linux-sg2042/drivers/bluetooth
Sean Wang 9ce67c3235 Bluetooth: btusb: Add protocol support for MediaTek MT7663U USB devices
This adds the support of enabling MT7663U Bluetooth function running
on the top of btusb driver.

The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.

T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  5 Spd=5000 MxCh= 0
D:  Ver= 3.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=0e8d ProdID=7663 Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=160mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06 21:44:25 +02:00
..
Kconfig Bluetooth: btusb: Add protocol support for MediaTek MT7668U USB devices 2019-07-06 21:44:25 +02:00
Makefile Bluetooth: mediatek: add support for MediaTek MT7663S and MT7668S SDIO devices 2019-04-23 18:09:07 +02:00
ath3k.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156 2019-05-30 11:26:35 -07:00
bcm203x.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156 2019-05-30 11:26:35 -07:00
bfusb.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156 2019-05-30 11:26:35 -07:00
bluecard_cs.c bluetooth: bluecard_cs: Replace GFP_ATOMIC with GFP_KERNEL in bluecard_hci_set_baud_rate() 2018-07-23 18:05:00 +02:00
bpa10x.c Bluetooth: Cleanup formatting and coding style 2019-07-06 12:39:04 +02:00
bt3c_cs.c Bluetooth: bt3c_cs: Fix obsolete function 2018-09-27 12:57:39 +02:00
btbcm.c Bluetooth: btbcm: Add entry for BCM4359C0 UART bluetooth 2019-07-06 12:56:44 +02:00
btbcm.h treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156 2019-05-30 11:26:35 -07:00
btintel.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156 2019-05-30 11:26:35 -07:00
btintel.h treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156 2019-05-30 11:26:35 -07:00
btmrvl_debugfs.c Bluetooth: btmrvl: Re-use kstrtol_from_user() 2018-05-30 08:16:05 +02:00
btmrvl_drv.h Bluetooth: btmrvl: Drop unused GPIO includes 2019-01-22 09:51:20 +01:00
btmrvl_main.c Bluetooth: btmrvl: support sysfs initiated firmware coredump 2018-05-29 15:59:50 +02:00
btmrvl_sdio.c Bluetooth: btmrvl: add support for SD8987 chipset 2019-04-23 19:01:45 +02:00
btmrvl_sdio.h btmrvl: add platform specific wakeup interrupt support 2016-05-02 19:26:15 +02:00
btmtksdio.c Bluetooth: btmtksdio: Add runtime PM support to SDIO based Bluetooth 2019-04-23 18:36:20 +02:00
btmtkuart.c Bluetooth: btmtkuart: add an implementation for clock osc property 2019-07-06 13:00:04 +02:00
btqca.c Bluetooth: hci_qca: Load customized NVM based on the device property 2019-07-06 12:55:39 +02:00
btqca.h Bluetooth: hci_qca: Load customized NVM based on the device property 2019-07-06 12:55:39 +02:00
btqcomsmd.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
btrsi.c Bluetooth: btrsi: fix bt tx timeout issue 2018-09-27 12:53:40 +02:00
btrtl.c Bluetooth:: btrtl: Add support for RTL8723DU 2019-07-06 13:00:58 +02:00
btrtl.h Bluetooth: btrtl: HCI reset on close for Realtek BT chip 2019-07-06 12:32:50 +02:00
btsdio.c Bluetooth: btsdio: Do not bind to non-removable BCM4356 2019-07-06 12:27:55 +02:00
btusb.c Bluetooth: btusb: Add protocol support for MediaTek MT7663U USB devices 2019-07-06 21:44:25 +02:00
btwilink.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 333 2019-06-05 17:37:06 +02:00
dtl1_cs.c networking: add and use skb_put_u8() 2017-06-16 11:48:40 -04:00
h4_recv.h treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156 2019-05-30 11:26:35 -07:00
hci_ag6xx.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156 2019-05-30 11:26:35 -07:00
hci_ath.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156 2019-05-30 11:26:35 -07:00
hci_bcm.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156 2019-05-30 11:26:35 -07:00
hci_bcsp.c Bluetooth: hci_bcsp: Fix memory leak in rx_skb 2019-07-06 13:02:38 +02:00
hci_h4.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156 2019-05-30 11:26:35 -07:00
hci_h5.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156 2019-05-30 11:26:35 -07:00
hci_intel.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156 2019-05-30 11:26:35 -07:00
hci_ldisc.c Bluetooth: hci_ldisc: Add function to wait for characters to be sent 2019-07-06 12:53:56 +02:00
hci_ll.c Bluetooth: Cleanup formatting and coding style 2019-07-06 12:39:04 +02:00
hci_mrvl.c Bluetooth: hci_mrvl: Add serdev support 2019-07-06 12:53:56 +02:00
hci_nokia.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 2019-05-30 11:26:37 -07:00
hci_qca.c Bluetooth: hci_qca: Load customized NVM based on the device property 2019-07-06 12:55:39 +02:00
hci_serdev.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 2019-05-30 11:26:37 -07:00
hci_uart.h Bluetooth: hci_ldisc: Add function to wait for characters to be sent 2019-07-06 12:53:56 +02:00
hci_vhci.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156 2019-05-30 11:26:35 -07:00