linux-sg2042/arch/sparc/kernel/rtrap_64.S

340 lines
8.8 KiB
ArmAsm

/*
* rtrap.S: Preparing for return from trap on Sparc V9.
*
* Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
* Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
*/
#include <asm/asi.h>
#include <asm/pstate.h>
#include <asm/ptrace.h>
#include <asm/spitfire.h>
#include <asm/head.h>
#include <asm/visasm.h>
#include <asm/processor.h>
#ifdef CONFIG_CONTEXT_TRACKING
# define SCHEDULE_USER schedule_user
#else
# define SCHEDULE_USER schedule
#endif
.text
.align 32
__handle_preemption:
call SCHEDULE_USER
wrpr %g0, RTRAP_PSTATE, %pstate
ba,pt %xcc, __handle_preemption_continue
wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate
__handle_user_windows:
call fault_in_user_windows
wrpr %g0, RTRAP_PSTATE, %pstate
ba,pt %xcc, __handle_preemption_continue
wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate
__handle_userfpu:
rd %fprs, %l5
andcc %l5, FPRS_FEF, %g0
sethi %hi(TSTATE_PEF), %o0
be,a,pn %icc, __handle_userfpu_continue
andn %l1, %o0, %l1
ba,a,pt %xcc, __handle_userfpu_continue
__handle_signal:
mov %l5, %o1
add %sp, PTREGS_OFF, %o0
mov %l0, %o2
call do_notify_resume
wrpr %g0, RTRAP_PSTATE, %pstate
wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate
/* Signal delivery can modify pt_regs tstate, so we must
* reload it.
*/
ldx [%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
sethi %hi(0xf << 20), %l4
and %l1, %l4, %l4
ba,pt %xcc, __handle_preemption_continue
andn %l1, %l4, %l1
/* When returning from a NMI (%pil==15) interrupt we want to
* avoid running softirqs, doing IRQ tracing, preempting, etc.
*/
.globl rtrap_nmi
rtrap_nmi: ldx [%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
sethi %hi(0xf << 20), %l4
and %l1, %l4, %l4
andn %l1, %l4, %l1
srl %l4, 20, %l4
ba,pt %xcc, rtrap_no_irq_enable
nop
/* Do not actually set the %pil here. We will do that
* below after we clear PSTATE_IE in the %pstate register.
* If we re-enable interrupts here, we can recurse down
* the hardirq stack potentially endlessly, causing a
* stack overflow.
*/
.align 64
.globl rtrap_irq, rtrap, irqsz_patchme, rtrap_xcall
rtrap_irq:
rtrap:
/* mm/ultra.S:xcall_report_regs KNOWS about this load. */
ldx [%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
rtrap_xcall:
sethi %hi(0xf << 20), %l4
and %l1, %l4, %l4
andn %l1, %l4, %l1
srl %l4, 20, %l4
#ifdef CONFIG_TRACE_IRQFLAGS
brnz,pn %l4, rtrap_no_irq_enable
nop
call trace_hardirqs_on
nop
/* Do not actually set the %pil here. We will do that
* below after we clear PSTATE_IE in the %pstate register.
* If we re-enable interrupts here, we can recurse down
* the hardirq stack potentially endlessly, causing a
* stack overflow.
*
* It is tempting to put this test and trace_hardirqs_on
* call at the 'rt_continue' label, but that will not work
* as that path hits unconditionally and we do not want to
* execute this in NMI return paths, for example.
*/
#endif
rtrap_no_irq_enable:
andcc %l1, TSTATE_PRIV, %l3
bne,pn %icc, to_kernel
nop
/* We must hold IRQs off and atomically test schedule+signal
* state, then hold them off all the way back to userspace.
* If we are returning to kernel, none of this matters. Note
* that we are disabling interrupts via PSTATE_IE, not using
* %pil.
*
* If we do not do this, there is a window where we would do
* the tests, later the signal/resched event arrives but we do
* not process it since we are still in kernel mode. It would
* take until the next local IRQ before the signal/resched
* event would be handled.
*
* This also means that if we have to deal with user
* windows, we have to redo all of these sched+signal checks
* with IRQs disabled.
*/
to_user: wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate
wrpr 0, %pil
__handle_preemption_continue:
ldx [%g6 + TI_FLAGS], %l0
sethi %hi(_TIF_USER_WORK_MASK), %o0
or %o0, %lo(_TIF_USER_WORK_MASK), %o0
andcc %l0, %o0, %g0
sethi %hi(TSTATE_PEF), %o0
be,pt %xcc, user_nowork
andcc %l1, %o0, %g0
andcc %l0, _TIF_NEED_RESCHED, %g0
bne,pn %xcc, __handle_preemption
andcc %l0, _TIF_DO_NOTIFY_RESUME_MASK, %g0
bne,pn %xcc, __handle_signal
ldub [%g6 + TI_WSAVED], %o2
brnz,pn %o2, __handle_user_windows
nop
sethi %hi(TSTATE_PEF), %o0
andcc %l1, %o0, %g0
/* This fpdepth clear is necessary for non-syscall rtraps only */
user_nowork:
bne,pn %xcc, __handle_userfpu
stb %g0, [%g6 + TI_FPDEPTH]
__handle_userfpu_continue:
rt_continue: ldx [%sp + PTREGS_OFF + PT_V9_G1], %g1
ldx [%sp + PTREGS_OFF + PT_V9_G2], %g2
ldx [%sp + PTREGS_OFF + PT_V9_G3], %g3
ldx [%sp + PTREGS_OFF + PT_V9_G4], %g4
ldx [%sp + PTREGS_OFF + PT_V9_G5], %g5
brz,pt %l3, 1f
mov %g6, %l2
/* Must do this before thread reg is clobbered below. */
LOAD_PER_CPU_BASE(%g5, %g6, %i0, %i1, %i2)
1:
ldx [%sp + PTREGS_OFF + PT_V9_G6], %g6
ldx [%sp + PTREGS_OFF + PT_V9_G7], %g7
/* Normal globals are restored, go to trap globals. */
661: wrpr %g0, RTRAP_PSTATE_AG_IRQOFF, %pstate
nop
.section .sun4v_2insn_patch, "ax"
.word 661b
wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate
SET_GL(1)
.previous
mov %l2, %g6
ldx [%sp + PTREGS_OFF + PT_V9_I0], %i0
ldx [%sp + PTREGS_OFF + PT_V9_I1], %i1
ldx [%sp + PTREGS_OFF + PT_V9_I2], %i2
ldx [%sp + PTREGS_OFF + PT_V9_I3], %i3
ldx [%sp + PTREGS_OFF + PT_V9_I4], %i4
ldx [%sp + PTREGS_OFF + PT_V9_I5], %i5
ldx [%sp + PTREGS_OFF + PT_V9_I6], %i6
ldx [%sp + PTREGS_OFF + PT_V9_I7], %i7
ldx [%sp + PTREGS_OFF + PT_V9_TPC], %l2
ldx [%sp + PTREGS_OFF + PT_V9_TNPC], %o2
ld [%sp + PTREGS_OFF + PT_V9_Y], %o3
wr %o3, %g0, %y
wrpr %l4, 0x0, %pil
wrpr %g0, 0x1, %tl
andn %l1, TSTATE_SYSCALL, %l1
wrpr %l1, %g0, %tstate
wrpr %l2, %g0, %tpc
wrpr %o2, %g0, %tnpc
brnz,pn %l3, kern_rtt
mov PRIMARY_CONTEXT, %l7
661: ldxa [%l7 + %l7] ASI_DMMU, %l0
.section .sun4v_1insn_patch, "ax"
.word 661b
ldxa [%l7 + %l7] ASI_MMU, %l0
.previous
sethi %hi(sparc64_kern_pri_nuc_bits), %l1
ldx [%l1 + %lo(sparc64_kern_pri_nuc_bits)], %l1
or %l0, %l1, %l0
661: stxa %l0, [%l7] ASI_DMMU
.section .sun4v_1insn_patch, "ax"
.word 661b
stxa %l0, [%l7] ASI_MMU
.previous
sethi %hi(KERNBASE), %l7
flush %l7
rdpr %wstate, %l1
rdpr %otherwin, %l2
srl %l1, 3, %l1
wrpr %l2, %g0, %canrestore
wrpr %l1, %g0, %wstate
brnz,pt %l2, user_rtt_restore
wrpr %g0, %g0, %otherwin
ldx [%g6 + TI_FLAGS], %g3
wr %g0, ASI_AIUP, %asi
rdpr %cwp, %g1
andcc %g3, _TIF_32BIT, %g0
sub %g1, 1, %g1
bne,pt %xcc, user_rtt_fill_32bit
wrpr %g1, %cwp
ba,a,pt %xcc, user_rtt_fill_64bit
nop
user_rtt_fill_fixup_dax:
ba,pt %xcc, user_rtt_fill_fixup_common
mov 1, %g3
user_rtt_fill_fixup_mna:
ba,pt %xcc, user_rtt_fill_fixup_common
mov 2, %g3
user_rtt_fill_fixup:
ba,pt %xcc, user_rtt_fill_fixup_common
clr %g3
user_rtt_pre_restore:
add %g1, 1, %g1
wrpr %g1, 0x0, %cwp
user_rtt_restore:
restore
rdpr %canrestore, %g1
wrpr %g1, 0x0, %cleanwin
retry
nop
kern_rtt: rdpr %canrestore, %g1
brz,pn %g1, kern_rtt_fill
nop
kern_rtt_restore:
stw %g0, [%sp + PTREGS_OFF + PT_V9_MAGIC]
restore
retry
to_kernel:
#ifdef CONFIG_PREEMPT
ldsw [%g6 + TI_PRE_COUNT], %l5
brnz %l5, kern_fpucheck
ldx [%g6 + TI_FLAGS], %l5
andcc %l5, _TIF_NEED_RESCHED, %g0
be,pt %xcc, kern_fpucheck
nop
cmp %l4, 0
bne,pn %xcc, kern_fpucheck
nop
call preempt_schedule_irq
nop
ba,pt %xcc, rtrap
#endif
kern_fpucheck: ldub [%g6 + TI_FPDEPTH], %l5
brz,pt %l5, rt_continue
srl %l5, 1, %o0
add %g6, TI_FPSAVED, %l6
ldub [%l6 + %o0], %l2
sub %l5, 2, %l5
add %g6, TI_GSR, %o1
andcc %l2, (FPRS_FEF|FPRS_DU), %g0
be,pt %icc, 2f
and %l2, FPRS_DL, %l6
andcc %l2, FPRS_FEF, %g0
be,pn %icc, 5f
sll %o0, 3, %o5
rd %fprs, %g1
wr %g1, FPRS_FEF, %fprs
ldx [%o1 + %o5], %g1
add %g6, TI_XFSR, %o1
sll %o0, 8, %o2
add %g6, TI_FPREGS, %o3
brz,pn %l6, 1f
add %g6, TI_FPREGS+0x40, %o4
membar #Sync
ldda [%o3 + %o2] ASI_BLK_P, %f0
ldda [%o4 + %o2] ASI_BLK_P, %f16
membar #Sync
1: andcc %l2, FPRS_DU, %g0
be,pn %icc, 1f
wr %g1, 0, %gsr
add %o2, 0x80, %o2
membar #Sync
ldda [%o3 + %o2] ASI_BLK_P, %f32
ldda [%o4 + %o2] ASI_BLK_P, %f48
1: membar #Sync
ldx [%o1 + %o5], %fsr
2: stb %l5, [%g6 + TI_FPDEPTH]
ba,pt %xcc, rt_continue
nop
5: wr %g0, FPRS_FEF, %fprs
sll %o0, 8, %o2
add %g6, TI_FPREGS+0x80, %o3
add %g6, TI_FPREGS+0xc0, %o4
membar #Sync
ldda [%o3 + %o2] ASI_BLK_P, %f32
ldda [%o4 + %o2] ASI_BLK_P, %f48
membar #Sync
wr %g0, FPRS_DU, %fprs
ba,pt %xcc, rt_continue
stb %l5, [%g6 + TI_FPDEPTH]