531 lines
23 KiB
Plaintext
531 lines
23 KiB
Plaintext
Power Management for USB
|
|
|
|
Alan Stern <stern@rowland.harvard.edu>
|
|
|
|
October 5, 2007
|
|
|
|
|
|
|
|
What is Power Management?
|
|
-------------------------
|
|
|
|
Power Management (PM) is the practice of saving energy by suspending
|
|
parts of a computer system when they aren't being used. While a
|
|
component is "suspended" it is in a nonfunctional low-power state; it
|
|
might even be turned off completely. A suspended component can be
|
|
"resumed" (returned to a functional full-power state) when the kernel
|
|
needs to use it. (There also are forms of PM in which components are
|
|
placed in a less functional but still usable state instead of being
|
|
suspended; an example would be reducing the CPU's clock rate. This
|
|
document will not discuss those other forms.)
|
|
|
|
When the parts being suspended include the CPU and most of the rest of
|
|
the system, we speak of it as a "system suspend". When a particular
|
|
device is turned off while the system as a whole remains running, we
|
|
call it a "dynamic suspend" (also known as a "runtime suspend" or
|
|
"selective suspend"). This document concentrates mostly on how
|
|
dynamic PM is implemented in the USB subsystem, although system PM is
|
|
covered to some extent (see Documentation/power/*.txt for more
|
|
information about system PM).
|
|
|
|
Note: Dynamic PM support for USB is present only if the kernel was
|
|
built with CONFIG_USB_SUSPEND enabled. System PM support is present
|
|
only if the kernel was built with CONFIG_SUSPEND or CONFIG_HIBERNATION
|
|
enabled.
|
|
|
|
|
|
What is Remote Wakeup?
|
|
----------------------
|
|
|
|
When a device has been suspended, it generally doesn't resume until
|
|
the computer tells it to. Likewise, if the entire computer has been
|
|
suspended, it generally doesn't resume until the user tells it to, say
|
|
by pressing a power button or opening the cover.
|
|
|
|
However some devices have the capability of resuming by themselves, or
|
|
asking the kernel to resume them, or even telling the entire computer
|
|
to resume. This capability goes by several names such as "Wake On
|
|
LAN"; we will refer to it generically as "remote wakeup". When a
|
|
device is enabled for remote wakeup and it is suspended, it may resume
|
|
itself (or send a request to be resumed) in response to some external
|
|
event. Examples include a suspended keyboard resuming when a key is
|
|
pressed, or a suspended USB hub resuming when a device is plugged in.
|
|
|
|
|
|
When is a USB device idle?
|
|
--------------------------
|
|
|
|
A device is idle whenever the kernel thinks it's not busy doing
|
|
anything important and thus is a candidate for being suspended. The
|
|
exact definition depends on the device's driver; drivers are allowed
|
|
to declare that a device isn't idle even when there's no actual
|
|
communication taking place. (For example, a hub isn't considered idle
|
|
unless all the devices plugged into that hub are already suspended.)
|
|
In addition, a device isn't considered idle so long as a program keeps
|
|
its usbfs file open, whether or not any I/O is going on.
|
|
|
|
If a USB device has no driver, its usbfs file isn't open, and it isn't
|
|
being accessed through sysfs, then it definitely is idle.
|
|
|
|
|
|
Forms of dynamic PM
|
|
-------------------
|
|
|
|
Dynamic suspends can occur in two ways: manual and automatic.
|
|
"Manual" means that the user has told the kernel to suspend a device,
|
|
whereas "automatic" means that the kernel has decided all by itself to
|
|
suspend a device. Automatic suspend is called "autosuspend" for
|
|
short. In general, a device won't be autosuspended unless it has been
|
|
idle for some minimum period of time, the so-called idle-delay time.
|
|
|
|
Of course, nothing the kernel does on its own initiative should
|
|
prevent the computer or its devices from working properly. If a
|
|
device has been autosuspended and a program tries to use it, the
|
|
kernel will automatically resume the device (autoresume). For the
|
|
same reason, an autosuspended device will usually have remote wakeup
|
|
enabled, if the device supports remote wakeup.
|
|
|
|
It is worth mentioning that many USB drivers don't support
|
|
autosuspend. In fact, at the time of this writing (Linux 2.6.23) the
|
|
only drivers which do support it are the hub driver, kaweth, asix,
|
|
usblp, usblcd, and usb-skeleton (which doesn't count). If a
|
|
non-supporting driver is bound to a device, the device won't be
|
|
autosuspended. In effect, the kernel pretends the device is never
|
|
idle.
|
|
|
|
We can categorize power management events in two broad classes:
|
|
external and internal. External events are those triggered by some
|
|
agent outside the USB stack: system suspend/resume (triggered by
|
|
userspace), manual dynamic suspend/resume (also triggered by
|
|
userspace), and remote wakeup (triggered by the device). Internal
|
|
events are those triggered within the USB stack: autosuspend and
|
|
autoresume.
|
|
|
|
|
|
The user interface for dynamic PM
|
|
---------------------------------
|
|
|
|
The user interface for controlling dynamic PM is located in the power/
|
|
subdirectory of each USB device's sysfs directory, that is, in
|
|
/sys/bus/usb/devices/.../power/ where "..." is the device's ID. The
|
|
relevant attribute files are: wakeup, level, and autosuspend.
|
|
|
|
power/wakeup
|
|
|
|
This file is empty if the device does not support
|
|
remote wakeup. Otherwise the file contains either the
|
|
word "enabled" or the word "disabled", and you can
|
|
write those words to the file. The setting determines
|
|
whether or not remote wakeup will be enabled when the
|
|
device is next suspended. (If the setting is changed
|
|
while the device is suspended, the change won't take
|
|
effect until the following suspend.)
|
|
|
|
power/level
|
|
|
|
This file contains one of three words: "on", "auto",
|
|
or "suspend". You can write those words to the file
|
|
to change the device's setting.
|
|
|
|
"on" means that the device should be resumed and
|
|
autosuspend is not allowed. (Of course, system
|
|
suspends are still allowed.)
|
|
|
|
"auto" is the normal state in which the kernel is
|
|
allowed to autosuspend and autoresume the device.
|
|
|
|
"suspend" means that the device should remain
|
|
suspended, and autoresume is not allowed. (But remote
|
|
wakeup may still be allowed, since it is controlled
|
|
separately by the power/wakeup attribute.)
|
|
|
|
power/autosuspend
|
|
|
|
This file contains an integer value, which is the
|
|
number of seconds the device should remain idle before
|
|
the kernel will autosuspend it (the idle-delay time).
|
|
The default is 2. 0 means to autosuspend as soon as
|
|
the device becomes idle, and -1 means never to
|
|
autosuspend. You can write a number to the file to
|
|
change the autosuspend idle-delay time.
|
|
|
|
Writing "-1" to power/autosuspend and writing "on" to power/level do
|
|
essentially the same thing -- they both prevent the device from being
|
|
autosuspended. Yes, this is a redundancy in the API.
|
|
|
|
(In 2.6.21 writing "0" to power/autosuspend would prevent the device
|
|
from being autosuspended; the behavior was changed in 2.6.22. The
|
|
power/autosuspend attribute did not exist prior to 2.6.21, and the
|
|
power/level attribute did not exist prior to 2.6.22.)
|
|
|
|
|
|
Changing the default idle-delay time
|
|
------------------------------------
|
|
|
|
The default autosuspend idle-delay time is controlled by a module
|
|
parameter in usbcore. You can specify the value when usbcore is
|
|
loaded. For example, to set it to 5 seconds instead of 2 you would
|
|
do:
|
|
|
|
modprobe usbcore autosuspend=5
|
|
|
|
Equivalently, you could add to /etc/modprobe.conf a line saying:
|
|
|
|
options usbcore autosuspend=5
|
|
|
|
Some distributions load the usbcore module very early during the boot
|
|
process, by means of a program or script running from an initramfs
|
|
image. To alter the parameter value you would have to rebuild that
|
|
image.
|
|
|
|
If usbcore is compiled into the kernel rather than built as a loadable
|
|
module, you can add
|
|
|
|
usbcore.autosuspend=5
|
|
|
|
to the kernel's boot command line.
|
|
|
|
Finally, the parameter value can be changed while the system is
|
|
running. If you do:
|
|
|
|
echo 5 >/sys/module/usbcore/parameters/autosuspend
|
|
|
|
then each new USB device will have its autosuspend idle-delay
|
|
initialized to 5. (The idle-delay values for already existing devices
|
|
will not be affected.)
|
|
|
|
Setting the initial default idle-delay to -1 will prevent any
|
|
autosuspend of any USB device. This is a simple alternative to
|
|
disabling CONFIG_USB_SUSPEND and rebuilding the kernel, and it has the
|
|
added benefit of allowing you to enable autosuspend for selected
|
|
devices.
|
|
|
|
|
|
Warnings
|
|
--------
|
|
|
|
The USB specification states that all USB devices must support power
|
|
management. Nevertheless, the sad fact is that many devices do not
|
|
support it very well. You can suspend them all right, but when you
|
|
try to resume them they disconnect themselves from the USB bus or
|
|
they stop working entirely. This seems to be especially prevalent
|
|
among printers and scanners, but plenty of other types of device have
|
|
the same deficiency.
|
|
|
|
For this reason, by default the kernel disables autosuspend (the
|
|
power/level attribute is initialized to "on") for all devices other
|
|
than hubs. Hubs, at least, appear to be reasonably well-behaved in
|
|
this regard.
|
|
|
|
(In 2.6.21 and 2.6.22 this wasn't the case. Autosuspend was enabled
|
|
by default for almost all USB devices. A number of people experienced
|
|
problems as a result.)
|
|
|
|
This means that non-hub devices won't be autosuspended unless the user
|
|
or a program explicitly enables it. As of this writing there aren't
|
|
any widespread programs which will do this; we hope that in the near
|
|
future device managers such as HAL will take on this added
|
|
responsibility. In the meantime you can always carry out the
|
|
necessary operations by hand or add them to a udev script. You can
|
|
also change the idle-delay time; 2 seconds is not the best choice for
|
|
every device.
|
|
|
|
Sometimes it turns out that even when a device does work okay with
|
|
autosuspend there are still problems. For example, there are
|
|
experimental patches adding autosuspend support to the usbhid driver,
|
|
which manages keyboards and mice, among other things. Tests with a
|
|
number of keyboards showed that typing on a suspended keyboard, while
|
|
causing the keyboard to do a remote wakeup all right, would
|
|
nonetheless frequently result in lost keystrokes. Tests with mice
|
|
showed that some of them would issue a remote-wakeup request in
|
|
response to button presses but not to motion, and some in response to
|
|
neither.
|
|
|
|
The kernel will not prevent you from enabling autosuspend on devices
|
|
that can't handle it. It is even possible in theory to damage a
|
|
device by suspending it at the wrong time -- for example, suspending a
|
|
USB hard disk might cause it to spin down without parking the heads.
|
|
(Highly unlikely, but possible.) Take care.
|
|
|
|
|
|
The driver interface for Power Management
|
|
-----------------------------------------
|
|
|
|
The requirements for a USB driver to support external power management
|
|
are pretty modest; the driver need only define
|
|
|
|
.suspend
|
|
.resume
|
|
.reset_resume
|
|
|
|
methods in its usb_driver structure, and the reset_resume method is
|
|
optional. The methods' jobs are quite simple:
|
|
|
|
The suspend method is called to warn the driver that the
|
|
device is going to be suspended. If the driver returns a
|
|
negative error code, the suspend will be aborted. Normally
|
|
the driver will return 0, in which case it must cancel all
|
|
outstanding URBs (usb_kill_urb()) and not submit any more.
|
|
|
|
The resume method is called to tell the driver that the
|
|
device has been resumed and the driver can return to normal
|
|
operation. URBs may once more be submitted.
|
|
|
|
The reset_resume method is called to tell the driver that
|
|
the device has been resumed and it also has been reset.
|
|
The driver should redo any necessary device initialization,
|
|
since the device has probably lost most or all of its state
|
|
(although the interfaces will be in the same altsettings as
|
|
before the suspend).
|
|
|
|
If the device is disconnected or powered down while it is suspended,
|
|
the disconnect method will be called instead of the resume or
|
|
reset_resume method. This is also quite likely to happen when
|
|
waking up from hibernation, as many systems do not maintain suspend
|
|
current to the USB host controllers during hibernation. (It's
|
|
possible to work around the hibernation-forces-disconnect problem by
|
|
using the USB Persist facility.)
|
|
|
|
The reset_resume method is used by the USB Persist facility (see
|
|
Documentation/usb/persist.txt) and it can also be used under certain
|
|
circumstances when CONFIG_USB_PERSIST is not enabled. Currently, if a
|
|
device is reset during a resume and the driver does not have a
|
|
reset_resume method, the driver won't receive any notification about
|
|
the resume. Later kernels will call the driver's disconnect method;
|
|
2.6.23 doesn't do this.
|
|
|
|
USB drivers are bound to interfaces, so their suspend and resume
|
|
methods get called when the interfaces are suspended or resumed. In
|
|
principle one might want to suspend some interfaces on a device (i.e.,
|
|
force the drivers for those interface to stop all activity) without
|
|
suspending the other interfaces. The USB core doesn't allow this; all
|
|
interfaces are suspended when the device itself is suspended and all
|
|
interfaces are resumed when the device is resumed. It isn't possible
|
|
to suspend or resume some but not all of a device's interfaces. The
|
|
closest you can come is to unbind the interfaces' drivers.
|
|
|
|
|
|
The driver interface for autosuspend and autoresume
|
|
---------------------------------------------------
|
|
|
|
To support autosuspend and autoresume, a driver should implement all
|
|
three of the methods listed above. In addition, a driver indicates
|
|
that it supports autosuspend by setting the .supports_autosuspend flag
|
|
in its usb_driver structure. It is then responsible for informing the
|
|
USB core whenever one of its interfaces becomes busy or idle. The
|
|
driver does so by calling these three functions:
|
|
|
|
int usb_autopm_get_interface(struct usb_interface *intf);
|
|
void usb_autopm_put_interface(struct usb_interface *intf);
|
|
int usb_autopm_set_interface(struct usb_interface *intf);
|
|
|
|
The functions work by maintaining a counter in the usb_interface
|
|
structure. When intf->pm_usage_count is > 0 then the interface is
|
|
deemed to be busy, and the kernel will not autosuspend the interface's
|
|
device. When intf->pm_usage_count is <= 0 then the interface is
|
|
considered to be idle, and the kernel may autosuspend the device.
|
|
|
|
(There is a similar pm_usage_count field in struct usb_device,
|
|
associated with the device itself rather than any of its interfaces.
|
|
This field is used only by the USB core.)
|
|
|
|
The driver owns intf->pm_usage_count; it can modify the value however
|
|
and whenever it likes. A nice aspect of the usb_autopm_* routines is
|
|
that the changes they make are protected by the usb_device structure's
|
|
PM mutex (udev->pm_mutex); however drivers may change pm_usage_count
|
|
without holding the mutex.
|
|
|
|
usb_autopm_get_interface() increments pm_usage_count and
|
|
attempts an autoresume if the new value is > 0 and the
|
|
device is suspended.
|
|
|
|
usb_autopm_put_interface() decrements pm_usage_count and
|
|
attempts an autosuspend if the new value is <= 0 and the
|
|
device isn't suspended.
|
|
|
|
usb_autopm_set_interface() leaves pm_usage_count alone.
|
|
It attempts an autoresume if the value is > 0 and the device
|
|
is suspended, and it attempts an autosuspend if the value is
|
|
<= 0 and the device isn't suspended.
|
|
|
|
There also are a couple of utility routines drivers can use:
|
|
|
|
usb_autopm_enable() sets pm_usage_cnt to 1 and then calls
|
|
usb_autopm_set_interface(), which will attempt an autoresume.
|
|
|
|
usb_autopm_disable() sets pm_usage_cnt to 0 and then calls
|
|
usb_autopm_set_interface(), which will attempt an autosuspend.
|
|
|
|
The conventional usage pattern is that a driver calls
|
|
usb_autopm_get_interface() in its open routine and
|
|
usb_autopm_put_interface() in its close or release routine. But
|
|
other patterns are possible.
|
|
|
|
The autosuspend attempts mentioned above will often fail for one
|
|
reason or another. For example, the power/level attribute might be
|
|
set to "on", or another interface in the same device might not be
|
|
idle. This is perfectly normal. If the reason for failure was that
|
|
the device hasn't been idle for long enough, a delayed workqueue
|
|
routine is automatically set up to carry out the operation when the
|
|
autosuspend idle-delay has expired.
|
|
|
|
Autoresume attempts also can fail. This will happen if power/level is
|
|
set to "suspend" or if the device doesn't manage to resume properly.
|
|
Unlike autosuspend, there's no delay for an autoresume.
|
|
|
|
|
|
Other parts of the driver interface
|
|
-----------------------------------
|
|
|
|
Sometimes a driver needs to make sure that remote wakeup is enabled
|
|
during autosuspend. For example, there's not much point
|
|
autosuspending a keyboard if the user can't cause the keyboard to do a
|
|
remote wakeup by typing on it. If the driver sets
|
|
intf->needs_remote_wakeup to 1, the kernel won't autosuspend the
|
|
device if remote wakeup isn't available or has been disabled through
|
|
the power/wakeup attribute. (If the device is already autosuspended,
|
|
though, setting this flag won't cause the kernel to autoresume it.
|
|
Normally a driver would set this flag in its probe method, at which
|
|
time the device is guaranteed not to be autosuspended.)
|
|
|
|
The usb_autopm_* routines have to run in a sleepable process context;
|
|
they must not be called from an interrupt handler or while holding a
|
|
spinlock. In fact, the entire autosuspend mechanism is not well geared
|
|
toward interrupt-driven operation. However there is one thing a
|
|
driver can do in an interrupt handler:
|
|
|
|
usb_mark_last_busy(struct usb_device *udev);
|
|
|
|
This sets udev->last_busy to the current time. udev->last_busy is the
|
|
field used for idle-delay calculations; updating it will cause any
|
|
pending autosuspend to be moved back. The usb_autopm_* routines will
|
|
also set the last_busy field to the current time.
|
|
|
|
Calling urb_mark_last_busy() from within an URB completion handler is
|
|
subject to races: The kernel may have just finished deciding the
|
|
device has been idle for long enough but not yet gotten around to
|
|
calling the driver's suspend method. The driver would have to be
|
|
responsible for synchronizing its suspend method with its URB
|
|
completion handler and causing the autosuspend to fail with -EBUSY if
|
|
an URB had completed too recently.
|
|
|
|
External suspend calls should never be allowed to fail in this way,
|
|
only autosuspend calls. The driver can tell them apart by checking
|
|
udev->auto_pm; this flag will be set to 1 for internal PM events
|
|
(autosuspend or autoresume) and 0 for external PM events.
|
|
|
|
Many of the ingredients in the autosuspend framework are oriented
|
|
towards interfaces: The usb_interface structure contains the
|
|
pm_usage_cnt field, and the usb_autopm_* routines take an interface
|
|
pointer as their argument. But somewhat confusingly, a few of the
|
|
pieces (usb_mark_last_busy() and udev->auto_pm) use the usb_device
|
|
structure instead. Drivers need to keep this straight; they can call
|
|
interface_to_usbdev() to find the device structure for a given
|
|
interface.
|
|
|
|
|
|
Locking requirements
|
|
--------------------
|
|
|
|
All three suspend/resume methods are always called while holding the
|
|
usb_device's PM mutex. For external events -- but not necessarily for
|
|
autosuspend or autoresume -- the device semaphore (udev->dev.sem) will
|
|
also be held. This implies that external suspend/resume events are
|
|
mutually exclusive with calls to probe, disconnect, pre_reset, and
|
|
post_reset; the USB core guarantees that this is true of internal
|
|
suspend/resume events as well.
|
|
|
|
If a driver wants to block all suspend/resume calls during some
|
|
critical section, it can simply acquire udev->pm_mutex. Note that
|
|
calls to resume may be triggered indirectly. Block IO due to memory
|
|
allocations can make the vm subsystem resume a device. Thus while
|
|
holding this lock you must not allocate memory with GFP_KERNEL or
|
|
GFP_NOFS.
|
|
|
|
Alternatively, if the critical section might call some of the
|
|
usb_autopm_* routines, the driver can avoid deadlock by doing:
|
|
|
|
down(&udev->dev.sem);
|
|
rc = usb_autopm_get_interface(intf);
|
|
|
|
and at the end of the critical section:
|
|
|
|
if (!rc)
|
|
usb_autopm_put_interface(intf);
|
|
up(&udev->dev.sem);
|
|
|
|
Holding the device semaphore will block all external PM calls, and the
|
|
usb_autopm_get_interface() will prevent any internal PM calls, even if
|
|
it fails. (Exercise: Why?)
|
|
|
|
The rules for locking order are:
|
|
|
|
Never acquire any device semaphore while holding any PM mutex.
|
|
|
|
Never acquire udev->pm_mutex while holding the PM mutex for
|
|
a device that isn't a descendant of udev.
|
|
|
|
In other words, PM mutexes should only be acquired going up the device
|
|
tree, and they should be acquired only after locking all the device
|
|
semaphores you need to hold. These rules don't matter to drivers very
|
|
much; they usually affect just the USB core.
|
|
|
|
Still, drivers do need to be careful. For example, many drivers use a
|
|
private mutex to synchronize their normal I/O activities with their
|
|
disconnect method. Now if the driver supports autosuspend then it
|
|
must call usb_autopm_put_interface() from somewhere -- maybe from its
|
|
close method. It should make the call while holding the private mutex,
|
|
since a driver shouldn't call any of the usb_autopm_* functions for an
|
|
interface from which it has been unbound.
|
|
|
|
But the usb_autpm_* routines always acquire the device's PM mutex, and
|
|
consequently the locking order has to be: private mutex first, PM
|
|
mutex second. Since the suspend method is always called with the PM
|
|
mutex held, it mustn't try to acquire the private mutex. It has to
|
|
synchronize with the driver's I/O activities in some other way.
|
|
|
|
|
|
Interaction between dynamic PM and system PM
|
|
--------------------------------------------
|
|
|
|
Dynamic power management and system power management can interact in
|
|
a couple of ways.
|
|
|
|
Firstly, a device may already be manually suspended or autosuspended
|
|
when a system suspend occurs. Since system suspends are supposed to
|
|
be as transparent as possible, the device should remain suspended
|
|
following the system resume. The 2.6.23 kernel obeys this principle
|
|
for manually suspended devices but not for autosuspended devices; they
|
|
do get resumed when the system wakes up. (Presumably they will be
|
|
autosuspended again after their idle-delay time expires.) In later
|
|
kernels this behavior will be fixed.
|
|
|
|
(There is an exception. If a device would undergo a reset-resume
|
|
instead of a normal resume, and the device is enabled for remote
|
|
wakeup, then the reset-resume takes place even if the device was
|
|
already suspended when the system suspend began. The justification is
|
|
that a reset-resume is a kind of remote-wakeup event. Or to put it
|
|
another way, a device which needs a reset won't be able to generate
|
|
normal remote-wakeup signals, so it ought to be resumed immediately.)
|
|
|
|
Secondly, a dynamic power-management event may occur as a system
|
|
suspend is underway. The window for this is short, since system
|
|
suspends don't take long (a few seconds usually), but it can happen.
|
|
For example, a suspended device may send a remote-wakeup signal while
|
|
the system is suspending. The remote wakeup may succeed, which would
|
|
cause the system suspend to abort. If the remote wakeup doesn't
|
|
succeed, it may still remain active and thus cause the system to
|
|
resume as soon as the system suspend is complete. Or the remote
|
|
wakeup may fail and get lost. Which outcome occurs depends on timing
|
|
and on the hardware and firmware design.
|
|
|
|
More interestingly, a device might undergo a manual resume or
|
|
autoresume during system suspend. With current kernels this shouldn't
|
|
happen, because manual resumes must be initiated by userspace and
|
|
autoresumes happen in response to I/O requests, but all user processes
|
|
and I/O should be quiescent during a system suspend -- thanks to the
|
|
freezer. However there are plans to do away with the freezer, which
|
|
would mean these things would become possible. If and when this comes
|
|
about, the USB core will carefully arrange matters so that either type
|
|
of resume will block until the entire system has resumed.
|