linux-sg2042/arch/arm/mach-pxa/idp.h

196 lines
5.7 KiB
C

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* arch/arm/mach-pxa/include/mach/idp.h
*
* Copyright (c) 2001 Cliff Brake, Accelent Systems Inc.
*
* 2001-09-13: Cliff Brake <cbrake@accelent.com>
* Initial code
*
* 2005-02-15: Cliff Brake <cliff.brake@gmail.com>
* <http://www.vibren.com> <http://bec-systems.com>
* Changes for 2.6 kernel.
*/
/*
* Note: this file must be safe to include in assembly files
*
* Support for the Vibren PXA255 IDP requires rev04 or later
* IDP hardware.
*/
#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
#define IDP_FLASH_PHYS (PXA_CS0_PHYS)
#define IDP_ALT_FLASH_PHYS (PXA_CS1_PHYS)
#define IDP_MEDIAQ_PHYS (PXA_CS3_PHYS)
#define IDP_IDE_PHYS (PXA_CS5_PHYS + 0x03000000)
#define IDP_ETH_PHYS (PXA_CS5_PHYS + 0x03400000)
#define IDP_COREVOLT_PHYS (PXA_CS5_PHYS + 0x03800000)
#define IDP_CPLD_PHYS (PXA_CS5_PHYS + 0x03C00000)
/*
* virtual memory map
*/
#define IDP_COREVOLT_VIRT (0xf0000000)
#define IDP_COREVOLT_SIZE (1*1024*1024)
#define IDP_CPLD_VIRT (IDP_COREVOLT_VIRT + IDP_COREVOLT_SIZE)
#define IDP_CPLD_SIZE (1*1024*1024)
#if (IDP_CPLD_VIRT + IDP_CPLD_SIZE) > 0xfc000000
#error Your custom IO space is getting a bit large !!
#endif
#define CPLD_P2V(x) ((x) - IDP_CPLD_PHYS + IDP_CPLD_VIRT)
#define CPLD_V2P(x) ((x) - IDP_CPLD_VIRT + IDP_CPLD_PHYS)
#ifndef __ASSEMBLY__
# define __CPLD_REG(x) (*((volatile unsigned long *)CPLD_P2V(x)))
#else
# define __CPLD_REG(x) CPLD_P2V(x)
#endif
/* board level registers in the CPLD: (offsets from CPLD_VIRT) */
#define _IDP_CPLD_REV (IDP_CPLD_PHYS + 0x00)
#define _IDP_CPLD_PERIPH_PWR (IDP_CPLD_PHYS + 0x04)
#define _IDP_CPLD_LED_CONTROL (IDP_CPLD_PHYS + 0x08)
#define _IDP_CPLD_KB_COL_HIGH (IDP_CPLD_PHYS + 0x0C)
#define _IDP_CPLD_KB_COL_LOW (IDP_CPLD_PHYS + 0x10)
#define _IDP_CPLD_PCCARD_EN (IDP_CPLD_PHYS + 0x14)
#define _IDP_CPLD_GPIOH_DIR (IDP_CPLD_PHYS + 0x18)
#define _IDP_CPLD_GPIOH_VALUE (IDP_CPLD_PHYS + 0x1C)
#define _IDP_CPLD_GPIOL_DIR (IDP_CPLD_PHYS + 0x20)
#define _IDP_CPLD_GPIOL_VALUE (IDP_CPLD_PHYS + 0x24)
#define _IDP_CPLD_PCCARD_PWR (IDP_CPLD_PHYS + 0x28)
#define _IDP_CPLD_MISC_CTRL (IDP_CPLD_PHYS + 0x2C)
#define _IDP_CPLD_LCD (IDP_CPLD_PHYS + 0x30)
#define _IDP_CPLD_FLASH_WE (IDP_CPLD_PHYS + 0x34)
#define _IDP_CPLD_KB_ROW (IDP_CPLD_PHYS + 0x50)
#define _IDP_CPLD_PCCARD0_STATUS (IDP_CPLD_PHYS + 0x54)
#define _IDP_CPLD_PCCARD1_STATUS (IDP_CPLD_PHYS + 0x58)
#define _IDP_CPLD_MISC_STATUS (IDP_CPLD_PHYS + 0x5C)
/* FPGA register virtual addresses */
#define IDP_CPLD_REV __CPLD_REG(_IDP_CPLD_REV)
#define IDP_CPLD_PERIPH_PWR __CPLD_REG(_IDP_CPLD_PERIPH_PWR)
#define IDP_CPLD_LED_CONTROL __CPLD_REG(_IDP_CPLD_LED_CONTROL)
#define IDP_CPLD_KB_COL_HIGH __CPLD_REG(_IDP_CPLD_KB_COL_HIGH)
#define IDP_CPLD_KB_COL_LOW __CPLD_REG(_IDP_CPLD_KB_COL_LOW)
#define IDP_CPLD_PCCARD_EN __CPLD_REG(_IDP_CPLD_PCCARD_EN)
#define IDP_CPLD_GPIOH_DIR __CPLD_REG(_IDP_CPLD_GPIOH_DIR)
#define IDP_CPLD_GPIOH_VALUE __CPLD_REG(_IDP_CPLD_GPIOH_VALUE)
#define IDP_CPLD_GPIOL_DIR __CPLD_REG(_IDP_CPLD_GPIOL_DIR)
#define IDP_CPLD_GPIOL_VALUE __CPLD_REG(_IDP_CPLD_GPIOL_VALUE)
#define IDP_CPLD_PCCARD_PWR __CPLD_REG(_IDP_CPLD_PCCARD_PWR)
#define IDP_CPLD_MISC_CTRL __CPLD_REG(_IDP_CPLD_MISC_CTRL)
#define IDP_CPLD_LCD __CPLD_REG(_IDP_CPLD_LCD)
#define IDP_CPLD_FLASH_WE __CPLD_REG(_IDP_CPLD_FLASH_WE)
#define IDP_CPLD_KB_ROW __CPLD_REG(_IDP_CPLD_KB_ROW)
#define IDP_CPLD_PCCARD0_STATUS __CPLD_REG(_IDP_CPLD_PCCARD0_STATUS)
#define IDP_CPLD_PCCARD1_STATUS __CPLD_REG(_IDP_CPLD_PCCARD1_STATUS)
#define IDP_CPLD_MISC_STATUS __CPLD_REG(_IDP_CPLD_MISC_STATUS)
/*
* Bit masks for various registers
*/
// IDP_CPLD_PCCARD_PWR
#define PCC0_PWR0 (1 << 0)
#define PCC0_PWR1 (1 << 1)
#define PCC0_PWR2 (1 << 2)
#define PCC0_PWR3 (1 << 3)
#define PCC1_PWR0 (1 << 4)
#define PCC1_PWR1 (1 << 5)
#define PCC1_PWR2 (1 << 6)
#define PCC1_PWR3 (1 << 7)
// IDP_CPLD_PCCARD_EN
#define PCC0_RESET (1 << 6)
#define PCC1_RESET (1 << 7)
#define PCC0_ENABLE (1 << 0)
#define PCC1_ENABLE (1 << 1)
// IDP_CPLD_PCCARDx_STATUS
#define _PCC_WRPROT (1 << 7) // 7-4 read as low true
#define _PCC_RESET (1 << 6)
#define _PCC_IRQ (1 << 5)
#define _PCC_INPACK (1 << 4)
#define PCC_BVD2 (1 << 3)
#define PCC_BVD1 (1 << 2)
#define PCC_VS2 (1 << 1)
#define PCC_VS1 (1 << 0)
/* A listing of interrupts used by external hardware devices */
#define TOUCH_PANEL_IRQ PXA_GPIO_TO_IRQ(5)
#define IDE_IRQ PXA_GPIO_TO_IRQ(21)
#define TOUCH_PANEL_IRQ_EDGE IRQ_TYPE_EDGE_FALLING
#define ETHERNET_IRQ PXA_GPIO_TO_IRQ(4)
#define ETHERNET_IRQ_EDGE IRQ_TYPE_EDGE_RISING
#define IDE_IRQ_EDGE IRQ_TYPE_EDGE_RISING
#define PCMCIA_S0_CD_VALID PXA_GPIO_TO_IRQ(7)
#define PCMCIA_S0_CD_VALID_EDGE IRQ_TYPE_EDGE_BOTH
#define PCMCIA_S1_CD_VALID PXA_GPIO_TO_IRQ(8)
#define PCMCIA_S1_CD_VALID_EDGE IRQ_TYPE_EDGE_BOTH
#define PCMCIA_S0_RDYINT PXA_GPIO_TO_IRQ(19)
#define PCMCIA_S1_RDYINT PXA_GPIO_TO_IRQ(22)
/*
* Macros for LED Driver
*/
/* leds 0 = ON */
#define IDP_HB_LED (1<<5)
#define IDP_BUSY_LED (1<<6)
#define IDP_LEDS_MASK (IDP_HB_LED | IDP_BUSY_LED)
/*
* macros for MTD driver
*/
#define FLASH_WRITE_PROTECT_DISABLE() ((IDP_CPLD_FLASH_WE) &= ~(0x1))
#define FLASH_WRITE_PROTECT_ENABLE() ((IDP_CPLD_FLASH_WE) |= (0x1))
/*
* macros for matrix keyboard driver
*/
#define KEYBD_MATRIX_NUMBER_INPUTS 7
#define KEYBD_MATRIX_NUMBER_OUTPUTS 14
#define KEYBD_MATRIX_INVERT_OUTPUT_LOGIC FALSE
#define KEYBD_MATRIX_INVERT_INPUT_LOGIC FALSE
#define KEYBD_MATRIX_SETTLING_TIME_US 100
#define KEYBD_MATRIX_KEYSTATE_DEBOUNCE_CONSTANT 2
#define KEYBD_MATRIX_SET_OUTPUTS(outputs) \
{\
IDP_CPLD_KB_COL_LOW = outputs;\
IDP_CPLD_KB_COL_HIGH = outputs >> 7;\
}
#define KEYBD_MATRIX_GET_INPUTS(inputs) \
{\
inputs = (IDP_CPLD_KB_ROW & 0x7f);\
}