linux-sg2042/drivers/usb
Daniel Mack 9ad96e694c usb: musb: re-introduce musb->port_mode
Define MUSB_PORT_MODE_{HOST,GADGET,DUAL_ROLE} and store the
platform-specified value in struct musb.

Note that MUSB_PORT_MODE_HOST has to be set to 1 in order to match
existing device tree bindings which are already documented but in fact
unusued. For information on the bindings, please refer to

  Documentation/devicetree/bindings/usb/omap-usb.txt
  Documentation/devicetree/bindings/usb/am33xx-usb.txt

Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28 19:22:24 +03:00
..
atm USB: cxacru: potential underflow in cxacru_cm_get_array() 2013-05-20 11:35:47 -07:00
c67x00 usb: c67x00 RetryCnt value in c67x00 TD should be 3 2013-03-07 12:31:37 +08:00
chipidea USB fixes for 3.10-rc2 2013-05-23 09:23:32 -07:00
class Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input 2013-05-01 13:20:04 -07:00
core USB: reset resume quirk needed by a hub 2013-05-16 17:28:28 -07:00
dwc3 USB: set device dma_mask without reference to global data 2013-05-16 17:30:52 -07:00
early fix build of EHCI debug port code when USB_CHIPIDEA but !USB_EHCI_HCD 2012-11-02 10:13:33 -07:00
gadget usb: gadget: drop unused USB_GADGET_MUSB_HDRC 2013-05-28 19:22:20 +03:00
host USB fixes for 3.10-rc2 2013-05-23 09:23:32 -07:00
image USB: regroup all depends on USB within an if USB block 2013-04-09 16:49:07 -07:00
misc Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs 2013-05-01 17:51:54 -07:00
mon USB: regroup all depends on USB within an if USB block 2013-04-09 16:49:07 -07:00
musb usb: musb: re-introduce musb->port_mode 2013-05-28 19:22:24 +03:00
phy drivers/usb/phy: don't check resource with devm_ioremap_resource 2013-05-18 11:58:00 +02:00
renesas_usbhs USB: regroup all depends on USB within an if USB block 2013-04-09 16:49:07 -07:00
serial USB: ftdi_sio: Add support for Newport CONEX motor drivers 2013-05-17 11:55:23 -07:00
storage USB: usb-stor: realtek_cr: Fix compile error 2013-05-16 17:28:27 -07:00
wusbcore USB: regroup all depends on USB within an if USB block 2013-04-09 16:49:07 -07:00
Kconfig USB: regroup all depends on USB within an if USB block 2013-04-09 16:49:07 -07:00
Makefile usb: phy: remove CONFIG_USB_OTG_UTILS 2013-03-18 11:18:08 +02:00
README
usb-common.c usb: otg: move usb_otg_state_string to usb-common.c 2013-03-18 11:18:03 +02:00
usb-skeleton.c USB: usb-skeleton.c: fix blocked forever in skel_read 2013-03-25 13:32:20 -07:00

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.