306 lines
8.5 KiB
C
306 lines
8.5 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
// Copyright (C) 2008-2009 The GameCube Linux Team
|
|
// Copyright (C) 2008,2009 Albert Herranz
|
|
// Copyright (C) 2017-2018 Jonathan Neuschäfer
|
|
//
|
|
// Nintendo Wii (Hollywood) GPIO driver
|
|
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/slab.h>
|
|
|
|
/*
|
|
* Register names and offsets courtesy of WiiBrew:
|
|
* https://wiibrew.org/wiki/Hardware/Hollywood_GPIOs
|
|
*
|
|
* Note that for most registers, there are two versions:
|
|
* - HW_GPIOB_* Is always accessible by the Broadway PowerPC core, but does
|
|
* always give access to all GPIO lines
|
|
* - HW_GPIO_* Is only accessible by the Broadway PowerPC code if the memory
|
|
* firewall (AHBPROT) in the Hollywood chipset has been configured to allow
|
|
* such access.
|
|
*
|
|
* The ownership of each GPIO line can be configured in the HW_GPIO_OWNER
|
|
* register: A one bit configures the line for access via the HW_GPIOB_*
|
|
* registers, a zero bit indicates access via HW_GPIO_*. This driver uses
|
|
* HW_GPIOB_*.
|
|
*/
|
|
#define HW_GPIOB_OUT 0x00
|
|
#define HW_GPIOB_DIR 0x04
|
|
#define HW_GPIOB_IN 0x08
|
|
#define HW_GPIOB_INTLVL 0x0c
|
|
#define HW_GPIOB_INTFLAG 0x10
|
|
#define HW_GPIOB_INTMASK 0x14
|
|
#define HW_GPIOB_INMIR 0x18
|
|
#define HW_GPIO_ENABLE 0x1c
|
|
#define HW_GPIO_OUT 0x20
|
|
#define HW_GPIO_DIR 0x24
|
|
#define HW_GPIO_IN 0x28
|
|
#define HW_GPIO_INTLVL 0x2c
|
|
#define HW_GPIO_INTFLAG 0x30
|
|
#define HW_GPIO_INTMASK 0x34
|
|
#define HW_GPIO_INMIR 0x38
|
|
#define HW_GPIO_OWNER 0x3c
|
|
|
|
struct hlwd_gpio {
|
|
struct gpio_chip gpioc;
|
|
struct irq_chip irqc;
|
|
void __iomem *regs;
|
|
int irq;
|
|
u32 edge_emulation;
|
|
u32 rising_edge, falling_edge;
|
|
};
|
|
|
|
static void hlwd_gpio_irqhandler(struct irq_desc *desc)
|
|
{
|
|
struct hlwd_gpio *hlwd =
|
|
gpiochip_get_data(irq_desc_get_handler_data(desc));
|
|
struct irq_chip *chip = irq_desc_get_chip(desc);
|
|
unsigned long flags;
|
|
unsigned long pending;
|
|
int hwirq;
|
|
u32 emulated_pending;
|
|
|
|
spin_lock_irqsave(&hlwd->gpioc.bgpio_lock, flags);
|
|
pending = ioread32be(hlwd->regs + HW_GPIOB_INTFLAG);
|
|
pending &= ioread32be(hlwd->regs + HW_GPIOB_INTMASK);
|
|
|
|
/* Treat interrupts due to edge trigger emulation separately */
|
|
emulated_pending = hlwd->edge_emulation & pending;
|
|
pending &= ~emulated_pending;
|
|
if (emulated_pending) {
|
|
u32 level, rising, falling;
|
|
|
|
level = ioread32be(hlwd->regs + HW_GPIOB_INTLVL);
|
|
rising = level & emulated_pending;
|
|
falling = ~level & emulated_pending;
|
|
|
|
/* Invert the levels */
|
|
iowrite32be(level ^ emulated_pending,
|
|
hlwd->regs + HW_GPIOB_INTLVL);
|
|
|
|
/* Ack all emulated-edge interrupts */
|
|
iowrite32be(emulated_pending, hlwd->regs + HW_GPIOB_INTFLAG);
|
|
|
|
/* Signal interrupts only on the correct edge */
|
|
rising &= hlwd->rising_edge;
|
|
falling &= hlwd->falling_edge;
|
|
|
|
/* Mark emulated interrupts as pending */
|
|
pending |= rising | falling;
|
|
}
|
|
spin_unlock_irqrestore(&hlwd->gpioc.bgpio_lock, flags);
|
|
|
|
chained_irq_enter(chip, desc);
|
|
|
|
for_each_set_bit(hwirq, &pending, 32) {
|
|
int irq = irq_find_mapping(hlwd->gpioc.irq.domain, hwirq);
|
|
|
|
generic_handle_irq(irq);
|
|
}
|
|
|
|
chained_irq_exit(chip, desc);
|
|
}
|
|
|
|
static void hlwd_gpio_irq_ack(struct irq_data *data)
|
|
{
|
|
struct hlwd_gpio *hlwd =
|
|
gpiochip_get_data(irq_data_get_irq_chip_data(data));
|
|
|
|
iowrite32be(BIT(data->hwirq), hlwd->regs + HW_GPIOB_INTFLAG);
|
|
}
|
|
|
|
static void hlwd_gpio_irq_mask(struct irq_data *data)
|
|
{
|
|
struct hlwd_gpio *hlwd =
|
|
gpiochip_get_data(irq_data_get_irq_chip_data(data));
|
|
unsigned long flags;
|
|
u32 mask;
|
|
|
|
spin_lock_irqsave(&hlwd->gpioc.bgpio_lock, flags);
|
|
mask = ioread32be(hlwd->regs + HW_GPIOB_INTMASK);
|
|
mask &= ~BIT(data->hwirq);
|
|
iowrite32be(mask, hlwd->regs + HW_GPIOB_INTMASK);
|
|
spin_unlock_irqrestore(&hlwd->gpioc.bgpio_lock, flags);
|
|
}
|
|
|
|
static void hlwd_gpio_irq_unmask(struct irq_data *data)
|
|
{
|
|
struct hlwd_gpio *hlwd =
|
|
gpiochip_get_data(irq_data_get_irq_chip_data(data));
|
|
unsigned long flags;
|
|
u32 mask;
|
|
|
|
spin_lock_irqsave(&hlwd->gpioc.bgpio_lock, flags);
|
|
mask = ioread32be(hlwd->regs + HW_GPIOB_INTMASK);
|
|
mask |= BIT(data->hwirq);
|
|
iowrite32be(mask, hlwd->regs + HW_GPIOB_INTMASK);
|
|
spin_unlock_irqrestore(&hlwd->gpioc.bgpio_lock, flags);
|
|
}
|
|
|
|
static void hlwd_gpio_irq_enable(struct irq_data *data)
|
|
{
|
|
hlwd_gpio_irq_ack(data);
|
|
hlwd_gpio_irq_unmask(data);
|
|
}
|
|
|
|
static void hlwd_gpio_irq_setup_emulation(struct hlwd_gpio *hlwd, int hwirq,
|
|
unsigned int flow_type)
|
|
{
|
|
u32 level, state;
|
|
|
|
/* Set the trigger level to the inactive level */
|
|
level = ioread32be(hlwd->regs + HW_GPIOB_INTLVL);
|
|
state = ioread32be(hlwd->regs + HW_GPIOB_IN) & BIT(hwirq);
|
|
level &= ~BIT(hwirq);
|
|
level |= state ^ BIT(hwirq);
|
|
iowrite32be(level, hlwd->regs + HW_GPIOB_INTLVL);
|
|
|
|
hlwd->edge_emulation |= BIT(hwirq);
|
|
hlwd->rising_edge &= ~BIT(hwirq);
|
|
hlwd->falling_edge &= ~BIT(hwirq);
|
|
if (flow_type & IRQ_TYPE_EDGE_RISING)
|
|
hlwd->rising_edge |= BIT(hwirq);
|
|
if (flow_type & IRQ_TYPE_EDGE_FALLING)
|
|
hlwd->falling_edge |= BIT(hwirq);
|
|
}
|
|
|
|
static int hlwd_gpio_irq_set_type(struct irq_data *data, unsigned int flow_type)
|
|
{
|
|
struct hlwd_gpio *hlwd =
|
|
gpiochip_get_data(irq_data_get_irq_chip_data(data));
|
|
unsigned long flags;
|
|
u32 level;
|
|
|
|
spin_lock_irqsave(&hlwd->gpioc.bgpio_lock, flags);
|
|
|
|
hlwd->edge_emulation &= ~BIT(data->hwirq);
|
|
|
|
switch (flow_type) {
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
level = ioread32be(hlwd->regs + HW_GPIOB_INTLVL);
|
|
level |= BIT(data->hwirq);
|
|
iowrite32be(level, hlwd->regs + HW_GPIOB_INTLVL);
|
|
break;
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
level = ioread32be(hlwd->regs + HW_GPIOB_INTLVL);
|
|
level &= ~BIT(data->hwirq);
|
|
iowrite32be(level, hlwd->regs + HW_GPIOB_INTLVL);
|
|
break;
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
hlwd_gpio_irq_setup_emulation(hlwd, data->hwirq, flow_type);
|
|
break;
|
|
default:
|
|
spin_unlock_irqrestore(&hlwd->gpioc.bgpio_lock, flags);
|
|
return -EINVAL;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&hlwd->gpioc.bgpio_lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
static int hlwd_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct hlwd_gpio *hlwd;
|
|
u32 ngpios;
|
|
int res;
|
|
|
|
hlwd = devm_kzalloc(&pdev->dev, sizeof(*hlwd), GFP_KERNEL);
|
|
if (!hlwd)
|
|
return -ENOMEM;
|
|
|
|
hlwd->regs = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(hlwd->regs))
|
|
return PTR_ERR(hlwd->regs);
|
|
|
|
/*
|
|
* Claim all GPIOs using the OWNER register. This will not work on
|
|
* systems where the AHBPROT memory firewall hasn't been configured to
|
|
* permit PPC access to HW_GPIO_*.
|
|
*
|
|
* Note that this has to happen before bgpio_init reads the
|
|
* HW_GPIOB_OUT and HW_GPIOB_DIR, because otherwise it reads the wrong
|
|
* values.
|
|
*/
|
|
iowrite32be(0xffffffff, hlwd->regs + HW_GPIO_OWNER);
|
|
|
|
res = bgpio_init(&hlwd->gpioc, &pdev->dev, 4,
|
|
hlwd->regs + HW_GPIOB_IN, hlwd->regs + HW_GPIOB_OUT,
|
|
NULL, hlwd->regs + HW_GPIOB_DIR, NULL,
|
|
BGPIOF_BIG_ENDIAN_BYTE_ORDER);
|
|
if (res < 0) {
|
|
dev_warn(&pdev->dev, "bgpio_init failed: %d\n", res);
|
|
return res;
|
|
}
|
|
|
|
res = of_property_read_u32(pdev->dev.of_node, "ngpios", &ngpios);
|
|
if (res)
|
|
ngpios = 32;
|
|
hlwd->gpioc.ngpio = ngpios;
|
|
|
|
/* Mask and ack all interrupts */
|
|
iowrite32be(0, hlwd->regs + HW_GPIOB_INTMASK);
|
|
iowrite32be(0xffffffff, hlwd->regs + HW_GPIOB_INTFLAG);
|
|
|
|
/*
|
|
* If this GPIO controller is not marked as an interrupt controller in
|
|
* the DT, skip interrupt support.
|
|
*/
|
|
if (of_property_read_bool(pdev->dev.of_node, "interrupt-controller")) {
|
|
struct gpio_irq_chip *girq;
|
|
|
|
hlwd->irq = platform_get_irq(pdev, 0);
|
|
if (hlwd->irq < 0) {
|
|
dev_info(&pdev->dev, "platform_get_irq returned %d\n",
|
|
hlwd->irq);
|
|
return hlwd->irq;
|
|
}
|
|
|
|
hlwd->irqc.name = dev_name(&pdev->dev);
|
|
hlwd->irqc.irq_mask = hlwd_gpio_irq_mask;
|
|
hlwd->irqc.irq_unmask = hlwd_gpio_irq_unmask;
|
|
hlwd->irqc.irq_enable = hlwd_gpio_irq_enable;
|
|
hlwd->irqc.irq_set_type = hlwd_gpio_irq_set_type;
|
|
|
|
girq = &hlwd->gpioc.irq;
|
|
girq->chip = &hlwd->irqc;
|
|
girq->parent_handler = hlwd_gpio_irqhandler;
|
|
girq->num_parents = 1;
|
|
girq->parents = devm_kcalloc(&pdev->dev, 1,
|
|
sizeof(*girq->parents),
|
|
GFP_KERNEL);
|
|
if (!girq->parents)
|
|
return -ENOMEM;
|
|
girq->parents[0] = hlwd->irq;
|
|
girq->default_type = IRQ_TYPE_NONE;
|
|
girq->handler = handle_level_irq;
|
|
}
|
|
|
|
return devm_gpiochip_add_data(&pdev->dev, &hlwd->gpioc, hlwd);
|
|
}
|
|
|
|
static const struct of_device_id hlwd_gpio_match[] = {
|
|
{ .compatible = "nintendo,hollywood-gpio", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, hlwd_gpio_match);
|
|
|
|
static struct platform_driver hlwd_gpio_driver = {
|
|
.driver = {
|
|
.name = "gpio-hlwd",
|
|
.of_match_table = hlwd_gpio_match,
|
|
},
|
|
.probe = hlwd_gpio_probe,
|
|
};
|
|
module_platform_driver(hlwd_gpio_driver);
|
|
|
|
MODULE_AUTHOR("Jonathan Neuschäfer <j.neuschaefer@gmx.net>");
|
|
MODULE_DESCRIPTION("Nintendo Wii GPIO driver");
|
|
MODULE_LICENSE("GPL");
|