linux-sg2042/drivers/usb
Thinh Nguyen 9d6173e125 usb: dwc3: Fix dr_mode validation
This patch follows the similar fix in dwc2. See
commit 5268ed9d2e ("usb: dwc2: Fix dr_mode validation")

Currently, the dr_mode is only checked against the module configuration.
It also needs to be checked against the hardware capablities.

The driver now checks if both the module configuration and hardware are
capable of the dr_mode value. If not, then it will issue a warning and
fall back to a supported value. If it is unable to fall back to a
suitable value, then the probe will fail.

Behavior summary:

      module          :  actual
 HW   config  dr_mode :  dr_mode
---------------------------------
 host  host   any     :  host
 host  dev    any     :  INVALID
 host  otg    any     :  host

 dev   host   any     :  INVALID
 dev   dev    any     :  dev
 dev   otg    any     :  dev

 otg   host   any     :  host
 otg   dev    any     :  dev
 otg   otg    any     :  dr_mode

Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-07 13:29:20 +03:00
..
atm Use "foo *bar" instead of "foo * bar". 2016-04-28 12:57:49 -07:00
c67x00 c67x00-hcd: use USB_DT_HUB 2015-04-03 19:03:16 +02:00
chipidea usb: chipidea: Kconfig: improve Kconfig help text 2016-06-21 10:48:30 +08:00
class cdc-acm: fix wrong pipe type on rx interrupt xfers 2016-08-15 16:30:56 +02:00
common usb: ulpi: make ops struct constant 2016-09-06 10:47:25 +03:00
core USB: remove race condition in usbfs/libusb when using reap-after-disconnect 2016-08-09 16:14:18 +02:00
dwc2 usb: dwc2: gadget: free TX FIFO after killing requests 2016-08-31 10:06:06 +03:00
dwc3 usb: dwc3: Fix dr_mode validation 2016-09-07 13:29:20 +03:00
early usb: early/ehci-dbgp: make it explicitly non-modular 2016-06-26 11:48:18 -07:00
gadget usb: gadget: configfs: log function unbinding as debug 2016-08-31 10:06:05 +03:00
host xhci: don't dereference a xhci member after removing xhci 2016-08-16 09:42:47 +02:00
image usb: microtek: Use "foo *bar" instead of "foo * bar". 2016-06-07 22:18:39 -07:00
isp1760 usb: Remove unnecessary space before open square bracket. 2016-05-09 13:08:46 +02:00
misc usb: misc: usbtest: add fix for driver hang 2016-08-11 18:31:51 +02:00
mon usb: core: rename mutex usb_bus_list_lock to usb_bus_idr_lock 2016-02-06 21:55:57 -08:00
musb usb: musb: sunxi: Simplify dr_mode handling 2016-07-17 08:23:57 +09:00
phy usb: phy: ab8500-usb: fix spelling mistake "regester" -> "register" 2016-08-29 10:46:05 +03:00
renesas_usbhs usb: renesas_usbhs: set quirk_avoids_skb_reserve if USB-DMAC is used 2016-08-31 10:06:04 +03:00
serial USB: serial: fix memleak in driver-registration error path 2016-08-08 13:41:17 +02:00
storage USB: uas: Fix slave queue_depth not being set 2016-06-01 14:56:24 -07:00
usbip Merge 4.7-rc4 into usb-next 2016-06-20 07:40:51 -07:00
wusbcore usb: wusbcore: Do not initialise statics to 0. 2016-05-09 13:08:46 +02:00
Kconfig usb: common: rework CONFIG_USB_COMMON logic 2016-04-18 15:23:36 +03:00
Makefile usb: fsl: drop USB_FSL_MPH_DR_OF Kconfig symbol 2016-03-04 15:14:29 +02:00
README
usb-skeleton.c

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.