365 lines
8.9 KiB
C
365 lines
8.9 KiB
C
/*
|
|
* drivers/net/phy/at803x.c
|
|
*
|
|
* Driver for Atheros 803x PHY
|
|
*
|
|
* Author: Matus Ujhelyi <ujhelyi.m@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#include <linux/phy.h>
|
|
#include <linux/module.h>
|
|
#include <linux/string.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/gpio/consumer.h>
|
|
|
|
#define AT803X_INTR_ENABLE 0x12
|
|
#define AT803X_INTR_STATUS 0x13
|
|
#define AT803X_SMART_SPEED 0x14
|
|
#define AT803X_LED_CONTROL 0x18
|
|
#define AT803X_WOL_ENABLE 0x01
|
|
#define AT803X_DEVICE_ADDR 0x03
|
|
#define AT803X_LOC_MAC_ADDR_0_15_OFFSET 0x804C
|
|
#define AT803X_LOC_MAC_ADDR_16_31_OFFSET 0x804B
|
|
#define AT803X_LOC_MAC_ADDR_32_47_OFFSET 0x804A
|
|
#define AT803X_MMD_ACCESS_CONTROL 0x0D
|
|
#define AT803X_MMD_ACCESS_CONTROL_DATA 0x0E
|
|
#define AT803X_FUNC_DATA 0x4003
|
|
#define AT803X_INER 0x0012
|
|
#define AT803X_INER_INIT 0xec00
|
|
#define AT803X_INSR 0x0013
|
|
#define AT803X_DEBUG_ADDR 0x1D
|
|
#define AT803X_DEBUG_DATA 0x1E
|
|
#define AT803X_DEBUG_SYSTEM_MODE_CTRL 0x05
|
|
#define AT803X_DEBUG_RGMII_TX_CLK_DLY BIT(8)
|
|
|
|
#define ATH8030_PHY_ID 0x004dd076
|
|
#define ATH8031_PHY_ID 0x004dd074
|
|
#define ATH8035_PHY_ID 0x004dd072
|
|
|
|
MODULE_DESCRIPTION("Atheros 803x PHY driver");
|
|
MODULE_AUTHOR("Matus Ujhelyi");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
struct at803x_priv {
|
|
bool phy_reset:1;
|
|
struct gpio_desc *gpiod_reset;
|
|
};
|
|
|
|
struct at803x_context {
|
|
u16 bmcr;
|
|
u16 advertise;
|
|
u16 control1000;
|
|
u16 int_enable;
|
|
u16 smart_speed;
|
|
u16 led_control;
|
|
};
|
|
|
|
/* save relevant PHY registers to private copy */
|
|
static void at803x_context_save(struct phy_device *phydev,
|
|
struct at803x_context *context)
|
|
{
|
|
context->bmcr = phy_read(phydev, MII_BMCR);
|
|
context->advertise = phy_read(phydev, MII_ADVERTISE);
|
|
context->control1000 = phy_read(phydev, MII_CTRL1000);
|
|
context->int_enable = phy_read(phydev, AT803X_INTR_ENABLE);
|
|
context->smart_speed = phy_read(phydev, AT803X_SMART_SPEED);
|
|
context->led_control = phy_read(phydev, AT803X_LED_CONTROL);
|
|
}
|
|
|
|
/* restore relevant PHY registers from private copy */
|
|
static void at803x_context_restore(struct phy_device *phydev,
|
|
const struct at803x_context *context)
|
|
{
|
|
phy_write(phydev, MII_BMCR, context->bmcr);
|
|
phy_write(phydev, MII_ADVERTISE, context->advertise);
|
|
phy_write(phydev, MII_CTRL1000, context->control1000);
|
|
phy_write(phydev, AT803X_INTR_ENABLE, context->int_enable);
|
|
phy_write(phydev, AT803X_SMART_SPEED, context->smart_speed);
|
|
phy_write(phydev, AT803X_LED_CONTROL, context->led_control);
|
|
}
|
|
|
|
static int at803x_set_wol(struct phy_device *phydev,
|
|
struct ethtool_wolinfo *wol)
|
|
{
|
|
struct net_device *ndev = phydev->attached_dev;
|
|
const u8 *mac;
|
|
int ret;
|
|
u32 value;
|
|
unsigned int i, offsets[] = {
|
|
AT803X_LOC_MAC_ADDR_32_47_OFFSET,
|
|
AT803X_LOC_MAC_ADDR_16_31_OFFSET,
|
|
AT803X_LOC_MAC_ADDR_0_15_OFFSET,
|
|
};
|
|
|
|
if (!ndev)
|
|
return -ENODEV;
|
|
|
|
if (wol->wolopts & WAKE_MAGIC) {
|
|
mac = (const u8 *) ndev->dev_addr;
|
|
|
|
if (!is_valid_ether_addr(mac))
|
|
return -EFAULT;
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
|
|
AT803X_DEVICE_ADDR);
|
|
phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
|
|
offsets[i]);
|
|
phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
|
|
AT803X_FUNC_DATA);
|
|
phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
|
|
mac[(i * 2) + 1] | (mac[(i * 2)] << 8));
|
|
}
|
|
|
|
value = phy_read(phydev, AT803X_INTR_ENABLE);
|
|
value |= AT803X_WOL_ENABLE;
|
|
ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
|
|
if (ret)
|
|
return ret;
|
|
value = phy_read(phydev, AT803X_INTR_STATUS);
|
|
} else {
|
|
value = phy_read(phydev, AT803X_INTR_ENABLE);
|
|
value &= (~AT803X_WOL_ENABLE);
|
|
ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
|
|
if (ret)
|
|
return ret;
|
|
value = phy_read(phydev, AT803X_INTR_STATUS);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void at803x_get_wol(struct phy_device *phydev,
|
|
struct ethtool_wolinfo *wol)
|
|
{
|
|
u32 value;
|
|
|
|
wol->supported = WAKE_MAGIC;
|
|
wol->wolopts = 0;
|
|
|
|
value = phy_read(phydev, AT803X_INTR_ENABLE);
|
|
if (value & AT803X_WOL_ENABLE)
|
|
wol->wolopts |= WAKE_MAGIC;
|
|
}
|
|
|
|
static int at803x_suspend(struct phy_device *phydev)
|
|
{
|
|
int value;
|
|
int wol_enabled;
|
|
|
|
mutex_lock(&phydev->lock);
|
|
|
|
value = phy_read(phydev, AT803X_INTR_ENABLE);
|
|
wol_enabled = value & AT803X_WOL_ENABLE;
|
|
|
|
value = phy_read(phydev, MII_BMCR);
|
|
|
|
if (wol_enabled)
|
|
value |= BMCR_ISOLATE;
|
|
else
|
|
value |= BMCR_PDOWN;
|
|
|
|
phy_write(phydev, MII_BMCR, value);
|
|
|
|
mutex_unlock(&phydev->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at803x_resume(struct phy_device *phydev)
|
|
{
|
|
int value;
|
|
|
|
mutex_lock(&phydev->lock);
|
|
|
|
value = phy_read(phydev, MII_BMCR);
|
|
value &= ~(BMCR_PDOWN | BMCR_ISOLATE);
|
|
phy_write(phydev, MII_BMCR, value);
|
|
|
|
mutex_unlock(&phydev->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at803x_probe(struct phy_device *phydev)
|
|
{
|
|
struct device *dev = &phydev->dev;
|
|
struct at803x_priv *priv;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->gpiod_reset = devm_gpiod_get(dev, "reset");
|
|
if (IS_ERR(priv->gpiod_reset))
|
|
priv->gpiod_reset = NULL;
|
|
else
|
|
gpiod_direction_output(priv->gpiod_reset, 1);
|
|
|
|
phydev->priv = priv;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at803x_config_init(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
ret = genphy_config_init(phydev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
|
|
ret = phy_write(phydev, AT803X_DEBUG_ADDR,
|
|
AT803X_DEBUG_SYSTEM_MODE_CTRL);
|
|
if (ret)
|
|
return ret;
|
|
ret = phy_write(phydev, AT803X_DEBUG_DATA,
|
|
AT803X_DEBUG_RGMII_TX_CLK_DLY);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at803x_ack_interrupt(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
err = phy_read(phydev, AT803X_INSR);
|
|
|
|
return (err < 0) ? err : 0;
|
|
}
|
|
|
|
static int at803x_config_intr(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
int value;
|
|
|
|
value = phy_read(phydev, AT803X_INER);
|
|
|
|
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
|
|
err = phy_write(phydev, AT803X_INER,
|
|
value | AT803X_INER_INIT);
|
|
else
|
|
err = phy_write(phydev, AT803X_INER, 0);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void at803x_link_change_notify(struct phy_device *phydev)
|
|
{
|
|
struct at803x_priv *priv = phydev->priv;
|
|
|
|
/*
|
|
* Conduct a hardware reset for AT8030 every time a link loss is
|
|
* signalled. This is necessary to circumvent a hardware bug that
|
|
* occurs when the cable is unplugged while TX packets are pending
|
|
* in the FIFO. In such cases, the FIFO enters an error mode it
|
|
* cannot recover from by software.
|
|
*/
|
|
if (phydev->drv->phy_id == ATH8030_PHY_ID) {
|
|
if (phydev->state == PHY_NOLINK) {
|
|
if (priv->gpiod_reset && !priv->phy_reset) {
|
|
struct at803x_context context;
|
|
|
|
at803x_context_save(phydev, &context);
|
|
|
|
gpiod_set_value(priv->gpiod_reset, 0);
|
|
msleep(1);
|
|
gpiod_set_value(priv->gpiod_reset, 1);
|
|
msleep(1);
|
|
|
|
at803x_context_restore(phydev, &context);
|
|
|
|
dev_dbg(&phydev->dev, "%s(): phy was reset\n",
|
|
__func__);
|
|
priv->phy_reset = true;
|
|
}
|
|
} else {
|
|
priv->phy_reset = false;
|
|
}
|
|
}
|
|
}
|
|
|
|
static struct phy_driver at803x_driver[] = {
|
|
{
|
|
/* ATHEROS 8035 */
|
|
.phy_id = ATH8035_PHY_ID,
|
|
.name = "Atheros 8035 ethernet",
|
|
.phy_id_mask = 0xffffffef,
|
|
.probe = at803x_probe,
|
|
.config_init = at803x_config_init,
|
|
.link_change_notify = at803x_link_change_notify,
|
|
.set_wol = at803x_set_wol,
|
|
.get_wol = at803x_get_wol,
|
|
.suspend = at803x_suspend,
|
|
.resume = at803x_resume,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
},
|
|
}, {
|
|
/* ATHEROS 8030 */
|
|
.phy_id = ATH8030_PHY_ID,
|
|
.name = "Atheros 8030 ethernet",
|
|
.phy_id_mask = 0xffffffef,
|
|
.probe = at803x_probe,
|
|
.config_init = at803x_config_init,
|
|
.link_change_notify = at803x_link_change_notify,
|
|
.set_wol = at803x_set_wol,
|
|
.get_wol = at803x_get_wol,
|
|
.suspend = at803x_suspend,
|
|
.resume = at803x_resume,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
},
|
|
}, {
|
|
/* ATHEROS 8031 */
|
|
.phy_id = ATH8031_PHY_ID,
|
|
.name = "Atheros 8031 ethernet",
|
|
.phy_id_mask = 0xffffffef,
|
|
.probe = at803x_probe,
|
|
.config_init = at803x_config_init,
|
|
.link_change_notify = at803x_link_change_notify,
|
|
.set_wol = at803x_set_wol,
|
|
.get_wol = at803x_get_wol,
|
|
.suspend = at803x_suspend,
|
|
.resume = at803x_resume,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.ack_interrupt = &at803x_ack_interrupt,
|
|
.config_intr = &at803x_config_intr,
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
},
|
|
} };
|
|
|
|
module_phy_driver(at803x_driver);
|
|
|
|
static struct mdio_device_id __maybe_unused atheros_tbl[] = {
|
|
{ ATH8030_PHY_ID, 0xffffffef },
|
|
{ ATH8031_PHY_ID, 0xffffffef },
|
|
{ ATH8035_PHY_ID, 0xffffffef },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(mdio, atheros_tbl);
|