2038 lines
57 KiB
C
2038 lines
57 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
||
/* $Id: cosa.c,v 1.31 2000/03/08 17:47:16 kas Exp $ */
|
||
|
||
/*
|
||
* Copyright (C) 1995-1997 Jan "Yenya" Kasprzak <kas@fi.muni.cz>
|
||
* Generic HDLC port Copyright (C) 2008 Krzysztof Halasa <khc@pm.waw.pl>
|
||
*/
|
||
|
||
/*
|
||
* The driver for the SRP and COSA synchronous serial cards.
|
||
*
|
||
* HARDWARE INFO
|
||
*
|
||
* Both cards are developed at the Institute of Computer Science,
|
||
* Masaryk University (http://www.ics.muni.cz/). The hardware is
|
||
* developed by Jiri Novotny <novotny@ics.muni.cz>. More information
|
||
* and the photo of both cards is available at
|
||
* http://www.pavoucek.cz/cosa.html. The card documentation, firmwares
|
||
* and other goods can be downloaded from ftp://ftp.ics.muni.cz/pub/cosa/.
|
||
* For Linux-specific utilities, see below in the "Software info" section.
|
||
* If you want to order the card, contact Jiri Novotny.
|
||
*
|
||
* The SRP (serial port?, the Czech word "srp" means "sickle") card
|
||
* is a 2-port intelligent (with its own 8-bit CPU) synchronous serial card
|
||
* with V.24 interfaces up to 80kb/s each.
|
||
*
|
||
* The COSA (communication serial adapter?, the Czech word "kosa" means
|
||
* "scythe") is a next-generation sync/async board with two interfaces
|
||
* - currently any of V.24, X.21, V.35 and V.36 can be selected.
|
||
* It has a 16-bit SAB80166 CPU and can do up to 10 Mb/s per channel.
|
||
* The 8-channels version is in development.
|
||
*
|
||
* Both types have downloadable firmware and communicate via ISA DMA.
|
||
* COSA can be also a bus-mastering device.
|
||
*
|
||
* SOFTWARE INFO
|
||
*
|
||
* The homepage of the Linux driver is at http://www.fi.muni.cz/~kas/cosa/.
|
||
* The CVS tree of Linux driver can be viewed there, as well as the
|
||
* firmware binaries and user-space utilities for downloading the firmware
|
||
* into the card and setting up the card.
|
||
*
|
||
* The Linux driver (unlike the present *BSD drivers :-) can work even
|
||
* for the COSA and SRP in one computer and allows each channel to work
|
||
* in one of the two modes (character or network device).
|
||
*
|
||
* AUTHOR
|
||
*
|
||
* The Linux driver was written by Jan "Yenya" Kasprzak <kas@fi.muni.cz>.
|
||
*
|
||
* You can mail me bugfixes and even success reports. I am especially
|
||
* interested in the SMP and/or muliti-channel success/failure reports
|
||
* (I wonder if I did the locking properly :-).
|
||
*
|
||
* THE AUTHOR USED THE FOLLOWING SOURCES WHEN PROGRAMMING THE DRIVER
|
||
*
|
||
* The COSA/SRP NetBSD driver by Zdenek Salvet and Ivos Cernohlavek
|
||
* The skeleton.c by Donald Becker
|
||
* The SDL Riscom/N2 driver by Mike Natale
|
||
* The Comtrol Hostess SV11 driver by Alan Cox
|
||
* The Sync PPP/Cisco HDLC layer (syncppp.c) ported to Linux by Alan Cox
|
||
*/
|
||
|
||
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
||
|
||
#include <linux/module.h>
|
||
#include <linux/kernel.h>
|
||
#include <linux/sched/signal.h>
|
||
#include <linux/slab.h>
|
||
#include <linux/poll.h>
|
||
#include <linux/fs.h>
|
||
#include <linux/interrupt.h>
|
||
#include <linux/delay.h>
|
||
#include <linux/hdlc.h>
|
||
#include <linux/errno.h>
|
||
#include <linux/ioport.h>
|
||
#include <linux/netdevice.h>
|
||
#include <linux/spinlock.h>
|
||
#include <linux/mutex.h>
|
||
#include <linux/device.h>
|
||
#include <asm/io.h>
|
||
#include <asm/dma.h>
|
||
#include <asm/byteorder.h>
|
||
|
||
#undef COSA_SLOW_IO /* for testing purposes only */
|
||
|
||
#include "cosa.h"
|
||
|
||
/* Maximum length of the identification string. */
|
||
#define COSA_MAX_ID_STRING 128
|
||
|
||
/* Maximum length of the channel name */
|
||
#define COSA_MAX_NAME (sizeof("cosaXXXcXXX")+1)
|
||
|
||
/* Per-channel data structure */
|
||
|
||
struct channel_data {
|
||
int usage; /* Usage count; >0 for chrdev, -1 for netdev */
|
||
int num; /* Number of the channel */
|
||
struct cosa_data *cosa; /* Pointer to the per-card structure */
|
||
int txsize; /* Size of transmitted data */
|
||
char *txbuf; /* Transmit buffer */
|
||
char name[COSA_MAX_NAME]; /* channel name */
|
||
|
||
/* The HW layer interface */
|
||
/* routine called from the RX interrupt */
|
||
char *(*setup_rx)(struct channel_data *channel, int size);
|
||
/* routine called when the RX is done (from the EOT interrupt) */
|
||
int (*rx_done)(struct channel_data *channel);
|
||
/* routine called when the TX is done (from the EOT interrupt) */
|
||
int (*tx_done)(struct channel_data *channel, int size);
|
||
|
||
/* Character device parts */
|
||
struct mutex rlock;
|
||
struct semaphore wsem;
|
||
char *rxdata;
|
||
int rxsize;
|
||
wait_queue_head_t txwaitq, rxwaitq;
|
||
int tx_status, rx_status;
|
||
|
||
/* generic HDLC device parts */
|
||
struct net_device *netdev;
|
||
struct sk_buff *rx_skb, *tx_skb;
|
||
};
|
||
|
||
/* cosa->firmware_status bits */
|
||
#define COSA_FW_RESET (1<<0) /* Is the ROM monitor active? */
|
||
#define COSA_FW_DOWNLOAD (1<<1) /* Is the microcode downloaded? */
|
||
#define COSA_FW_START (1<<2) /* Is the microcode running? */
|
||
|
||
struct cosa_data {
|
||
int num; /* Card number */
|
||
char name[COSA_MAX_NAME]; /* Card name - e.g "cosa0" */
|
||
unsigned int datareg, statusreg; /* I/O ports */
|
||
unsigned short irq, dma; /* IRQ and DMA number */
|
||
unsigned short startaddr; /* Firmware start address */
|
||
unsigned short busmaster; /* Use busmastering? */
|
||
int nchannels; /* # of channels on this card */
|
||
int driver_status; /* For communicating with firmware */
|
||
int firmware_status; /* Downloaded, reseted, etc. */
|
||
unsigned long rxbitmap, txbitmap;/* Bitmap of channels who are willing to send/receive data */
|
||
unsigned long rxtx; /* RX or TX in progress? */
|
||
int enabled;
|
||
int usage; /* usage count */
|
||
int txchan, txsize, rxsize;
|
||
struct channel_data *rxchan;
|
||
char *bouncebuf;
|
||
char *txbuf, *rxbuf;
|
||
struct channel_data *chan;
|
||
spinlock_t lock; /* For exclusive operations on this structure */
|
||
char id_string[COSA_MAX_ID_STRING]; /* ROM monitor ID string */
|
||
char *type; /* card type */
|
||
};
|
||
|
||
/*
|
||
* Define this if you want all the possible ports to be autoprobed.
|
||
* It is here but it probably is not a good idea to use this.
|
||
*/
|
||
/* #define COSA_ISA_AUTOPROBE 1 */
|
||
|
||
/*
|
||
* Character device major number. 117 was allocated for us.
|
||
* The value of 0 means to allocate a first free one.
|
||
*/
|
||
static DEFINE_MUTEX(cosa_chardev_mutex);
|
||
static int cosa_major = 117;
|
||
|
||
/*
|
||
* Encoding of the minor numbers:
|
||
* The lowest CARD_MINOR_BITS bits means the channel on the single card,
|
||
* the highest bits means the card number.
|
||
*/
|
||
#define CARD_MINOR_BITS 4 /* How many bits in minor number are reserved
|
||
* for the single card */
|
||
/*
|
||
* The following depends on CARD_MINOR_BITS. Unfortunately, the "MODULE_STRING"
|
||
* macro doesn't like anything other than the raw number as an argument :-(
|
||
*/
|
||
#define MAX_CARDS 16
|
||
/* #define MAX_CARDS (1 << (8-CARD_MINOR_BITS)) */
|
||
|
||
#define DRIVER_RX_READY 0x0001
|
||
#define DRIVER_TX_READY 0x0002
|
||
#define DRIVER_TXMAP_SHIFT 2
|
||
#define DRIVER_TXMAP_MASK 0x0c /* FIXME: 0xfc for 8-channel version */
|
||
|
||
/*
|
||
* for cosa->rxtx - indicates whether either transmit or receive is
|
||
* in progress. These values are mean number of the bit.
|
||
*/
|
||
#define TXBIT 0
|
||
#define RXBIT 1
|
||
#define IRQBIT 2
|
||
|
||
#define COSA_MTU 2000 /* FIXME: I don't know this exactly */
|
||
|
||
#undef DEBUG_DATA //1 /* Dump the data read or written to the channel */
|
||
#undef DEBUG_IRQS //1 /* Print the message when the IRQ is received */
|
||
#undef DEBUG_IO //1 /* Dump the I/O traffic */
|
||
|
||
#define TX_TIMEOUT (5*HZ)
|
||
|
||
/* Maybe the following should be allocated dynamically */
|
||
static struct cosa_data cosa_cards[MAX_CARDS];
|
||
static int nr_cards;
|
||
|
||
#ifdef COSA_ISA_AUTOPROBE
|
||
static int io[MAX_CARDS+1] = { 0x220, 0x228, 0x210, 0x218, 0, };
|
||
/* NOTE: DMA is not autoprobed!!! */
|
||
static int dma[MAX_CARDS+1] = { 1, 7, 1, 7, 1, 7, 1, 7, 0, };
|
||
#else
|
||
static int io[MAX_CARDS+1];
|
||
static int dma[MAX_CARDS+1];
|
||
#endif
|
||
/* IRQ can be safely autoprobed */
|
||
static int irq[MAX_CARDS+1] = { -1, -1, -1, -1, -1, -1, 0, };
|
||
|
||
/* for class stuff*/
|
||
static struct class *cosa_class;
|
||
|
||
#ifdef MODULE
|
||
module_param_hw_array(io, int, ioport, NULL, 0);
|
||
MODULE_PARM_DESC(io, "The I/O bases of the COSA or SRP cards");
|
||
module_param_hw_array(irq, int, irq, NULL, 0);
|
||
MODULE_PARM_DESC(irq, "The IRQ lines of the COSA or SRP cards");
|
||
module_param_hw_array(dma, int, dma, NULL, 0);
|
||
MODULE_PARM_DESC(dma, "The DMA channels of the COSA or SRP cards");
|
||
|
||
MODULE_AUTHOR("Jan \"Yenya\" Kasprzak, <kas@fi.muni.cz>");
|
||
MODULE_DESCRIPTION("Modular driver for the COSA or SRP synchronous card");
|
||
MODULE_LICENSE("GPL");
|
||
#endif
|
||
|
||
/* I use this mainly for testing purposes */
|
||
#ifdef COSA_SLOW_IO
|
||
#define cosa_outb outb_p
|
||
#define cosa_outw outw_p
|
||
#define cosa_inb inb_p
|
||
#define cosa_inw inw_p
|
||
#else
|
||
#define cosa_outb outb
|
||
#define cosa_outw outw
|
||
#define cosa_inb inb
|
||
#define cosa_inw inw
|
||
#endif
|
||
|
||
#define is_8bit(cosa) (!(cosa->datareg & 0x08))
|
||
|
||
#define cosa_getstatus(cosa) (cosa_inb(cosa->statusreg))
|
||
#define cosa_putstatus(cosa, stat) (cosa_outb(stat, cosa->statusreg))
|
||
#define cosa_getdata16(cosa) (cosa_inw(cosa->datareg))
|
||
#define cosa_getdata8(cosa) (cosa_inb(cosa->datareg))
|
||
#define cosa_putdata16(cosa, dt) (cosa_outw(dt, cosa->datareg))
|
||
#define cosa_putdata8(cosa, dt) (cosa_outb(dt, cosa->datareg))
|
||
|
||
/* Initialization stuff */
|
||
static int cosa_probe(int ioaddr, int irq, int dma);
|
||
|
||
/* HW interface */
|
||
static void cosa_enable_rx(struct channel_data *chan);
|
||
static void cosa_disable_rx(struct channel_data *chan);
|
||
static int cosa_start_tx(struct channel_data *channel, char *buf, int size);
|
||
static void cosa_kick(struct cosa_data *cosa);
|
||
static int cosa_dma_able(struct channel_data *chan, char *buf, int data);
|
||
|
||
/* Network device stuff */
|
||
static int cosa_net_attach(struct net_device *dev, unsigned short encoding,
|
||
unsigned short parity);
|
||
static int cosa_net_open(struct net_device *d);
|
||
static int cosa_net_close(struct net_device *d);
|
||
static void cosa_net_timeout(struct net_device *d, unsigned int txqueue);
|
||
static netdev_tx_t cosa_net_tx(struct sk_buff *skb, struct net_device *d);
|
||
static char *cosa_net_setup_rx(struct channel_data *channel, int size);
|
||
static int cosa_net_rx_done(struct channel_data *channel);
|
||
static int cosa_net_tx_done(struct channel_data *channel, int size);
|
||
static int cosa_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
|
||
|
||
/* Character device */
|
||
static char *chrdev_setup_rx(struct channel_data *channel, int size);
|
||
static int chrdev_rx_done(struct channel_data *channel);
|
||
static int chrdev_tx_done(struct channel_data *channel, int size);
|
||
static ssize_t cosa_read(struct file *file,
|
||
char __user *buf, size_t count, loff_t *ppos);
|
||
static ssize_t cosa_write(struct file *file,
|
||
const char __user *buf, size_t count, loff_t *ppos);
|
||
static unsigned int cosa_poll(struct file *file, poll_table *poll);
|
||
static int cosa_open(struct inode *inode, struct file *file);
|
||
static int cosa_release(struct inode *inode, struct file *file);
|
||
static long cosa_chardev_ioctl(struct file *file, unsigned int cmd,
|
||
unsigned long arg);
|
||
#ifdef COSA_FASYNC_WORKING
|
||
static int cosa_fasync(struct inode *inode, struct file *file, int on);
|
||
#endif
|
||
|
||
static const struct file_operations cosa_fops = {
|
||
.owner = THIS_MODULE,
|
||
.llseek = no_llseek,
|
||
.read = cosa_read,
|
||
.write = cosa_write,
|
||
.poll = cosa_poll,
|
||
.unlocked_ioctl = cosa_chardev_ioctl,
|
||
.open = cosa_open,
|
||
.release = cosa_release,
|
||
#ifdef COSA_FASYNC_WORKING
|
||
.fasync = cosa_fasync,
|
||
#endif
|
||
};
|
||
|
||
/* Ioctls */
|
||
static int cosa_start(struct cosa_data *cosa, int address);
|
||
static int cosa_reset(struct cosa_data *cosa);
|
||
static int cosa_download(struct cosa_data *cosa, void __user *a);
|
||
static int cosa_readmem(struct cosa_data *cosa, void __user *a);
|
||
|
||
/* COSA/SRP ROM monitor */
|
||
static int download(struct cosa_data *cosa, const char __user *data, int addr, int len);
|
||
static int startmicrocode(struct cosa_data *cosa, int address);
|
||
static int readmem(struct cosa_data *cosa, char __user *data, int addr, int len);
|
||
static int cosa_reset_and_read_id(struct cosa_data *cosa, char *id);
|
||
|
||
/* Auxiliary functions */
|
||
static int get_wait_data(struct cosa_data *cosa);
|
||
static int put_wait_data(struct cosa_data *cosa, int data);
|
||
static int puthexnumber(struct cosa_data *cosa, int number);
|
||
static void put_driver_status(struct cosa_data *cosa);
|
||
static void put_driver_status_nolock(struct cosa_data *cosa);
|
||
|
||
/* Interrupt handling */
|
||
static irqreturn_t cosa_interrupt(int irq, void *cosa);
|
||
|
||
/* I/O ops debugging */
|
||
#ifdef DEBUG_IO
|
||
static void debug_data_in(struct cosa_data *cosa, int data);
|
||
static void debug_data_out(struct cosa_data *cosa, int data);
|
||
static void debug_data_cmd(struct cosa_data *cosa, int data);
|
||
static void debug_status_in(struct cosa_data *cosa, int status);
|
||
static void debug_status_out(struct cosa_data *cosa, int status);
|
||
#endif
|
||
|
||
static inline struct channel_data* dev_to_chan(struct net_device *dev)
|
||
{
|
||
return (struct channel_data *)dev_to_hdlc(dev)->priv;
|
||
}
|
||
|
||
/* ---------- Initialization stuff ---------- */
|
||
|
||
static int __init cosa_init(void)
|
||
{
|
||
int i, err = 0;
|
||
|
||
if (cosa_major > 0) {
|
||
if (register_chrdev(cosa_major, "cosa", &cosa_fops)) {
|
||
pr_warn("unable to get major %d\n", cosa_major);
|
||
err = -EIO;
|
||
goto out;
|
||
}
|
||
} else {
|
||
if (!(cosa_major=register_chrdev(0, "cosa", &cosa_fops))) {
|
||
pr_warn("unable to register chardev\n");
|
||
err = -EIO;
|
||
goto out;
|
||
}
|
||
}
|
||
for (i=0; i<MAX_CARDS; i++)
|
||
cosa_cards[i].num = -1;
|
||
for (i=0; io[i] != 0 && i < MAX_CARDS; i++)
|
||
cosa_probe(io[i], irq[i], dma[i]);
|
||
if (!nr_cards) {
|
||
pr_warn("no devices found\n");
|
||
unregister_chrdev(cosa_major, "cosa");
|
||
err = -ENODEV;
|
||
goto out;
|
||
}
|
||
cosa_class = class_create(THIS_MODULE, "cosa");
|
||
if (IS_ERR(cosa_class)) {
|
||
err = PTR_ERR(cosa_class);
|
||
goto out_chrdev;
|
||
}
|
||
for (i = 0; i < nr_cards; i++)
|
||
device_create(cosa_class, NULL, MKDEV(cosa_major, i), NULL,
|
||
"cosa%d", i);
|
||
err = 0;
|
||
goto out;
|
||
|
||
out_chrdev:
|
||
unregister_chrdev(cosa_major, "cosa");
|
||
out:
|
||
return err;
|
||
}
|
||
module_init(cosa_init);
|
||
|
||
static void __exit cosa_exit(void)
|
||
{
|
||
struct cosa_data *cosa;
|
||
int i;
|
||
|
||
for (i = 0; i < nr_cards; i++)
|
||
device_destroy(cosa_class, MKDEV(cosa_major, i));
|
||
class_destroy(cosa_class);
|
||
|
||
for (cosa = cosa_cards; nr_cards--; cosa++) {
|
||
/* Clean up the per-channel data */
|
||
for (i = 0; i < cosa->nchannels; i++) {
|
||
/* Chardev driver has no alloc'd per-channel data */
|
||
unregister_hdlc_device(cosa->chan[i].netdev);
|
||
free_netdev(cosa->chan[i].netdev);
|
||
}
|
||
/* Clean up the per-card data */
|
||
kfree(cosa->chan);
|
||
kfree(cosa->bouncebuf);
|
||
free_irq(cosa->irq, cosa);
|
||
free_dma(cosa->dma);
|
||
release_region(cosa->datareg, is_8bit(cosa) ? 2 : 4);
|
||
}
|
||
unregister_chrdev(cosa_major, "cosa");
|
||
}
|
||
module_exit(cosa_exit);
|
||
|
||
static const struct net_device_ops cosa_ops = {
|
||
.ndo_open = cosa_net_open,
|
||
.ndo_stop = cosa_net_close,
|
||
.ndo_start_xmit = hdlc_start_xmit,
|
||
.ndo_do_ioctl = cosa_net_ioctl,
|
||
.ndo_tx_timeout = cosa_net_timeout,
|
||
};
|
||
|
||
static int cosa_probe(int base, int irq, int dma)
|
||
{
|
||
struct cosa_data *cosa = cosa_cards+nr_cards;
|
||
int i, err = 0;
|
||
|
||
memset(cosa, 0, sizeof(struct cosa_data));
|
||
|
||
/* Checking validity of parameters: */
|
||
/* IRQ should be 2-7 or 10-15; negative IRQ means autoprobe */
|
||
if ((irq >= 0 && irq < 2) || irq > 15 || (irq < 10 && irq > 7)) {
|
||
pr_info("invalid IRQ %d\n", irq);
|
||
return -1;
|
||
}
|
||
/* I/O address should be between 0x100 and 0x3ff and should be
|
||
* multiple of 8. */
|
||
if (base < 0x100 || base > 0x3ff || base & 0x7) {
|
||
pr_info("invalid I/O address 0x%x\n", base);
|
||
return -1;
|
||
}
|
||
/* DMA should be 0,1 or 3-7 */
|
||
if (dma < 0 || dma == 4 || dma > 7) {
|
||
pr_info("invalid DMA %d\n", dma);
|
||
return -1;
|
||
}
|
||
/* and finally, on 16-bit COSA DMA should be 4-7 and
|
||
* I/O base should not be multiple of 0x10 */
|
||
if (((base & 0x8) && dma < 4) || (!(base & 0x8) && dma > 3)) {
|
||
pr_info("8/16 bit base and DMA mismatch (base=0x%x, dma=%d)\n",
|
||
base, dma);
|
||
return -1;
|
||
}
|
||
|
||
cosa->dma = dma;
|
||
cosa->datareg = base;
|
||
cosa->statusreg = is_8bit(cosa)?base+1:base+2;
|
||
spin_lock_init(&cosa->lock);
|
||
|
||
if (!request_region(base, is_8bit(cosa)?2:4,"cosa"))
|
||
return -1;
|
||
|
||
if (cosa_reset_and_read_id(cosa, cosa->id_string) < 0) {
|
||
printk(KERN_DEBUG "probe at 0x%x failed.\n", base);
|
||
err = -1;
|
||
goto err_out;
|
||
}
|
||
|
||
/* Test the validity of identification string */
|
||
if (!strncmp(cosa->id_string, "SRP", 3))
|
||
cosa->type = "srp";
|
||
else if (!strncmp(cosa->id_string, "COSA", 4))
|
||
cosa->type = is_8bit(cosa)? "cosa8": "cosa16";
|
||
else {
|
||
/* Print a warning only if we are not autoprobing */
|
||
#ifndef COSA_ISA_AUTOPROBE
|
||
pr_info("valid signature not found at 0x%x\n", base);
|
||
#endif
|
||
err = -1;
|
||
goto err_out;
|
||
}
|
||
/* Update the name of the region now we know the type of card */
|
||
release_region(base, is_8bit(cosa)?2:4);
|
||
if (!request_region(base, is_8bit(cosa)?2:4, cosa->type)) {
|
||
printk(KERN_DEBUG "changing name at 0x%x failed.\n", base);
|
||
return -1;
|
||
}
|
||
|
||
/* Now do IRQ autoprobe */
|
||
if (irq < 0) {
|
||
unsigned long irqs;
|
||
/* pr_info("IRQ autoprobe\n"); */
|
||
irqs = probe_irq_on();
|
||
/*
|
||
* Enable interrupt on tx buffer empty (it sure is)
|
||
* really sure ?
|
||
* FIXME: When this code is not used as module, we should
|
||
* probably call udelay() instead of the interruptible sleep.
|
||
*/
|
||
set_current_state(TASK_INTERRUPTIBLE);
|
||
cosa_putstatus(cosa, SR_TX_INT_ENA);
|
||
schedule_timeout(msecs_to_jiffies(300));
|
||
irq = probe_irq_off(irqs);
|
||
/* Disable all IRQs from the card */
|
||
cosa_putstatus(cosa, 0);
|
||
/* Empty the received data register */
|
||
cosa_getdata8(cosa);
|
||
|
||
if (irq < 0) {
|
||
pr_info("multiple interrupts obtained (%d, board at 0x%x)\n",
|
||
irq, cosa->datareg);
|
||
err = -1;
|
||
goto err_out;
|
||
}
|
||
if (irq == 0) {
|
||
pr_info("no interrupt obtained (board at 0x%x)\n",
|
||
cosa->datareg);
|
||
/* return -1; */
|
||
}
|
||
}
|
||
|
||
cosa->irq = irq;
|
||
cosa->num = nr_cards;
|
||
cosa->usage = 0;
|
||
cosa->nchannels = 2; /* FIXME: how to determine this? */
|
||
|
||
if (request_irq(cosa->irq, cosa_interrupt, 0, cosa->type, cosa)) {
|
||
err = -1;
|
||
goto err_out;
|
||
}
|
||
if (request_dma(cosa->dma, cosa->type)) {
|
||
err = -1;
|
||
goto err_out1;
|
||
}
|
||
|
||
cosa->bouncebuf = kmalloc(COSA_MTU, GFP_KERNEL|GFP_DMA);
|
||
if (!cosa->bouncebuf) {
|
||
err = -ENOMEM;
|
||
goto err_out2;
|
||
}
|
||
sprintf(cosa->name, "cosa%d", cosa->num);
|
||
|
||
/* Initialize the per-channel data */
|
||
cosa->chan = kcalloc(cosa->nchannels, sizeof(struct channel_data), GFP_KERNEL);
|
||
if (!cosa->chan) {
|
||
err = -ENOMEM;
|
||
goto err_out3;
|
||
}
|
||
|
||
for (i = 0; i < cosa->nchannels; i++) {
|
||
struct channel_data *chan = &cosa->chan[i];
|
||
|
||
chan->cosa = cosa;
|
||
chan->num = i;
|
||
sprintf(chan->name, "cosa%dc%d", chan->cosa->num, i);
|
||
|
||
/* Initialize the chardev data structures */
|
||
mutex_init(&chan->rlock);
|
||
sema_init(&chan->wsem, 1);
|
||
|
||
/* Register the network interface */
|
||
if (!(chan->netdev = alloc_hdlcdev(chan))) {
|
||
pr_warn("%s: alloc_hdlcdev failed\n", chan->name);
|
||
err = -ENOMEM;
|
||
goto err_hdlcdev;
|
||
}
|
||
dev_to_hdlc(chan->netdev)->attach = cosa_net_attach;
|
||
dev_to_hdlc(chan->netdev)->xmit = cosa_net_tx;
|
||
chan->netdev->netdev_ops = &cosa_ops;
|
||
chan->netdev->watchdog_timeo = TX_TIMEOUT;
|
||
chan->netdev->base_addr = chan->cosa->datareg;
|
||
chan->netdev->irq = chan->cosa->irq;
|
||
chan->netdev->dma = chan->cosa->dma;
|
||
err = register_hdlc_device(chan->netdev);
|
||
if (err) {
|
||
netdev_warn(chan->netdev,
|
||
"register_hdlc_device() failed\n");
|
||
free_netdev(chan->netdev);
|
||
goto err_hdlcdev;
|
||
}
|
||
}
|
||
|
||
pr_info("cosa%d: %s (%s at 0x%x irq %d dma %d), %d channels\n",
|
||
cosa->num, cosa->id_string, cosa->type,
|
||
cosa->datareg, cosa->irq, cosa->dma, cosa->nchannels);
|
||
|
||
return nr_cards++;
|
||
|
||
err_hdlcdev:
|
||
while (i-- > 0) {
|
||
unregister_hdlc_device(cosa->chan[i].netdev);
|
||
free_netdev(cosa->chan[i].netdev);
|
||
}
|
||
kfree(cosa->chan);
|
||
err_out3:
|
||
kfree(cosa->bouncebuf);
|
||
err_out2:
|
||
free_dma(cosa->dma);
|
||
err_out1:
|
||
free_irq(cosa->irq, cosa);
|
||
err_out:
|
||
release_region(cosa->datareg,is_8bit(cosa)?2:4);
|
||
pr_notice("cosa%d: allocating resources failed\n", cosa->num);
|
||
return err;
|
||
}
|
||
|
||
|
||
/*---------- network device ---------- */
|
||
|
||
static int cosa_net_attach(struct net_device *dev, unsigned short encoding,
|
||
unsigned short parity)
|
||
{
|
||
if (encoding == ENCODING_NRZ && parity == PARITY_CRC16_PR1_CCITT)
|
||
return 0;
|
||
return -EINVAL;
|
||
}
|
||
|
||
static int cosa_net_open(struct net_device *dev)
|
||
{
|
||
struct channel_data *chan = dev_to_chan(dev);
|
||
int err;
|
||
unsigned long flags;
|
||
|
||
if (!(chan->cosa->firmware_status & COSA_FW_START)) {
|
||
pr_notice("%s: start the firmware first (status %d)\n",
|
||
chan->cosa->name, chan->cosa->firmware_status);
|
||
return -EPERM;
|
||
}
|
||
spin_lock_irqsave(&chan->cosa->lock, flags);
|
||
if (chan->usage != 0) {
|
||
pr_warn("%s: cosa_net_open called with usage count %d\n",
|
||
chan->name, chan->usage);
|
||
spin_unlock_irqrestore(&chan->cosa->lock, flags);
|
||
return -EBUSY;
|
||
}
|
||
chan->setup_rx = cosa_net_setup_rx;
|
||
chan->tx_done = cosa_net_tx_done;
|
||
chan->rx_done = cosa_net_rx_done;
|
||
chan->usage = -1;
|
||
chan->cosa->usage++;
|
||
spin_unlock_irqrestore(&chan->cosa->lock, flags);
|
||
|
||
err = hdlc_open(dev);
|
||
if (err) {
|
||
spin_lock_irqsave(&chan->cosa->lock, flags);
|
||
chan->usage = 0;
|
||
chan->cosa->usage--;
|
||
spin_unlock_irqrestore(&chan->cosa->lock, flags);
|
||
return err;
|
||
}
|
||
|
||
netif_start_queue(dev);
|
||
cosa_enable_rx(chan);
|
||
return 0;
|
||
}
|
||
|
||
static netdev_tx_t cosa_net_tx(struct sk_buff *skb,
|
||
struct net_device *dev)
|
||
{
|
||
struct channel_data *chan = dev_to_chan(dev);
|
||
|
||
netif_stop_queue(dev);
|
||
|
||
chan->tx_skb = skb;
|
||
cosa_start_tx(chan, skb->data, skb->len);
|
||
return NETDEV_TX_OK;
|
||
}
|
||
|
||
static void cosa_net_timeout(struct net_device *dev, unsigned int txqueue)
|
||
{
|
||
struct channel_data *chan = dev_to_chan(dev);
|
||
|
||
if (test_bit(RXBIT, &chan->cosa->rxtx)) {
|
||
chan->netdev->stats.rx_errors++;
|
||
chan->netdev->stats.rx_missed_errors++;
|
||
} else {
|
||
chan->netdev->stats.tx_errors++;
|
||
chan->netdev->stats.tx_aborted_errors++;
|
||
}
|
||
cosa_kick(chan->cosa);
|
||
if (chan->tx_skb) {
|
||
dev_kfree_skb(chan->tx_skb);
|
||
chan->tx_skb = NULL;
|
||
}
|
||
netif_wake_queue(dev);
|
||
}
|
||
|
||
static int cosa_net_close(struct net_device *dev)
|
||
{
|
||
struct channel_data *chan = dev_to_chan(dev);
|
||
unsigned long flags;
|
||
|
||
netif_stop_queue(dev);
|
||
hdlc_close(dev);
|
||
cosa_disable_rx(chan);
|
||
spin_lock_irqsave(&chan->cosa->lock, flags);
|
||
if (chan->rx_skb) {
|
||
kfree_skb(chan->rx_skb);
|
||
chan->rx_skb = NULL;
|
||
}
|
||
if (chan->tx_skb) {
|
||
kfree_skb(chan->tx_skb);
|
||
chan->tx_skb = NULL;
|
||
}
|
||
chan->usage = 0;
|
||
chan->cosa->usage--;
|
||
spin_unlock_irqrestore(&chan->cosa->lock, flags);
|
||
return 0;
|
||
}
|
||
|
||
static char *cosa_net_setup_rx(struct channel_data *chan, int size)
|
||
{
|
||
/*
|
||
* We can safely fall back to non-dma-able memory, because we have
|
||
* the cosa->bouncebuf pre-allocated.
|
||
*/
|
||
kfree_skb(chan->rx_skb);
|
||
chan->rx_skb = dev_alloc_skb(size);
|
||
if (chan->rx_skb == NULL) {
|
||
pr_notice("%s: Memory squeeze, dropping packet\n", chan->name);
|
||
chan->netdev->stats.rx_dropped++;
|
||
return NULL;
|
||
}
|
||
netif_trans_update(chan->netdev);
|
||
return skb_put(chan->rx_skb, size);
|
||
}
|
||
|
||
static int cosa_net_rx_done(struct channel_data *chan)
|
||
{
|
||
if (!chan->rx_skb) {
|
||
pr_warn("%s: rx_done with empty skb!\n", chan->name);
|
||
chan->netdev->stats.rx_errors++;
|
||
chan->netdev->stats.rx_frame_errors++;
|
||
return 0;
|
||
}
|
||
chan->rx_skb->protocol = hdlc_type_trans(chan->rx_skb, chan->netdev);
|
||
chan->rx_skb->dev = chan->netdev;
|
||
skb_reset_mac_header(chan->rx_skb);
|
||
chan->netdev->stats.rx_packets++;
|
||
chan->netdev->stats.rx_bytes += chan->cosa->rxsize;
|
||
netif_rx(chan->rx_skb);
|
||
chan->rx_skb = NULL;
|
||
return 0;
|
||
}
|
||
|
||
/* ARGSUSED */
|
||
static int cosa_net_tx_done(struct channel_data *chan, int size)
|
||
{
|
||
if (!chan->tx_skb) {
|
||
pr_warn("%s: tx_done with empty skb!\n", chan->name);
|
||
chan->netdev->stats.tx_errors++;
|
||
chan->netdev->stats.tx_aborted_errors++;
|
||
return 1;
|
||
}
|
||
dev_consume_skb_irq(chan->tx_skb);
|
||
chan->tx_skb = NULL;
|
||
chan->netdev->stats.tx_packets++;
|
||
chan->netdev->stats.tx_bytes += size;
|
||
netif_wake_queue(chan->netdev);
|
||
return 1;
|
||
}
|
||
|
||
/*---------- Character device ---------- */
|
||
|
||
static ssize_t cosa_read(struct file *file,
|
||
char __user *buf, size_t count, loff_t *ppos)
|
||
{
|
||
DECLARE_WAITQUEUE(wait, current);
|
||
unsigned long flags;
|
||
struct channel_data *chan = file->private_data;
|
||
struct cosa_data *cosa = chan->cosa;
|
||
char *kbuf;
|
||
|
||
if (!(cosa->firmware_status & COSA_FW_START)) {
|
||
pr_notice("%s: start the firmware first (status %d)\n",
|
||
cosa->name, cosa->firmware_status);
|
||
return -EPERM;
|
||
}
|
||
if (mutex_lock_interruptible(&chan->rlock))
|
||
return -ERESTARTSYS;
|
||
|
||
chan->rxdata = kmalloc(COSA_MTU, GFP_DMA|GFP_KERNEL);
|
||
if (chan->rxdata == NULL) {
|
||
mutex_unlock(&chan->rlock);
|
||
return -ENOMEM;
|
||
}
|
||
|
||
chan->rx_status = 0;
|
||
cosa_enable_rx(chan);
|
||
spin_lock_irqsave(&cosa->lock, flags);
|
||
add_wait_queue(&chan->rxwaitq, &wait);
|
||
while (!chan->rx_status) {
|
||
set_current_state(TASK_INTERRUPTIBLE);
|
||
spin_unlock_irqrestore(&cosa->lock, flags);
|
||
schedule();
|
||
spin_lock_irqsave(&cosa->lock, flags);
|
||
if (signal_pending(current) && chan->rx_status == 0) {
|
||
chan->rx_status = 1;
|
||
remove_wait_queue(&chan->rxwaitq, &wait);
|
||
__set_current_state(TASK_RUNNING);
|
||
spin_unlock_irqrestore(&cosa->lock, flags);
|
||
mutex_unlock(&chan->rlock);
|
||
return -ERESTARTSYS;
|
||
}
|
||
}
|
||
remove_wait_queue(&chan->rxwaitq, &wait);
|
||
__set_current_state(TASK_RUNNING);
|
||
kbuf = chan->rxdata;
|
||
count = chan->rxsize;
|
||
spin_unlock_irqrestore(&cosa->lock, flags);
|
||
mutex_unlock(&chan->rlock);
|
||
|
||
if (copy_to_user(buf, kbuf, count)) {
|
||
kfree(kbuf);
|
||
return -EFAULT;
|
||
}
|
||
kfree(kbuf);
|
||
return count;
|
||
}
|
||
|
||
static char *chrdev_setup_rx(struct channel_data *chan, int size)
|
||
{
|
||
/* Expect size <= COSA_MTU */
|
||
chan->rxsize = size;
|
||
return chan->rxdata;
|
||
}
|
||
|
||
static int chrdev_rx_done(struct channel_data *chan)
|
||
{
|
||
if (chan->rx_status) { /* Reader has died */
|
||
kfree(chan->rxdata);
|
||
up(&chan->wsem);
|
||
}
|
||
chan->rx_status = 1;
|
||
wake_up_interruptible(&chan->rxwaitq);
|
||
return 1;
|
||
}
|
||
|
||
|
||
static ssize_t cosa_write(struct file *file,
|
||
const char __user *buf, size_t count, loff_t *ppos)
|
||
{
|
||
DECLARE_WAITQUEUE(wait, current);
|
||
struct channel_data *chan = file->private_data;
|
||
struct cosa_data *cosa = chan->cosa;
|
||
unsigned long flags;
|
||
char *kbuf;
|
||
|
||
if (!(cosa->firmware_status & COSA_FW_START)) {
|
||
pr_notice("%s: start the firmware first (status %d)\n",
|
||
cosa->name, cosa->firmware_status);
|
||
return -EPERM;
|
||
}
|
||
if (down_interruptible(&chan->wsem))
|
||
return -ERESTARTSYS;
|
||
|
||
if (count > COSA_MTU)
|
||
count = COSA_MTU;
|
||
|
||
/* Allocate the buffer */
|
||
kbuf = kmalloc(count, GFP_KERNEL|GFP_DMA);
|
||
if (kbuf == NULL) {
|
||
up(&chan->wsem);
|
||
return -ENOMEM;
|
||
}
|
||
if (copy_from_user(kbuf, buf, count)) {
|
||
up(&chan->wsem);
|
||
kfree(kbuf);
|
||
return -EFAULT;
|
||
}
|
||
chan->tx_status=0;
|
||
cosa_start_tx(chan, kbuf, count);
|
||
|
||
spin_lock_irqsave(&cosa->lock, flags);
|
||
add_wait_queue(&chan->txwaitq, &wait);
|
||
while (!chan->tx_status) {
|
||
set_current_state(TASK_INTERRUPTIBLE);
|
||
spin_unlock_irqrestore(&cosa->lock, flags);
|
||
schedule();
|
||
spin_lock_irqsave(&cosa->lock, flags);
|
||
if (signal_pending(current) && chan->tx_status == 0) {
|
||
chan->tx_status = 1;
|
||
remove_wait_queue(&chan->txwaitq, &wait);
|
||
__set_current_state(TASK_RUNNING);
|
||
chan->tx_status = 1;
|
||
spin_unlock_irqrestore(&cosa->lock, flags);
|
||
up(&chan->wsem);
|
||
return -ERESTARTSYS;
|
||
}
|
||
}
|
||
remove_wait_queue(&chan->txwaitq, &wait);
|
||
__set_current_state(TASK_RUNNING);
|
||
up(&chan->wsem);
|
||
spin_unlock_irqrestore(&cosa->lock, flags);
|
||
kfree(kbuf);
|
||
return count;
|
||
}
|
||
|
||
static int chrdev_tx_done(struct channel_data *chan, int size)
|
||
{
|
||
if (chan->tx_status) { /* Writer was interrupted */
|
||
kfree(chan->txbuf);
|
||
up(&chan->wsem);
|
||
}
|
||
chan->tx_status = 1;
|
||
wake_up_interruptible(&chan->txwaitq);
|
||
return 1;
|
||
}
|
||
|
||
static __poll_t cosa_poll(struct file *file, poll_table *poll)
|
||
{
|
||
pr_info("cosa_poll is here\n");
|
||
return 0;
|
||
}
|
||
|
||
static int cosa_open(struct inode *inode, struct file *file)
|
||
{
|
||
struct cosa_data *cosa;
|
||
struct channel_data *chan;
|
||
unsigned long flags;
|
||
int n;
|
||
int ret = 0;
|
||
|
||
mutex_lock(&cosa_chardev_mutex);
|
||
if ((n=iminor(file_inode(file))>>CARD_MINOR_BITS)
|
||
>= nr_cards) {
|
||
ret = -ENODEV;
|
||
goto out;
|
||
}
|
||
cosa = cosa_cards+n;
|
||
|
||
if ((n=iminor(file_inode(file))
|
||
& ((1<<CARD_MINOR_BITS)-1)) >= cosa->nchannels) {
|
||
ret = -ENODEV;
|
||
goto out;
|
||
}
|
||
chan = cosa->chan + n;
|
||
|
||
file->private_data = chan;
|
||
|
||
spin_lock_irqsave(&cosa->lock, flags);
|
||
|
||
if (chan->usage < 0) { /* in netdev mode */
|
||
spin_unlock_irqrestore(&cosa->lock, flags);
|
||
ret = -EBUSY;
|
||
goto out;
|
||
}
|
||
cosa->usage++;
|
||
chan->usage++;
|
||
|
||
chan->tx_done = chrdev_tx_done;
|
||
chan->setup_rx = chrdev_setup_rx;
|
||
chan->rx_done = chrdev_rx_done;
|
||
spin_unlock_irqrestore(&cosa->lock, flags);
|
||
out:
|
||
mutex_unlock(&cosa_chardev_mutex);
|
||
return ret;
|
||
}
|
||
|
||
static int cosa_release(struct inode *inode, struct file *file)
|
||
{
|
||
struct channel_data *channel = file->private_data;
|
||
struct cosa_data *cosa;
|
||
unsigned long flags;
|
||
|
||
cosa = channel->cosa;
|
||
spin_lock_irqsave(&cosa->lock, flags);
|
||
cosa->usage--;
|
||
channel->usage--;
|
||
spin_unlock_irqrestore(&cosa->lock, flags);
|
||
return 0;
|
||
}
|
||
|
||
#ifdef COSA_FASYNC_WORKING
|
||
static struct fasync_struct *fasync[256] = { NULL, };
|
||
|
||
/* To be done ... */
|
||
static int cosa_fasync(struct inode *inode, struct file *file, int on)
|
||
{
|
||
int port = iminor(inode);
|
||
|
||
return fasync_helper(inode, file, on, &fasync[port]);
|
||
}
|
||
#endif
|
||
|
||
|
||
/* ---------- Ioctls ---------- */
|
||
|
||
/*
|
||
* Ioctl subroutines can safely be made inline, because they are called
|
||
* only from cosa_ioctl().
|
||
*/
|
||
static inline int cosa_reset(struct cosa_data *cosa)
|
||
{
|
||
char idstring[COSA_MAX_ID_STRING];
|
||
if (cosa->usage > 1)
|
||
pr_info("cosa%d: WARNING: reset requested with cosa->usage > 1 (%d). Odd things may happen.\n",
|
||
cosa->num, cosa->usage);
|
||
cosa->firmware_status &= ~(COSA_FW_RESET|COSA_FW_START);
|
||
if (cosa_reset_and_read_id(cosa, idstring) < 0) {
|
||
pr_notice("cosa%d: reset failed\n", cosa->num);
|
||
return -EIO;
|
||
}
|
||
pr_info("cosa%d: resetting device: %s\n", cosa->num, idstring);
|
||
cosa->firmware_status |= COSA_FW_RESET;
|
||
return 0;
|
||
}
|
||
|
||
/* High-level function to download data into COSA memory. Calls download() */
|
||
static inline int cosa_download(struct cosa_data *cosa, void __user *arg)
|
||
{
|
||
struct cosa_download d;
|
||
int i;
|
||
|
||
if (cosa->usage > 1)
|
||
pr_info("%s: WARNING: download of microcode requested with cosa->usage > 1 (%d). Odd things may happen.\n",
|
||
cosa->name, cosa->usage);
|
||
if (!(cosa->firmware_status & COSA_FW_RESET)) {
|
||
pr_notice("%s: reset the card first (status %d)\n",
|
||
cosa->name, cosa->firmware_status);
|
||
return -EPERM;
|
||
}
|
||
|
||
if (copy_from_user(&d, arg, sizeof(d)))
|
||
return -EFAULT;
|
||
|
||
if (d.addr < 0 || d.addr > COSA_MAX_FIRMWARE_SIZE)
|
||
return -EINVAL;
|
||
if (d.len < 0 || d.len > COSA_MAX_FIRMWARE_SIZE)
|
||
return -EINVAL;
|
||
|
||
|
||
/* If something fails, force the user to reset the card */
|
||
cosa->firmware_status &= ~(COSA_FW_RESET|COSA_FW_DOWNLOAD);
|
||
|
||
i = download(cosa, d.code, d.len, d.addr);
|
||
if (i < 0) {
|
||
pr_notice("cosa%d: microcode download failed: %d\n",
|
||
cosa->num, i);
|
||
return -EIO;
|
||
}
|
||
pr_info("cosa%d: downloading microcode - 0x%04x bytes at 0x%04x\n",
|
||
cosa->num, d.len, d.addr);
|
||
cosa->firmware_status |= COSA_FW_RESET|COSA_FW_DOWNLOAD;
|
||
return 0;
|
||
}
|
||
|
||
/* High-level function to read COSA memory. Calls readmem() */
|
||
static inline int cosa_readmem(struct cosa_data *cosa, void __user *arg)
|
||
{
|
||
struct cosa_download d;
|
||
int i;
|
||
|
||
if (cosa->usage > 1)
|
||
pr_info("cosa%d: WARNING: readmem requested with cosa->usage > 1 (%d). Odd things may happen.\n",
|
||
cosa->num, cosa->usage);
|
||
if (!(cosa->firmware_status & COSA_FW_RESET)) {
|
||
pr_notice("%s: reset the card first (status %d)\n",
|
||
cosa->name, cosa->firmware_status);
|
||
return -EPERM;
|
||
}
|
||
|
||
if (copy_from_user(&d, arg, sizeof(d)))
|
||
return -EFAULT;
|
||
|
||
/* If something fails, force the user to reset the card */
|
||
cosa->firmware_status &= ~COSA_FW_RESET;
|
||
|
||
i = readmem(cosa, d.code, d.len, d.addr);
|
||
if (i < 0) {
|
||
pr_notice("cosa%d: reading memory failed: %d\n", cosa->num, i);
|
||
return -EIO;
|
||
}
|
||
pr_info("cosa%d: reading card memory - 0x%04x bytes at 0x%04x\n",
|
||
cosa->num, d.len, d.addr);
|
||
cosa->firmware_status |= COSA_FW_RESET;
|
||
return 0;
|
||
}
|
||
|
||
/* High-level function to start microcode. Calls startmicrocode(). */
|
||
static inline int cosa_start(struct cosa_data *cosa, int address)
|
||
{
|
||
int i;
|
||
|
||
if (cosa->usage > 1)
|
||
pr_info("cosa%d: WARNING: start microcode requested with cosa->usage > 1 (%d). Odd things may happen.\n",
|
||
cosa->num, cosa->usage);
|
||
|
||
if ((cosa->firmware_status & (COSA_FW_RESET|COSA_FW_DOWNLOAD))
|
||
!= (COSA_FW_RESET|COSA_FW_DOWNLOAD)) {
|
||
pr_notice("%s: download the microcode and/or reset the card first (status %d)\n",
|
||
cosa->name, cosa->firmware_status);
|
||
return -EPERM;
|
||
}
|
||
cosa->firmware_status &= ~COSA_FW_RESET;
|
||
if ((i=startmicrocode(cosa, address)) < 0) {
|
||
pr_notice("cosa%d: start microcode at 0x%04x failed: %d\n",
|
||
cosa->num, address, i);
|
||
return -EIO;
|
||
}
|
||
pr_info("cosa%d: starting microcode at 0x%04x\n", cosa->num, address);
|
||
cosa->startaddr = address;
|
||
cosa->firmware_status |= COSA_FW_START;
|
||
return 0;
|
||
}
|
||
|
||
/* Buffer of size at least COSA_MAX_ID_STRING is expected */
|
||
static inline int cosa_getidstr(struct cosa_data *cosa, char __user *string)
|
||
{
|
||
int l = strlen(cosa->id_string)+1;
|
||
if (copy_to_user(string, cosa->id_string, l))
|
||
return -EFAULT;
|
||
return l;
|
||
}
|
||
|
||
/* Buffer of size at least COSA_MAX_ID_STRING is expected */
|
||
static inline int cosa_gettype(struct cosa_data *cosa, char __user *string)
|
||
{
|
||
int l = strlen(cosa->type)+1;
|
||
if (copy_to_user(string, cosa->type, l))
|
||
return -EFAULT;
|
||
return l;
|
||
}
|
||
|
||
static int cosa_ioctl_common(struct cosa_data *cosa,
|
||
struct channel_data *channel, unsigned int cmd, unsigned long arg)
|
||
{
|
||
void __user *argp = (void __user *)arg;
|
||
switch (cmd) {
|
||
case COSAIORSET: /* Reset the device */
|
||
if (!capable(CAP_NET_ADMIN))
|
||
return -EACCES;
|
||
return cosa_reset(cosa);
|
||
case COSAIOSTRT: /* Start the firmware */
|
||
if (!capable(CAP_SYS_RAWIO))
|
||
return -EACCES;
|
||
return cosa_start(cosa, arg);
|
||
case COSAIODOWNLD: /* Download the firmware */
|
||
if (!capable(CAP_SYS_RAWIO))
|
||
return -EACCES;
|
||
|
||
return cosa_download(cosa, argp);
|
||
case COSAIORMEM:
|
||
if (!capable(CAP_SYS_RAWIO))
|
||
return -EACCES;
|
||
return cosa_readmem(cosa, argp);
|
||
case COSAIORTYPE:
|
||
return cosa_gettype(cosa, argp);
|
||
case COSAIORIDSTR:
|
||
return cosa_getidstr(cosa, argp);
|
||
case COSAIONRCARDS:
|
||
return nr_cards;
|
||
case COSAIONRCHANS:
|
||
return cosa->nchannels;
|
||
case COSAIOBMSET:
|
||
if (!capable(CAP_SYS_RAWIO))
|
||
return -EACCES;
|
||
if (is_8bit(cosa))
|
||
return -EINVAL;
|
||
if (arg != COSA_BM_OFF && arg != COSA_BM_ON)
|
||
return -EINVAL;
|
||
cosa->busmaster = arg;
|
||
return 0;
|
||
case COSAIOBMGET:
|
||
return cosa->busmaster;
|
||
}
|
||
return -ENOIOCTLCMD;
|
||
}
|
||
|
||
static int cosa_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
|
||
{
|
||
int rv;
|
||
struct channel_data *chan = dev_to_chan(dev);
|
||
rv = cosa_ioctl_common(chan->cosa, chan, cmd,
|
||
(unsigned long)ifr->ifr_data);
|
||
if (rv != -ENOIOCTLCMD)
|
||
return rv;
|
||
return hdlc_ioctl(dev, ifr, cmd);
|
||
}
|
||
|
||
static long cosa_chardev_ioctl(struct file *file, unsigned int cmd,
|
||
unsigned long arg)
|
||
{
|
||
struct channel_data *channel = file->private_data;
|
||
struct cosa_data *cosa;
|
||
long ret;
|
||
|
||
mutex_lock(&cosa_chardev_mutex);
|
||
cosa = channel->cosa;
|
||
ret = cosa_ioctl_common(cosa, channel, cmd, arg);
|
||
mutex_unlock(&cosa_chardev_mutex);
|
||
return ret;
|
||
}
|
||
|
||
|
||
/*---------- HW layer interface ---------- */
|
||
|
||
/*
|
||
* The higher layer can bind itself to the HW layer by setting the callbacks
|
||
* in the channel_data structure and by using these routines.
|
||
*/
|
||
static void cosa_enable_rx(struct channel_data *chan)
|
||
{
|
||
struct cosa_data *cosa = chan->cosa;
|
||
|
||
if (!test_and_set_bit(chan->num, &cosa->rxbitmap))
|
||
put_driver_status(cosa);
|
||
}
|
||
|
||
static void cosa_disable_rx(struct channel_data *chan)
|
||
{
|
||
struct cosa_data *cosa = chan->cosa;
|
||
|
||
if (test_and_clear_bit(chan->num, &cosa->rxbitmap))
|
||
put_driver_status(cosa);
|
||
}
|
||
|
||
/*
|
||
* FIXME: This routine probably should check for cosa_start_tx() called when
|
||
* the previous transmit is still unfinished. In this case the non-zero
|
||
* return value should indicate to the caller that the queuing(sp?) up
|
||
* the transmit has failed.
|
||
*/
|
||
static int cosa_start_tx(struct channel_data *chan, char *buf, int len)
|
||
{
|
||
struct cosa_data *cosa = chan->cosa;
|
||
unsigned long flags;
|
||
#ifdef DEBUG_DATA
|
||
int i;
|
||
|
||
pr_info("cosa%dc%d: starting tx(0x%x)",
|
||
chan->cosa->num, chan->num, len);
|
||
for (i=0; i<len; i++)
|
||
pr_cont(" %02x", buf[i]&0xff);
|
||
pr_cont("\n");
|
||
#endif
|
||
spin_lock_irqsave(&cosa->lock, flags);
|
||
chan->txbuf = buf;
|
||
chan->txsize = len;
|
||
if (len > COSA_MTU)
|
||
chan->txsize = COSA_MTU;
|
||
spin_unlock_irqrestore(&cosa->lock, flags);
|
||
|
||
/* Tell the firmware we are ready */
|
||
set_bit(chan->num, &cosa->txbitmap);
|
||
put_driver_status(cosa);
|
||
|
||
return 0;
|
||
}
|
||
|
||
static void put_driver_status(struct cosa_data *cosa)
|
||
{
|
||
unsigned long flags;
|
||
int status;
|
||
|
||
spin_lock_irqsave(&cosa->lock, flags);
|
||
|
||
status = (cosa->rxbitmap ? DRIVER_RX_READY : 0)
|
||
| (cosa->txbitmap ? DRIVER_TX_READY : 0)
|
||
| (cosa->txbitmap? ~(cosa->txbitmap<<DRIVER_TXMAP_SHIFT)
|
||
&DRIVER_TXMAP_MASK : 0);
|
||
if (!cosa->rxtx) {
|
||
if (cosa->rxbitmap|cosa->txbitmap) {
|
||
if (!cosa->enabled) {
|
||
cosa_putstatus(cosa, SR_RX_INT_ENA);
|
||
#ifdef DEBUG_IO
|
||
debug_status_out(cosa, SR_RX_INT_ENA);
|
||
#endif
|
||
cosa->enabled = 1;
|
||
}
|
||
} else if (cosa->enabled) {
|
||
cosa->enabled = 0;
|
||
cosa_putstatus(cosa, 0);
|
||
#ifdef DEBUG_IO
|
||
debug_status_out(cosa, 0);
|
||
#endif
|
||
}
|
||
cosa_putdata8(cosa, status);
|
||
#ifdef DEBUG_IO
|
||
debug_data_cmd(cosa, status);
|
||
#endif
|
||
}
|
||
spin_unlock_irqrestore(&cosa->lock, flags);
|
||
}
|
||
|
||
static void put_driver_status_nolock(struct cosa_data *cosa)
|
||
{
|
||
int status;
|
||
|
||
status = (cosa->rxbitmap ? DRIVER_RX_READY : 0)
|
||
| (cosa->txbitmap ? DRIVER_TX_READY : 0)
|
||
| (cosa->txbitmap? ~(cosa->txbitmap<<DRIVER_TXMAP_SHIFT)
|
||
&DRIVER_TXMAP_MASK : 0);
|
||
|
||
if (cosa->rxbitmap|cosa->txbitmap) {
|
||
cosa_putstatus(cosa, SR_RX_INT_ENA);
|
||
#ifdef DEBUG_IO
|
||
debug_status_out(cosa, SR_RX_INT_ENA);
|
||
#endif
|
||
cosa->enabled = 1;
|
||
} else {
|
||
cosa_putstatus(cosa, 0);
|
||
#ifdef DEBUG_IO
|
||
debug_status_out(cosa, 0);
|
||
#endif
|
||
cosa->enabled = 0;
|
||
}
|
||
cosa_putdata8(cosa, status);
|
||
#ifdef DEBUG_IO
|
||
debug_data_cmd(cosa, status);
|
||
#endif
|
||
}
|
||
|
||
/*
|
||
* The "kickme" function: When the DMA times out, this is called to
|
||
* clean up the driver status.
|
||
* FIXME: Preliminary support, the interface is probably wrong.
|
||
*/
|
||
static void cosa_kick(struct cosa_data *cosa)
|
||
{
|
||
unsigned long flags, flags1;
|
||
char *s = "(probably) IRQ";
|
||
|
||
if (test_bit(RXBIT, &cosa->rxtx))
|
||
s = "RX DMA";
|
||
if (test_bit(TXBIT, &cosa->rxtx))
|
||
s = "TX DMA";
|
||
|
||
pr_info("%s: %s timeout - restarting\n", cosa->name, s);
|
||
spin_lock_irqsave(&cosa->lock, flags);
|
||
cosa->rxtx = 0;
|
||
|
||
flags1 = claim_dma_lock();
|
||
disable_dma(cosa->dma);
|
||
clear_dma_ff(cosa->dma);
|
||
release_dma_lock(flags1);
|
||
|
||
/* FIXME: Anything else? */
|
||
udelay(100);
|
||
cosa_putstatus(cosa, 0);
|
||
udelay(100);
|
||
(void) cosa_getdata8(cosa);
|
||
udelay(100);
|
||
cosa_putdata8(cosa, 0);
|
||
udelay(100);
|
||
put_driver_status_nolock(cosa);
|
||
spin_unlock_irqrestore(&cosa->lock, flags);
|
||
}
|
||
|
||
/*
|
||
* Check if the whole buffer is DMA-able. It means it is below the 16M of
|
||
* physical memory and doesn't span the 64k boundary. For now it seems
|
||
* SKB's never do this, but we'll check this anyway.
|
||
*/
|
||
static int cosa_dma_able(struct channel_data *chan, char *buf, int len)
|
||
{
|
||
static int count;
|
||
unsigned long b = (unsigned long)buf;
|
||
if (b+len >= MAX_DMA_ADDRESS)
|
||
return 0;
|
||
if ((b^ (b+len)) & 0x10000) {
|
||
if (count++ < 5)
|
||
pr_info("%s: packet spanning a 64k boundary\n",
|
||
chan->name);
|
||
return 0;
|
||
}
|
||
return 1;
|
||
}
|
||
|
||
|
||
/* ---------- The SRP/COSA ROM monitor functions ---------- */
|
||
|
||
/*
|
||
* Downloading SRP microcode: say "w" to SRP monitor, it answers by "w=",
|
||
* drivers need to say 4-digit hex number meaning start address of the microcode
|
||
* separated by a single space. Monitor replies by saying " =". Now driver
|
||
* has to write 4-digit hex number meaning the last byte address ended
|
||
* by a single space. Monitor has to reply with a space. Now the download
|
||
* begins. After the download monitor replies with "\r\n." (CR LF dot).
|
||
*/
|
||
static int download(struct cosa_data *cosa, const char __user *microcode, int length, int address)
|
||
{
|
||
int i;
|
||
|
||
if (put_wait_data(cosa, 'w') == -1) return -1;
|
||
if ((i=get_wait_data(cosa)) != 'w') { printk("dnld: 0x%04x\n",i); return -2;}
|
||
if (get_wait_data(cosa) != '=') return -3;
|
||
|
||
if (puthexnumber(cosa, address) < 0) return -4;
|
||
if (put_wait_data(cosa, ' ') == -1) return -10;
|
||
if (get_wait_data(cosa) != ' ') return -11;
|
||
if (get_wait_data(cosa) != '=') return -12;
|
||
|
||
if (puthexnumber(cosa, address+length-1) < 0) return -13;
|
||
if (put_wait_data(cosa, ' ') == -1) return -18;
|
||
if (get_wait_data(cosa) != ' ') return -19;
|
||
|
||
while (length--) {
|
||
char c;
|
||
#ifndef SRP_DOWNLOAD_AT_BOOT
|
||
if (get_user(c, microcode))
|
||
return -23; /* ??? */
|
||
#else
|
||
c = *microcode;
|
||
#endif
|
||
if (put_wait_data(cosa, c) == -1)
|
||
return -20;
|
||
microcode++;
|
||
}
|
||
|
||
if (get_wait_data(cosa) != '\r') return -21;
|
||
if (get_wait_data(cosa) != '\n') return -22;
|
||
if (get_wait_data(cosa) != '.') return -23;
|
||
#if 0
|
||
printk(KERN_DEBUG "cosa%d: download completed.\n", cosa->num);
|
||
#endif
|
||
return 0;
|
||
}
|
||
|
||
|
||
/*
|
||
* Starting microcode is done via the "g" command of the SRP monitor.
|
||
* The chat should be the following: "g" "g=" "<addr><CR>"
|
||
* "<CR><CR><LF><CR><LF>".
|
||
*/
|
||
static int startmicrocode(struct cosa_data *cosa, int address)
|
||
{
|
||
if (put_wait_data(cosa, 'g') == -1) return -1;
|
||
if (get_wait_data(cosa) != 'g') return -2;
|
||
if (get_wait_data(cosa) != '=') return -3;
|
||
|
||
if (puthexnumber(cosa, address) < 0) return -4;
|
||
if (put_wait_data(cosa, '\r') == -1) return -5;
|
||
|
||
if (get_wait_data(cosa) != '\r') return -6;
|
||
if (get_wait_data(cosa) != '\r') return -7;
|
||
if (get_wait_data(cosa) != '\n') return -8;
|
||
if (get_wait_data(cosa) != '\r') return -9;
|
||
if (get_wait_data(cosa) != '\n') return -10;
|
||
#if 0
|
||
printk(KERN_DEBUG "cosa%d: microcode started\n", cosa->num);
|
||
#endif
|
||
return 0;
|
||
}
|
||
|
||
/*
|
||
* Reading memory is done via the "r" command of the SRP monitor.
|
||
* The chat is the following "r" "r=" "<addr> " " =" "<last_byte> " " "
|
||
* Then driver can read the data and the conversation is finished
|
||
* by SRP monitor sending "<CR><LF>." (dot at the end).
|
||
*
|
||
* This routine is not needed during the normal operation and serves
|
||
* for debugging purposes only.
|
||
*/
|
||
static int readmem(struct cosa_data *cosa, char __user *microcode, int length, int address)
|
||
{
|
||
if (put_wait_data(cosa, 'r') == -1) return -1;
|
||
if ((get_wait_data(cosa)) != 'r') return -2;
|
||
if ((get_wait_data(cosa)) != '=') return -3;
|
||
|
||
if (puthexnumber(cosa, address) < 0) return -4;
|
||
if (put_wait_data(cosa, ' ') == -1) return -5;
|
||
if (get_wait_data(cosa) != ' ') return -6;
|
||
if (get_wait_data(cosa) != '=') return -7;
|
||
|
||
if (puthexnumber(cosa, address+length-1) < 0) return -8;
|
||
if (put_wait_data(cosa, ' ') == -1) return -9;
|
||
if (get_wait_data(cosa) != ' ') return -10;
|
||
|
||
while (length--) {
|
||
char c;
|
||
int i;
|
||
if ((i=get_wait_data(cosa)) == -1) {
|
||
pr_info("0x%04x bytes remaining\n", length);
|
||
return -11;
|
||
}
|
||
c=i;
|
||
#if 1
|
||
if (put_user(c, microcode))
|
||
return -23; /* ??? */
|
||
#else
|
||
*microcode = c;
|
||
#endif
|
||
microcode++;
|
||
}
|
||
|
||
if (get_wait_data(cosa) != '\r') return -21;
|
||
if (get_wait_data(cosa) != '\n') return -22;
|
||
if (get_wait_data(cosa) != '.') return -23;
|
||
#if 0
|
||
printk(KERN_DEBUG "cosa%d: readmem completed.\n", cosa->num);
|
||
#endif
|
||
return 0;
|
||
}
|
||
|
||
/*
|
||
* This function resets the device and reads the initial prompt
|
||
* of the device's ROM monitor.
|
||
*/
|
||
static int cosa_reset_and_read_id(struct cosa_data *cosa, char *idstring)
|
||
{
|
||
int i=0, id=0, prev=0, curr=0;
|
||
|
||
/* Reset the card ... */
|
||
cosa_putstatus(cosa, 0);
|
||
cosa_getdata8(cosa);
|
||
cosa_putstatus(cosa, SR_RST);
|
||
msleep(500);
|
||
/* Disable all IRQs from the card */
|
||
cosa_putstatus(cosa, 0);
|
||
|
||
/*
|
||
* Try to read the ID string. The card then prints out the
|
||
* identification string ended by the "\n\x2e".
|
||
*
|
||
* The following loop is indexed through i (instead of id)
|
||
* to avoid looping forever when for any reason
|
||
* the port returns '\r', '\n' or '\x2e' permanently.
|
||
*/
|
||
for (i=0; i<COSA_MAX_ID_STRING-1; i++, prev=curr) {
|
||
if ((curr = get_wait_data(cosa)) == -1) {
|
||
return -1;
|
||
}
|
||
curr &= 0xff;
|
||
if (curr != '\r' && curr != '\n' && curr != 0x2e)
|
||
idstring[id++] = curr;
|
||
if (curr == 0x2e && prev == '\n')
|
||
break;
|
||
}
|
||
/* Perhaps we should fail when i==COSA_MAX_ID_STRING-1 ? */
|
||
idstring[id] = '\0';
|
||
return id;
|
||
}
|
||
|
||
|
||
/* ---------- Auxiliary routines for COSA/SRP monitor ---------- */
|
||
|
||
/*
|
||
* This routine gets the data byte from the card waiting for the SR_RX_RDY
|
||
* bit to be set in a loop. It should be used in the exceptional cases
|
||
* only (for example when resetting the card or downloading the firmware.
|
||
*/
|
||
static int get_wait_data(struct cosa_data *cosa)
|
||
{
|
||
int retries = 1000;
|
||
|
||
while (--retries) {
|
||
/* read data and return them */
|
||
if (cosa_getstatus(cosa) & SR_RX_RDY) {
|
||
short r;
|
||
r = cosa_getdata8(cosa);
|
||
#if 0
|
||
pr_info("get_wait_data returning after %d retries\n",
|
||
999-retries);
|
||
#endif
|
||
return r;
|
||
}
|
||
/* sleep if not ready to read */
|
||
schedule_timeout_interruptible(1);
|
||
}
|
||
pr_info("timeout in get_wait_data (status 0x%x)\n",
|
||
cosa_getstatus(cosa));
|
||
return -1;
|
||
}
|
||
|
||
/*
|
||
* This routine puts the data byte to the card waiting for the SR_TX_RDY
|
||
* bit to be set in a loop. It should be used in the exceptional cases
|
||
* only (for example when resetting the card or downloading the firmware).
|
||
*/
|
||
static int put_wait_data(struct cosa_data *cosa, int data)
|
||
{
|
||
int retries = 1000;
|
||
while (--retries) {
|
||
/* read data and return them */
|
||
if (cosa_getstatus(cosa) & SR_TX_RDY) {
|
||
cosa_putdata8(cosa, data);
|
||
#if 0
|
||
pr_info("Putdata: %d retries\n", 999-retries);
|
||
#endif
|
||
return 0;
|
||
}
|
||
#if 0
|
||
/* sleep if not ready to read */
|
||
schedule_timeout_interruptible(1);
|
||
#endif
|
||
}
|
||
pr_info("cosa%d: timeout in put_wait_data (status 0x%x)\n",
|
||
cosa->num, cosa_getstatus(cosa));
|
||
return -1;
|
||
}
|
||
|
||
/*
|
||
* The following routine puts the hexadecimal number into the SRP monitor
|
||
* and verifies the proper echo of the sent bytes. Returns 0 on success,
|
||
* negative number on failure (-1,-3,-5,-7) means that put_wait_data() failed,
|
||
* (-2,-4,-6,-8) means that reading echo failed.
|
||
*/
|
||
static int puthexnumber(struct cosa_data *cosa, int number)
|
||
{
|
||
char temp[5];
|
||
int i;
|
||
|
||
/* Well, I should probably replace this by something faster. */
|
||
sprintf(temp, "%04X", number);
|
||
for (i=0; i<4; i++) {
|
||
if (put_wait_data(cosa, temp[i]) == -1) {
|
||
pr_notice("cosa%d: puthexnumber failed to write byte %d\n",
|
||
cosa->num, i);
|
||
return -1-2*i;
|
||
}
|
||
if (get_wait_data(cosa) != temp[i]) {
|
||
pr_notice("cosa%d: puthexhumber failed to read echo of byte %d\n",
|
||
cosa->num, i);
|
||
return -2-2*i;
|
||
}
|
||
}
|
||
return 0;
|
||
}
|
||
|
||
|
||
/* ---------- Interrupt routines ---------- */
|
||
|
||
/*
|
||
* There are three types of interrupt:
|
||
* At the beginning of transmit - this handled is in tx_interrupt(),
|
||
* at the beginning of receive - it is in rx_interrupt() and
|
||
* at the end of transmit/receive - it is the eot_interrupt() function.
|
||
* These functions are multiplexed by cosa_interrupt() according to the
|
||
* COSA status byte. I have moved the rx/tx/eot interrupt handling into
|
||
* separate functions to make it more readable. These functions are inline,
|
||
* so there should be no overhead of function call.
|
||
*
|
||
* In the COSA bus-master mode, we need to tell the card the address of a
|
||
* buffer. Unfortunately, COSA may be too slow for us, so we must busy-wait.
|
||
* It's time to use the bottom half :-(
|
||
*/
|
||
|
||
/*
|
||
* Transmit interrupt routine - called when COSA is willing to obtain
|
||
* data from the OS. The most tricky part of the routine is selection
|
||
* of channel we (OS) want to send packet for. For SRP we should probably
|
||
* use the round-robin approach. The newer COSA firmwares have a simple
|
||
* flow-control - in the status word has bits 2 and 3 set to 1 means that the
|
||
* channel 0 or 1 doesn't want to receive data.
|
||
*
|
||
* It seems there is a bug in COSA firmware (need to trace it further):
|
||
* When the driver status says that the kernel has no more data for transmit
|
||
* (e.g. at the end of TX DMA) and then the kernel changes its mind
|
||
* (e.g. new packet is queued to hard_start_xmit()), the card issues
|
||
* the TX interrupt but does not mark the channel as ready-to-transmit.
|
||
* The fix seems to be to push the packet to COSA despite its request.
|
||
* We first try to obey the card's opinion, and then fall back to forced TX.
|
||
*/
|
||
static inline void tx_interrupt(struct cosa_data *cosa, int status)
|
||
{
|
||
unsigned long flags, flags1;
|
||
#ifdef DEBUG_IRQS
|
||
pr_info("cosa%d: SR_DOWN_REQUEST status=0x%04x\n", cosa->num, status);
|
||
#endif
|
||
spin_lock_irqsave(&cosa->lock, flags);
|
||
set_bit(TXBIT, &cosa->rxtx);
|
||
if (!test_bit(IRQBIT, &cosa->rxtx)) {
|
||
/* flow control, see the comment above */
|
||
int i=0;
|
||
if (!cosa->txbitmap) {
|
||
pr_warn("%s: No channel wants data in TX IRQ. Expect DMA timeout.\n",
|
||
cosa->name);
|
||
put_driver_status_nolock(cosa);
|
||
clear_bit(TXBIT, &cosa->rxtx);
|
||
spin_unlock_irqrestore(&cosa->lock, flags);
|
||
return;
|
||
}
|
||
while (1) {
|
||
cosa->txchan++;
|
||
i++;
|
||
if (cosa->txchan >= cosa->nchannels)
|
||
cosa->txchan = 0;
|
||
if (!(cosa->txbitmap & (1<<cosa->txchan)))
|
||
continue;
|
||
if (~status & (1 << (cosa->txchan+DRIVER_TXMAP_SHIFT)))
|
||
break;
|
||
/* in second pass, accept first ready-to-TX channel */
|
||
if (i > cosa->nchannels) {
|
||
/* Can be safely ignored */
|
||
#ifdef DEBUG_IRQS
|
||
printk(KERN_DEBUG "%s: Forcing TX "
|
||
"to not-ready channel %d\n",
|
||
cosa->name, cosa->txchan);
|
||
#endif
|
||
break;
|
||
}
|
||
}
|
||
|
||
cosa->txsize = cosa->chan[cosa->txchan].txsize;
|
||
if (cosa_dma_able(cosa->chan+cosa->txchan,
|
||
cosa->chan[cosa->txchan].txbuf, cosa->txsize)) {
|
||
cosa->txbuf = cosa->chan[cosa->txchan].txbuf;
|
||
} else {
|
||
memcpy(cosa->bouncebuf, cosa->chan[cosa->txchan].txbuf,
|
||
cosa->txsize);
|
||
cosa->txbuf = cosa->bouncebuf;
|
||
}
|
||
}
|
||
|
||
if (is_8bit(cosa)) {
|
||
if (!test_bit(IRQBIT, &cosa->rxtx)) {
|
||
cosa_putstatus(cosa, SR_TX_INT_ENA);
|
||
cosa_putdata8(cosa, ((cosa->txchan << 5) & 0xe0)|
|
||
((cosa->txsize >> 8) & 0x1f));
|
||
#ifdef DEBUG_IO
|
||
debug_status_out(cosa, SR_TX_INT_ENA);
|
||
debug_data_out(cosa, ((cosa->txchan << 5) & 0xe0)|
|
||
((cosa->txsize >> 8) & 0x1f));
|
||
debug_data_in(cosa, cosa_getdata8(cosa));
|
||
#else
|
||
cosa_getdata8(cosa);
|
||
#endif
|
||
set_bit(IRQBIT, &cosa->rxtx);
|
||
spin_unlock_irqrestore(&cosa->lock, flags);
|
||
return;
|
||
} else {
|
||
clear_bit(IRQBIT, &cosa->rxtx);
|
||
cosa_putstatus(cosa, 0);
|
||
cosa_putdata8(cosa, cosa->txsize&0xff);
|
||
#ifdef DEBUG_IO
|
||
debug_status_out(cosa, 0);
|
||
debug_data_out(cosa, cosa->txsize&0xff);
|
||
#endif
|
||
}
|
||
} else {
|
||
cosa_putstatus(cosa, SR_TX_INT_ENA);
|
||
cosa_putdata16(cosa, ((cosa->txchan<<13) & 0xe000)
|
||
| (cosa->txsize & 0x1fff));
|
||
#ifdef DEBUG_IO
|
||
debug_status_out(cosa, SR_TX_INT_ENA);
|
||
debug_data_out(cosa, ((cosa->txchan<<13) & 0xe000)
|
||
| (cosa->txsize & 0x1fff));
|
||
debug_data_in(cosa, cosa_getdata8(cosa));
|
||
debug_status_out(cosa, 0);
|
||
#else
|
||
cosa_getdata8(cosa);
|
||
#endif
|
||
cosa_putstatus(cosa, 0);
|
||
}
|
||
|
||
if (cosa->busmaster) {
|
||
unsigned long addr = virt_to_bus(cosa->txbuf);
|
||
int count=0;
|
||
pr_info("busmaster IRQ\n");
|
||
while (!(cosa_getstatus(cosa)&SR_TX_RDY)) {
|
||
count++;
|
||
udelay(10);
|
||
if (count > 1000) break;
|
||
}
|
||
pr_info("status %x\n", cosa_getstatus(cosa));
|
||
pr_info("ready after %d loops\n", count);
|
||
cosa_putdata16(cosa, (addr >> 16)&0xffff);
|
||
|
||
count = 0;
|
||
while (!(cosa_getstatus(cosa)&SR_TX_RDY)) {
|
||
count++;
|
||
if (count > 1000) break;
|
||
udelay(10);
|
||
}
|
||
pr_info("ready after %d loops\n", count);
|
||
cosa_putdata16(cosa, addr &0xffff);
|
||
flags1 = claim_dma_lock();
|
||
set_dma_mode(cosa->dma, DMA_MODE_CASCADE);
|
||
enable_dma(cosa->dma);
|
||
release_dma_lock(flags1);
|
||
} else {
|
||
/* start the DMA */
|
||
flags1 = claim_dma_lock();
|
||
disable_dma(cosa->dma);
|
||
clear_dma_ff(cosa->dma);
|
||
set_dma_mode(cosa->dma, DMA_MODE_WRITE);
|
||
set_dma_addr(cosa->dma, virt_to_bus(cosa->txbuf));
|
||
set_dma_count(cosa->dma, cosa->txsize);
|
||
enable_dma(cosa->dma);
|
||
release_dma_lock(flags1);
|
||
}
|
||
cosa_putstatus(cosa, SR_TX_DMA_ENA|SR_USR_INT_ENA);
|
||
#ifdef DEBUG_IO
|
||
debug_status_out(cosa, SR_TX_DMA_ENA|SR_USR_INT_ENA);
|
||
#endif
|
||
spin_unlock_irqrestore(&cosa->lock, flags);
|
||
}
|
||
|
||
static inline void rx_interrupt(struct cosa_data *cosa, int status)
|
||
{
|
||
unsigned long flags;
|
||
#ifdef DEBUG_IRQS
|
||
pr_info("cosa%d: SR_UP_REQUEST\n", cosa->num);
|
||
#endif
|
||
|
||
spin_lock_irqsave(&cosa->lock, flags);
|
||
set_bit(RXBIT, &cosa->rxtx);
|
||
|
||
if (is_8bit(cosa)) {
|
||
if (!test_bit(IRQBIT, &cosa->rxtx)) {
|
||
set_bit(IRQBIT, &cosa->rxtx);
|
||
put_driver_status_nolock(cosa);
|
||
cosa->rxsize = cosa_getdata8(cosa) <<8;
|
||
#ifdef DEBUG_IO
|
||
debug_data_in(cosa, cosa->rxsize >> 8);
|
||
#endif
|
||
spin_unlock_irqrestore(&cosa->lock, flags);
|
||
return;
|
||
} else {
|
||
clear_bit(IRQBIT, &cosa->rxtx);
|
||
cosa->rxsize |= cosa_getdata8(cosa) & 0xff;
|
||
#ifdef DEBUG_IO
|
||
debug_data_in(cosa, cosa->rxsize & 0xff);
|
||
#endif
|
||
#if 0
|
||
pr_info("cosa%d: receive rxsize = (0x%04x)\n",
|
||
cosa->num, cosa->rxsize);
|
||
#endif
|
||
}
|
||
} else {
|
||
cosa->rxsize = cosa_getdata16(cosa);
|
||
#ifdef DEBUG_IO
|
||
debug_data_in(cosa, cosa->rxsize);
|
||
#endif
|
||
#if 0
|
||
pr_info("cosa%d: receive rxsize = (0x%04x)\n",
|
||
cosa->num, cosa->rxsize);
|
||
#endif
|
||
}
|
||
if (((cosa->rxsize & 0xe000) >> 13) >= cosa->nchannels) {
|
||
pr_warn("%s: rx for unknown channel (0x%04x)\n",
|
||
cosa->name, cosa->rxsize);
|
||
spin_unlock_irqrestore(&cosa->lock, flags);
|
||
goto reject;
|
||
}
|
||
cosa->rxchan = cosa->chan + ((cosa->rxsize & 0xe000) >> 13);
|
||
cosa->rxsize &= 0x1fff;
|
||
spin_unlock_irqrestore(&cosa->lock, flags);
|
||
|
||
cosa->rxbuf = NULL;
|
||
if (cosa->rxchan->setup_rx)
|
||
cosa->rxbuf = cosa->rxchan->setup_rx(cosa->rxchan, cosa->rxsize);
|
||
|
||
if (!cosa->rxbuf) {
|
||
reject: /* Reject the packet */
|
||
pr_info("cosa%d: rejecting packet on channel %d\n",
|
||
cosa->num, cosa->rxchan->num);
|
||
cosa->rxbuf = cosa->bouncebuf;
|
||
}
|
||
|
||
/* start the DMA */
|
||
flags = claim_dma_lock();
|
||
disable_dma(cosa->dma);
|
||
clear_dma_ff(cosa->dma);
|
||
set_dma_mode(cosa->dma, DMA_MODE_READ);
|
||
if (cosa_dma_able(cosa->rxchan, cosa->rxbuf, cosa->rxsize & 0x1fff)) {
|
||
set_dma_addr(cosa->dma, virt_to_bus(cosa->rxbuf));
|
||
} else {
|
||
set_dma_addr(cosa->dma, virt_to_bus(cosa->bouncebuf));
|
||
}
|
||
set_dma_count(cosa->dma, (cosa->rxsize&0x1fff));
|
||
enable_dma(cosa->dma);
|
||
release_dma_lock(flags);
|
||
spin_lock_irqsave(&cosa->lock, flags);
|
||
cosa_putstatus(cosa, SR_RX_DMA_ENA|SR_USR_INT_ENA);
|
||
if (!is_8bit(cosa) && (status & SR_TX_RDY))
|
||
cosa_putdata8(cosa, DRIVER_RX_READY);
|
||
#ifdef DEBUG_IO
|
||
debug_status_out(cosa, SR_RX_DMA_ENA|SR_USR_INT_ENA);
|
||
if (!is_8bit(cosa) && (status & SR_TX_RDY))
|
||
debug_data_cmd(cosa, DRIVER_RX_READY);
|
||
#endif
|
||
spin_unlock_irqrestore(&cosa->lock, flags);
|
||
}
|
||
|
||
static inline void eot_interrupt(struct cosa_data *cosa, int status)
|
||
{
|
||
unsigned long flags, flags1;
|
||
spin_lock_irqsave(&cosa->lock, flags);
|
||
flags1 = claim_dma_lock();
|
||
disable_dma(cosa->dma);
|
||
clear_dma_ff(cosa->dma);
|
||
release_dma_lock(flags1);
|
||
if (test_bit(TXBIT, &cosa->rxtx)) {
|
||
struct channel_data *chan = cosa->chan+cosa->txchan;
|
||
if (chan->tx_done)
|
||
if (chan->tx_done(chan, cosa->txsize))
|
||
clear_bit(chan->num, &cosa->txbitmap);
|
||
} else if (test_bit(RXBIT, &cosa->rxtx)) {
|
||
#ifdef DEBUG_DATA
|
||
{
|
||
int i;
|
||
pr_info("cosa%dc%d: done rx(0x%x)",
|
||
cosa->num, cosa->rxchan->num, cosa->rxsize);
|
||
for (i=0; i<cosa->rxsize; i++)
|
||
pr_cont(" %02x", cosa->rxbuf[i]&0xff);
|
||
pr_cont("\n");
|
||
}
|
||
#endif
|
||
/* Packet for unknown channel? */
|
||
if (cosa->rxbuf == cosa->bouncebuf)
|
||
goto out;
|
||
if (!cosa_dma_able(cosa->rxchan, cosa->rxbuf, cosa->rxsize))
|
||
memcpy(cosa->rxbuf, cosa->bouncebuf, cosa->rxsize);
|
||
if (cosa->rxchan->rx_done)
|
||
if (cosa->rxchan->rx_done(cosa->rxchan))
|
||
clear_bit(cosa->rxchan->num, &cosa->rxbitmap);
|
||
} else {
|
||
pr_notice("cosa%d: unexpected EOT interrupt\n", cosa->num);
|
||
}
|
||
/*
|
||
* Clear the RXBIT, TXBIT and IRQBIT (the latest should be
|
||
* cleared anyway). We should do it as soon as possible
|
||
* so that we can tell the COSA we are done and to give it a time
|
||
* for recovery.
|
||
*/
|
||
out:
|
||
cosa->rxtx = 0;
|
||
put_driver_status_nolock(cosa);
|
||
spin_unlock_irqrestore(&cosa->lock, flags);
|
||
}
|
||
|
||
static irqreturn_t cosa_interrupt(int irq, void *cosa_)
|
||
{
|
||
unsigned status;
|
||
int count = 0;
|
||
struct cosa_data *cosa = cosa_;
|
||
again:
|
||
status = cosa_getstatus(cosa);
|
||
#ifdef DEBUG_IRQS
|
||
pr_info("cosa%d: got IRQ, status 0x%02x\n", cosa->num, status & 0xff);
|
||
#endif
|
||
#ifdef DEBUG_IO
|
||
debug_status_in(cosa, status);
|
||
#endif
|
||
switch (status & SR_CMD_FROM_SRP_MASK) {
|
||
case SR_DOWN_REQUEST:
|
||
tx_interrupt(cosa, status);
|
||
break;
|
||
case SR_UP_REQUEST:
|
||
rx_interrupt(cosa, status);
|
||
break;
|
||
case SR_END_OF_TRANSFER:
|
||
eot_interrupt(cosa, status);
|
||
break;
|
||
default:
|
||
/* We may be too fast for SRP. Try to wait a bit more. */
|
||
if (count++ < 100) {
|
||
udelay(100);
|
||
goto again;
|
||
}
|
||
pr_info("cosa%d: unknown status 0x%02x in IRQ after %d retries\n",
|
||
cosa->num, status & 0xff, count);
|
||
}
|
||
#ifdef DEBUG_IRQS
|
||
if (count)
|
||
pr_info("%s: %d-times got unknown status in IRQ\n",
|
||
cosa->name, count);
|
||
else
|
||
pr_info("%s: returning from IRQ\n", cosa->name);
|
||
#endif
|
||
return IRQ_HANDLED;
|
||
}
|
||
|
||
|
||
/* ---------- I/O debugging routines ---------- */
|
||
/*
|
||
* These routines can be used to monitor COSA/SRP I/O and to printk()
|
||
* the data being transferred on the data and status I/O port in a
|
||
* readable way.
|
||
*/
|
||
|
||
#ifdef DEBUG_IO
|
||
static void debug_status_in(struct cosa_data *cosa, int status)
|
||
{
|
||
char *s;
|
||
switch (status & SR_CMD_FROM_SRP_MASK) {
|
||
case SR_UP_REQUEST:
|
||
s = "RX_REQ";
|
||
break;
|
||
case SR_DOWN_REQUEST:
|
||
s = "TX_REQ";
|
||
break;
|
||
case SR_END_OF_TRANSFER:
|
||
s = "ET_REQ";
|
||
break;
|
||
default:
|
||
s = "NO_REQ";
|
||
break;
|
||
}
|
||
pr_info("%s: IO: status -> 0x%02x (%s%s%s%s)\n",
|
||
cosa->name,
|
||
status,
|
||
status & SR_USR_RQ ? "USR_RQ|" : "",
|
||
status & SR_TX_RDY ? "TX_RDY|" : "",
|
||
status & SR_RX_RDY ? "RX_RDY|" : "",
|
||
s);
|
||
}
|
||
|
||
static void debug_status_out(struct cosa_data *cosa, int status)
|
||
{
|
||
pr_info("%s: IO: status <- 0x%02x (%s%s%s%s%s%s)\n",
|
||
cosa->name,
|
||
status,
|
||
status & SR_RX_DMA_ENA ? "RXDMA|" : "!rxdma|",
|
||
status & SR_TX_DMA_ENA ? "TXDMA|" : "!txdma|",
|
||
status & SR_RST ? "RESET|" : "",
|
||
status & SR_USR_INT_ENA ? "USRINT|" : "!usrint|",
|
||
status & SR_TX_INT_ENA ? "TXINT|" : "!txint|",
|
||
status & SR_RX_INT_ENA ? "RXINT" : "!rxint");
|
||
}
|
||
|
||
static void debug_data_in(struct cosa_data *cosa, int data)
|
||
{
|
||
pr_info("%s: IO: data -> 0x%04x\n", cosa->name, data);
|
||
}
|
||
|
||
static void debug_data_out(struct cosa_data *cosa, int data)
|
||
{
|
||
pr_info("%s: IO: data <- 0x%04x\n", cosa->name, data);
|
||
}
|
||
|
||
static void debug_data_cmd(struct cosa_data *cosa, int data)
|
||
{
|
||
pr_info("%s: IO: data <- 0x%04x (%s|%s)\n",
|
||
cosa->name, data,
|
||
data & SR_RDY_RCV ? "RX_RDY" : "!rx_rdy",
|
||
data & SR_RDY_SND ? "TX_RDY" : "!tx_rdy");
|
||
}
|
||
#endif
|
||
|
||
/* EOF -- this file has not been truncated */
|