374 lines
8.6 KiB
C
374 lines
8.6 KiB
C
/* OmniVision OV6630/OV6130 Camera Chip Support Code
|
|
*
|
|
* Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org>
|
|
* http://alpha.dyndns.org/ov511/
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
|
|
*/
|
|
|
|
#define DEBUG
|
|
|
|
#include <linux/slab.h>
|
|
#include "ovcamchip_priv.h"
|
|
|
|
/* Registers */
|
|
#define REG_GAIN 0x00 /* gain [5:0] */
|
|
#define REG_BLUE 0x01 /* blue gain */
|
|
#define REG_RED 0x02 /* red gain */
|
|
#define REG_SAT 0x03 /* saturation [7:3] */
|
|
#define REG_CNT 0x05 /* Y contrast [3:0] */
|
|
#define REG_BRT 0x06 /* Y brightness */
|
|
#define REG_SHARP 0x07 /* sharpness */
|
|
#define REG_WB_BLUE 0x0C /* WB blue ratio [5:0] */
|
|
#define REG_WB_RED 0x0D /* WB red ratio [5:0] */
|
|
#define REG_EXP 0x10 /* exposure */
|
|
|
|
/* Window parameters */
|
|
#define HWSBASE 0x38
|
|
#define HWEBASE 0x3A
|
|
#define VWSBASE 0x05
|
|
#define VWEBASE 0x06
|
|
|
|
struct ov6x30 {
|
|
int auto_brt;
|
|
int auto_exp;
|
|
int backlight;
|
|
int bandfilt;
|
|
int mirror;
|
|
};
|
|
|
|
static struct ovcamchip_regvals regvals_init_6x30[] = {
|
|
{ 0x12, 0x80 }, /* reset */
|
|
{ 0x00, 0x1f }, /* Gain */
|
|
{ 0x01, 0x99 }, /* Blue gain */
|
|
{ 0x02, 0x7c }, /* Red gain */
|
|
{ 0x03, 0xc0 }, /* Saturation */
|
|
{ 0x05, 0x0a }, /* Contrast */
|
|
{ 0x06, 0x95 }, /* Brightness */
|
|
{ 0x07, 0x2d }, /* Sharpness */
|
|
{ 0x0c, 0x20 },
|
|
{ 0x0d, 0x20 },
|
|
{ 0x0e, 0x20 },
|
|
{ 0x0f, 0x05 },
|
|
{ 0x10, 0x9a }, /* "exposure check" */
|
|
{ 0x11, 0x00 }, /* Pixel clock = fastest */
|
|
{ 0x12, 0x24 }, /* Enable AGC and AWB */
|
|
{ 0x13, 0x21 },
|
|
{ 0x14, 0x80 },
|
|
{ 0x15, 0x01 },
|
|
{ 0x16, 0x03 },
|
|
{ 0x17, 0x38 },
|
|
{ 0x18, 0xea },
|
|
{ 0x19, 0x04 },
|
|
{ 0x1a, 0x93 },
|
|
{ 0x1b, 0x00 },
|
|
{ 0x1e, 0xc4 },
|
|
{ 0x1f, 0x04 },
|
|
{ 0x20, 0x20 },
|
|
{ 0x21, 0x10 },
|
|
{ 0x22, 0x88 },
|
|
{ 0x23, 0xc0 }, /* Crystal circuit power level */
|
|
{ 0x25, 0x9a }, /* Increase AEC black pixel ratio */
|
|
{ 0x26, 0xb2 }, /* BLC enable */
|
|
{ 0x27, 0xa2 },
|
|
{ 0x28, 0x00 },
|
|
{ 0x29, 0x00 },
|
|
{ 0x2a, 0x84 }, /* (keep) */
|
|
{ 0x2b, 0xa8 }, /* (keep) */
|
|
{ 0x2c, 0xa0 },
|
|
{ 0x2d, 0x95 }, /* Enable auto-brightness */
|
|
{ 0x2e, 0x88 },
|
|
{ 0x33, 0x26 },
|
|
{ 0x34, 0x03 },
|
|
{ 0x36, 0x8f },
|
|
{ 0x37, 0x80 },
|
|
{ 0x38, 0x83 },
|
|
{ 0x39, 0x80 },
|
|
{ 0x3a, 0x0f },
|
|
{ 0x3b, 0x3c },
|
|
{ 0x3c, 0x1a },
|
|
{ 0x3d, 0x80 },
|
|
{ 0x3e, 0x80 },
|
|
{ 0x3f, 0x0e },
|
|
{ 0x40, 0x00 }, /* White bal */
|
|
{ 0x41, 0x00 }, /* White bal */
|
|
{ 0x42, 0x80 },
|
|
{ 0x43, 0x3f }, /* White bal */
|
|
{ 0x44, 0x80 },
|
|
{ 0x45, 0x20 },
|
|
{ 0x46, 0x20 },
|
|
{ 0x47, 0x80 },
|
|
{ 0x48, 0x7f },
|
|
{ 0x49, 0x00 },
|
|
{ 0x4a, 0x00 },
|
|
{ 0x4b, 0x80 },
|
|
{ 0x4c, 0xd0 },
|
|
{ 0x4d, 0x10 }, /* U = 0.563u, V = 0.714v */
|
|
{ 0x4e, 0x40 },
|
|
{ 0x4f, 0x07 }, /* UV average mode, color killer: strongest */
|
|
{ 0x50, 0xff },
|
|
{ 0x54, 0x23 }, /* Max AGC gain: 18dB */
|
|
{ 0x55, 0xff },
|
|
{ 0x56, 0x12 },
|
|
{ 0x57, 0x81 }, /* (default) */
|
|
{ 0x58, 0x75 },
|
|
{ 0x59, 0x01 }, /* AGC dark current compensation: +1 */
|
|
{ 0x5a, 0x2c },
|
|
{ 0x5b, 0x0f }, /* AWB chrominance levels */
|
|
{ 0x5c, 0x10 },
|
|
{ 0x3d, 0x80 },
|
|
{ 0x27, 0xa6 },
|
|
/* Toggle AWB off and on */
|
|
{ 0x12, 0x20 },
|
|
{ 0x12, 0x24 },
|
|
|
|
{ 0xff, 0xff }, /* END MARKER */
|
|
};
|
|
|
|
/* This initializes the OV6x30 camera chip and relevant variables. */
|
|
static int ov6x30_init(struct i2c_client *c)
|
|
{
|
|
struct ovcamchip *ov = i2c_get_clientdata(c);
|
|
struct ov6x30 *s;
|
|
int rc;
|
|
|
|
DDEBUG(4, &c->dev, "entered");
|
|
|
|
rc = ov_write_regvals(c, regvals_init_6x30);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
ov->spriv = s = kzalloc(sizeof *s, GFP_KERNEL);
|
|
if (!s)
|
|
return -ENOMEM;
|
|
|
|
s->auto_brt = 1;
|
|
s->auto_exp = 1;
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int ov6x30_free(struct i2c_client *c)
|
|
{
|
|
struct ovcamchip *ov = i2c_get_clientdata(c);
|
|
|
|
kfree(ov->spriv);
|
|
return 0;
|
|
}
|
|
|
|
static int ov6x30_set_control(struct i2c_client *c,
|
|
struct ovcamchip_control *ctl)
|
|
{
|
|
struct ovcamchip *ov = i2c_get_clientdata(c);
|
|
struct ov6x30 *s = ov->spriv;
|
|
int rc;
|
|
int v = ctl->value;
|
|
|
|
switch (ctl->id) {
|
|
case OVCAMCHIP_CID_CONT:
|
|
rc = ov_write_mask(c, REG_CNT, v >> 12, 0x0f);
|
|
break;
|
|
case OVCAMCHIP_CID_BRIGHT:
|
|
rc = ov_write(c, REG_BRT, v >> 8);
|
|
break;
|
|
case OVCAMCHIP_CID_SAT:
|
|
rc = ov_write(c, REG_SAT, v >> 8);
|
|
break;
|
|
case OVCAMCHIP_CID_HUE:
|
|
rc = ov_write(c, REG_RED, 0xFF - (v >> 8));
|
|
if (rc < 0)
|
|
goto out;
|
|
|
|
rc = ov_write(c, REG_BLUE, v >> 8);
|
|
break;
|
|
case OVCAMCHIP_CID_EXP:
|
|
rc = ov_write(c, REG_EXP, v);
|
|
break;
|
|
case OVCAMCHIP_CID_FREQ:
|
|
{
|
|
int sixty = (v == 60);
|
|
|
|
rc = ov_write(c, 0x2b, sixty?0xa8:0x28);
|
|
if (rc < 0)
|
|
goto out;
|
|
|
|
rc = ov_write(c, 0x2a, sixty?0x84:0xa4);
|
|
break;
|
|
}
|
|
case OVCAMCHIP_CID_BANDFILT:
|
|
rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);
|
|
s->bandfilt = v;
|
|
break;
|
|
case OVCAMCHIP_CID_AUTOBRIGHT:
|
|
rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);
|
|
s->auto_brt = v;
|
|
break;
|
|
case OVCAMCHIP_CID_AUTOEXP:
|
|
rc = ov_write_mask(c, 0x28, v?0x00:0x10, 0x10);
|
|
s->auto_exp = v;
|
|
break;
|
|
case OVCAMCHIP_CID_BACKLIGHT:
|
|
{
|
|
rc = ov_write_mask(c, 0x4e, v?0x80:0x60, 0xe0);
|
|
if (rc < 0)
|
|
goto out;
|
|
|
|
rc = ov_write_mask(c, 0x29, v?0x08:0x00, 0x08);
|
|
if (rc < 0)
|
|
goto out;
|
|
|
|
rc = ov_write_mask(c, 0x28, v?0x02:0x00, 0x02);
|
|
s->backlight = v;
|
|
break;
|
|
}
|
|
case OVCAMCHIP_CID_MIRROR:
|
|
rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);
|
|
s->mirror = v;
|
|
break;
|
|
default:
|
|
DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
|
|
return -EPERM;
|
|
}
|
|
|
|
out:
|
|
DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);
|
|
return rc;
|
|
}
|
|
|
|
static int ov6x30_get_control(struct i2c_client *c,
|
|
struct ovcamchip_control *ctl)
|
|
{
|
|
struct ovcamchip *ov = i2c_get_clientdata(c);
|
|
struct ov6x30 *s = ov->spriv;
|
|
int rc = 0;
|
|
unsigned char val = 0;
|
|
|
|
switch (ctl->id) {
|
|
case OVCAMCHIP_CID_CONT:
|
|
rc = ov_read(c, REG_CNT, &val);
|
|
ctl->value = (val & 0x0f) << 12;
|
|
break;
|
|
case OVCAMCHIP_CID_BRIGHT:
|
|
rc = ov_read(c, REG_BRT, &val);
|
|
ctl->value = val << 8;
|
|
break;
|
|
case OVCAMCHIP_CID_SAT:
|
|
rc = ov_read(c, REG_SAT, &val);
|
|
ctl->value = val << 8;
|
|
break;
|
|
case OVCAMCHIP_CID_HUE:
|
|
rc = ov_read(c, REG_BLUE, &val);
|
|
ctl->value = val << 8;
|
|
break;
|
|
case OVCAMCHIP_CID_EXP:
|
|
rc = ov_read(c, REG_EXP, &val);
|
|
ctl->value = val;
|
|
break;
|
|
case OVCAMCHIP_CID_BANDFILT:
|
|
ctl->value = s->bandfilt;
|
|
break;
|
|
case OVCAMCHIP_CID_AUTOBRIGHT:
|
|
ctl->value = s->auto_brt;
|
|
break;
|
|
case OVCAMCHIP_CID_AUTOEXP:
|
|
ctl->value = s->auto_exp;
|
|
break;
|
|
case OVCAMCHIP_CID_BACKLIGHT:
|
|
ctl->value = s->backlight;
|
|
break;
|
|
case OVCAMCHIP_CID_MIRROR:
|
|
ctl->value = s->mirror;
|
|
break;
|
|
default:
|
|
DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
|
|
return -EPERM;
|
|
}
|
|
|
|
DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);
|
|
return rc;
|
|
}
|
|
|
|
static int ov6x30_mode_init(struct i2c_client *c, struct ovcamchip_window *win)
|
|
{
|
|
/******** QCIF-specific regs ********/
|
|
|
|
ov_write_mask(c, 0x14, win->quarter?0x20:0x00, 0x20);
|
|
|
|
/******** Palette-specific regs ********/
|
|
|
|
if (win->format == VIDEO_PALETTE_GREY) {
|
|
if (c->adapter->id == I2C_HW_SMBUS_OV518) {
|
|
/* Do nothing - we're already in 8-bit mode */
|
|
} else {
|
|
ov_write_mask(c, 0x13, 0x20, 0x20);
|
|
}
|
|
} else {
|
|
/* The OV518 needs special treatment. Although both the OV518
|
|
* and the OV6630 support a 16-bit video bus, only the 8 bit Y
|
|
* bus is actually used. The UV bus is tied to ground.
|
|
* Therefore, the OV6630 needs to be in 8-bit multiplexed
|
|
* output mode */
|
|
|
|
if (c->adapter->id == I2C_HW_SMBUS_OV518) {
|
|
/* Do nothing - we want to stay in 8-bit mode */
|
|
/* Warning: Messing with reg 0x13 breaks OV518 color */
|
|
} else {
|
|
ov_write_mask(c, 0x13, 0x00, 0x20);
|
|
}
|
|
}
|
|
|
|
/******** Clock programming ********/
|
|
|
|
ov_write(c, 0x11, win->clockdiv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov6x30_set_window(struct i2c_client *c, struct ovcamchip_window *win)
|
|
{
|
|
int ret, hwscale, vwscale;
|
|
|
|
ret = ov6x30_mode_init(c, win);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (win->quarter) {
|
|
hwscale = 0;
|
|
vwscale = 0;
|
|
} else {
|
|
hwscale = 1;
|
|
vwscale = 1; /* The datasheet says 0; it's wrong */
|
|
}
|
|
|
|
ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));
|
|
ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));
|
|
ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));
|
|
ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov6x30_command(struct i2c_client *c, unsigned int cmd, void *arg)
|
|
{
|
|
switch (cmd) {
|
|
case OVCAMCHIP_CMD_S_CTRL:
|
|
return ov6x30_set_control(c, arg);
|
|
case OVCAMCHIP_CMD_G_CTRL:
|
|
return ov6x30_get_control(c, arg);
|
|
case OVCAMCHIP_CMD_S_MODE:
|
|
return ov6x30_set_window(c, arg);
|
|
default:
|
|
DDEBUG(2, &c->dev, "command not supported: %d", cmd);
|
|
return -ENOIOCTLCMD;
|
|
}
|
|
}
|
|
|
|
struct ovcamchip_ops ov6x30_ops = {
|
|
.init = ov6x30_init,
|
|
.free = ov6x30_free,
|
|
.command = ov6x30_command,
|
|
};
|