linux-sg2042/drivers/phy/phy-rcar-gen3-usb2.c

379 lines
10 KiB
C

/*
* Renesas R-Car Gen3 for USB2.0 PHY driver
*
* Copyright (C) 2015 Renesas Electronics Corporation
*
* This is based on the phy-rcar-gen2 driver:
* Copyright (C) 2014 Renesas Solutions Corp.
* Copyright (C) 2014 Cogent Embedded, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
/******* USB2.0 Host registers (original offset is +0x200) *******/
#define USB2_INT_ENABLE 0x000
#define USB2_USBCTR 0x00c
#define USB2_SPD_RSM_TIMSET 0x10c
#define USB2_OC_TIMSET 0x110
#define USB2_COMMCTRL 0x600
#define USB2_OBINTSTA 0x604
#define USB2_OBINTEN 0x608
#define USB2_VBCTRL 0x60c
#define USB2_LINECTRL1 0x610
#define USB2_ADPCTRL 0x630
/* INT_ENABLE */
#define USB2_INT_ENABLE_UCOM_INTEN BIT(3)
#define USB2_INT_ENABLE_USBH_INTB_EN BIT(2)
#define USB2_INT_ENABLE_USBH_INTA_EN BIT(1)
#define USB2_INT_ENABLE_INIT (USB2_INT_ENABLE_UCOM_INTEN | \
USB2_INT_ENABLE_USBH_INTB_EN | \
USB2_INT_ENABLE_USBH_INTA_EN)
/* USBCTR */
#define USB2_USBCTR_DIRPD BIT(2)
#define USB2_USBCTR_PLL_RST BIT(1)
/* SPD_RSM_TIMSET */
#define USB2_SPD_RSM_TIMSET_INIT 0x014e029b
/* OC_TIMSET */
#define USB2_OC_TIMSET_INIT 0x000209ab
/* COMMCTRL */
#define USB2_COMMCTRL_OTG_PERI BIT(31) /* 1 = Peripheral mode */
/* OBINTSTA and OBINTEN */
#define USB2_OBINT_SESSVLDCHG BIT(12)
#define USB2_OBINT_IDDIGCHG BIT(11)
#define USB2_OBINT_BITS (USB2_OBINT_SESSVLDCHG | \
USB2_OBINT_IDDIGCHG)
/* VBCTRL */
#define USB2_VBCTRL_DRVVBUSSEL BIT(8)
/* LINECTRL1 */
#define USB2_LINECTRL1_DPRPD_EN BIT(19)
#define USB2_LINECTRL1_DP_RPD BIT(18)
#define USB2_LINECTRL1_DMRPD_EN BIT(17)
#define USB2_LINECTRL1_DM_RPD BIT(16)
/* ADPCTRL */
#define USB2_ADPCTRL_OTGSESSVLD BIT(20)
#define USB2_ADPCTRL_IDDIG BIT(19)
#define USB2_ADPCTRL_IDPULLUP BIT(5) /* 1 = ID sampling is enabled */
#define USB2_ADPCTRL_DRVVBUS BIT(4)
/******* HSUSB registers (original offset is +0x100) *******/
#define HSUSB_LPSTS 0x02
#define HSUSB_UGCTRL2 0x84
/* Low Power Status register (LPSTS) */
#define HSUSB_LPSTS_SUSPM 0x4000
/* USB General control register 2 (UGCTRL2) */
#define HSUSB_UGCTRL2_MASK 0x00000031 /* bit[31:6] should be 0 */
#define HSUSB_UGCTRL2_USB0SEL 0x00000030
#define HSUSB_UGCTRL2_USB0SEL_HOST 0x00000010
#define HSUSB_UGCTRL2_USB0SEL_HS_USB 0x00000020
#define HSUSB_UGCTRL2_USB0SEL_OTG 0x00000030
struct rcar_gen3_data {
void __iomem *base;
struct clk *clk;
};
struct rcar_gen3_chan {
struct rcar_gen3_data usb2;
struct rcar_gen3_data hsusb;
struct phy *phy;
};
static void rcar_gen3_set_host_mode(struct rcar_gen3_chan *ch, int host)
{
void __iomem *usb2_base = ch->usb2.base;
u32 val = readl(usb2_base + USB2_COMMCTRL);
dev_vdbg(&ch->phy->dev, "%s: %08x, %d\n", __func__, val, host);
if (host)
val &= ~USB2_COMMCTRL_OTG_PERI;
else
val |= USB2_COMMCTRL_OTG_PERI;
writel(val, usb2_base + USB2_COMMCTRL);
}
static void rcar_gen3_set_linectrl(struct rcar_gen3_chan *ch, int dp, int dm)
{
void __iomem *usb2_base = ch->usb2.base;
u32 val = readl(usb2_base + USB2_LINECTRL1);
dev_vdbg(&ch->phy->dev, "%s: %08x, %d, %d\n", __func__, val, dp, dm);
val &= ~(USB2_LINECTRL1_DP_RPD | USB2_LINECTRL1_DM_RPD);
if (dp)
val |= USB2_LINECTRL1_DP_RPD;
if (dm)
val |= USB2_LINECTRL1_DM_RPD;
writel(val, usb2_base + USB2_LINECTRL1);
}
static void rcar_gen3_enable_vbus_ctrl(struct rcar_gen3_chan *ch, int vbus)
{
void __iomem *usb2_base = ch->usb2.base;
u32 val = readl(usb2_base + USB2_ADPCTRL);
dev_vdbg(&ch->phy->dev, "%s: %08x, %d\n", __func__, val, vbus);
if (vbus)
val |= USB2_ADPCTRL_DRVVBUS;
else
val &= ~USB2_ADPCTRL_DRVVBUS;
writel(val, usb2_base + USB2_ADPCTRL);
}
static void rcar_gen3_init_for_host(struct rcar_gen3_chan *ch)
{
rcar_gen3_set_linectrl(ch, 1, 1);
rcar_gen3_set_host_mode(ch, 1);
rcar_gen3_enable_vbus_ctrl(ch, 1);
}
static void rcar_gen3_init_for_peri(struct rcar_gen3_chan *ch)
{
rcar_gen3_set_linectrl(ch, 0, 1);
rcar_gen3_set_host_mode(ch, 0);
rcar_gen3_enable_vbus_ctrl(ch, 0);
}
static bool rcar_gen3_check_vbus(struct rcar_gen3_chan *ch)
{
return !!(readl(ch->usb2.base + USB2_ADPCTRL) &
USB2_ADPCTRL_OTGSESSVLD);
}
static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch)
{
return !!(readl(ch->usb2.base + USB2_ADPCTRL) & USB2_ADPCTRL_IDDIG);
}
static void rcar_gen3_device_recognition(struct rcar_gen3_chan *ch)
{
bool is_host = true;
/* B-device? */
if (rcar_gen3_check_id(ch) && rcar_gen3_check_vbus(ch))
is_host = false;
if (is_host)
rcar_gen3_init_for_host(ch);
else
rcar_gen3_init_for_peri(ch);
}
static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
{
void __iomem *usb2_base = ch->usb2.base;
u32 val;
val = readl(usb2_base + USB2_VBCTRL);
writel(val | USB2_VBCTRL_DRVVBUSSEL, usb2_base + USB2_VBCTRL);
writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA);
val = readl(usb2_base + USB2_OBINTEN);
writel(val | USB2_OBINT_BITS, usb2_base + USB2_OBINTEN);
val = readl(usb2_base + USB2_ADPCTRL);
writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL);
val = readl(usb2_base + USB2_LINECTRL1);
rcar_gen3_set_linectrl(ch, 0, 0);
writel(val | USB2_LINECTRL1_DPRPD_EN | USB2_LINECTRL1_DMRPD_EN,
usb2_base + USB2_LINECTRL1);
rcar_gen3_device_recognition(ch);
}
static int rcar_gen3_phy_usb2_init(struct phy *p)
{
struct rcar_gen3_chan *channel = phy_get_drvdata(p);
void __iomem *usb2_base = channel->usb2.base;
void __iomem *hsusb_base = channel->hsusb.base;
u32 val;
/* Initialize USB2 part */
writel(USB2_INT_ENABLE_INIT, usb2_base + USB2_INT_ENABLE);
writel(USB2_SPD_RSM_TIMSET_INIT, usb2_base + USB2_SPD_RSM_TIMSET);
writel(USB2_OC_TIMSET_INIT, usb2_base + USB2_OC_TIMSET);
/* Initialize HSUSB part */
if (hsusb_base) {
val = readl(hsusb_base + HSUSB_UGCTRL2);
val = (val & ~HSUSB_UGCTRL2_USB0SEL) |
HSUSB_UGCTRL2_USB0SEL_OTG;
writel(val & HSUSB_UGCTRL2_MASK, hsusb_base + HSUSB_UGCTRL2);
/* Initialize otg part */
rcar_gen3_init_otg(channel);
}
return 0;
}
static int rcar_gen3_phy_usb2_exit(struct phy *p)
{
struct rcar_gen3_chan *channel = phy_get_drvdata(p);
writel(0, channel->usb2.base + USB2_INT_ENABLE);
return 0;
}
static int rcar_gen3_phy_usb2_power_on(struct phy *p)
{
struct rcar_gen3_chan *channel = phy_get_drvdata(p);
void __iomem *usb2_base = channel->usb2.base;
void __iomem *hsusb_base = channel->hsusb.base;
u32 val;
val = readl(usb2_base + USB2_USBCTR);
val |= USB2_USBCTR_PLL_RST;
writel(val, usb2_base + USB2_USBCTR);
val &= ~USB2_USBCTR_PLL_RST;
writel(val, usb2_base + USB2_USBCTR);
/*
* TODO: To reduce power consuming, this driver should set the SUSPM
* after the PHY detects ID pin as peripheral.
*/
if (hsusb_base) {
/* Power on HSUSB PHY */
val = readw(hsusb_base + HSUSB_LPSTS);
val |= HSUSB_LPSTS_SUSPM;
writew(val, hsusb_base + HSUSB_LPSTS);
}
return 0;
}
static int rcar_gen3_phy_usb2_power_off(struct phy *p)
{
struct rcar_gen3_chan *channel = phy_get_drvdata(p);
void __iomem *hsusb_base = channel->hsusb.base;
u32 val;
if (hsusb_base) {
/* Power off HSUSB PHY */
val = readw(hsusb_base + HSUSB_LPSTS);
val &= ~HSUSB_LPSTS_SUSPM;
writew(val, hsusb_base + HSUSB_LPSTS);
}
return 0;
}
static struct phy_ops rcar_gen3_phy_usb2_ops = {
.init = rcar_gen3_phy_usb2_init,
.exit = rcar_gen3_phy_usb2_exit,
.power_on = rcar_gen3_phy_usb2_power_on,
.power_off = rcar_gen3_phy_usb2_power_off,
.owner = THIS_MODULE,
};
static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
{
struct rcar_gen3_chan *ch = _ch;
void __iomem *usb2_base = ch->usb2.base;
u32 status = readl(usb2_base + USB2_OBINTSTA);
irqreturn_t ret = IRQ_NONE;
if (status & USB2_OBINT_BITS) {
dev_vdbg(&ch->phy->dev, "%s: %08x\n", __func__, status);
writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA);
rcar_gen3_device_recognition(ch);
ret = IRQ_HANDLED;
}
return ret;
}
static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
{ .compatible = "renesas,usb2-phy-r8a7795" },
{ }
};
MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb2_match_table);
static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct rcar_gen3_chan *channel;
struct phy_provider *provider;
struct resource *res;
if (!dev->of_node) {
dev_err(dev, "This driver needs device tree\n");
return -EINVAL;
}
channel = devm_kzalloc(dev, sizeof(*channel), GFP_KERNEL);
if (!channel)
return -ENOMEM;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "usb2_host");
channel->usb2.base = devm_ioremap_resource(dev, res);
if (IS_ERR(channel->usb2.base))
return PTR_ERR(channel->usb2.base);
/* "hsusb" memory resource is optional */
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hsusb");
/* To avoid error message by devm_ioremap_resource() */
if (res) {
int irq;
channel->hsusb.base = devm_ioremap_resource(dev, res);
if (IS_ERR(channel->hsusb.base))
channel->hsusb.base = NULL;
/* call request_irq for OTG */
irq = platform_get_irq(pdev, 0);
if (irq >= 0)
irq = devm_request_irq(dev, irq, rcar_gen3_phy_usb2_irq,
IRQF_SHARED, dev_name(dev),
channel);
if (irq < 0)
dev_err(dev, "No irq handler (%d)\n", irq);
}
/* devm_phy_create() will call pm_runtime_enable(dev); */
channel->phy = devm_phy_create(dev, NULL, &rcar_gen3_phy_usb2_ops);
if (IS_ERR(channel->phy)) {
dev_err(dev, "Failed to create USB2 PHY\n");
return PTR_ERR(channel->phy);
}
phy_set_drvdata(channel->phy, channel);
provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
if (IS_ERR(provider))
dev_err(dev, "Failed to register PHY provider\n");
return PTR_ERR_OR_ZERO(provider);
}
static struct platform_driver rcar_gen3_phy_usb2_driver = {
.driver = {
.name = "phy_rcar_gen3_usb2",
.of_match_table = rcar_gen3_phy_usb2_match_table,
},
.probe = rcar_gen3_phy_usb2_probe,
};
module_platform_driver(rcar_gen3_phy_usb2_driver);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Renesas R-Car Gen3 USB 2.0 PHY");
MODULE_AUTHOR("Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>");