linux-sg2042/arch/mips/sgi-ip27/ip27-xtalk.c

136 lines
3.0 KiB
C

/*
* Copyright (C) 1999, 2000 Ralf Baechle (ralf@gnu.org)
* Copyright (C) 1999, 2000 Silcon Graphics, Inc.
* Copyright (C) 2004 Christoph Hellwig.
* Released under GPL v2.
*
* Generic XTALK initialization code
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <asm/sn/types.h>
#include <asm/sn/klconfig.h>
#include <asm/sn/hub.h>
#include <asm/pci/bridge.h>
#include <asm/xtalk/xtalk.h>
#define XBOW_WIDGET_PART_NUM 0x0
#define XXBOW_WIDGET_PART_NUM 0xd000 /* Xbow in Xbridge */
#define BASE_XBOW_PORT 8 /* Lowest external port */
extern int bridge_probe(nasid_t nasid, int widget, int masterwid);
static int __init probe_one_port(nasid_t nasid, int widget, int masterwid)
{
widgetreg_t widget_id;
xwidget_part_num_t partnum;
widget_id = *(volatile widgetreg_t *)
(RAW_NODE_SWIN_BASE(nasid, widget) + WIDGET_ID);
partnum = XWIDGET_PART_NUM(widget_id);
printk(KERN_INFO "Cpu %d, Nasid 0x%x, widget 0x%x (partnum 0x%x) is ",
smp_processor_id(), nasid, widget, partnum);
switch (partnum) {
case BRIDGE_WIDGET_PART_NUM:
case XBRIDGE_WIDGET_PART_NUM:
bridge_probe(nasid, widget, masterwid);
break;
default:
break;
}
return 0;
}
static int __init xbow_probe(nasid_t nasid)
{
lboard_t *brd;
klxbow_t *xbow_p;
unsigned masterwid, i;
printk("is xbow\n");
/*
* found xbow, so may have multiple bridges
* need to probe xbow
*/
brd = find_lboard((lboard_t *)KL_CONFIG_INFO(nasid), KLTYPE_MIDPLANE8);
if (!brd)
return -ENODEV;
xbow_p = (klxbow_t *)find_component(brd, NULL, KLSTRUCT_XBOW);
if (!xbow_p)
return -ENODEV;
/*
* Okay, here's a xbow. Lets arbitrate and find
* out if we should initialize it. Set enabled
* hub connected at highest or lowest widget as
* master.
*/
#ifdef WIDGET_A
i = HUB_WIDGET_ID_MAX + 1;
do {
i--;
} while ((!XBOW_PORT_TYPE_HUB(xbow_p, i)) ||
(!XBOW_PORT_IS_ENABLED(xbow_p, i)));
#else
i = HUB_WIDGET_ID_MIN - 1;
do {
i++;
} while ((!XBOW_PORT_TYPE_HUB(xbow_p, i)) ||
(!XBOW_PORT_IS_ENABLED(xbow_p, i)));
#endif
masterwid = i;
if (nasid != XBOW_PORT_NASID(xbow_p, i))
return 1;
for (i = HUB_WIDGET_ID_MIN; i <= HUB_WIDGET_ID_MAX; i++) {
if (XBOW_PORT_IS_ENABLED(xbow_p, i) &&
XBOW_PORT_TYPE_IO(xbow_p, i))
probe_one_port(nasid, i, masterwid);
}
return 0;
}
void __init xtalk_probe_node(cnodeid_t nid)
{
volatile u64 hubreg;
nasid_t nasid;
xwidget_part_num_t partnum;
widgetreg_t widget_id;
nasid = COMPACT_TO_NASID_NODEID(nid);
hubreg = REMOTE_HUB_L(nasid, IIO_LLP_CSR);
/* check whether the link is up */
if (!(hubreg & IIO_LLP_CSR_IS_UP))
return;
widget_id = *(volatile widgetreg_t *)
(RAW_NODE_SWIN_BASE(nasid, 0x0) + WIDGET_ID);
partnum = XWIDGET_PART_NUM(widget_id);
printk(KERN_INFO "Cpu %d, Nasid 0x%x: partnum 0x%x is ",
smp_processor_id(), nasid, partnum);
switch (partnum) {
case BRIDGE_WIDGET_PART_NUM:
bridge_probe(nasid, 0x8, 0xa);
break;
case XBOW_WIDGET_PART_NUM:
case XXBOW_WIDGET_PART_NUM:
xbow_probe(nasid);
break;
default:
printk(" unknown widget??\n");
break;
}
}