689 lines
18 KiB
C
689 lines
18 KiB
C
/*
|
|
* Copyright (C) 2012 Texas Instruments
|
|
* Author: Rob Clark <robdclark@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published by
|
|
* the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <linux/kfifo.h>
|
|
|
|
#include "tilcdc_drv.h"
|
|
#include "tilcdc_regs.h"
|
|
|
|
struct tilcdc_crtc {
|
|
struct drm_crtc base;
|
|
|
|
const struct tilcdc_panel_info *info;
|
|
uint32_t dirty;
|
|
dma_addr_t start, end;
|
|
struct drm_pending_vblank_event *event;
|
|
int dpms;
|
|
wait_queue_head_t frame_done_wq;
|
|
bool frame_done;
|
|
|
|
/* fb currently set to scanout 0/1: */
|
|
struct drm_framebuffer *scanout[2];
|
|
|
|
/* for deferred fb unref's: */
|
|
DECLARE_KFIFO_PTR(unref_fifo, struct drm_framebuffer *);
|
|
struct work_struct work;
|
|
};
|
|
#define to_tilcdc_crtc(x) container_of(x, struct tilcdc_crtc, base)
|
|
|
|
static void unref_worker(struct work_struct *work)
|
|
{
|
|
struct tilcdc_crtc *tilcdc_crtc =
|
|
container_of(work, struct tilcdc_crtc, work);
|
|
struct drm_device *dev = tilcdc_crtc->base.dev;
|
|
struct drm_framebuffer *fb;
|
|
|
|
mutex_lock(&dev->mode_config.mutex);
|
|
while (kfifo_get(&tilcdc_crtc->unref_fifo, &fb))
|
|
drm_framebuffer_unreference(fb);
|
|
mutex_unlock(&dev->mode_config.mutex);
|
|
}
|
|
|
|
static void set_scanout(struct drm_crtc *crtc, int n)
|
|
{
|
|
static const uint32_t base_reg[] = {
|
|
LCDC_DMA_FB_BASE_ADDR_0_REG,
|
|
LCDC_DMA_FB_BASE_ADDR_1_REG,
|
|
};
|
|
static const uint32_t ceil_reg[] = {
|
|
LCDC_DMA_FB_CEILING_ADDR_0_REG,
|
|
LCDC_DMA_FB_CEILING_ADDR_1_REG,
|
|
};
|
|
static const uint32_t stat[] = {
|
|
LCDC_END_OF_FRAME0, LCDC_END_OF_FRAME1,
|
|
};
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
struct drm_device *dev = crtc->dev;
|
|
|
|
pm_runtime_get_sync(dev->dev);
|
|
tilcdc_write(dev, base_reg[n], tilcdc_crtc->start);
|
|
tilcdc_write(dev, ceil_reg[n], tilcdc_crtc->end);
|
|
if (tilcdc_crtc->scanout[n]) {
|
|
if (kfifo_put(&tilcdc_crtc->unref_fifo,
|
|
(const struct drm_framebuffer **)&tilcdc_crtc->scanout[n])) {
|
|
struct tilcdc_drm_private *priv = dev->dev_private;
|
|
queue_work(priv->wq, &tilcdc_crtc->work);
|
|
} else {
|
|
dev_err(dev->dev, "unref fifo full!\n");
|
|
drm_framebuffer_unreference(tilcdc_crtc->scanout[n]);
|
|
}
|
|
}
|
|
tilcdc_crtc->scanout[n] = crtc->fb;
|
|
drm_framebuffer_reference(tilcdc_crtc->scanout[n]);
|
|
tilcdc_crtc->dirty &= ~stat[n];
|
|
pm_runtime_put_sync(dev->dev);
|
|
}
|
|
|
|
static void update_scanout(struct drm_crtc *crtc)
|
|
{
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_framebuffer *fb = crtc->fb;
|
|
struct drm_gem_cma_object *gem;
|
|
unsigned int depth, bpp;
|
|
|
|
drm_fb_get_bpp_depth(fb->pixel_format, &depth, &bpp);
|
|
gem = drm_fb_cma_get_gem_obj(fb, 0);
|
|
|
|
tilcdc_crtc->start = gem->paddr + fb->offsets[0] +
|
|
(crtc->y * fb->pitches[0]) + (crtc->x * bpp/8);
|
|
|
|
tilcdc_crtc->end = tilcdc_crtc->start +
|
|
(crtc->mode.vdisplay * fb->pitches[0]);
|
|
|
|
if (tilcdc_crtc->dpms == DRM_MODE_DPMS_ON) {
|
|
/* already enabled, so just mark the frames that need
|
|
* updating and they will be updated on vblank:
|
|
*/
|
|
tilcdc_crtc->dirty |= LCDC_END_OF_FRAME0 | LCDC_END_OF_FRAME1;
|
|
drm_vblank_get(dev, 0);
|
|
} else {
|
|
/* not enabled yet, so update registers immediately: */
|
|
set_scanout(crtc, 0);
|
|
set_scanout(crtc, 1);
|
|
}
|
|
}
|
|
|
|
static void start(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct tilcdc_drm_private *priv = dev->dev_private;
|
|
|
|
if (priv->rev == 2) {
|
|
tilcdc_set(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET);
|
|
msleep(1);
|
|
tilcdc_clear(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET);
|
|
msleep(1);
|
|
}
|
|
|
|
tilcdc_set(dev, LCDC_DMA_CTRL_REG, LCDC_DUAL_FRAME_BUFFER_ENABLE);
|
|
tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_PALETTE_LOAD_MODE(DATA_ONLY));
|
|
tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
|
|
}
|
|
|
|
static void stop(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
|
|
tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
|
|
}
|
|
|
|
static void tilcdc_crtc_destroy(struct drm_crtc *crtc)
|
|
{
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
|
|
WARN_ON(tilcdc_crtc->dpms == DRM_MODE_DPMS_ON);
|
|
|
|
drm_crtc_cleanup(crtc);
|
|
WARN_ON(!kfifo_is_empty(&tilcdc_crtc->unref_fifo));
|
|
kfifo_free(&tilcdc_crtc->unref_fifo);
|
|
kfree(tilcdc_crtc);
|
|
}
|
|
|
|
static int tilcdc_crtc_page_flip(struct drm_crtc *crtc,
|
|
struct drm_framebuffer *fb,
|
|
struct drm_pending_vblank_event *event)
|
|
{
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
struct drm_device *dev = crtc->dev;
|
|
|
|
if (tilcdc_crtc->event) {
|
|
dev_err(dev->dev, "already pending page flip!\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
crtc->fb = fb;
|
|
tilcdc_crtc->event = event;
|
|
update_scanout(crtc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tilcdc_crtc_dpms(struct drm_crtc *crtc, int mode)
|
|
{
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
struct drm_device *dev = crtc->dev;
|
|
struct tilcdc_drm_private *priv = dev->dev_private;
|
|
|
|
/* we really only care about on or off: */
|
|
if (mode != DRM_MODE_DPMS_ON)
|
|
mode = DRM_MODE_DPMS_OFF;
|
|
|
|
if (tilcdc_crtc->dpms == mode)
|
|
return;
|
|
|
|
tilcdc_crtc->dpms = mode;
|
|
|
|
pm_runtime_get_sync(dev->dev);
|
|
|
|
if (mode == DRM_MODE_DPMS_ON) {
|
|
pm_runtime_forbid(dev->dev);
|
|
start(crtc);
|
|
} else {
|
|
tilcdc_crtc->frame_done = false;
|
|
stop(crtc);
|
|
|
|
/*
|
|
* if necessary wait for framedone irq which will still come
|
|
* before putting things to sleep..
|
|
*/
|
|
if (priv->rev == 2) {
|
|
int ret = wait_event_timeout(
|
|
tilcdc_crtc->frame_done_wq,
|
|
tilcdc_crtc->frame_done,
|
|
msecs_to_jiffies(50));
|
|
if (ret == 0)
|
|
dev_err(dev->dev, "timeout waiting for framedone\n");
|
|
}
|
|
pm_runtime_allow(dev->dev);
|
|
}
|
|
|
|
pm_runtime_put_sync(dev->dev);
|
|
}
|
|
|
|
static bool tilcdc_crtc_mode_fixup(struct drm_crtc *crtc,
|
|
const struct drm_display_mode *mode,
|
|
struct drm_display_mode *adjusted_mode)
|
|
{
|
|
return true;
|
|
}
|
|
|
|
static void tilcdc_crtc_prepare(struct drm_crtc *crtc)
|
|
{
|
|
tilcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
|
|
}
|
|
|
|
static void tilcdc_crtc_commit(struct drm_crtc *crtc)
|
|
{
|
|
tilcdc_crtc_dpms(crtc, DRM_MODE_DPMS_ON);
|
|
}
|
|
|
|
static int tilcdc_crtc_mode_set(struct drm_crtc *crtc,
|
|
struct drm_display_mode *mode,
|
|
struct drm_display_mode *adjusted_mode,
|
|
int x, int y,
|
|
struct drm_framebuffer *old_fb)
|
|
{
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
struct drm_device *dev = crtc->dev;
|
|
struct tilcdc_drm_private *priv = dev->dev_private;
|
|
const struct tilcdc_panel_info *info = tilcdc_crtc->info;
|
|
uint32_t reg, hbp, hfp, hsw, vbp, vfp, vsw;
|
|
int ret;
|
|
|
|
ret = tilcdc_crtc_mode_valid(crtc, mode);
|
|
if (WARN_ON(ret))
|
|
return ret;
|
|
|
|
if (WARN_ON(!info))
|
|
return -EINVAL;
|
|
|
|
pm_runtime_get_sync(dev->dev);
|
|
|
|
/* Configure the Burst Size and fifo threshold of DMA: */
|
|
reg = tilcdc_read(dev, LCDC_DMA_CTRL_REG) & ~0x00000770;
|
|
switch (info->dma_burst_sz) {
|
|
case 1:
|
|
reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_1);
|
|
break;
|
|
case 2:
|
|
reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_2);
|
|
break;
|
|
case 4:
|
|
reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_4);
|
|
break;
|
|
case 8:
|
|
reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_8);
|
|
break;
|
|
case 16:
|
|
reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_16);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
reg |= (info->fifo_th << 8);
|
|
tilcdc_write(dev, LCDC_DMA_CTRL_REG, reg);
|
|
|
|
/* Configure timings: */
|
|
hbp = mode->htotal - mode->hsync_end;
|
|
hfp = mode->hsync_start - mode->hdisplay;
|
|
hsw = mode->hsync_end - mode->hsync_start;
|
|
vbp = mode->vtotal - mode->vsync_end;
|
|
vfp = mode->vsync_start - mode->vdisplay;
|
|
vsw = mode->vsync_end - mode->vsync_start;
|
|
|
|
DBG("%dx%d, hbp=%u, hfp=%u, hsw=%u, vbp=%u, vfp=%u, vsw=%u",
|
|
mode->hdisplay, mode->vdisplay, hbp, hfp, hsw, vbp, vfp, vsw);
|
|
|
|
/* Configure the AC Bias Period and Number of Transitions per Interrupt: */
|
|
reg = tilcdc_read(dev, LCDC_RASTER_TIMING_2_REG) & ~0x000fff00;
|
|
reg |= LCDC_AC_BIAS_FREQUENCY(info->ac_bias) |
|
|
LCDC_AC_BIAS_TRANSITIONS_PER_INT(info->ac_bias_intrpt);
|
|
|
|
/*
|
|
* subtract one from hfp, hbp, hsw because the hardware uses
|
|
* a value of 0 as 1
|
|
*/
|
|
if (priv->rev == 2) {
|
|
/* clear bits we're going to set */
|
|
reg &= ~0x78000033;
|
|
reg |= ((hfp-1) & 0x300) >> 8;
|
|
reg |= ((hbp-1) & 0x300) >> 4;
|
|
reg |= ((hsw-1) & 0x3c0) << 21;
|
|
}
|
|
tilcdc_write(dev, LCDC_RASTER_TIMING_2_REG, reg);
|
|
|
|
reg = (((mode->hdisplay >> 4) - 1) << 4) |
|
|
(((hbp-1) & 0xff) << 24) |
|
|
(((hfp-1) & 0xff) << 16) |
|
|
(((hsw-1) & 0x3f) << 10);
|
|
if (priv->rev == 2)
|
|
reg |= (((mode->hdisplay >> 4) - 1) & 0x40) >> 3;
|
|
tilcdc_write(dev, LCDC_RASTER_TIMING_0_REG, reg);
|
|
|
|
reg = ((mode->vdisplay - 1) & 0x3ff) |
|
|
((vbp & 0xff) << 24) |
|
|
((vfp & 0xff) << 16) |
|
|
(((vsw-1) & 0x3f) << 10);
|
|
tilcdc_write(dev, LCDC_RASTER_TIMING_1_REG, reg);
|
|
|
|
/*
|
|
* be sure to set Bit 10 for the V2 LCDC controller,
|
|
* otherwise limited to 1024 pixels width, stopping
|
|
* 1920x1080 being suppoted.
|
|
*/
|
|
if (priv->rev == 2) {
|
|
if ((mode->vdisplay - 1) & 0x400) {
|
|
tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG,
|
|
LCDC_LPP_B10);
|
|
} else {
|
|
tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG,
|
|
LCDC_LPP_B10);
|
|
}
|
|
}
|
|
|
|
/* Configure display type: */
|
|
reg = tilcdc_read(dev, LCDC_RASTER_CTRL_REG) &
|
|
~(LCDC_TFT_MODE | LCDC_MONO_8BIT_MODE | LCDC_MONOCHROME_MODE |
|
|
LCDC_V2_TFT_24BPP_MODE | LCDC_V2_TFT_24BPP_UNPACK | 0x000ff000);
|
|
reg |= LCDC_TFT_MODE; /* no monochrome/passive support */
|
|
if (info->tft_alt_mode)
|
|
reg |= LCDC_TFT_ALT_ENABLE;
|
|
if (priv->rev == 2) {
|
|
unsigned int depth, bpp;
|
|
|
|
drm_fb_get_bpp_depth(crtc->fb->pixel_format, &depth, &bpp);
|
|
switch (bpp) {
|
|
case 16:
|
|
break;
|
|
case 32:
|
|
reg |= LCDC_V2_TFT_24BPP_UNPACK;
|
|
/* fallthrough */
|
|
case 24:
|
|
reg |= LCDC_V2_TFT_24BPP_MODE;
|
|
break;
|
|
default:
|
|
dev_err(dev->dev, "invalid pixel format\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
reg |= info->fdd < 12;
|
|
tilcdc_write(dev, LCDC_RASTER_CTRL_REG, reg);
|
|
|
|
if (info->invert_pxl_clk)
|
|
tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_PIXEL_CLOCK);
|
|
else
|
|
tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_PIXEL_CLOCK);
|
|
|
|
if (info->sync_ctrl)
|
|
tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_CTRL);
|
|
else
|
|
tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_CTRL);
|
|
|
|
if (info->sync_edge)
|
|
tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_EDGE);
|
|
else
|
|
tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_EDGE);
|
|
|
|
if (mode->flags & DRM_MODE_FLAG_NHSYNC)
|
|
tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_HSYNC);
|
|
else
|
|
tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_HSYNC);
|
|
|
|
if (mode->flags & DRM_MODE_FLAG_NVSYNC)
|
|
tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_VSYNC);
|
|
else
|
|
tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_VSYNC);
|
|
|
|
if (info->raster_order)
|
|
tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ORDER);
|
|
else
|
|
tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ORDER);
|
|
|
|
|
|
update_scanout(crtc);
|
|
tilcdc_crtc_update_clk(crtc);
|
|
|
|
pm_runtime_put_sync(dev->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tilcdc_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
|
|
struct drm_framebuffer *old_fb)
|
|
{
|
|
update_scanout(crtc);
|
|
return 0;
|
|
}
|
|
|
|
static const struct drm_crtc_funcs tilcdc_crtc_funcs = {
|
|
.destroy = tilcdc_crtc_destroy,
|
|
.set_config = drm_crtc_helper_set_config,
|
|
.page_flip = tilcdc_crtc_page_flip,
|
|
};
|
|
|
|
static const struct drm_crtc_helper_funcs tilcdc_crtc_helper_funcs = {
|
|
.dpms = tilcdc_crtc_dpms,
|
|
.mode_fixup = tilcdc_crtc_mode_fixup,
|
|
.prepare = tilcdc_crtc_prepare,
|
|
.commit = tilcdc_crtc_commit,
|
|
.mode_set = tilcdc_crtc_mode_set,
|
|
.mode_set_base = tilcdc_crtc_mode_set_base,
|
|
};
|
|
|
|
int tilcdc_crtc_max_width(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct tilcdc_drm_private *priv = dev->dev_private;
|
|
int max_width = 0;
|
|
|
|
if (priv->rev == 1)
|
|
max_width = 1024;
|
|
else if (priv->rev == 2)
|
|
max_width = 2048;
|
|
|
|
return max_width;
|
|
}
|
|
|
|
int tilcdc_crtc_mode_valid(struct drm_crtc *crtc, struct drm_display_mode *mode)
|
|
{
|
|
struct tilcdc_drm_private *priv = crtc->dev->dev_private;
|
|
unsigned int bandwidth;
|
|
uint32_t hbp, hfp, hsw, vbp, vfp, vsw;
|
|
|
|
/*
|
|
* check to see if the width is within the range that
|
|
* the LCD Controller physically supports
|
|
*/
|
|
if (mode->hdisplay > tilcdc_crtc_max_width(crtc))
|
|
return MODE_VIRTUAL_X;
|
|
|
|
/* width must be multiple of 16 */
|
|
if (mode->hdisplay & 0xf)
|
|
return MODE_VIRTUAL_X;
|
|
|
|
if (mode->vdisplay > 2048)
|
|
return MODE_VIRTUAL_Y;
|
|
|
|
DBG("Processing mode %dx%d@%d with pixel clock %d",
|
|
mode->hdisplay, mode->vdisplay,
|
|
drm_mode_vrefresh(mode), mode->clock);
|
|
|
|
hbp = mode->htotal - mode->hsync_end;
|
|
hfp = mode->hsync_start - mode->hdisplay;
|
|
hsw = mode->hsync_end - mode->hsync_start;
|
|
vbp = mode->vtotal - mode->vsync_end;
|
|
vfp = mode->vsync_start - mode->vdisplay;
|
|
vsw = mode->vsync_end - mode->vsync_start;
|
|
|
|
if ((hbp-1) & ~0x3ff) {
|
|
DBG("Pruning mode: Horizontal Back Porch out of range");
|
|
return MODE_HBLANK_WIDE;
|
|
}
|
|
|
|
if ((hfp-1) & ~0x3ff) {
|
|
DBG("Pruning mode: Horizontal Front Porch out of range");
|
|
return MODE_HBLANK_WIDE;
|
|
}
|
|
|
|
if ((hsw-1) & ~0x3ff) {
|
|
DBG("Pruning mode: Horizontal Sync Width out of range");
|
|
return MODE_HSYNC_WIDE;
|
|
}
|
|
|
|
if (vbp & ~0xff) {
|
|
DBG("Pruning mode: Vertical Back Porch out of range");
|
|
return MODE_VBLANK_WIDE;
|
|
}
|
|
|
|
if (vfp & ~0xff) {
|
|
DBG("Pruning mode: Vertical Front Porch out of range");
|
|
return MODE_VBLANK_WIDE;
|
|
}
|
|
|
|
if ((vsw-1) & ~0x3f) {
|
|
DBG("Pruning mode: Vertical Sync Width out of range");
|
|
return MODE_VSYNC_WIDE;
|
|
}
|
|
|
|
/*
|
|
* some devices have a maximum allowed pixel clock
|
|
* configured from the DT
|
|
*/
|
|
if (mode->clock > priv->max_pixelclock) {
|
|
DBG("Pruning mode: pixel clock too high");
|
|
return MODE_CLOCK_HIGH;
|
|
}
|
|
|
|
/*
|
|
* some devices further limit the max horizontal resolution
|
|
* configured from the DT
|
|
*/
|
|
if (mode->hdisplay > priv->max_width)
|
|
return MODE_BAD_WIDTH;
|
|
|
|
/* filter out modes that would require too much memory bandwidth: */
|
|
bandwidth = mode->hdisplay * mode->vdisplay *
|
|
drm_mode_vrefresh(mode);
|
|
if (bandwidth > priv->max_bandwidth) {
|
|
DBG("Pruning mode: exceeds defined bandwidth limit");
|
|
return MODE_BAD;
|
|
}
|
|
|
|
return MODE_OK;
|
|
}
|
|
|
|
void tilcdc_crtc_set_panel_info(struct drm_crtc *crtc,
|
|
const struct tilcdc_panel_info *info)
|
|
{
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
tilcdc_crtc->info = info;
|
|
}
|
|
|
|
void tilcdc_crtc_update_clk(struct drm_crtc *crtc)
|
|
{
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
struct drm_device *dev = crtc->dev;
|
|
struct tilcdc_drm_private *priv = dev->dev_private;
|
|
int dpms = tilcdc_crtc->dpms;
|
|
unsigned int lcd_clk, div;
|
|
int ret;
|
|
|
|
pm_runtime_get_sync(dev->dev);
|
|
|
|
if (dpms == DRM_MODE_DPMS_ON)
|
|
tilcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
|
|
|
|
/* in raster mode, minimum divisor is 2: */
|
|
ret = clk_set_rate(priv->disp_clk, crtc->mode.clock * 1000 * 2);
|
|
if (ret) {
|
|
dev_err(dev->dev, "failed to set display clock rate to: %d\n",
|
|
crtc->mode.clock);
|
|
goto out;
|
|
}
|
|
|
|
lcd_clk = clk_get_rate(priv->clk);
|
|
div = lcd_clk / (crtc->mode.clock * 1000);
|
|
|
|
DBG("lcd_clk=%u, mode clock=%d, div=%u", lcd_clk, crtc->mode.clock, div);
|
|
DBG("fck=%lu, dpll_disp_ck=%lu", clk_get_rate(priv->clk), clk_get_rate(priv->disp_clk));
|
|
|
|
/* Configure the LCD clock divisor. */
|
|
tilcdc_write(dev, LCDC_CTRL_REG, LCDC_CLK_DIVISOR(div) |
|
|
LCDC_RASTER_MODE);
|
|
|
|
if (priv->rev == 2)
|
|
tilcdc_set(dev, LCDC_CLK_ENABLE_REG,
|
|
LCDC_V2_DMA_CLK_EN | LCDC_V2_LIDD_CLK_EN |
|
|
LCDC_V2_CORE_CLK_EN);
|
|
|
|
if (dpms == DRM_MODE_DPMS_ON)
|
|
tilcdc_crtc_dpms(crtc, DRM_MODE_DPMS_ON);
|
|
|
|
out:
|
|
pm_runtime_put_sync(dev->dev);
|
|
}
|
|
|
|
irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc)
|
|
{
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
struct drm_device *dev = crtc->dev;
|
|
struct tilcdc_drm_private *priv = dev->dev_private;
|
|
uint32_t stat = tilcdc_read_irqstatus(dev);
|
|
|
|
if ((stat & LCDC_SYNC_LOST) && (stat & LCDC_FIFO_UNDERFLOW)) {
|
|
stop(crtc);
|
|
dev_err(dev->dev, "error: %08x\n", stat);
|
|
tilcdc_clear_irqstatus(dev, stat);
|
|
start(crtc);
|
|
} else if (stat & LCDC_PL_LOAD_DONE) {
|
|
tilcdc_clear_irqstatus(dev, stat);
|
|
} else {
|
|
struct drm_pending_vblank_event *event;
|
|
unsigned long flags;
|
|
uint32_t dirty = tilcdc_crtc->dirty & stat;
|
|
|
|
tilcdc_clear_irqstatus(dev, stat);
|
|
|
|
if (dirty & LCDC_END_OF_FRAME0)
|
|
set_scanout(crtc, 0);
|
|
|
|
if (dirty & LCDC_END_OF_FRAME1)
|
|
set_scanout(crtc, 1);
|
|
|
|
drm_handle_vblank(dev, 0);
|
|
|
|
spin_lock_irqsave(&dev->event_lock, flags);
|
|
event = tilcdc_crtc->event;
|
|
tilcdc_crtc->event = NULL;
|
|
if (event)
|
|
drm_send_vblank_event(dev, 0, event);
|
|
spin_unlock_irqrestore(&dev->event_lock, flags);
|
|
|
|
if (dirty && !tilcdc_crtc->dirty)
|
|
drm_vblank_put(dev, 0);
|
|
}
|
|
|
|
if (priv->rev == 2) {
|
|
if (stat & LCDC_FRAME_DONE) {
|
|
tilcdc_crtc->frame_done = true;
|
|
wake_up(&tilcdc_crtc->frame_done_wq);
|
|
}
|
|
tilcdc_write(dev, LCDC_END_OF_INT_IND_REG, 0);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
void tilcdc_crtc_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file)
|
|
{
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
struct drm_pending_vblank_event *event;
|
|
struct drm_device *dev = crtc->dev;
|
|
unsigned long flags;
|
|
|
|
/* Destroy the pending vertical blanking event associated with the
|
|
* pending page flip, if any, and disable vertical blanking interrupts.
|
|
*/
|
|
spin_lock_irqsave(&dev->event_lock, flags);
|
|
event = tilcdc_crtc->event;
|
|
if (event && event->base.file_priv == file) {
|
|
tilcdc_crtc->event = NULL;
|
|
event->base.destroy(&event->base);
|
|
drm_vblank_put(dev, 0);
|
|
}
|
|
spin_unlock_irqrestore(&dev->event_lock, flags);
|
|
}
|
|
|
|
struct drm_crtc *tilcdc_crtc_create(struct drm_device *dev)
|
|
{
|
|
struct tilcdc_crtc *tilcdc_crtc;
|
|
struct drm_crtc *crtc;
|
|
int ret;
|
|
|
|
tilcdc_crtc = kzalloc(sizeof(*tilcdc_crtc), GFP_KERNEL);
|
|
if (!tilcdc_crtc) {
|
|
dev_err(dev->dev, "allocation failed\n");
|
|
return NULL;
|
|
}
|
|
|
|
crtc = &tilcdc_crtc->base;
|
|
|
|
tilcdc_crtc->dpms = DRM_MODE_DPMS_OFF;
|
|
init_waitqueue_head(&tilcdc_crtc->frame_done_wq);
|
|
|
|
ret = kfifo_alloc(&tilcdc_crtc->unref_fifo, 16, GFP_KERNEL);
|
|
if (ret) {
|
|
dev_err(dev->dev, "could not allocate unref FIFO\n");
|
|
goto fail;
|
|
}
|
|
|
|
INIT_WORK(&tilcdc_crtc->work, unref_worker);
|
|
|
|
ret = drm_crtc_init(dev, crtc, &tilcdc_crtc_funcs);
|
|
if (ret < 0)
|
|
goto fail;
|
|
|
|
drm_crtc_helper_add(crtc, &tilcdc_crtc_helper_funcs);
|
|
|
|
return crtc;
|
|
|
|
fail:
|
|
tilcdc_crtc_destroy(crtc);
|
|
return NULL;
|
|
}
|