561 lines
13 KiB
C
561 lines
13 KiB
C
/*
|
|
* linux/arch/arm/mach-omap1/board-h3.c
|
|
*
|
|
* This file contains OMAP1710 H3 specific code.
|
|
*
|
|
* Copyright (C) 2004 Texas Instruments, Inc.
|
|
* Copyright (C) 2002 MontaVista Software, Inc.
|
|
* Copyright (C) 2001 RidgeRun, Inc.
|
|
* Author: RidgeRun, Inc.
|
|
* Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/init.h>
|
|
#include <linux/major.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/input.h>
|
|
|
|
#include <asm/setup.h>
|
|
#include <asm/page.h>
|
|
#include <asm/hardware.h>
|
|
#include <asm/gpio.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/flash.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <asm/arch/tps65010.h>
|
|
#include <asm/arch/gpioexpander.h>
|
|
#include <asm/arch/irqs.h>
|
|
#include <asm/arch/mux.h>
|
|
#include <asm/arch/tc.h>
|
|
#include <asm/arch/irda.h>
|
|
#include <asm/arch/usb.h>
|
|
#include <asm/arch/keypad.h>
|
|
#include <asm/arch/dma.h>
|
|
#include <asm/arch/common.h>
|
|
#include <asm/arch/mcbsp.h>
|
|
#include <asm/arch/omap-alsa.h>
|
|
|
|
extern int omap_gpio_init(void);
|
|
|
|
static int h3_keymap[] = {
|
|
KEY(0, 0, KEY_LEFT),
|
|
KEY(0, 1, KEY_RIGHT),
|
|
KEY(0, 2, KEY_3),
|
|
KEY(0, 3, KEY_F10),
|
|
KEY(0, 4, KEY_F5),
|
|
KEY(0, 5, KEY_9),
|
|
KEY(1, 0, KEY_DOWN),
|
|
KEY(1, 1, KEY_UP),
|
|
KEY(1, 2, KEY_2),
|
|
KEY(1, 3, KEY_F9),
|
|
KEY(1, 4, KEY_F7),
|
|
KEY(1, 5, KEY_0),
|
|
KEY(2, 0, KEY_ENTER),
|
|
KEY(2, 1, KEY_6),
|
|
KEY(2, 2, KEY_1),
|
|
KEY(2, 3, KEY_F2),
|
|
KEY(2, 4, KEY_F6),
|
|
KEY(2, 5, KEY_HOME),
|
|
KEY(3, 0, KEY_8),
|
|
KEY(3, 1, KEY_5),
|
|
KEY(3, 2, KEY_F12),
|
|
KEY(3, 3, KEY_F3),
|
|
KEY(3, 4, KEY_F8),
|
|
KEY(3, 5, KEY_END),
|
|
KEY(4, 0, KEY_7),
|
|
KEY(4, 1, KEY_4),
|
|
KEY(4, 2, KEY_F11),
|
|
KEY(4, 3, KEY_F1),
|
|
KEY(4, 4, KEY_F4),
|
|
KEY(4, 5, KEY_ESC),
|
|
KEY(5, 0, KEY_F13),
|
|
KEY(5, 1, KEY_F14),
|
|
KEY(5, 2, KEY_F15),
|
|
KEY(5, 3, KEY_F16),
|
|
KEY(5, 4, KEY_SLEEP),
|
|
0
|
|
};
|
|
|
|
|
|
static struct mtd_partition nor_partitions[] = {
|
|
/* bootloader (U-Boot, etc) in first sector */
|
|
{
|
|
.name = "bootloader",
|
|
.offset = 0,
|
|
.size = SZ_128K,
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
},
|
|
/* bootloader params in the next sector */
|
|
{
|
|
.name = "params",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = SZ_128K,
|
|
.mask_flags = 0,
|
|
},
|
|
/* kernel */
|
|
{
|
|
.name = "kernel",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = SZ_2M,
|
|
.mask_flags = 0
|
|
},
|
|
/* file system */
|
|
{
|
|
.name = "filesystem",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = MTDPART_SIZ_FULL,
|
|
.mask_flags = 0
|
|
}
|
|
};
|
|
|
|
static struct flash_platform_data nor_data = {
|
|
.map_name = "cfi_probe",
|
|
.width = 2,
|
|
.parts = nor_partitions,
|
|
.nr_parts = ARRAY_SIZE(nor_partitions),
|
|
};
|
|
|
|
static struct resource nor_resource = {
|
|
/* This is on CS3, wherever it's mapped */
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device nor_device = {
|
|
.name = "omapflash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &nor_data,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &nor_resource,
|
|
};
|
|
|
|
static struct mtd_partition nand_partitions[] = {
|
|
#if 0
|
|
/* REVISIT: enable these partitions if you make NAND BOOT work */
|
|
{
|
|
.name = "xloader",
|
|
.offset = 0,
|
|
.size = 64 * 1024,
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
},
|
|
{
|
|
.name = "bootloader",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = 256 * 1024,
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
},
|
|
{
|
|
.name = "params",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = 192 * 1024,
|
|
},
|
|
{
|
|
.name = "kernel",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = 2 * SZ_1M,
|
|
},
|
|
#endif
|
|
{
|
|
.name = "filesystem",
|
|
.size = MTDPART_SIZ_FULL,
|
|
.offset = MTDPART_OFS_APPEND,
|
|
},
|
|
};
|
|
|
|
/* dip switches control NAND chip access: 8 bit, 16 bit, or neither */
|
|
static struct nand_platform_data nand_data = {
|
|
.options = NAND_SAMSUNG_LP_OPTIONS,
|
|
.parts = nand_partitions,
|
|
.nr_parts = ARRAY_SIZE(nand_partitions),
|
|
};
|
|
|
|
static struct resource nand_resource = {
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device nand_device = {
|
|
.name = "omapnand",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &nand_data,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &nand_resource,
|
|
};
|
|
|
|
static struct resource smc91x_resources[] = {
|
|
[0] = {
|
|
.start = OMAP1710_ETHR_START, /* Physical */
|
|
.end = OMAP1710_ETHR_START + 0xf,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = OMAP_GPIO_IRQ(40),
|
|
.end = OMAP_GPIO_IRQ(40),
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device smc91x_device = {
|
|
.name = "smc91x",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(smc91x_resources),
|
|
.resource = smc91x_resources,
|
|
};
|
|
|
|
#define GPTIMER_BASE 0xFFFB1400
|
|
#define GPTIMER_REGS(x) (0xFFFB1400 + (x * 0x800))
|
|
#define GPTIMER_REGS_SIZE 0x46
|
|
|
|
static struct resource intlat_resources[] = {
|
|
[0] = {
|
|
.start = GPTIMER_REGS(0), /* Physical */
|
|
.end = GPTIMER_REGS(0) + GPTIMER_REGS_SIZE,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = INT_1610_GPTIMER1,
|
|
.end = INT_1610_GPTIMER1,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device intlat_device = {
|
|
.name = "omap_intlat",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(intlat_resources),
|
|
.resource = intlat_resources,
|
|
};
|
|
|
|
static struct resource h3_kp_resources[] = {
|
|
[0] = {
|
|
.start = INT_KEYBOARD,
|
|
.end = INT_KEYBOARD,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct omap_kp_platform_data h3_kp_data = {
|
|
.rows = 8,
|
|
.cols = 8,
|
|
.keymap = h3_keymap,
|
|
.keymapsize = ARRAY_SIZE(h3_keymap),
|
|
.rep = 1,
|
|
.delay = 9,
|
|
.dbounce = 1,
|
|
};
|
|
|
|
static struct platform_device h3_kp_device = {
|
|
.name = "omap-keypad",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &h3_kp_data,
|
|
},
|
|
.num_resources = ARRAY_SIZE(h3_kp_resources),
|
|
.resource = h3_kp_resources,
|
|
};
|
|
|
|
|
|
/* Select between the IrDA and aGPS module
|
|
*/
|
|
static int h3_select_irda(struct device *dev, int state)
|
|
{
|
|
unsigned char expa;
|
|
int err = 0;
|
|
|
|
if ((err = read_gpio_expa(&expa, 0x26))) {
|
|
printk(KERN_ERR "Error reading from I/O EXPANDER \n");
|
|
return err;
|
|
}
|
|
|
|
/* 'P6' enable/disable IRDA_TX and IRDA_RX */
|
|
if (state & IR_SEL) { /* IrDA */
|
|
if ((err = write_gpio_expa(expa | 0x40, 0x26))) {
|
|
printk(KERN_ERR "Error writing to I/O EXPANDER \n");
|
|
return err;
|
|
}
|
|
} else {
|
|
if ((err = write_gpio_expa(expa & ~0x40, 0x26))) {
|
|
printk(KERN_ERR "Error writing to I/O EXPANDER \n");
|
|
return err;
|
|
}
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static void set_trans_mode(struct work_struct *work)
|
|
{
|
|
struct omap_irda_config *irda_config =
|
|
container_of(work, struct omap_irda_config, gpio_expa.work);
|
|
int mode = irda_config->mode;
|
|
unsigned char expa;
|
|
int err = 0;
|
|
|
|
if ((err = read_gpio_expa(&expa, 0x27)) != 0) {
|
|
printk(KERN_ERR "Error reading from I/O expander\n");
|
|
}
|
|
|
|
expa &= ~0x03;
|
|
|
|
if (mode & IR_SIRMODE) {
|
|
expa |= 0x01;
|
|
} else { /* MIR/FIR */
|
|
expa |= 0x03;
|
|
}
|
|
|
|
if ((err = write_gpio_expa(expa, 0x27)) != 0) {
|
|
printk(KERN_ERR "Error writing to I/O expander\n");
|
|
}
|
|
}
|
|
|
|
static int h3_transceiver_mode(struct device *dev, int mode)
|
|
{
|
|
struct omap_irda_config *irda_config = dev->platform_data;
|
|
|
|
irda_config->mode = mode;
|
|
cancel_delayed_work(&irda_config->gpio_expa);
|
|
PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode);
|
|
schedule_delayed_work(&irda_config->gpio_expa, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct omap_irda_config h3_irda_data = {
|
|
.transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
|
|
.transceiver_mode = h3_transceiver_mode,
|
|
.select_irda = h3_select_irda,
|
|
.rx_channel = OMAP_DMA_UART3_RX,
|
|
.tx_channel = OMAP_DMA_UART3_TX,
|
|
.dest_start = UART3_THR,
|
|
.src_start = UART3_RHR,
|
|
.tx_trigger = 0,
|
|
.rx_trigger = 0,
|
|
};
|
|
|
|
static struct resource h3_irda_resources[] = {
|
|
[0] = {
|
|
.start = INT_UART3,
|
|
.end = INT_UART3,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static u64 irda_dmamask = 0xffffffff;
|
|
|
|
static struct platform_device h3_irda_device = {
|
|
.name = "omapirda",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &h3_irda_data,
|
|
.dma_mask = &irda_dmamask,
|
|
},
|
|
.num_resources = ARRAY_SIZE(h3_irda_resources),
|
|
.resource = h3_irda_resources,
|
|
};
|
|
|
|
static struct platform_device h3_lcd_device = {
|
|
.name = "lcd_h3",
|
|
.id = -1,
|
|
};
|
|
|
|
static struct omap_mcbsp_reg_cfg mcbsp_regs = {
|
|
.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
|
|
.spcr1 = RINTM(3) | RRST,
|
|
.rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
|
|
RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1),
|
|
.rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
|
|
.xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
|
|
XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG,
|
|
.xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
|
|
.srgr1 = FWID(15),
|
|
.srgr2 = GSYNC | CLKSP | FSGM | FPER(31),
|
|
|
|
.pcr0 = CLKRM | SCLKME | FSXP | FSRP | CLKXP | CLKRP,
|
|
//.pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
|
|
};
|
|
|
|
static struct omap_alsa_codec_config alsa_config = {
|
|
.name = "H3 TSC2101",
|
|
.mcbsp_regs_alsa = &mcbsp_regs,
|
|
.codec_configure_dev = NULL, // tsc2101_configure,
|
|
.codec_set_samplerate = NULL, // tsc2101_set_samplerate,
|
|
.codec_clock_setup = NULL, // tsc2101_clock_setup,
|
|
.codec_clock_on = NULL, // tsc2101_clock_on,
|
|
.codec_clock_off = NULL, // tsc2101_clock_off,
|
|
.get_default_samplerate = NULL, // tsc2101_get_default_samplerate,
|
|
};
|
|
|
|
static struct platform_device h3_mcbsp1_device = {
|
|
.name = "omap_alsa_mcbsp",
|
|
.id = 1,
|
|
.dev = {
|
|
.platform_data = &alsa_config,
|
|
},
|
|
};
|
|
|
|
static struct platform_device *devices[] __initdata = {
|
|
&nor_device,
|
|
&nand_device,
|
|
&smc91x_device,
|
|
&intlat_device,
|
|
&h3_irda_device,
|
|
&h3_kp_device,
|
|
&h3_lcd_device,
|
|
&h3_mcbsp1_device,
|
|
};
|
|
|
|
static struct omap_usb_config h3_usb_config __initdata = {
|
|
/* usb1 has a Mini-AB port and external isp1301 transceiver */
|
|
.otg = 2,
|
|
|
|
#ifdef CONFIG_USB_GADGET_OMAP
|
|
.hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */
|
|
#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
|
|
/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
|
|
.hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */
|
|
#endif
|
|
|
|
.pins[1] = 3,
|
|
};
|
|
|
|
static struct omap_mmc_config h3_mmc_config __initdata = {
|
|
.mmc[0] = {
|
|
.enabled = 1,
|
|
.power_pin = -1, /* tps65010 GPIO4 */
|
|
.switch_pin = OMAP_MPUIO(1),
|
|
},
|
|
};
|
|
|
|
static struct omap_uart_config h3_uart_config __initdata = {
|
|
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
|
|
};
|
|
|
|
static struct omap_lcd_config h3_lcd_config __initdata = {
|
|
.ctrl_name = "internal",
|
|
};
|
|
|
|
static struct omap_board_config_kernel h3_config[] = {
|
|
{ OMAP_TAG_USB, &h3_usb_config },
|
|
{ OMAP_TAG_MMC, &h3_mmc_config },
|
|
{ OMAP_TAG_UART, &h3_uart_config },
|
|
{ OMAP_TAG_LCD, &h3_lcd_config },
|
|
};
|
|
|
|
static struct i2c_board_info __initdata h3_i2c_board_info[] = {
|
|
{
|
|
I2C_BOARD_INFO("tps65010", 0x48),
|
|
.type = "tps65013",
|
|
/* .irq = OMAP_GPIO_IRQ(??), */
|
|
},
|
|
/* TODO when driver support is ready:
|
|
* - isp1301 OTG transceiver
|
|
* - optional ov9640 camera sensor at 0x30
|
|
* - ...
|
|
*/
|
|
};
|
|
|
|
#define H3_NAND_RB_GPIO_PIN 10
|
|
|
|
static int nand_dev_ready(struct nand_platform_data *data)
|
|
{
|
|
return omap_get_gpio_datain(H3_NAND_RB_GPIO_PIN);
|
|
}
|
|
|
|
static void __init h3_init(void)
|
|
{
|
|
/* Here we assume the NOR boot config: NOR on CS3 (possibly swapped
|
|
* to address 0 by a dip switch), NAND on CS2B. The NAND driver will
|
|
* notice whether a NAND chip is enabled at probe time.
|
|
*
|
|
* H3 support NAND-boot, with a dip switch to put NOR on CS2B and NAND
|
|
* (which on H2 may be 16bit) on CS3. Try detecting that in code here,
|
|
* to avoid probing every possible flash configuration...
|
|
*/
|
|
nor_resource.end = nor_resource.start = omap_cs3_phys();
|
|
nor_resource.end += SZ_32M - 1;
|
|
|
|
nand_resource.end = nand_resource.start = OMAP_CS2B_PHYS;
|
|
nand_resource.end += SZ_4K - 1;
|
|
if (!(omap_request_gpio(H3_NAND_RB_GPIO_PIN)))
|
|
nand_data.dev_ready = nand_dev_ready;
|
|
|
|
/* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */
|
|
/* GPIO10 pullup/down register, Enable pullup on GPIO10 */
|
|
omap_cfg_reg(V2_1710_GPIO10);
|
|
|
|
platform_add_devices(devices, ARRAY_SIZE(devices));
|
|
omap_board_config = h3_config;
|
|
omap_board_config_size = ARRAY_SIZE(h3_config);
|
|
omap_serial_init();
|
|
|
|
/* FIXME setup irq for tps65013 chip */
|
|
i2c_register_board_info(1, h3_i2c_board_info,
|
|
ARRAY_SIZE(h3_i2c_board_info));
|
|
}
|
|
|
|
static void __init h3_init_smc91x(void)
|
|
{
|
|
omap_cfg_reg(W15_1710_GPIO40);
|
|
if (omap_request_gpio(40) < 0) {
|
|
printk("Error requesting gpio 40 for smc91x irq\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
static void __init h3_init_irq(void)
|
|
{
|
|
omap1_init_common_hw();
|
|
omap_init_irq();
|
|
omap_gpio_init();
|
|
h3_init_smc91x();
|
|
}
|
|
|
|
static void __init h3_map_io(void)
|
|
{
|
|
omap1_map_common_io();
|
|
}
|
|
|
|
#ifdef CONFIG_TPS65010
|
|
static int __init h3_tps_init(void)
|
|
{
|
|
if (!machine_is_omap_h3())
|
|
return 0;
|
|
|
|
/* gpio4 for SD, gpio3 for VDD_DSP */
|
|
/* FIXME send power to DSP iff it's configured */
|
|
|
|
/* Enable LOW_PWR */
|
|
tps65013_set_low_pwr(ON);
|
|
|
|
return 0;
|
|
}
|
|
fs_initcall(h3_tps_init);
|
|
#endif
|
|
|
|
MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
|
|
/* Maintainer: Texas Instruments, Inc. */
|
|
.phys_io = 0xfff00000,
|
|
.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
|
|
.boot_params = 0x10000100,
|
|
.map_io = h3_map_io,
|
|
.init_irq = h3_init_irq,
|
|
.init_machine = h3_init,
|
|
.timer = &omap_timer,
|
|
MACHINE_END
|