (info->detecting && (val & 0x400)) {
arizona_identify_headphone(info);
ret = extcon_update_state(&info->edev,
1 << ARIZONA_CABLE_MICROPHONE,
1 << ARIZONA_CABLE_MICROPHONE);
if (ret != 0)
dev_err(arizona->dev, "Headset report failed: %d\n",
ret);
/* Don't need to regulate for button detection */
ret = regulator_allow_bypass(info->micvdd, false);
if (ret != 0) {
dev_err(arizona->dev, "Failed to bypass MICVDD: %d\n",
ret);
}
info->mic = true;
info->detecting = false;
goto handled;
}
/* If we detected a lower impedence during initial startup
* then we probably have the wrong polarity, flip it. Don't
* do this for the lowest impedences to speed up detection of
* plain headphones. If both polarities report a low
* impedence then give up and report headphones.
*/
if (info->detecting && (val & 0x3f8)) {
if (info->jack_flips >= info->micd_num_modes) {
dev_dbg(arizona->dev, "Detected HP/line\n");
arizona_identify_headphone(info);
info->detecting = false;
arizona_stop_mic(info);
} else {
info->micd_mode++;
if (info->micd_mode == info->micd_num_modes)
info->micd_mode = 0;
arizona_extcon_set_mode(info, info->micd_mode);
info->jack_flips++;
}
goto handled;
}
/*
* If we're still detecting and we detect a short then we've
* got a headphone. Otherwise it's a button press.
*/
if (val & 0x3fc) {
if (info->mic) {
dev_dbg(arizona->dev, "Mic button detected\n");
lvl = val & ARIZONA_MICD_LVL_MASK;
lvl >>= ARIZONA_MICD_LVL_SHIFT;
for (i = 0; i < ARIZONA_NUM_BUTTONS; i++)
if (lvl & arizona_lvl_to_key[i].status)
input_report_key(info->input,
arizona_lvl_to_key[i].report,
1);
input_sync(info->input);
} else if (info->detecting) {
dev_dbg(arizona->dev, "Headphone detected\n");
info->detecting = false;
arizona_stop_mic(info);
arizona_identify_headphone(info);
} else {
dev_warn(arizona->dev, "Button with no mic: %x\n",
val);
}
} else {
dev_dbg(arizona->dev, "Mic button released\n");
for (i = 0; i < ARIZONA_NUM_BUTTONS; i++)
input_report_key(info->input,
arizona_lvl_to_key[i].report, 0);
input_sync(info->input);
arizona_extcon_pulse_micbias(info);
}
handled:
pm_runtime_mark_last_busy(info->dev);
mutex_unlock(&info->lock);
return IRQ_HANDLED;
}
static void arizona_hpdet_work(struct work_struct *work)
{
struct arizona_extcon_info *info = container_of(work,
struct arizona_extcon_info,
hpdet_work.work);
mutex_lock(&info->lock);
arizona_start_hpdet_acc_id(info);
mutex_unlock(&info->lock);
}
static irqreturn_t arizona_jackdet(int irq, void *data)
{
struct arizona_extcon_info *info = data;
struct arizona *arizona = info->arizona;
unsigned int val, present, mask;
int ret, i;
pm_runtime_get_sync(info->dev);
cancel_delayed_work_sync(&info->hpdet_work);
mutex_lock(&info->lock);
if (arizona->pdata.jd_gpio5) {
mask = ARIZONA_MICD_CLAMP_STS;
present = 0;
} else {
mask = ARIZONA_JD1_STS;
present = ARIZONA_JD1_STS;
}
ret = regmap_read(arizona->regmap, ARIZONA_AOD_IRQ_RAW_STATUS, &val);
if (ret != 0) {
dev_err(arizona->dev, "Failed to read jackdet status: %d\n",
ret);
mutex_unlock(&info->lock);
pm_runtime_put_autosuspend(info->dev);
return IRQ_NONE;
}
if ((val & mask) == present) {
dev_dbg(arizona->dev, "Detected jack\n");
ret = extcon_set_cable_state_(&info->edev,
ARIZONA_CABLE_MECHANICAL, true);
if (ret != 0)
dev_err(arizona->dev, "Mechanical report failed: %d\n",
ret);
if (!arizona->pdata.hpdet_acc_id) {
info->detecting = true;
info->mic = false;
info->jack_flips = 0;
arizona_start_mic(info);
} else {
schedule_delayed_work(&info->hpdet_work,
msecs_to_jiffies(250));
}
regmap_update_bits(arizona->regmap,
ARIZONA_JACK_DETECT_DEBOUNCE,
ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB, 0);
} else {
dev_dbg(arizona->dev, "Detected jack removal\n");
arizona_stop_mic(info);
info->num_hpdet_res = 0;
for (i = 0; i < ARRAY_SIZE(info->hpdet_res); i++)
info->hpdet_res[i] = 0;
info->mic = false;
info->hpdet_done = false;
for (i = 0; i < ARIZONA_NUM_BUTTONS; i++)
input_report_key(info->input,
arizona_lvl_to_key[i].report, 0);
input_sync(info->input);
ret = extcon_update_state(&info->edev, 0xffffffff, 0);
if (ret != 0)
dev_err(arizona->dev, "Removal report failed: %d\n",
ret);
regmap_update_bits(arizona->regmap,
ARIZONA_JACK_DETECT_DEBOUNCE,
ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB,
ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB);
}
/* Clear trig_sts to make sure DCVDD is not forced up */
regmap_write(arizona->regmap, ARIZONA_AOD_WKUP_AND_TRIG,
ARIZONA_MICD_CLAMP_FALL_TRIG_STS |
ARIZONA_MICD_CLAMP_RISE_TRIG_STS |
ARIZONA_JD1_FALL_TRIG_STS |
ARIZONA_JD1_RISE_TRIG_STS);
mutex_unlock(&info->lock);
pm_runtime_mark_last_busy(info->dev);
pm_runtime_put_autosuspend(info->dev);
return IRQ_HANDLED;
}
static int arizona_extcon_probe(struct platform_device *pdev)
{
struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
struct arizona_pdata *pdata;
struct arizona_extcon_info *info;
int jack_irq_fall, jack_irq_rise;
int ret, mode, i;
if (!arizona->dapm || !arizona->dapm->card)
return -EPROBE_DEFER;
pdata = dev_get_platdata(arizona->dev);
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
if (!info) {
dev_err(&pdev->dev, "Failed to allocate memory\n");
ret = -ENOMEM;
goto err;
}
info->micvdd = devm_regulator_get(arizona->dev, "MICVDD");
if (IS_ERR(info->micvdd)) {
ret = PTR_ERR(info->micvdd);
dev_err(arizona->dev, "Failed to get MICVDD: %d\n", ret);
goto err;
}
mutex_init(&info->lock);
info->arizona = arizona;
info->dev = &pdev->dev;
INIT_DELAYED_WORK(&info->hpdet_work, arizona_hpdet_work);
platform_set_drvdata(pdev, info);
switch (arizona->type) {
case WM5102:
switch (arizona->rev) {
case 0:
info->micd_reva = true;
break;
default:
info->micd_clamp = true;
info->hpdet_ip = 1;
break;
}
break;
default:
break;
}
info->edev.name = "Headset Jack";
info->edev.supported_cable = arizona_cable;
ret = extcon_dev_register(&info->edev, arizona->dev);
if (ret < 0) {
dev_err(arizona->dev, "extcon_dev_register() failed: %d\n",
ret);
goto err;
}
if (pdata->num_micd_configs) {
info->micd_modes = pdata->micd_configs;
info->micd_num_modes = pdata->num_micd_configs;
} else {
info->micd_modes = micd_default_modes;
info->micd_num_modes = ARRAY_SIZE(micd_default_modes);
}
if (arizona->pdata.micd_pol_gpio > 0) {
if (info->micd_modes[0].gpio)
mode = GPIOF_OUT_INIT_HIGH;
else
mode = GPIOF_OUT_INIT_LOW;
ret = devm_gpio_request_one(&pdev->dev,
arizona->pdata.micd_pol_gpio,
mode,
"MICD polarity");
if (ret != 0) {
dev_err(arizona->dev, "Failed to request GPIO%d: %d\n",
arizona->pdata.micd_pol_gpio, ret);
goto err_register;
}
}
if (arizona->pdata.hpdet_id_gpio > 0) {
ret = devm_gpio_request_one(&pdev->dev,
arizona->pdata.hpdet_id_gpio,
GPIOF_OUT_INIT_LOW,
"HPDET");
if (ret != 0) {
dev_err(arizona->dev, "Failed to request GPIO%d: %d\n",
arizona->pdata.hpdet_id_gpio, ret);
goto err_register;
}
}
if (arizona->pdata.micd_bias_start_time)
regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
ARIZONA_MICD_BIAS_STARTTIME_MASK,
arizona->pdata.micd_bias_start_time
<< ARIZONA_MICD_BIAS_STARTTIME_SHIFT);
if (arizona->pdata.micd_rate)
regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
ARIZONA_MICD_RATE_MASK,
arizona->pdata.micd_rate
<< ARIZONA_MICD_RATE_SHIFT);
if (arizona->pdata.micd_dbtime)
regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
ARIZONA_MICD_DBTIME_MASK,
arizona->pdata.micd_dbtime
<< ARIZONA_MICD_DBTIME_SHIFT);
/*
* If we have a clamp use it, activating in conjunction with
* GPIO5 if that is connected for jack detect operation.
*/
if (info->micd_clamp) {
if (arizona->pdata.jd_gpio5) {
/* Put the GPIO into input mode */
regmap_write(arizona->regmap, ARIZONA_GPIO5_CTRL,
0xc101);
regmap_update_bits(arizona->regmap,
ARIZONA_MICD_CLAMP_CONTROL,
ARIZONA_MICD_CLAMP_MODE_MASK, 0x9);
} else {
regmap_update_bits(arizona->regmap,
ARIZONA_MICD_CLAMP_CONTROL,
ARIZONA_MICD_CLAMP_MODE_MASK, 0x4);
}
regmap_update_bits(arizona->regmap,
ARIZONA_JACK_DETECT_DEBOUNCE,
ARIZONA_MICD_CLAMP_DB,
ARIZONA_MICD_CLAMP_DB);
}
arizona_extcon_set_mode(info, 0);
info->input = devm_input_allocate_device(&pdev->dev);
if (!info->input) {
dev_err(arizona->dev, "Can't allocate input dev\n");
ret = -ENOMEM;
goto err_register;
}
for (i = 0; i < ARIZONA_NUM_BUTTONS; i++)
input_set_capability(info->input, EV_KEY,
arizona_lvl_to_key[i].report);
info->input->name = "Headset";
info->input->phys = "arizona/extcon";
info->input->dev.parent = &pdev->dev;
pm_runtime_enable(&pdev->dev);
pm_runtime_idle(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
if (arizona->pdata.jd_gpio5) {
jack_irq_rise = ARIZONA_IRQ_MICD_CLAMP_RISE;
jack_irq_fall = ARIZONA_IRQ_MICD_CLAMP_FALL;
} else {
jack_irq_rise = ARIZONA_IRQ_JD_RISE;
jack_irq_fall = ARIZONA_IRQ_JD_FALL;
}
ret = arizona_request_irq(arizona, jack_irq_rise,
"JACKDET rise", arizona_jackdet, info);
if (ret != 0) {
dev_err(&pdev->dev, "Failed to get JACKDET rise IRQ: %d\n",
ret);
goto err_input;
}
ret = arizona_set_irq_wake(arizona, jack_irq_rise, 1);
if (ret != 0) {
dev_err(&pdev->dev, "Failed to set JD rise IRQ wake: %d\n",
ret);
goto err_rise;
}
ret = arizona_request_irq(arizona, jack_irq_fall,
"JACKDET fall", arizona_jackdet, info);
if (ret != 0) {
dev_err(&pdev->dev, "Failed to get JD fall IRQ: %d\n", ret);
goto err_rise_wake;
}
ret = arizona_set_irq_wake(arizona, jack_irq_fall, 1);
if (ret != 0) {
dev_err(&pdev->dev, "Failed to set JD fall IRQ wake: %d\n",
ret);
goto err_fall;
}
ret = arizona_request_irq(arizona, ARIZONA_IRQ_MICDET,
"MICDET", arizona_micdet, info);
if (ret != 0) {
dev_err(&pdev->dev, "Failed to get MICDET IRQ: %d\n", ret);
goto err_fall_wake;
}
ret = arizona_request_irq(arizona, ARIZONA_IRQ_HPDET,
"HPDET", arizona_hpdet_irq, info);
if (ret != 0) {
dev_err(&pdev->dev, "Failed to get HPDET IRQ: %d\n", ret);
goto err_micdet;
}
arizona_clk32k_enable(arizona);
regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_DEBOUNCE,
ARIZONA_JD1_DB, ARIZONA_JD1_DB);
regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE,
ARIZONA_JD1_ENA, ARIZONA_JD1_ENA);
ret = regulator_allow_bypass(info->micvdd, true);
if (ret != 0)
dev_warn(arizona->dev, "Failed to set MICVDD to bypass: %d\n",
ret);
pm_runtime_put(&pdev->dev);
ret = input_register_device(info->input);
if (ret) {
dev_err(&pdev->dev, "Can't register input device: %d\n", ret);
goto err_hpdet;
}
return 0;
err_hpdet:
arizona_free_irq(arizona, ARIZONA_IRQ_HPDET, info);
err_micdet:
arizona_free_irq(arizona, ARIZONA_IRQ_MICDET, info);
err_fall_wake:
arizona_set_irq_wake(arizona, jack_irq_fall, 0);
err_fall:
arizona_free_irq(arizona, jack_irq_fall, info);
err_rise_wake:
arizona_set_irq_wake(arizona, jack_irq_rise, 0);
err_rise:
arizona_free_irq(arizona, jack_irq_rise, info);
err_input:
err_register:
pm_runtime_disable(&pdev->dev);
extcon_dev_unregister(&info->edev);
err:
return ret;
}
static int arizona_extcon_remove(struct platform_device *pdev)
{
struct arizona_extcon_info *info = platform_get_drvdata(pdev);
struct arizona *arizona = info->arizona;
int jack_irq_rise, jack_irq_fall;
pm_runtime_disable(&pdev->dev);
regmap_update_bits(arizona->regmap,
ARIZONA_MICD_CLAMP_CONTROL,
ARIZONA_MICD_CLAMP_MODE_MASK, 0);
if (arizona->pdata.jd_gpio5) {
jack_irq_rise = ARIZONA_IRQ_MICD_CLAMP_RISE;
jack_irq_fall = ARIZONA_IRQ_MICD_CLAMP_FALL;
} else {
jack_irq_rise = ARIZONA_IRQ_JD_RISE;
jack_irq_fall = ARIZONA_IRQ_JD_FALL;
}
arizona_set_irq_wake(arizona, jack_irq_rise, 0);
arizona_set_irq_wake(arizona, jack_irq_fall, 0);
arizona_free_irq(arizona, ARIZONA_IRQ_HPDET, info);
arizona_free_irq(arizona, ARIZONA_IRQ_MICDET, info);
arizona_free_irq(arizona, jack_irq_rise, info);
arizona_free_irq(arizona, jack_irq_fall, info);
cancel_delayed_work_sync(&info->hpdet_work);
regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE,
ARIZONA_JD1_ENA, 0);
arizona_clk32k_disable(arizona);
extcon_dev_unregister(&info->edev);
return 0;
}
static struct platform_driver arizona_extcon_driver = {
.driver = {
.name = "arizona-extcon",
.owner = THIS_MODULE,
},
.probe = arizona_extcon_probe,
.remove = arizona_extcon_remove,
};
module_platform_driver(arizona_extcon_driver);
MODULE_DESCRIPTION("Arizona Extcon driver");
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:extcon-arizona");