229 lines
7.9 KiB
YAML
229 lines
7.9 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-only
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/leds/common.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Common leds properties
|
|
|
|
maintainers:
|
|
- Jacek Anaszewski <jacek.anaszewski@gmail.com>
|
|
- Pavel Machek <pavel@ucw.cz>
|
|
|
|
description:
|
|
LED and flash LED devices provide the same basic functionality as current
|
|
regulators, but extended with LED and flash LED specific features like
|
|
blinking patterns, flash timeout, flash faults and external flash strobe mode.
|
|
|
|
Many LED devices expose more than one current output that can be connected
|
|
to one or more discrete LED component. Since the arrangement of connections
|
|
can influence the way of the LED device initialization, the LED components
|
|
have to be tightly coupled with the LED device binding. They are represented
|
|
by child nodes of the parent LED device binding.
|
|
|
|
properties:
|
|
led-sources:
|
|
description:
|
|
List of device current outputs the LED is connected to. The outputs are
|
|
identified by the numbers that must be defined in the LED device binding
|
|
documentation.
|
|
$ref: /schemas/types.yaml#definitions/uint32-array
|
|
|
|
function:
|
|
description:
|
|
LED function. Use one of the LED_FUNCTION_* prefixed definitions
|
|
from the header include/dt-bindings/leds/common.h. If there is no
|
|
matching LED_FUNCTION available, add a new one.
|
|
$ref: /schemas/types.yaml#definitions/string
|
|
|
|
color:
|
|
description:
|
|
Color of the LED. Use one of the LED_COLOR_ID_* prefixed definitions from
|
|
the header include/dt-bindings/leds/common.h. If there is no matching
|
|
LED_COLOR_ID available, add a new one.
|
|
allOf:
|
|
- $ref: /schemas/types.yaml#definitions/uint32
|
|
minimum: 0
|
|
maximum: 8
|
|
|
|
function-enumerator:
|
|
description:
|
|
Integer to be used when more than one instance of the same function is
|
|
needed, differing only with an ordinal number.
|
|
$ref: /schemas/types.yaml#definitions/uint32
|
|
|
|
label:
|
|
description:
|
|
The label for this LED. If omitted, the label is taken from the node name
|
|
(excluding the unit address). It has to uniquely identify a device, i.e.
|
|
no other LED class device can be assigned the same label. This property is
|
|
deprecated - use 'function' and 'color' properties instead.
|
|
function-enumerator has no effect when this property is present.
|
|
|
|
default-state:
|
|
description:
|
|
The initial state of the LED. If the LED is already on or off and the
|
|
default-state property is set the to same value, then no glitch should be
|
|
produced where the LED momentarily turns off (or on). The "keep" setting
|
|
will keep the LED at whatever its current state is, without producing a
|
|
glitch.
|
|
allOf:
|
|
- $ref: /schemas/types.yaml#definitions/string
|
|
enum:
|
|
- on
|
|
- off
|
|
- keep
|
|
default: off
|
|
|
|
linux,default-trigger:
|
|
description:
|
|
This parameter, if present, is a string defining the trigger assigned to
|
|
the LED.
|
|
allOf:
|
|
- $ref: /schemas/types.yaml#definitions/string
|
|
enum:
|
|
# LED will act as a back-light, controlled by the framebuffer system
|
|
- backlight
|
|
# LED will turn on (but for leds-gpio see "default-state" property in
|
|
# Documentation/devicetree/bindings/leds/leds-gpio.yaml)
|
|
- default-on
|
|
# LED "double" flashes at a load average based rate
|
|
- heartbeat
|
|
# LED indicates disk activity
|
|
- disk-activity
|
|
# LED indicates IDE disk activity (deprecated), in new implementations
|
|
# use "disk-activity"
|
|
- ide-disk
|
|
# LED flashes at a fixed, configurable rate
|
|
- timer
|
|
# LED alters the brightness for the specified duration with one software
|
|
# timer (requires "led-pattern" property)
|
|
- pattern
|
|
|
|
led-pattern:
|
|
description: |
|
|
Array of integers with default pattern for certain triggers.
|
|
|
|
Each trigger may parse this property differently:
|
|
- one-shot : two numbers specifying delay on and delay off (in ms),
|
|
- timer : two numbers specifying delay on and delay off (in ms),
|
|
- pattern : the pattern is given by a series of tuples, of
|
|
brightness and duration (in ms). The exact format is
|
|
described in:
|
|
Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt
|
|
allOf:
|
|
- $ref: /schemas/types.yaml#definitions/uint32-matrix
|
|
items:
|
|
minItems: 2
|
|
maxItems: 2
|
|
|
|
led-max-microamp:
|
|
description:
|
|
Maximum LED supply current in microamperes. This property can be made
|
|
mandatory for the board configurations introducing a risk of hardware
|
|
damage in case an excessive current is set.
|
|
For flash LED controllers with configurable current this property is
|
|
mandatory for the LEDs in the non-flash modes (e.g. torch or indicator).
|
|
|
|
panic-indicator:
|
|
description:
|
|
This property specifies that the LED should be used, if at all possible,
|
|
as a panic indicator.
|
|
type: boolean
|
|
|
|
trigger-sources:
|
|
description: |
|
|
List of devices which should be used as a source triggering this LED
|
|
activity. Some LEDs can be related to a specific device and should somehow
|
|
indicate its state. E.g. USB 2.0 LED may react to device(s) in a USB 2.0
|
|
port(s).
|
|
Another common example is switch or router with multiple Ethernet ports
|
|
each of them having its own LED assigned (assuming they are not
|
|
hardwired). In such cases this property should contain phandle(s) of
|
|
related source device(s).
|
|
In many cases LED can be related to more than one device (e.g. one USB LED
|
|
vs. multiple USB ports). Each source should be represented by a node in
|
|
the device tree and be referenced by a phandle and a set of phandle
|
|
arguments. A length of arguments should be specified by the
|
|
#trigger-source-cells property in the source node.
|
|
$ref: /schemas/types.yaml#definitions/phandle-array
|
|
|
|
# Required properties for flash LED child nodes:
|
|
flash-max-microamp:
|
|
description:
|
|
Maximum flash LED supply current in microamperes. Required for flash LED
|
|
nodes with configurable current.
|
|
|
|
flash-max-timeout-us:
|
|
description:
|
|
Maximum timeout in microseconds after which the flash LED is turned off.
|
|
Required for flash LED nodes with configurable timeout.
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
led-controller {
|
|
compatible = "gpio-leds";
|
|
|
|
led-0 {
|
|
function = LED_FUNCTION_STATUS;
|
|
linux,default-trigger = "heartbeat";
|
|
gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
led-1 {
|
|
function = LED_FUNCTION_USB;
|
|
gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
|
|
trigger-sources = <&ohci_port1>, <&ehci_port1>;
|
|
};
|
|
};
|
|
|
|
led-controller@0 {
|
|
compatible = "maxim,max77693-led";
|
|
reg = <0 0x100>;
|
|
|
|
led {
|
|
function = LED_FUNCTION_FLASH;
|
|
color = <LED_COLOR_ID_WHITE>;
|
|
led-sources = <0>, <1>;
|
|
led-max-microamp = <50000>;
|
|
flash-max-microamp = <320000>;
|
|
flash-max-timeout-us = <500000>;
|
|
};
|
|
};
|
|
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
led-controller@30 {
|
|
compatible = "panasonic,an30259a";
|
|
reg = <0x30>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
led@1 {
|
|
reg = <1>;
|
|
linux,default-trigger = "heartbeat";
|
|
function = LED_FUNCTION_INDICATOR;
|
|
function-enumerator = <1>;
|
|
};
|
|
|
|
led@2 {
|
|
reg = <2>;
|
|
function = LED_FUNCTION_INDICATOR;
|
|
function-enumerator = <2>;
|
|
};
|
|
|
|
led@3 {
|
|
reg = <3>;
|
|
function = LED_FUNCTION_INDICATOR;
|
|
function-enumerator = <3>;
|
|
};
|
|
};
|
|
};
|
|
|
|
...
|