726 lines
18 KiB
C
726 lines
18 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* linux/arch/arm/mach-pxa/mainstone.c
|
|
*
|
|
* Support for the Intel HCDDBBVA0 Development Platform.
|
|
* (go figure how they came up with such name...)
|
|
*
|
|
* Author: Nicolas Pitre
|
|
* Created: Nov 05, 2002
|
|
* Copyright: MontaVista Software Inc.
|
|
*/
|
|
#include <linux/gpio.h>
|
|
#include <linux/gpio/gpio-reg.h>
|
|
#include <linux/gpio/machine.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/syscore_ops.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/input.h>
|
|
#include <linux/gpio_keys.h>
|
|
#include <linux/pwm.h>
|
|
#include <linux/pwm_backlight.h>
|
|
#include <linux/smc91x.h>
|
|
#include <linux/platform_data/i2c-pxa.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/leds.h>
|
|
|
|
#include <asm/types.h>
|
|
#include <asm/setup.h>
|
|
#include <asm/memory.h>
|
|
#include <asm/mach-types.h>
|
|
#include <mach/hardware.h>
|
|
#include <asm/irq.h>
|
|
#include <linux/sizes.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/irq.h>
|
|
#include <asm/mach/flash.h>
|
|
|
|
#include "pxa27x.h"
|
|
#include <mach/mainstone.h>
|
|
#include <mach/audio.h>
|
|
#include <linux/platform_data/video-pxafb.h>
|
|
#include <linux/platform_data/mmc-pxamci.h>
|
|
#include <linux/platform_data/irda-pxaficp.h>
|
|
#include <linux/platform_data/usb-ohci-pxa27x.h>
|
|
#include <linux/platform_data/keypad-pxa27x.h>
|
|
#include <mach/smemc.h>
|
|
|
|
#include "generic.h"
|
|
#include "devices.h"
|
|
|
|
static unsigned long mainstone_pin_config[] = {
|
|
/* Chip Select */
|
|
GPIO15_nCS_1,
|
|
|
|
/* LCD - 16bpp Active TFT */
|
|
GPIOxx_LCD_TFT_16BPP,
|
|
GPIO16_PWM0_OUT, /* Backlight */
|
|
|
|
/* MMC */
|
|
GPIO32_MMC_CLK,
|
|
GPIO112_MMC_CMD,
|
|
GPIO92_MMC_DAT_0,
|
|
GPIO109_MMC_DAT_1,
|
|
GPIO110_MMC_DAT_2,
|
|
GPIO111_MMC_DAT_3,
|
|
|
|
/* USB Host Port 1 */
|
|
GPIO88_USBH1_PWR,
|
|
GPIO89_USBH1_PEN,
|
|
|
|
/* PC Card */
|
|
GPIO48_nPOE,
|
|
GPIO49_nPWE,
|
|
GPIO50_nPIOR,
|
|
GPIO51_nPIOW,
|
|
GPIO85_nPCE_1,
|
|
GPIO54_nPCE_2,
|
|
GPIO79_PSKTSEL,
|
|
GPIO55_nPREG,
|
|
GPIO56_nPWAIT,
|
|
GPIO57_nIOIS16,
|
|
|
|
/* AC97 */
|
|
GPIO28_AC97_BITCLK,
|
|
GPIO29_AC97_SDATA_IN_0,
|
|
GPIO30_AC97_SDATA_OUT,
|
|
GPIO31_AC97_SYNC,
|
|
GPIO45_AC97_SYSCLK,
|
|
|
|
/* Keypad */
|
|
GPIO93_KP_DKIN_0,
|
|
GPIO94_KP_DKIN_1,
|
|
GPIO95_KP_DKIN_2,
|
|
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
|
|
GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
|
|
GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
|
|
GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
|
|
GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
|
|
GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH,
|
|
GPIO103_KP_MKOUT_0,
|
|
GPIO104_KP_MKOUT_1,
|
|
GPIO105_KP_MKOUT_2,
|
|
GPIO106_KP_MKOUT_3,
|
|
GPIO107_KP_MKOUT_4,
|
|
GPIO108_KP_MKOUT_5,
|
|
GPIO96_KP_MKOUT_6,
|
|
|
|
/* I2C */
|
|
GPIO117_I2C_SCL,
|
|
GPIO118_I2C_SDA,
|
|
|
|
/* GPIO */
|
|
GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
|
|
};
|
|
|
|
static struct resource smc91x_resources[] = {
|
|
[0] = {
|
|
.start = (MST_ETH_PHYS + 0x300),
|
|
.end = (MST_ETH_PHYS + 0xfffff),
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = MAINSTONE_IRQ(3),
|
|
.end = MAINSTONE_IRQ(3),
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
|
|
}
|
|
};
|
|
|
|
static struct smc91x_platdata mainstone_smc91x_info = {
|
|
.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
|
|
SMC91X_NOWAIT | SMC91X_USE_DMA,
|
|
.pxa_u16_align4 = true,
|
|
};
|
|
|
|
static struct platform_device smc91x_device = {
|
|
.name = "smc91x",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(smc91x_resources),
|
|
.resource = smc91x_resources,
|
|
.dev = {
|
|
.platform_data = &mainstone_smc91x_info,
|
|
},
|
|
};
|
|
|
|
static int mst_audio_startup(struct snd_pcm_substream *substream, void *priv)
|
|
{
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
MST_MSCWR2 &= ~MST_MSCWR2_AC97_SPKROFF;
|
|
return 0;
|
|
}
|
|
|
|
static void mst_audio_shutdown(struct snd_pcm_substream *substream, void *priv)
|
|
{
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
MST_MSCWR2 |= MST_MSCWR2_AC97_SPKROFF;
|
|
}
|
|
|
|
static long mst_audio_suspend_mask;
|
|
|
|
static void mst_audio_suspend(void *priv)
|
|
{
|
|
mst_audio_suspend_mask = MST_MSCWR2;
|
|
MST_MSCWR2 |= MST_MSCWR2_AC97_SPKROFF;
|
|
}
|
|
|
|
static void mst_audio_resume(void *priv)
|
|
{
|
|
MST_MSCWR2 &= mst_audio_suspend_mask | ~MST_MSCWR2_AC97_SPKROFF;
|
|
}
|
|
|
|
static pxa2xx_audio_ops_t mst_audio_ops = {
|
|
.startup = mst_audio_startup,
|
|
.shutdown = mst_audio_shutdown,
|
|
.suspend = mst_audio_suspend,
|
|
.resume = mst_audio_resume,
|
|
};
|
|
|
|
static struct resource flash_resources[] = {
|
|
[0] = {
|
|
.start = PXA_CS0_PHYS,
|
|
.end = PXA_CS0_PHYS + SZ_64M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = PXA_CS1_PHYS,
|
|
.end = PXA_CS1_PHYS + SZ_64M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct mtd_partition mainstoneflash0_partitions[] = {
|
|
{
|
|
.name = "Bootloader",
|
|
.size = 0x00040000,
|
|
.offset = 0,
|
|
.mask_flags = MTD_WRITEABLE /* force read-only */
|
|
},{
|
|
.name = "Kernel",
|
|
.size = 0x00400000,
|
|
.offset = 0x00040000,
|
|
},{
|
|
.name = "Filesystem",
|
|
.size = MTDPART_SIZ_FULL,
|
|
.offset = 0x00440000
|
|
}
|
|
};
|
|
|
|
static struct flash_platform_data mst_flash_data[2] = {
|
|
{
|
|
.map_name = "cfi_probe",
|
|
.parts = mainstoneflash0_partitions,
|
|
.nr_parts = ARRAY_SIZE(mainstoneflash0_partitions),
|
|
}, {
|
|
.map_name = "cfi_probe",
|
|
.parts = NULL,
|
|
.nr_parts = 0,
|
|
}
|
|
};
|
|
|
|
static struct platform_device mst_flash_device[2] = {
|
|
{
|
|
.name = "pxa2xx-flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &mst_flash_data[0],
|
|
},
|
|
.resource = &flash_resources[0],
|
|
.num_resources = 1,
|
|
},
|
|
{
|
|
.name = "pxa2xx-flash",
|
|
.id = 1,
|
|
.dev = {
|
|
.platform_data = &mst_flash_data[1],
|
|
},
|
|
.resource = &flash_resources[1],
|
|
.num_resources = 1,
|
|
},
|
|
};
|
|
|
|
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
|
|
static struct pwm_lookup mainstone_pwm_lookup[] = {
|
|
PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
|
|
PWM_POLARITY_NORMAL),
|
|
};
|
|
|
|
static struct platform_pwm_backlight_data mainstone_backlight_data = {
|
|
.max_brightness = 1023,
|
|
.dft_brightness = 1023,
|
|
};
|
|
|
|
static struct platform_device mainstone_backlight_device = {
|
|
.name = "pwm-backlight",
|
|
.dev = {
|
|
.parent = &pxa27x_device_pwm0.dev,
|
|
.platform_data = &mainstone_backlight_data,
|
|
},
|
|
};
|
|
|
|
static void __init mainstone_backlight_register(void)
|
|
{
|
|
int ret;
|
|
|
|
pwm_add_table(mainstone_pwm_lookup, ARRAY_SIZE(mainstone_pwm_lookup));
|
|
|
|
ret = platform_device_register(&mainstone_backlight_device);
|
|
if (ret) {
|
|
printk(KERN_ERR "mainstone: failed to register backlight device: %d\n", ret);
|
|
pwm_remove_table(mainstone_pwm_lookup,
|
|
ARRAY_SIZE(mainstone_pwm_lookup));
|
|
}
|
|
}
|
|
#else
|
|
#define mainstone_backlight_register() do { } while (0)
|
|
#endif
|
|
|
|
static struct pxafb_mode_info toshiba_ltm04c380k_mode = {
|
|
.pixclock = 50000,
|
|
.xres = 640,
|
|
.yres = 480,
|
|
.bpp = 16,
|
|
.hsync_len = 1,
|
|
.left_margin = 0x9f,
|
|
.right_margin = 1,
|
|
.vsync_len = 44,
|
|
.upper_margin = 0,
|
|
.lower_margin = 0,
|
|
.sync = FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
|
|
};
|
|
|
|
static struct pxafb_mode_info toshiba_ltm035a776c_mode = {
|
|
.pixclock = 110000,
|
|
.xres = 240,
|
|
.yres = 320,
|
|
.bpp = 16,
|
|
.hsync_len = 4,
|
|
.left_margin = 8,
|
|
.right_margin = 20,
|
|
.vsync_len = 3,
|
|
.upper_margin = 1,
|
|
.lower_margin = 10,
|
|
.sync = FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
|
|
};
|
|
|
|
static struct pxafb_mach_info mainstone_pxafb_info = {
|
|
.num_modes = 1,
|
|
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
|
|
};
|
|
|
|
static int mainstone_mci_init(struct device *dev, irq_handler_t mstone_detect_int, void *data)
|
|
{
|
|
int err;
|
|
|
|
/* make sure SD/Memory Stick multiplexer's signals
|
|
* are routed to MMC controller
|
|
*/
|
|
MST_MSCWR1 &= ~MST_MSCWR1_MS_SEL;
|
|
|
|
err = request_irq(MAINSTONE_MMC_IRQ, mstone_detect_int, 0,
|
|
"MMC card detect", data);
|
|
if (err)
|
|
printk(KERN_ERR "mainstone_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
|
|
|
|
return err;
|
|
}
|
|
|
|
static int mainstone_mci_setpower(struct device *dev, unsigned int vdd)
|
|
{
|
|
struct pxamci_platform_data* p_d = dev->platform_data;
|
|
|
|
if (( 1 << vdd) & p_d->ocr_mask) {
|
|
printk(KERN_DEBUG "%s: on\n", __func__);
|
|
MST_MSCWR1 |= MST_MSCWR1_MMC_ON;
|
|
MST_MSCWR1 &= ~MST_MSCWR1_MS_SEL;
|
|
} else {
|
|
printk(KERN_DEBUG "%s: off\n", __func__);
|
|
MST_MSCWR1 &= ~MST_MSCWR1_MMC_ON;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void mainstone_mci_exit(struct device *dev, void *data)
|
|
{
|
|
free_irq(MAINSTONE_MMC_IRQ, data);
|
|
}
|
|
|
|
static struct pxamci_platform_data mainstone_mci_platform_data = {
|
|
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
|
|
.init = mainstone_mci_init,
|
|
.setpower = mainstone_mci_setpower,
|
|
.exit = mainstone_mci_exit,
|
|
};
|
|
|
|
static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
|
|
{
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
if (mode & IR_SIRMODE) {
|
|
MST_MSCWR1 &= ~MST_MSCWR1_IRDA_FIR;
|
|
} else if (mode & IR_FIRMODE) {
|
|
MST_MSCWR1 |= MST_MSCWR1_IRDA_FIR;
|
|
}
|
|
pxa2xx_transceiver_mode(dev, mode);
|
|
if (mode & IR_OFF) {
|
|
MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_OFF;
|
|
} else {
|
|
MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_FULL;
|
|
}
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
static struct pxaficp_platform_data mainstone_ficp_platform_data = {
|
|
.gpio_pwdown = -1,
|
|
.transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
|
|
.transceiver_mode = mainstone_irda_transceiver_mode,
|
|
};
|
|
|
|
static struct gpio_keys_button gpio_keys_button[] = {
|
|
[0] = {
|
|
.desc = "wakeup",
|
|
.code = KEY_SUSPEND,
|
|
.type = EV_KEY,
|
|
.gpio = 1,
|
|
.wakeup = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_platform_data mainstone_gpio_keys = {
|
|
.buttons = gpio_keys_button,
|
|
.nbuttons = 1,
|
|
};
|
|
|
|
static struct platform_device mst_gpio_keys_device = {
|
|
.name = "gpio-keys",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &mainstone_gpio_keys,
|
|
},
|
|
};
|
|
|
|
static struct resource mst_cplds_resources[] = {
|
|
[0] = {
|
|
.start = MST_FPGA_PHYS + 0xc0,
|
|
.end = MST_FPGA_PHYS + 0xe0 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = PXA_GPIO_TO_IRQ(0),
|
|
.end = PXA_GPIO_TO_IRQ(0),
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
|
|
},
|
|
[2] = {
|
|
.start = MAINSTONE_IRQ(0),
|
|
.end = MAINSTONE_IRQ(15),
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device mst_cplds_device = {
|
|
.name = "pxa_cplds_irqs",
|
|
.id = -1,
|
|
.resource = &mst_cplds_resources[0],
|
|
.num_resources = 3,
|
|
};
|
|
|
|
static struct platform_device *platform_devices[] __initdata = {
|
|
&smc91x_device,
|
|
&mst_flash_device[0],
|
|
&mst_flash_device[1],
|
|
&mst_gpio_keys_device,
|
|
&mst_cplds_device,
|
|
};
|
|
|
|
static struct pxaohci_platform_data mainstone_ohci_platform_data = {
|
|
.port_mode = PMM_PERPORT_MODE,
|
|
.flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
|
|
};
|
|
|
|
#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
|
|
static const unsigned int mainstone_matrix_keys[] = {
|
|
KEY(0, 0, KEY_A), KEY(1, 0, KEY_B), KEY(2, 0, KEY_C),
|
|
KEY(3, 0, KEY_D), KEY(4, 0, KEY_E), KEY(5, 0, KEY_F),
|
|
KEY(0, 1, KEY_G), KEY(1, 1, KEY_H), KEY(2, 1, KEY_I),
|
|
KEY(3, 1, KEY_J), KEY(4, 1, KEY_K), KEY(5, 1, KEY_L),
|
|
KEY(0, 2, KEY_M), KEY(1, 2, KEY_N), KEY(2, 2, KEY_O),
|
|
KEY(3, 2, KEY_P), KEY(4, 2, KEY_Q), KEY(5, 2, KEY_R),
|
|
KEY(0, 3, KEY_S), KEY(1, 3, KEY_T), KEY(2, 3, KEY_U),
|
|
KEY(3, 3, KEY_V), KEY(4, 3, KEY_W), KEY(5, 3, KEY_X),
|
|
KEY(2, 4, KEY_Y), KEY(3, 4, KEY_Z),
|
|
|
|
KEY(0, 4, KEY_DOT), /* . */
|
|
KEY(1, 4, KEY_CLOSE), /* @ */
|
|
KEY(4, 4, KEY_SLASH),
|
|
KEY(5, 4, KEY_BACKSLASH),
|
|
KEY(0, 5, KEY_HOME),
|
|
KEY(1, 5, KEY_LEFTSHIFT),
|
|
KEY(2, 5, KEY_SPACE),
|
|
KEY(3, 5, KEY_SPACE),
|
|
KEY(4, 5, KEY_ENTER),
|
|
KEY(5, 5, KEY_BACKSPACE),
|
|
|
|
KEY(0, 6, KEY_UP),
|
|
KEY(1, 6, KEY_DOWN),
|
|
KEY(2, 6, KEY_LEFT),
|
|
KEY(3, 6, KEY_RIGHT),
|
|
KEY(4, 6, KEY_SELECT),
|
|
};
|
|
|
|
static struct matrix_keymap_data mainstone_matrix_keymap_data = {
|
|
.keymap = mainstone_matrix_keys,
|
|
.keymap_size = ARRAY_SIZE(mainstone_matrix_keys),
|
|
};
|
|
|
|
struct pxa27x_keypad_platform_data mainstone_keypad_info = {
|
|
.matrix_key_rows = 6,
|
|
.matrix_key_cols = 7,
|
|
.matrix_keymap_data = &mainstone_matrix_keymap_data,
|
|
|
|
.enable_rotary0 = 1,
|
|
.rotary0_up_key = KEY_UP,
|
|
.rotary0_down_key = KEY_DOWN,
|
|
|
|
.debounce_interval = 30,
|
|
};
|
|
|
|
static void __init mainstone_init_keypad(void)
|
|
{
|
|
pxa_set_keypad_info(&mainstone_keypad_info);
|
|
}
|
|
#else
|
|
static inline void mainstone_init_keypad(void) {}
|
|
#endif
|
|
|
|
static int mst_pcmcia0_irqs[11] = {
|
|
[0 ... 10] = -1,
|
|
[5] = MAINSTONE_S0_CD_IRQ,
|
|
[8] = MAINSTONE_S0_STSCHG_IRQ,
|
|
[10] = MAINSTONE_S0_IRQ,
|
|
};
|
|
|
|
static int mst_pcmcia1_irqs[11] = {
|
|
[0 ... 10] = -1,
|
|
[5] = MAINSTONE_S1_CD_IRQ,
|
|
[8] = MAINSTONE_S1_STSCHG_IRQ,
|
|
[10] = MAINSTONE_S1_IRQ,
|
|
};
|
|
|
|
static struct gpiod_lookup_table mainstone_pcmcia_gpio_table = {
|
|
.dev_id = "pxa2xx-pcmcia",
|
|
.table = {
|
|
GPIO_LOOKUP("mst-pcmcia0", 0, "a0vpp", GPIO_ACTIVE_HIGH),
|
|
GPIO_LOOKUP("mst-pcmcia0", 1, "a1vpp", GPIO_ACTIVE_HIGH),
|
|
GPIO_LOOKUP("mst-pcmcia0", 2, "a0vcc", GPIO_ACTIVE_HIGH),
|
|
GPIO_LOOKUP("mst-pcmcia0", 3, "a1vcc", GPIO_ACTIVE_HIGH),
|
|
GPIO_LOOKUP("mst-pcmcia0", 4, "areset", GPIO_ACTIVE_HIGH),
|
|
GPIO_LOOKUP("mst-pcmcia0", 5, "adetect", GPIO_ACTIVE_LOW),
|
|
GPIO_LOOKUP("mst-pcmcia0", 6, "avs1", GPIO_ACTIVE_LOW),
|
|
GPIO_LOOKUP("mst-pcmcia0", 7, "avs2", GPIO_ACTIVE_LOW),
|
|
GPIO_LOOKUP("mst-pcmcia0", 8, "abvd1", GPIO_ACTIVE_HIGH),
|
|
GPIO_LOOKUP("mst-pcmcia0", 9, "abvd2", GPIO_ACTIVE_HIGH),
|
|
GPIO_LOOKUP("mst-pcmcia0", 10, "aready", GPIO_ACTIVE_HIGH),
|
|
GPIO_LOOKUP("mst-pcmcia1", 0, "b0vpp", GPIO_ACTIVE_HIGH),
|
|
GPIO_LOOKUP("mst-pcmcia1", 1, "b1vpp", GPIO_ACTIVE_HIGH),
|
|
GPIO_LOOKUP("mst-pcmcia1", 2, "b0vcc", GPIO_ACTIVE_HIGH),
|
|
GPIO_LOOKUP("mst-pcmcia1", 3, "b1vcc", GPIO_ACTIVE_HIGH),
|
|
GPIO_LOOKUP("mst-pcmcia1", 4, "breset", GPIO_ACTIVE_HIGH),
|
|
GPIO_LOOKUP("mst-pcmcia1", 5, "bdetect", GPIO_ACTIVE_LOW),
|
|
GPIO_LOOKUP("mst-pcmcia1", 6, "bvs1", GPIO_ACTIVE_LOW),
|
|
GPIO_LOOKUP("mst-pcmcia1", 7, "bvs2", GPIO_ACTIVE_LOW),
|
|
GPIO_LOOKUP("mst-pcmcia1", 8, "bbvd1", GPIO_ACTIVE_HIGH),
|
|
GPIO_LOOKUP("mst-pcmcia1", 9, "bbvd2", GPIO_ACTIVE_HIGH),
|
|
GPIO_LOOKUP("mst-pcmcia1", 10, "bready", GPIO_ACTIVE_HIGH),
|
|
{ },
|
|
},
|
|
};
|
|
|
|
static void __init mainstone_init(void)
|
|
{
|
|
int SW7 = 0; /* FIXME: get from SCR (Mst doc section 3.2.1.1) */
|
|
|
|
pxa2xx_mfp_config(ARRAY_AND_SIZE(mainstone_pin_config));
|
|
|
|
/* Register board control register(s) as GPIOs */
|
|
gpio_reg_init(NULL, (void __iomem *)&MST_PCMCIA0, -1, 11,
|
|
"mst-pcmcia0", MST_PCMCIA_INPUTS, 0, NULL,
|
|
NULL, mst_pcmcia0_irqs);
|
|
gpio_reg_init(NULL, (void __iomem *)&MST_PCMCIA1, -1, 11,
|
|
"mst-pcmcia1", MST_PCMCIA_INPUTS, 0, NULL,
|
|
NULL, mst_pcmcia1_irqs);
|
|
gpiod_add_lookup_table(&mainstone_pcmcia_gpio_table);
|
|
|
|
pxa_set_ffuart_info(NULL);
|
|
pxa_set_btuart_info(NULL);
|
|
pxa_set_stuart_info(NULL);
|
|
|
|
mst_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
|
|
mst_flash_data[1].width = 4;
|
|
|
|
/* Compensate for SW7 which swaps the flash banks */
|
|
mst_flash_data[SW7].name = "processor-flash";
|
|
mst_flash_data[SW7 ^ 1].name = "mainboard-flash";
|
|
|
|
printk(KERN_NOTICE "Mainstone configured to boot from %s\n",
|
|
mst_flash_data[0].name);
|
|
|
|
/* system bus arbiter setting
|
|
* - Core_Park
|
|
* - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
|
|
*/
|
|
ARB_CNTRL = ARB_CORE_PARK | 0x234;
|
|
|
|
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
|
|
|
|
/* reading Mainstone's "Virtual Configuration Register"
|
|
might be handy to select LCD type here */
|
|
if (0)
|
|
mainstone_pxafb_info.modes = &toshiba_ltm04c380k_mode;
|
|
else
|
|
mainstone_pxafb_info.modes = &toshiba_ltm035a776c_mode;
|
|
|
|
pxa_set_fb_info(NULL, &mainstone_pxafb_info);
|
|
mainstone_backlight_register();
|
|
|
|
pxa_set_mci_info(&mainstone_mci_platform_data);
|
|
pxa_set_ficp_info(&mainstone_ficp_platform_data);
|
|
pxa_set_ohci_info(&mainstone_ohci_platform_data);
|
|
pxa_set_i2c_info(NULL);
|
|
pxa_set_ac97_info(&mst_audio_ops);
|
|
|
|
mainstone_init_keypad();
|
|
}
|
|
|
|
|
|
static struct map_desc mainstone_io_desc[] __initdata = {
|
|
{ /* CPLD */
|
|
.virtual = MST_FPGA_VIRT,
|
|
.pfn = __phys_to_pfn(MST_FPGA_PHYS),
|
|
.length = 0x00100000,
|
|
.type = MT_DEVICE
|
|
}
|
|
};
|
|
|
|
static void __init mainstone_map_io(void)
|
|
{
|
|
pxa27x_map_io();
|
|
iotable_init(mainstone_io_desc, ARRAY_SIZE(mainstone_io_desc));
|
|
|
|
/* for use I SRAM as framebuffer. */
|
|
PSLR |= 0xF04;
|
|
PCFR = 0x66;
|
|
}
|
|
|
|
/*
|
|
* Driver for the 8 discrete LEDs available for general use:
|
|
* Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
|
|
* so be sure to not monkey with them here.
|
|
*/
|
|
|
|
#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
|
|
struct mainstone_led {
|
|
struct led_classdev cdev;
|
|
u8 mask;
|
|
};
|
|
|
|
/*
|
|
* The triggers lines up below will only be used if the
|
|
* LED triggers are compiled in.
|
|
*/
|
|
static const struct {
|
|
const char *name;
|
|
const char *trigger;
|
|
} mainstone_leds[] = {
|
|
{ "mainstone:D28", "default-on", },
|
|
{ "mainstone:D27", "cpu0", },
|
|
{ "mainstone:D26", "heartbeat" },
|
|
{ "mainstone:D25", },
|
|
{ "mainstone:D24", },
|
|
{ "mainstone:D23", },
|
|
{ "mainstone:D22", },
|
|
{ "mainstone:D21", },
|
|
};
|
|
|
|
static void mainstone_led_set(struct led_classdev *cdev,
|
|
enum led_brightness b)
|
|
{
|
|
struct mainstone_led *led = container_of(cdev,
|
|
struct mainstone_led, cdev);
|
|
u32 reg = MST_LEDCTRL;
|
|
|
|
if (b != LED_OFF)
|
|
reg |= led->mask;
|
|
else
|
|
reg &= ~led->mask;
|
|
|
|
MST_LEDCTRL = reg;
|
|
}
|
|
|
|
static enum led_brightness mainstone_led_get(struct led_classdev *cdev)
|
|
{
|
|
struct mainstone_led *led = container_of(cdev,
|
|
struct mainstone_led, cdev);
|
|
u32 reg = MST_LEDCTRL;
|
|
|
|
return (reg & led->mask) ? LED_FULL : LED_OFF;
|
|
}
|
|
|
|
static int __init mainstone_leds_init(void)
|
|
{
|
|
int i;
|
|
|
|
if (!machine_is_mainstone())
|
|
return -ENODEV;
|
|
|
|
/* All ON */
|
|
MST_LEDCTRL |= 0xff;
|
|
for (i = 0; i < ARRAY_SIZE(mainstone_leds); i++) {
|
|
struct mainstone_led *led;
|
|
|
|
led = kzalloc(sizeof(*led), GFP_KERNEL);
|
|
if (!led)
|
|
break;
|
|
|
|
led->cdev.name = mainstone_leds[i].name;
|
|
led->cdev.brightness_set = mainstone_led_set;
|
|
led->cdev.brightness_get = mainstone_led_get;
|
|
led->cdev.default_trigger = mainstone_leds[i].trigger;
|
|
led->mask = BIT(i);
|
|
|
|
if (led_classdev_register(NULL, &led->cdev) < 0) {
|
|
kfree(led);
|
|
break;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Since we may have triggers on any subsystem, defer registration
|
|
* until after subsystem_init.
|
|
*/
|
|
fs_initcall(mainstone_leds_init);
|
|
#endif
|
|
|
|
MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
|
|
/* Maintainer: MontaVista Software Inc. */
|
|
.atag_offset = 0x100, /* BLOB boot parameter setting */
|
|
.map_io = mainstone_map_io,
|
|
.nr_irqs = MAINSTONE_NR_IRQS,
|
|
.init_irq = pxa27x_init_irq,
|
|
.handle_irq = pxa27x_handle_irq,
|
|
.init_time = pxa_timer_init,
|
|
.init_machine = mainstone_init,
|
|
.restart = pxa_restart,
|
|
MACHINE_END
|