hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
linux-sg2042/drivers/ata/sata_highbank.c

441 lines
12 KiB
C
Raw Blame History

/*
* Calxeda Highbank AHCI SATA platform driver
* Copyright 2012 Calxeda, Inc.
*
* based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/kernel.h>
#include <linux/gfp.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/spinlock.h>
#include <linux/device.h>
#include <linux/of_device.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/libata.h>
#include <linux/ahci_platform.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/export.h>
#include "ahci.h"
#define CPHY_MAP(dev, addr) ((((dev) & 0x1f) << 7) | (((addr) >> 9) & 0x7f))
#define CPHY_ADDR(addr) (((addr) & 0x1ff) << 2)
#define SERDES_CR_CTL 0x80a0
#define SERDES_CR_ADDR 0x80a1
#define SERDES_CR_DATA 0x80a2
#define CR_BUSY 0x0001
#define CR_START 0x0001
#define CR_WR_RDN 0x0002
#define CPHY_RX_INPUT_STS 0x2002
#define CPHY_SATA_OVERRIDE 0x4000
#define CPHY_OVERRIDE 0x2005
#define SPHY_LANE 0x100
#define SPHY_HALF_RATE 0x0001
#define CPHY_SATA_DPLL_MODE 0x0700
#define CPHY_SATA_DPLL_SHIFT 8
#define CPHY_SATA_DPLL_RESET (1 << 11)
#define CPHY_PHY_COUNT 6
#define CPHY_LANE_COUNT 4
#define CPHY_PORT_COUNT (CPHY_PHY_COUNT * CPHY_LANE_COUNT)
static DEFINE_SPINLOCK(cphy_lock);
/* Each of the 6 phys can have up to 4 sata ports attached to i. Map 0-based
* sata ports to their phys and then to their lanes within the phys
*/
struct phy_lane_info {
void __iomem *phy_base;
u8 lane_mapping;
u8 phy_devs;
};
static struct phy_lane_info port_data[CPHY_PORT_COUNT];
static u32 __combo_phy_reg_read(u8 sata_port, u32 addr)
{
u32 data;
u8 dev = port_data[sata_port].phy_devs;
spin_lock(&cphy_lock);
writel(CPHY_MAP(dev, addr), port_data[sata_port].phy_base + 0x800);
data = readl(port_data[sata_port].phy_base + CPHY_ADDR(addr));
spin_unlock(&cphy_lock);
return data;
}
static void __combo_phy_reg_write(u8 sata_port, u32 addr, u32 data)
{
u8 dev = port_data[sata_port].phy_devs;
spin_lock(&cphy_lock);
writel(CPHY_MAP(dev, addr), port_data[sata_port].phy_base + 0x800);
writel(data, port_data[sata_port].phy_base + CPHY_ADDR(addr));
spin_unlock(&cphy_lock);
}
static void combo_phy_wait_for_ready(u8 sata_port)
{
while (__combo_phy_reg_read(sata_port, SERDES_CR_CTL) & CR_BUSY)
udelay(5);
}
static u32 combo_phy_read(u8 sata_port, u32 addr)
{
combo_phy_wait_for_ready(sata_port);
__combo_phy_reg_write(sata_port, SERDES_CR_ADDR, addr);
__combo_phy_reg_write(sata_port, SERDES_CR_CTL, CR_START);
combo_phy_wait_for_ready(sata_port);
return __combo_phy_reg_read(sata_port, SERDES_CR_DATA);
}
static void combo_phy_write(u8 sata_port, u32 addr, u32 data)
{
combo_phy_wait_for_ready(sata_port);
__combo_phy_reg_write(sata_port, SERDES_CR_ADDR, addr);
__combo_phy_reg_write(sata_port, SERDES_CR_DATA, data);
__combo_phy_reg_write(sata_port, SERDES_CR_CTL, CR_WR_RDN | CR_START);
}
static void highbank_cphy_disable_overrides(u8 sata_port)
{
u8 lane = port_data[sata_port].lane_mapping;
u32 tmp;
if (unlikely(port_data[sata_port].phy_base == NULL))
return;
tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + lane * SPHY_LANE);
tmp &= ~CPHY_SATA_OVERRIDE;
combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);
}
static void cphy_override_rx_mode(u8 sata_port, u32 val)
{
u8 lane = port_data[sata_port].lane_mapping;
u32 tmp;
tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + lane * SPHY_LANE);
tmp &= ~CPHY_SATA_OVERRIDE;
combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);
tmp |= CPHY_SATA_OVERRIDE;
combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);
tmp &= ~CPHY_SATA_DPLL_MODE;
tmp |= val << CPHY_SATA_DPLL_SHIFT;
combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);
tmp |= CPHY_SATA_DPLL_RESET;
combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);
tmp &= ~CPHY_SATA_DPLL_RESET;
combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);
msleep(15);
}
static void highbank_cphy_override_lane(u8 sata_port)
{
u8 lane = port_data[sata_port].lane_mapping;
u32 tmp, k = 0;
if (unlikely(port_data[sata_port].phy_base == NULL))
return;
do {
tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS +
lane * SPHY_LANE);
} while ((tmp & SPHY_HALF_RATE) && (k++ < 1000));
cphy_override_rx_mode(sata_port, 3);
}
static int highbank_initialize_phys(struct device *dev, void __iomem *addr)
{
struct device_node *sata_node = dev->of_node;
int phy_count = 0, phy, port = 0;
void __iomem *cphy_base[CPHY_PHY_COUNT];
struct device_node *phy_nodes[CPHY_PHY_COUNT];
memset(port_data, 0, sizeof(struct phy_lane_info) * CPHY_PORT_COUNT);
memset(phy_nodes, 0, sizeof(struct device_node*) * CPHY_PHY_COUNT);
do {
u32 tmp;
struct of_phandle_args phy_data;
if (of_parse_phandle_with_args(sata_node,
"calxeda,port-phys", "#phy-cells",
port, &phy_data))
break;
for (phy = 0; phy < phy_count; phy++) {
if (phy_nodes[phy] == phy_data.np)
break;
}
if (phy_nodes[phy] == NULL) {
phy_nodes[phy] = phy_data.np;
cphy_base[phy] = of_iomap(phy_nodes[phy], 0);
if (cphy_base[phy] == NULL) {
return 0;
}
phy_count += 1;
}
port_data[port].lane_mapping = phy_data.args[0];
of_property_read_u32(phy_nodes[phy], "phydev", &tmp);
port_data[port].phy_devs = tmp;
port_data[port].phy_base = cphy_base[phy];
of_node_put(phy_data.np);
port += 1;
} while (port < CPHY_PORT_COUNT);
return 0;
}
static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
struct ata_port *ap = link->ap;
struct ahci_port_priv *pp = ap->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
struct ata_taskfile tf;
bool online;
u32 sstatus;
int rc;
int retry = 10;
ahci_stop_engine(ap);
/* clear D2H reception area to properly wait for D2H FIS */
ata_tf_init(link->device, &tf);
tf.command = ATA_BUSY;
ata_tf_to_fis(&tf, 0, 0, d2h_fis);
do {
highbank_cphy_disable_overrides(link->ap->port_no);
rc = sata_link_hardreset(link, timing, deadline, &online, NULL);
highbank_cphy_override_lane(link->ap->port_no);
/* If the status is 1, we are connected, but the link did not
* come up. So retry resetting the link again.
*/
if (sata_scr_read(link, SCR_STATUS, &sstatus))
break;
if (!(sstatus & 0x3))
break;
} while (!online && retry--);
ahci_start_engine(ap);
if (online)
*class = ahci_dev_classify(ap);
return rc;
}
static struct ata_port_operations ahci_highbank_ops = {
.inherits = &ahci_ops,
.hardreset = ahci_highbank_hardreset,
};
static const struct ata_port_info ahci_highbank_port_info = {
.flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_highbank_ops,
};
static struct scsi_host_template ahci_highbank_platform_sht = {
AHCI_SHT("highbank-ahci"),
};
static const struct of_device_id ahci_of_match[] = {
{ .compatible = "calxeda,hb-ahci" },
{},
};
MODULE_DEVICE_TABLE(of, ahci_of_match);
static int __devinit ahci_highbank_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct ahci_host_priv *hpriv;
struct ata_host *host;
struct resource *mem;
int irq;
int n_ports;
int i;
int rc;
struct ata_port_info pi = ahci_highbank_port_info;
const struct ata_port_info *ppi[] = { &pi, NULL };
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!mem) {
dev_err(dev, "no mmio space\n");
return -EINVAL;
}
irq = platform_get_irq(pdev, 0);
if (irq <= 0) {
dev_err(dev, "no irq\n");
return -EINVAL;
}
hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
if (!hpriv) {
dev_err(dev, "can't alloc ahci_host_priv\n");
return -ENOMEM;
}
hpriv->flags |= (unsigned long)pi.private_data;
hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
if (!hpriv->mmio) {
dev_err(dev, "can't map %pR\n", mem);
return -ENOMEM;
}
rc = highbank_initialize_phys(dev, hpriv->mmio);
if (rc)
return rc;
ahci_save_initial_config(dev, hpriv, 0, 0);
/* prepare host */
if (hpriv->cap & HOST_CAP_NCQ)
pi.flags |= ATA_FLAG_NCQ;
if (hpriv->cap & HOST_CAP_PMP)
pi.flags |= ATA_FLAG_PMP;
ahci_set_em_messages(hpriv, &pi);
/* CAP.NP sometimes indicate the index of the last enabled
* port, at other times, that of the last possible port, so
* determining the maximum port number requires looking at
* both CAP.NP and port_map.
*/
n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
host = ata_host_alloc_pinfo(dev, ppi, n_ports);
if (!host) {
rc = -ENOMEM;
goto err0;
}
host->private_data = hpriv;
if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
host->flags |= ATA_HOST_PARALLEL_SCAN;
if (pi.flags & ATA_FLAG_EM)
ahci_reset_em(host);
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
ata_port_desc(ap, "mmio %pR", mem);
ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
/* set enclosure management message type */
if (ap->flags & ATA_FLAG_EM)
ap->em_message_type = hpriv->em_msg_type;
/* disabled/not-implemented port */
if (!(hpriv->port_map & (1 << i)))
ap->ops = &ata_dummy_port_ops;
}
rc = ahci_reset_controller(host);
if (rc)
goto err0;
ahci_init_controller(host);
ahci_print_info(host, "platform");
rc = ata_host_activate(host, irq, ahci_interrupt, 0,
&ahci_highbank_platform_sht);
if (rc)
goto err0;
return 0;
err0:
return rc;
}
#ifdef CONFIG_PM_SLEEP
static int ahci_highbank_suspend(struct device *dev)
{
struct ata_host *host = dev_get_drvdata(dev);
struct ahci_host_priv *hpriv = host->private_data;
void __iomem *mmio = hpriv->mmio;
u32 ctl;
int rc;
if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
dev_err(dev, "firmware update required for suspend/resume\n");
return -EIO;
}
/*
* AHCI spec rev1.1 section 8.3.3:
* Software must disable interrupts prior to requesting a
* transition of the HBA to D3 state.
*/
ctl = readl(mmio + HOST_CTL);
ctl &= ~HOST_IRQ_EN;
writel(ctl, mmio + HOST_CTL);
readl(mmio + HOST_CTL); /* flush */
rc = ata_host_suspend(host, PMSG_SUSPEND);
if (rc)
return rc;
return 0;
}
static int ahci_highbank_resume(struct device *dev)
{
struct ata_host *host = dev_get_drvdata(dev);
int rc;
if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
rc = ahci_reset_controller(host);
if (rc)
return rc;
ahci_init_controller(host);
}
ata_host_resume(host);
return 0;
}
#endif
SIMPLE_DEV_PM_OPS(ahci_highbank_pm_ops,
ahci_highbank_suspend, ahci_highbank_resume);
static struct platform_driver ahci_highbank_driver = {
.remove = ata_platform_remove_one,
.driver = {
.name = "highbank-ahci",
.owner = THIS_MODULE,
.of_match_table = ahci_of_match,
.pm = &ahci_highbank_pm_ops,
},
.probe = ahci_highbank_probe,
};
module_platform_driver(ahci_highbank_driver);
MODULE_DESCRIPTION("Calxeda Highbank AHCI SATA platform driver");
MODULE_AUTHOR("Mark Langsdorf <mark.langsdorf@calxeda.com>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("sata:highbank");
Reference in New Issue View Git Blame Copy Permalink