linux-sg2042/drivers/gpio/gpio-pca953x.c

1138 lines
30 KiB
C

/*
* PCA953x 4/8/16/24/40 bit I/O ports
*
* Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com>
* Copyright (C) 2007 Marvell International Ltd.
*
* Derived from drivers/i2c/chips/pca9539.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*/
#include <linux/acpi.h>
#include <linux/gpio/driver.h>
#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/platform_data/pca953x.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <asm/unaligned.h>
#define PCA953X_INPUT 0x00
#define PCA953X_OUTPUT 0x01
#define PCA953X_INVERT 0x02
#define PCA953X_DIRECTION 0x03
#define REG_ADDR_MASK 0x3f
#define REG_ADDR_EXT 0x40
#define REG_ADDR_AI 0x80
#define PCA957X_IN 0x00
#define PCA957X_INVRT 0x01
#define PCA957X_BKEN 0x02
#define PCA957X_PUPD 0x03
#define PCA957X_CFG 0x04
#define PCA957X_OUT 0x05
#define PCA957X_MSK 0x06
#define PCA957X_INTS 0x07
#define PCAL953X_OUT_STRENGTH 0x20
#define PCAL953X_IN_LATCH 0x22
#define PCAL953X_PULL_EN 0x23
#define PCAL953X_PULL_SEL 0x24
#define PCAL953X_INT_MASK 0x25
#define PCAL953X_INT_STAT 0x26
#define PCAL953X_OUT_CONF 0x27
#define PCAL6524_INT_EDGE 0x28
#define PCAL6524_INT_CLR 0x2a
#define PCAL6524_IN_STATUS 0x2b
#define PCAL6524_OUT_INDCONF 0x2c
#define PCAL6524_DEBOUNCE 0x2d
#define PCA_GPIO_MASK 0x00FF
#define PCAL_GPIO_MASK 0x1f
#define PCAL_PINCTRL_MASK 0x60
#define PCA_INT 0x0100
#define PCA_PCAL 0x0200
#define PCA_LATCH_INT (PCA_PCAL | PCA_INT)
#define PCA953X_TYPE 0x1000
#define PCA957X_TYPE 0x2000
#define PCA_TYPE_MASK 0xF000
#define PCA_CHIP_TYPE(x) ((x) & PCA_TYPE_MASK)
static const struct i2c_device_id pca953x_id[] = {
{ "pca9505", 40 | PCA953X_TYPE | PCA_INT, },
{ "pca9534", 8 | PCA953X_TYPE | PCA_INT, },
{ "pca9535", 16 | PCA953X_TYPE | PCA_INT, },
{ "pca9536", 4 | PCA953X_TYPE, },
{ "pca9537", 4 | PCA953X_TYPE | PCA_INT, },
{ "pca9538", 8 | PCA953X_TYPE | PCA_INT, },
{ "pca9539", 16 | PCA953X_TYPE | PCA_INT, },
{ "pca9554", 8 | PCA953X_TYPE | PCA_INT, },
{ "pca9555", 16 | PCA953X_TYPE | PCA_INT, },
{ "pca9556", 8 | PCA953X_TYPE, },
{ "pca9557", 8 | PCA953X_TYPE, },
{ "pca9574", 8 | PCA957X_TYPE | PCA_INT, },
{ "pca9575", 16 | PCA957X_TYPE | PCA_INT, },
{ "pca9698", 40 | PCA953X_TYPE, },
{ "pcal6524", 24 | PCA953X_TYPE | PCA_INT | PCA_PCAL, },
{ "pcal9555a", 16 | PCA953X_TYPE | PCA_INT | PCA_PCAL, },
{ "max7310", 8 | PCA953X_TYPE, },
{ "max7312", 16 | PCA953X_TYPE | PCA_INT, },
{ "max7313", 16 | PCA953X_TYPE | PCA_INT, },
{ "max7315", 8 | PCA953X_TYPE | PCA_INT, },
{ "max7318", 16 | PCA953X_TYPE | PCA_INT, },
{ "pca6107", 8 | PCA953X_TYPE | PCA_INT, },
{ "tca6408", 8 | PCA953X_TYPE | PCA_INT, },
{ "tca6416", 16 | PCA953X_TYPE | PCA_INT, },
{ "tca6424", 24 | PCA953X_TYPE | PCA_INT, },
{ "tca9539", 16 | PCA953X_TYPE | PCA_INT, },
{ "tca9554", 8 | PCA953X_TYPE | PCA_INT, },
{ "xra1202", 8 | PCA953X_TYPE },
{ }
};
MODULE_DEVICE_TABLE(i2c, pca953x_id);
static const struct acpi_device_id pca953x_acpi_ids[] = {
{ "INT3491", 16 | PCA953X_TYPE | PCA_INT | PCA_PCAL, },
{ }
};
MODULE_DEVICE_TABLE(acpi, pca953x_acpi_ids);
#define MAX_BANK 5
#define BANK_SZ 8
#define NBANK(chip) DIV_ROUND_UP(chip->gpio_chip.ngpio, BANK_SZ)
struct pca953x_reg_config {
int direction;
int output;
int input;
int invert;
};
static const struct pca953x_reg_config pca953x_regs = {
.direction = PCA953X_DIRECTION,
.output = PCA953X_OUTPUT,
.input = PCA953X_INPUT,
.invert = PCA953X_INVERT,
};
static const struct pca953x_reg_config pca957x_regs = {
.direction = PCA957X_CFG,
.output = PCA957X_OUT,
.input = PCA957X_IN,
.invert = PCA957X_INVRT,
};
struct pca953x_chip {
unsigned gpio_start;
struct mutex i2c_lock;
struct regmap *regmap;
#ifdef CONFIG_GPIO_PCA953X_IRQ
struct mutex irq_lock;
u8 irq_mask[MAX_BANK];
u8 irq_stat[MAX_BANK];
u8 irq_trig_raise[MAX_BANK];
u8 irq_trig_fall[MAX_BANK];
#endif
struct i2c_client *client;
struct gpio_chip gpio_chip;
const char *const *names;
unsigned long driver_data;
struct regulator *regulator;
const struct pca953x_reg_config *regs;
};
static int pca953x_bank_shift(struct pca953x_chip *chip)
{
return fls((chip->gpio_chip.ngpio - 1) / BANK_SZ);
}
#define PCA953x_BANK_INPUT BIT(0)
#define PCA953x_BANK_OUTPUT BIT(1)
#define PCA953x_BANK_POLARITY BIT(2)
#define PCA953x_BANK_CONFIG BIT(3)
#define PCA957x_BANK_INPUT BIT(0)
#define PCA957x_BANK_POLARITY BIT(1)
#define PCA957x_BANK_BUSHOLD BIT(2)
#define PCA957x_BANK_CONFIG BIT(4)
#define PCA957x_BANK_OUTPUT BIT(5)
#define PCAL9xxx_BANK_IN_LATCH BIT(8 + 2)
#define PCAL9xxx_BANK_IRQ_MASK BIT(8 + 5)
#define PCAL9xxx_BANK_IRQ_STAT BIT(8 + 6)
/*
* We care about the following registers:
* - Standard set, below 0x40, each port can be replicated up to 8 times
* - PCA953x standard
* Input port 0x00 + 0 * bank_size R
* Output port 0x00 + 1 * bank_size RW
* Polarity Inversion port 0x00 + 2 * bank_size RW
* Configuration port 0x00 + 3 * bank_size RW
* - PCA957x with mixed up registers
* Input port 0x00 + 0 * bank_size R
* Polarity Inversion port 0x00 + 1 * bank_size RW
* Bus hold port 0x00 + 2 * bank_size RW
* Configuration port 0x00 + 4 * bank_size RW
* Output port 0x00 + 5 * bank_size RW
*
* - Extended set, above 0x40, often chip specific.
* - PCAL6524/PCAL9555A with custom PCAL IRQ handling:
* Input latch register 0x40 + 2 * bank_size RW
* Interrupt mask register 0x40 + 5 * bank_size RW
* Interrupt status register 0x40 + 6 * bank_size R
*
* - Registers with bit 0x80 set, the AI bit
* The bit is cleared and the registers fall into one of the
* categories above.
*/
static bool pca953x_check_register(struct pca953x_chip *chip, unsigned int reg,
u32 checkbank)
{
int bank_shift = pca953x_bank_shift(chip);
int bank = (reg & REG_ADDR_MASK) >> bank_shift;
int offset = reg & (BIT(bank_shift) - 1);
/* Special PCAL extended register check. */
if (reg & REG_ADDR_EXT) {
if (!(chip->driver_data & PCA_PCAL))
return false;
bank += 8;
}
/* Register is not in the matching bank. */
if (!(BIT(bank) & checkbank))
return false;
/* Register is not within allowed range of bank. */
if (offset >= NBANK(chip))
return false;
return true;
}
static bool pca953x_readable_register(struct device *dev, unsigned int reg)
{
struct pca953x_chip *chip = dev_get_drvdata(dev);
u32 bank;
if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE) {
bank = PCA953x_BANK_INPUT | PCA953x_BANK_OUTPUT |
PCA953x_BANK_POLARITY | PCA953x_BANK_CONFIG;
} else {
bank = PCA957x_BANK_INPUT | PCA957x_BANK_OUTPUT |
PCA957x_BANK_POLARITY | PCA957x_BANK_CONFIG |
PCA957x_BANK_BUSHOLD;
}
if (chip->driver_data & PCA_PCAL) {
bank |= PCAL9xxx_BANK_IN_LATCH | PCAL9xxx_BANK_IRQ_MASK |
PCAL9xxx_BANK_IRQ_STAT;
}
return pca953x_check_register(chip, reg, bank);
}
static bool pca953x_writeable_register(struct device *dev, unsigned int reg)
{
struct pca953x_chip *chip = dev_get_drvdata(dev);
u32 bank;
if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE) {
bank = PCA953x_BANK_OUTPUT | PCA953x_BANK_POLARITY |
PCA953x_BANK_CONFIG;
} else {
bank = PCA957x_BANK_OUTPUT | PCA957x_BANK_POLARITY |
PCA957x_BANK_CONFIG | PCA957x_BANK_BUSHOLD;
}
if (chip->driver_data & PCA_PCAL)
bank |= PCAL9xxx_BANK_IN_LATCH | PCAL9xxx_BANK_IRQ_MASK;
return pca953x_check_register(chip, reg, bank);
}
static bool pca953x_volatile_register(struct device *dev, unsigned int reg)
{
struct pca953x_chip *chip = dev_get_drvdata(dev);
u32 bank;
if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE)
bank = PCA953x_BANK_INPUT;
else
bank = PCA957x_BANK_INPUT;
if (chip->driver_data & PCA_PCAL)
bank |= PCAL9xxx_BANK_IRQ_STAT;
return pca953x_check_register(chip, reg, bank);
}
static const struct regmap_config pca953x_i2c_regmap = {
.reg_bits = 8,
.val_bits = 8,
.readable_reg = pca953x_readable_register,
.writeable_reg = pca953x_writeable_register,
.volatile_reg = pca953x_volatile_register,
.cache_type = REGCACHE_RBTREE,
.max_register = 0x7f,
};
static u8 pca953x_recalc_addr(struct pca953x_chip *chip, int reg, int off,
bool write, bool addrinc)
{
int bank_shift = pca953x_bank_shift(chip);
int addr = (reg & PCAL_GPIO_MASK) << bank_shift;
int pinctrl = (reg & PCAL_PINCTRL_MASK) << 1;
u8 regaddr = pinctrl | addr | (off / BANK_SZ);
/* Single byte read doesn't need AI bit set. */
if (!addrinc)
return regaddr;
/* Chips with 24 and more GPIOs always support Auto Increment */
if (write && NBANK(chip) > 2)
regaddr |= REG_ADDR_AI;
/* PCA9575 needs address-increment on multi-byte writes */
if (PCA_CHIP_TYPE(chip->driver_data) == PCA957X_TYPE)
regaddr |= REG_ADDR_AI;
return regaddr;
}
static int pca953x_write_regs(struct pca953x_chip *chip, int reg, u8 *val)
{
u8 regaddr = pca953x_recalc_addr(chip, reg, 0, true, true);
int ret;
ret = regmap_bulk_write(chip->regmap, regaddr, val, NBANK(chip));
if (ret < 0) {
dev_err(&chip->client->dev, "failed writing register\n");
return ret;
}
return 0;
}
static int pca953x_read_regs(struct pca953x_chip *chip, int reg, u8 *val)
{
u8 regaddr = pca953x_recalc_addr(chip, reg, 0, false, true);
int ret;
ret = regmap_bulk_read(chip->regmap, regaddr, val, NBANK(chip));
if (ret < 0) {
dev_err(&chip->client->dev, "failed reading register\n");
return ret;
}
return 0;
}
static int pca953x_gpio_direction_input(struct gpio_chip *gc, unsigned off)
{
struct pca953x_chip *chip = gpiochip_get_data(gc);
u8 dirreg = pca953x_recalc_addr(chip, chip->regs->direction, off,
true, false);
u8 bit = BIT(off % BANK_SZ);
int ret;
mutex_lock(&chip->i2c_lock);
ret = regmap_write_bits(chip->regmap, dirreg, bit, bit);
mutex_unlock(&chip->i2c_lock);
return ret;
}
static int pca953x_gpio_direction_output(struct gpio_chip *gc,
unsigned off, int val)
{
struct pca953x_chip *chip = gpiochip_get_data(gc);
u8 dirreg = pca953x_recalc_addr(chip, chip->regs->direction, off,
true, false);
u8 outreg = pca953x_recalc_addr(chip, chip->regs->output, off,
true, false);
u8 bit = BIT(off % BANK_SZ);
int ret;
mutex_lock(&chip->i2c_lock);
/* set output level */
ret = regmap_write_bits(chip->regmap, outreg, bit, val ? bit : 0);
if (ret)
goto exit;
/* then direction */
ret = regmap_write_bits(chip->regmap, dirreg, bit, 0);
exit:
mutex_unlock(&chip->i2c_lock);
return ret;
}
static int pca953x_gpio_get_value(struct gpio_chip *gc, unsigned off)
{
struct pca953x_chip *chip = gpiochip_get_data(gc);
u8 inreg = pca953x_recalc_addr(chip, chip->regs->input, off,
true, false);
u8 bit = BIT(off % BANK_SZ);
u32 reg_val;
int ret;
mutex_lock(&chip->i2c_lock);
ret = regmap_read(chip->regmap, inreg, &reg_val);
mutex_unlock(&chip->i2c_lock);
if (ret < 0) {
/* NOTE: diagnostic already emitted; that's all we should
* do unless gpio_*_value_cansleep() calls become different
* from their nonsleeping siblings (and report faults).
*/
return 0;
}
return !!(reg_val & bit);
}
static void pca953x_gpio_set_value(struct gpio_chip *gc, unsigned off, int val)
{
struct pca953x_chip *chip = gpiochip_get_data(gc);
u8 outreg = pca953x_recalc_addr(chip, chip->regs->output, off,
true, false);
u8 bit = BIT(off % BANK_SZ);
mutex_lock(&chip->i2c_lock);
regmap_write_bits(chip->regmap, outreg, bit, val ? bit : 0);
mutex_unlock(&chip->i2c_lock);
}
static int pca953x_gpio_get_direction(struct gpio_chip *gc, unsigned off)
{
struct pca953x_chip *chip = gpiochip_get_data(gc);
u8 dirreg = pca953x_recalc_addr(chip, chip->regs->direction, off,
true, false);
u8 bit = BIT(off % BANK_SZ);
u32 reg_val;
int ret;
mutex_lock(&chip->i2c_lock);
ret = regmap_read(chip->regmap, dirreg, &reg_val);
mutex_unlock(&chip->i2c_lock);
if (ret < 0)
return ret;
return !!(reg_val & bit);
}
static void pca953x_gpio_set_multiple(struct gpio_chip *gc,
unsigned long *mask, unsigned long *bits)
{
struct pca953x_chip *chip = gpiochip_get_data(gc);
unsigned int bank_mask, bank_val;
int bank;
u8 reg_val[MAX_BANK];
int ret;
mutex_lock(&chip->i2c_lock);
ret = pca953x_read_regs(chip, chip->regs->output, reg_val);
if (ret)
goto exit;
for (bank = 0; bank < NBANK(chip); bank++) {
bank_mask = mask[bank / sizeof(*mask)] >>
((bank % sizeof(*mask)) * 8);
if (bank_mask) {
bank_val = bits[bank / sizeof(*bits)] >>
((bank % sizeof(*bits)) * 8);
bank_val &= bank_mask;
reg_val[bank] = (reg_val[bank] & ~bank_mask) | bank_val;
}
}
pca953x_write_regs(chip, chip->regs->output, reg_val);
exit:
mutex_unlock(&chip->i2c_lock);
}
static void pca953x_setup_gpio(struct pca953x_chip *chip, int gpios)
{
struct gpio_chip *gc;
gc = &chip->gpio_chip;
gc->direction_input = pca953x_gpio_direction_input;
gc->direction_output = pca953x_gpio_direction_output;
gc->get = pca953x_gpio_get_value;
gc->set = pca953x_gpio_set_value;
gc->get_direction = pca953x_gpio_get_direction;
gc->set_multiple = pca953x_gpio_set_multiple;
gc->can_sleep = true;
gc->base = chip->gpio_start;
gc->ngpio = gpios;
gc->label = dev_name(&chip->client->dev);
gc->parent = &chip->client->dev;
gc->owner = THIS_MODULE;
gc->names = chip->names;
}
#ifdef CONFIG_GPIO_PCA953X_IRQ
static void pca953x_irq_mask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct pca953x_chip *chip = gpiochip_get_data(gc);
chip->irq_mask[d->hwirq / BANK_SZ] &= ~(1 << (d->hwirq % BANK_SZ));
}
static void pca953x_irq_unmask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct pca953x_chip *chip = gpiochip_get_data(gc);
chip->irq_mask[d->hwirq / BANK_SZ] |= 1 << (d->hwirq % BANK_SZ);
}
static void pca953x_irq_bus_lock(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct pca953x_chip *chip = gpiochip_get_data(gc);
mutex_lock(&chip->irq_lock);
}
static void pca953x_irq_bus_sync_unlock(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct pca953x_chip *chip = gpiochip_get_data(gc);
u8 new_irqs;
int level, i;
u8 invert_irq_mask[MAX_BANK];
int reg_direction[MAX_BANK];
regmap_bulk_read(chip->regmap, chip->regs->direction, reg_direction,
NBANK(chip));
if (chip->driver_data & PCA_PCAL) {
/* Enable latch on interrupt-enabled inputs */
pca953x_write_regs(chip, PCAL953X_IN_LATCH, chip->irq_mask);
for (i = 0; i < NBANK(chip); i++)
invert_irq_mask[i] = ~chip->irq_mask[i];
/* Unmask enabled interrupts */
pca953x_write_regs(chip, PCAL953X_INT_MASK, invert_irq_mask);
}
/* Look for any newly setup interrupt */
for (i = 0; i < NBANK(chip); i++) {
new_irqs = chip->irq_trig_fall[i] | chip->irq_trig_raise[i];
new_irqs &= reg_direction[i];
while (new_irqs) {
level = __ffs(new_irqs);
pca953x_gpio_direction_input(&chip->gpio_chip,
level + (BANK_SZ * i));
new_irqs &= ~(1 << level);
}
}
mutex_unlock(&chip->irq_lock);
}
static int pca953x_irq_set_type(struct irq_data *d, unsigned int type)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct pca953x_chip *chip = gpiochip_get_data(gc);
int bank_nb = d->hwirq / BANK_SZ;
u8 mask = 1 << (d->hwirq % BANK_SZ);
if (!(type & IRQ_TYPE_EDGE_BOTH)) {
dev_err(&chip->client->dev, "irq %d: unsupported type %d\n",
d->irq, type);
return -EINVAL;
}
if (type & IRQ_TYPE_EDGE_FALLING)
chip->irq_trig_fall[bank_nb] |= mask;
else
chip->irq_trig_fall[bank_nb] &= ~mask;
if (type & IRQ_TYPE_EDGE_RISING)
chip->irq_trig_raise[bank_nb] |= mask;
else
chip->irq_trig_raise[bank_nb] &= ~mask;
return 0;
}
static void pca953x_irq_shutdown(struct irq_data *d)
{
struct pca953x_chip *chip = irq_data_get_irq_chip_data(d);
u8 mask = 1 << (d->hwirq % BANK_SZ);
chip->irq_trig_raise[d->hwirq / BANK_SZ] &= ~mask;
chip->irq_trig_fall[d->hwirq / BANK_SZ] &= ~mask;
}
static struct irq_chip pca953x_irq_chip = {
.name = "pca953x",
.irq_mask = pca953x_irq_mask,
.irq_unmask = pca953x_irq_unmask,
.irq_bus_lock = pca953x_irq_bus_lock,
.irq_bus_sync_unlock = pca953x_irq_bus_sync_unlock,
.irq_set_type = pca953x_irq_set_type,
.irq_shutdown = pca953x_irq_shutdown,
};
static bool pca953x_irq_pending(struct pca953x_chip *chip, u8 *pending)
{
u8 cur_stat[MAX_BANK];
u8 old_stat[MAX_BANK];
bool pending_seen = false;
bool trigger_seen = false;
u8 trigger[MAX_BANK];
int reg_direction[MAX_BANK];
int ret, i;
if (chip->driver_data & PCA_PCAL) {
/* Read the current interrupt status from the device */
ret = pca953x_read_regs(chip, PCAL953X_INT_STAT, trigger);
if (ret)
return false;
/* Check latched inputs and clear interrupt status */
ret = pca953x_read_regs(chip, PCA953X_INPUT, cur_stat);
if (ret)
return false;
for (i = 0; i < NBANK(chip); i++) {
/* Apply filter for rising/falling edge selection */
pending[i] = (~cur_stat[i] & chip->irq_trig_fall[i]) |
(cur_stat[i] & chip->irq_trig_raise[i]);
pending[i] &= trigger[i];
if (pending[i])
pending_seen = true;
}
return pending_seen;
}
ret = pca953x_read_regs(chip, chip->regs->input, cur_stat);
if (ret)
return false;
/* Remove output pins from the equation */
regmap_bulk_read(chip->regmap, chip->regs->direction, reg_direction,
NBANK(chip));
for (i = 0; i < NBANK(chip); i++)
cur_stat[i] &= reg_direction[i];
memcpy(old_stat, chip->irq_stat, NBANK(chip));
for (i = 0; i < NBANK(chip); i++) {
trigger[i] = (cur_stat[i] ^ old_stat[i]) & chip->irq_mask[i];
if (trigger[i])
trigger_seen = true;
}
if (!trigger_seen)
return false;
memcpy(chip->irq_stat, cur_stat, NBANK(chip));
for (i = 0; i < NBANK(chip); i++) {
pending[i] = (old_stat[i] & chip->irq_trig_fall[i]) |
(cur_stat[i] & chip->irq_trig_raise[i]);
pending[i] &= trigger[i];
if (pending[i])
pending_seen = true;
}
return pending_seen;
}
static irqreturn_t pca953x_irq_handler(int irq, void *devid)
{
struct pca953x_chip *chip = devid;
u8 pending[MAX_BANK];
u8 level;
unsigned nhandled = 0;
int i;
if (!pca953x_irq_pending(chip, pending))
return IRQ_NONE;
for (i = 0; i < NBANK(chip); i++) {
while (pending[i]) {
level = __ffs(pending[i]);
handle_nested_irq(irq_find_mapping(chip->gpio_chip.irq.domain,
level + (BANK_SZ * i)));
pending[i] &= ~(1 << level);
nhandled++;
}
}
return (nhandled > 0) ? IRQ_HANDLED : IRQ_NONE;
}
static int pca953x_irq_setup(struct pca953x_chip *chip,
int irq_base)
{
struct i2c_client *client = chip->client;
int reg_direction[MAX_BANK];
int ret, i;
if (client->irq && irq_base != -1
&& (chip->driver_data & PCA_INT)) {
ret = pca953x_read_regs(chip,
chip->regs->input, chip->irq_stat);
if (ret)
return ret;
/*
* There is no way to know which GPIO line generated the
* interrupt. We have to rely on the previous read for
* this purpose.
*/
regmap_bulk_read(chip->regmap, chip->regs->direction,
reg_direction, NBANK(chip));
for (i = 0; i < NBANK(chip); i++)
chip->irq_stat[i] &= reg_direction[i];
mutex_init(&chip->irq_lock);
ret = devm_request_threaded_irq(&client->dev,
client->irq,
NULL,
pca953x_irq_handler,
IRQF_TRIGGER_LOW | IRQF_ONESHOT |
IRQF_SHARED,
dev_name(&client->dev), chip);
if (ret) {
dev_err(&client->dev, "failed to request irq %d\n",
client->irq);
return ret;
}
ret = gpiochip_irqchip_add_nested(&chip->gpio_chip,
&pca953x_irq_chip,
irq_base,
handle_simple_irq,
IRQ_TYPE_NONE);
if (ret) {
dev_err(&client->dev,
"could not connect irqchip to gpiochip\n");
return ret;
}
gpiochip_set_nested_irqchip(&chip->gpio_chip,
&pca953x_irq_chip,
client->irq);
}
return 0;
}
#else /* CONFIG_GPIO_PCA953X_IRQ */
static int pca953x_irq_setup(struct pca953x_chip *chip,
int irq_base)
{
struct i2c_client *client = chip->client;
if (client->irq && irq_base != -1 && (chip->driver_data & PCA_INT))
dev_warn(&client->dev, "interrupt support not compiled in\n");
return 0;
}
#endif
static int device_pca95xx_init(struct pca953x_chip *chip, u32 invert)
{
int ret;
u8 val[MAX_BANK];
ret = regcache_sync_region(chip->regmap, chip->regs->output,
chip->regs->output + NBANK(chip));
if (ret != 0)
goto out;
ret = regcache_sync_region(chip->regmap, chip->regs->direction,
chip->regs->direction + NBANK(chip));
if (ret != 0)
goto out;
/* set platform specific polarity inversion */
if (invert)
memset(val, 0xFF, NBANK(chip));
else
memset(val, 0, NBANK(chip));
ret = pca953x_write_regs(chip, chip->regs->invert, val);
out:
return ret;
}
static int device_pca957x_init(struct pca953x_chip *chip, u32 invert)
{
int ret;
u8 val[MAX_BANK];
ret = device_pca95xx_init(chip, invert);
if (ret)
goto out;
/* To enable register 6, 7 to control pull up and pull down */
memset(val, 0x02, NBANK(chip));
ret = pca953x_write_regs(chip, PCA957X_BKEN, val);
if (ret)
goto out;
return 0;
out:
return ret;
}
static const struct of_device_id pca953x_dt_ids[];
static int pca953x_probe(struct i2c_client *client,
const struct i2c_device_id *i2c_id)
{
struct pca953x_platform_data *pdata;
struct pca953x_chip *chip;
int irq_base = 0;
int ret;
u32 invert = 0;
struct regulator *reg;
chip = devm_kzalloc(&client->dev,
sizeof(struct pca953x_chip), GFP_KERNEL);
if (chip == NULL)
return -ENOMEM;
pdata = dev_get_platdata(&client->dev);
if (pdata) {
irq_base = pdata->irq_base;
chip->gpio_start = pdata->gpio_base;
invert = pdata->invert;
chip->names = pdata->names;
} else {
struct gpio_desc *reset_gpio;
chip->gpio_start = -1;
irq_base = 0;
/*
* See if we need to de-assert a reset pin.
*
* There is no known ACPI-enabled platforms that are
* using "reset" GPIO. Otherwise any of those platform
* must use _DSD method with corresponding property.
*/
reset_gpio = devm_gpiod_get_optional(&client->dev, "reset",
GPIOD_OUT_LOW);
if (IS_ERR(reset_gpio))
return PTR_ERR(reset_gpio);
}
chip->client = client;
reg = devm_regulator_get(&client->dev, "vcc");
if (IS_ERR(reg)) {
ret = PTR_ERR(reg);
if (ret != -EPROBE_DEFER)
dev_err(&client->dev, "reg get err: %d\n", ret);
return ret;
}
ret = regulator_enable(reg);
if (ret) {
dev_err(&client->dev, "reg en err: %d\n", ret);
return ret;
}
chip->regulator = reg;
if (i2c_id) {
chip->driver_data = i2c_id->driver_data;
} else {
const struct acpi_device_id *acpi_id;
struct device *dev = &client->dev;
chip->driver_data = (uintptr_t)of_device_get_match_data(dev);
if (!chip->driver_data) {
acpi_id = acpi_match_device(pca953x_acpi_ids, dev);
if (!acpi_id) {
ret = -ENODEV;
goto err_exit;
}
chip->driver_data = acpi_id->driver_data;
}
}
i2c_set_clientdata(client, chip);
chip->regmap = devm_regmap_init_i2c(client, &pca953x_i2c_regmap);
if (IS_ERR(chip->regmap)) {
ret = PTR_ERR(chip->regmap);
goto err_exit;
}
regcache_mark_dirty(chip->regmap);
mutex_init(&chip->i2c_lock);
/*
* In case we have an i2c-mux controlled by a GPIO provided by an
* expander using the same driver higher on the device tree, read the
* i2c adapter nesting depth and use the retrieved value as lockdep
* subclass for chip->i2c_lock.
*
* REVISIT: This solution is not complete. It protects us from lockdep
* false positives when the expander controlling the i2c-mux is on
* a different level on the device tree, but not when it's on the same
* level on a different branch (in which case the subclass number
* would be the same).
*
* TODO: Once a correct solution is developed, a similar fix should be
* applied to all other i2c-controlled GPIO expanders (and potentially
* regmap-i2c).
*/
lockdep_set_subclass(&chip->i2c_lock,
i2c_adapter_depth(client->adapter));
/* initialize cached registers from their original values.
* we can't share this chip with another i2c master.
*/
pca953x_setup_gpio(chip, chip->driver_data & PCA_GPIO_MASK);
if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE) {
chip->regs = &pca953x_regs;
ret = device_pca95xx_init(chip, invert);
} else {
chip->regs = &pca957x_regs;
ret = device_pca957x_init(chip, invert);
}
if (ret)
goto err_exit;
ret = devm_gpiochip_add_data(&client->dev, &chip->gpio_chip, chip);
if (ret)
goto err_exit;
ret = pca953x_irq_setup(chip, irq_base);
if (ret)
goto err_exit;
if (pdata && pdata->setup) {
ret = pdata->setup(client, chip->gpio_chip.base,
chip->gpio_chip.ngpio, pdata->context);
if (ret < 0)
dev_warn(&client->dev, "setup failed, %d\n", ret);
}
return 0;
err_exit:
regulator_disable(chip->regulator);
return ret;
}
static int pca953x_remove(struct i2c_client *client)
{
struct pca953x_platform_data *pdata = dev_get_platdata(&client->dev);
struct pca953x_chip *chip = i2c_get_clientdata(client);
int ret;
if (pdata && pdata->teardown) {
ret = pdata->teardown(client, chip->gpio_chip.base,
chip->gpio_chip.ngpio, pdata->context);
if (ret < 0)
dev_err(&client->dev, "%s failed, %d\n",
"teardown", ret);
} else {
ret = 0;
}
regulator_disable(chip->regulator);
return ret;
}
#ifdef CONFIG_PM_SLEEP
static int pca953x_regcache_sync(struct device *dev)
{
struct pca953x_chip *chip = dev_get_drvdata(dev);
int ret;
/*
* The ordering between direction and output is important,
* sync these registers first and only then sync the rest.
*/
ret = regcache_sync_region(chip->regmap, chip->regs->direction,
chip->regs->direction + NBANK(chip));
if (ret != 0) {
dev_err(dev, "Failed to sync GPIO dir registers: %d\n", ret);
return ret;
}
ret = regcache_sync_region(chip->regmap, chip->regs->output,
chip->regs->output + NBANK(chip));
if (ret != 0) {
dev_err(dev, "Failed to sync GPIO out registers: %d\n", ret);
return ret;
}
#ifdef CONFIG_GPIO_PCA953X_IRQ
if (chip->driver_data & PCA_PCAL) {
ret = regcache_sync_region(chip->regmap, PCAL953X_IN_LATCH,
PCAL953X_IN_LATCH + NBANK(chip));
if (ret != 0) {
dev_err(dev, "Failed to sync INT latch registers: %d\n",
ret);
return ret;
}
ret = regcache_sync_region(chip->regmap, PCAL953X_INT_MASK,
PCAL953X_INT_MASK + NBANK(chip));
if (ret != 0) {
dev_err(dev, "Failed to sync INT mask registers: %d\n",
ret);
return ret;
}
}
#endif
return 0;
}
static int pca953x_suspend(struct device *dev)
{
struct pca953x_chip *chip = dev_get_drvdata(dev);
regcache_cache_only(chip->regmap, true);
regulator_disable(chip->regulator);
return 0;
}
static int pca953x_resume(struct device *dev)
{
struct pca953x_chip *chip = dev_get_drvdata(dev);
int ret;
ret = regulator_enable(chip->regulator);
if (ret != 0) {
dev_err(dev, "Failed to enable regulator: %d\n", ret);
return 0;
}
regcache_cache_only(chip->regmap, false);
regcache_mark_dirty(chip->regmap);
ret = pca953x_regcache_sync(dev);
if (ret)
return ret;
ret = regcache_sync(chip->regmap);
if (ret != 0) {
dev_err(dev, "Failed to restore register map: %d\n", ret);
return ret;
}
return 0;
}
#endif
/* convenience to stop overlong match-table lines */
#define OF_953X(__nrgpio, __int) (void *)(__nrgpio | PCA953X_TYPE | __int)
#define OF_957X(__nrgpio, __int) (void *)(__nrgpio | PCA957X_TYPE | __int)
static const struct of_device_id pca953x_dt_ids[] = {
{ .compatible = "nxp,pca9505", .data = OF_953X(40, PCA_INT), },
{ .compatible = "nxp,pca9534", .data = OF_953X( 8, PCA_INT), },
{ .compatible = "nxp,pca9535", .data = OF_953X(16, PCA_INT), },
{ .compatible = "nxp,pca9536", .data = OF_953X( 4, 0), },
{ .compatible = "nxp,pca9537", .data = OF_953X( 4, PCA_INT), },
{ .compatible = "nxp,pca9538", .data = OF_953X( 8, PCA_INT), },
{ .compatible = "nxp,pca9539", .data = OF_953X(16, PCA_INT), },
{ .compatible = "nxp,pca9554", .data = OF_953X( 8, PCA_INT), },
{ .compatible = "nxp,pca9555", .data = OF_953X(16, PCA_INT), },
{ .compatible = "nxp,pca9556", .data = OF_953X( 8, 0), },
{ .compatible = "nxp,pca9557", .data = OF_953X( 8, 0), },
{ .compatible = "nxp,pca9574", .data = OF_957X( 8, PCA_INT), },
{ .compatible = "nxp,pca9575", .data = OF_957X(16, PCA_INT), },
{ .compatible = "nxp,pca9698", .data = OF_953X(40, 0), },
{ .compatible = "nxp,pcal6524", .data = OF_953X(24, PCA_LATCH_INT), },
{ .compatible = "nxp,pcal9555a", .data = OF_953X(16, PCA_LATCH_INT), },
{ .compatible = "maxim,max7310", .data = OF_953X( 8, 0), },
{ .compatible = "maxim,max7312", .data = OF_953X(16, PCA_INT), },
{ .compatible = "maxim,max7313", .data = OF_953X(16, PCA_INT), },
{ .compatible = "maxim,max7315", .data = OF_953X( 8, PCA_INT), },
{ .compatible = "maxim,max7318", .data = OF_953X(16, PCA_INT), },
{ .compatible = "ti,pca6107", .data = OF_953X( 8, PCA_INT), },
{ .compatible = "ti,pca9536", .data = OF_953X( 4, 0), },
{ .compatible = "ti,tca6408", .data = OF_953X( 8, PCA_INT), },
{ .compatible = "ti,tca6416", .data = OF_953X(16, PCA_INT), },
{ .compatible = "ti,tca6424", .data = OF_953X(24, PCA_INT), },
{ .compatible = "onnn,pca9654", .data = OF_953X( 8, PCA_INT), },
{ .compatible = "exar,xra1202", .data = OF_953X( 8, 0), },
{ }
};
MODULE_DEVICE_TABLE(of, pca953x_dt_ids);
static SIMPLE_DEV_PM_OPS(pca953x_pm_ops, pca953x_suspend, pca953x_resume);
static struct i2c_driver pca953x_driver = {
.driver = {
.name = "pca953x",
.pm = &pca953x_pm_ops,
.of_match_table = pca953x_dt_ids,
.acpi_match_table = ACPI_PTR(pca953x_acpi_ids),
},
.probe = pca953x_probe,
.remove = pca953x_remove,
.id_table = pca953x_id,
};
static int __init pca953x_init(void)
{
return i2c_add_driver(&pca953x_driver);
}
/* register after i2c postcore initcall and before
* subsys initcalls that may rely on these GPIOs
*/
subsys_initcall(pca953x_init);
static void __exit pca953x_exit(void)
{
i2c_del_driver(&pca953x_driver);
}
module_exit(pca953x_exit);
MODULE_AUTHOR("eric miao <eric.miao@marvell.com>");
MODULE_DESCRIPTION("GPIO expander driver for PCA953x");
MODULE_LICENSE("GPL");