271 lines
7.0 KiB
C
271 lines
7.0 KiB
C
/*
|
|
* pata_opti.c - ATI PATA for new ATA layer
|
|
* (C) 2005 Red Hat Inc
|
|
* Alan Cox <alan@redhat.com>
|
|
*
|
|
* Based on
|
|
* linux/drivers/ide/pci/opti621.c Version 0.7 Sept 10, 2002
|
|
*
|
|
* Copyright (C) 1996-1998 Linus Torvalds & authors (see below)
|
|
*
|
|
* Authors:
|
|
* Jaromir Koutek <miri@punknet.cz>,
|
|
* Jan Harkes <jaharkes@cwi.nl>,
|
|
* Mark Lord <mlord@pobox.com>
|
|
* Some parts of code are from ali14xx.c and from rz1000.c.
|
|
*
|
|
* Also consulted the FreeBSD prototype driver by Kevin Day to try
|
|
* and resolve some confusions. Further documentation can be found in
|
|
* Ralf Brown's interrupt list
|
|
*
|
|
* If you have other variants of the Opti range (Viper/Vendetta) please
|
|
* try this driver with those PCI idents and report back. For the later
|
|
* chips see the pata_optidma driver
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
|
|
#define DRV_NAME "pata_opti"
|
|
#define DRV_VERSION "0.2.9"
|
|
|
|
enum {
|
|
READ_REG = 0, /* index of Read cycle timing register */
|
|
WRITE_REG = 1, /* index of Write cycle timing register */
|
|
CNTRL_REG = 3, /* index of Control register */
|
|
STRAP_REG = 5, /* index of Strap register */
|
|
MISC_REG = 6 /* index of Miscellaneous register */
|
|
};
|
|
|
|
/**
|
|
* opti_pre_reset - probe begin
|
|
* @ap: ATA port
|
|
* @deadline: deadline jiffies for the operation
|
|
*
|
|
* Set up cable type and use generic probe init
|
|
*/
|
|
|
|
static int opti_pre_reset(struct ata_port *ap, unsigned long deadline)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
static const struct pci_bits opti_enable_bits[] = {
|
|
{ 0x45, 1, 0x80, 0x00 },
|
|
{ 0x40, 1, 0x08, 0x00 }
|
|
};
|
|
|
|
if (!pci_test_config_bits(pdev, &opti_enable_bits[ap->port_no]))
|
|
return -ENOENT;
|
|
|
|
return ata_std_prereset(ap, deadline);
|
|
}
|
|
|
|
/**
|
|
* opti_probe_reset - probe reset
|
|
* @ap: ATA port
|
|
*
|
|
* Perform the ATA probe and bus reset sequence plus specific handling
|
|
* for this hardware. The Opti needs little handling - we have no UDMA66
|
|
* capability that needs cable detection. All we must do is check the port
|
|
* is enabled.
|
|
*/
|
|
|
|
static void opti_error_handler(struct ata_port *ap)
|
|
{
|
|
ata_bmdma_drive_eh(ap, opti_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
|
|
}
|
|
|
|
/**
|
|
* opti_write_reg - control register setup
|
|
* @ap: ATA port
|
|
* @value: value
|
|
* @reg: control register number
|
|
*
|
|
* The Opti uses magic 'trapdoor' register accesses to do configuration
|
|
* rather than using PCI space as other controllers do. The double inw
|
|
* on the error register activates configuration mode. We can then write
|
|
* the control register
|
|
*/
|
|
|
|
static void opti_write_reg(struct ata_port *ap, u8 val, int reg)
|
|
{
|
|
void __iomem *regio = ap->ioaddr.cmd_addr;
|
|
|
|
/* These 3 unlock the control register access */
|
|
ioread16(regio + 1);
|
|
ioread16(regio + 1);
|
|
iowrite8(3, regio + 2);
|
|
|
|
/* Do the I/O */
|
|
iowrite8(val, regio + reg);
|
|
|
|
/* Relock */
|
|
iowrite8(0x83, regio + 2);
|
|
}
|
|
|
|
/**
|
|
* opti_set_piomode - set initial PIO mode data
|
|
* @ap: ATA interface
|
|
* @adev: ATA device
|
|
*
|
|
* Called to do the PIO mode setup. Timing numbers are taken from
|
|
* the FreeBSD driver then pre computed to keep the code clean. There
|
|
* are two tables depending on the hardware clock speed.
|
|
*/
|
|
|
|
static void opti_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
struct ata_device *pair = ata_dev_pair(adev);
|
|
int clock;
|
|
int pio = adev->pio_mode - XFER_PIO_0;
|
|
void __iomem *regio = ap->ioaddr.cmd_addr;
|
|
u8 addr;
|
|
|
|
/* Address table precomputed with prefetch off and a DCLK of 2 */
|
|
static const u8 addr_timing[2][5] = {
|
|
{ 0x30, 0x20, 0x20, 0x10, 0x10 },
|
|
{ 0x20, 0x20, 0x10, 0x10, 0x10 }
|
|
};
|
|
static const u8 data_rec_timing[2][5] = {
|
|
{ 0x6B, 0x56, 0x42, 0x32, 0x31 },
|
|
{ 0x58, 0x44, 0x32, 0x22, 0x21 }
|
|
};
|
|
|
|
iowrite8(0xff, regio + 5);
|
|
clock = ioread16(regio + 5) & 1;
|
|
|
|
/*
|
|
* As with many controllers the address setup time is shared
|
|
* and must suit both devices if present.
|
|
*/
|
|
|
|
addr = addr_timing[clock][pio];
|
|
if (pair) {
|
|
/* Hardware constraint */
|
|
u8 pair_addr = addr_timing[clock][pair->pio_mode - XFER_PIO_0];
|
|
if (pair_addr > addr)
|
|
addr = pair_addr;
|
|
}
|
|
|
|
/* Commence primary programming sequence */
|
|
opti_write_reg(ap, adev->devno, MISC_REG);
|
|
opti_write_reg(ap, data_rec_timing[clock][pio], READ_REG);
|
|
opti_write_reg(ap, data_rec_timing[clock][pio], WRITE_REG);
|
|
opti_write_reg(ap, addr, MISC_REG);
|
|
|
|
/* Programming sequence complete, override strapping */
|
|
opti_write_reg(ap, 0x85, CNTRL_REG);
|
|
}
|
|
|
|
static struct scsi_host_template opti_sht = {
|
|
.module = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
.ioctl = ata_scsi_ioctl,
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
.can_queue = ATA_DEF_QUEUE,
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
.sg_tablesize = LIBATA_MAX_PRD,
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
.emulated = ATA_SHT_EMULATED,
|
|
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
.proc_name = DRV_NAME,
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
.slave_configure = ata_scsi_slave_config,
|
|
.slave_destroy = ata_scsi_slave_destroy,
|
|
.bios_param = ata_std_bios_param,
|
|
};
|
|
|
|
static struct ata_port_operations opti_port_ops = {
|
|
.port_disable = ata_port_disable,
|
|
.set_piomode = opti_set_piomode,
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = ata_exec_command,
|
|
.dev_select = ata_std_dev_select,
|
|
|
|
.freeze = ata_bmdma_freeze,
|
|
.thaw = ata_bmdma_thaw,
|
|
.error_handler = opti_error_handler,
|
|
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
|
.cable_detect = ata_cable_40wire,
|
|
|
|
.bmdma_setup = ata_bmdma_setup,
|
|
.bmdma_start = ata_bmdma_start,
|
|
.bmdma_stop = ata_bmdma_stop,
|
|
.bmdma_status = ata_bmdma_status,
|
|
|
|
.qc_prep = ata_qc_prep,
|
|
.qc_issue = ata_qc_issue_prot,
|
|
|
|
.data_xfer = ata_data_xfer,
|
|
|
|
.irq_handler = ata_interrupt,
|
|
.irq_clear = ata_bmdma_irq_clear,
|
|
.irq_on = ata_irq_on,
|
|
.irq_ack = ata_irq_ack,
|
|
|
|
.port_start = ata_port_start,
|
|
};
|
|
|
|
static int opti_init_one(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
static const struct ata_port_info info = {
|
|
.sht = &opti_sht,
|
|
.flags = ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = 0x1f,
|
|
.port_ops = &opti_port_ops
|
|
};
|
|
const struct ata_port_info *ppi[] = { &info, NULL };
|
|
static int printed_version;
|
|
|
|
if (!printed_version++)
|
|
dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
|
|
|
|
return ata_pci_init_one(dev, ppi);
|
|
}
|
|
|
|
static const struct pci_device_id opti[] = {
|
|
{ PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C621), 0 },
|
|
{ PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C825), 1 },
|
|
|
|
{ },
|
|
};
|
|
|
|
static struct pci_driver opti_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = opti,
|
|
.probe = opti_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
#ifdef CONFIG_PM
|
|
.suspend = ata_pci_device_suspend,
|
|
.resume = ata_pci_device_resume,
|
|
#endif
|
|
};
|
|
|
|
static int __init opti_init(void)
|
|
{
|
|
return pci_register_driver(&opti_pci_driver);
|
|
}
|
|
|
|
static void __exit opti_exit(void)
|
|
{
|
|
pci_unregister_driver(&opti_pci_driver);
|
|
}
|
|
|
|
|
|
MODULE_AUTHOR("Alan Cox");
|
|
MODULE_DESCRIPTION("low-level driver for Opti 621/621X");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, opti);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
module_init(opti_init);
|
|
module_exit(opti_exit);
|