322 lines
8.1 KiB
C
322 lines
8.1 KiB
C
/*
|
|
* Memory controller driver for ARM PrimeCell PL172
|
|
* PrimeCell MultiPort Memory Controller (PL172)
|
|
*
|
|
* Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
|
|
*
|
|
* Based on:
|
|
* TI AEMIF driver, Copyright (C) 2010 - 2013 Texas Instruments Inc.
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/amba/bus.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/time.h>
|
|
|
|
#define MPMC_STATIC_CFG(n) (0x200 + 0x20 * n)
|
|
#define MPMC_STATIC_CFG_MW_8BIT 0x0
|
|
#define MPMC_STATIC_CFG_MW_16BIT 0x1
|
|
#define MPMC_STATIC_CFG_MW_32BIT 0x2
|
|
#define MPMC_STATIC_CFG_PM BIT(3)
|
|
#define MPMC_STATIC_CFG_PC BIT(6)
|
|
#define MPMC_STATIC_CFG_PB BIT(7)
|
|
#define MPMC_STATIC_CFG_EW BIT(8)
|
|
#define MPMC_STATIC_CFG_B BIT(19)
|
|
#define MPMC_STATIC_CFG_P BIT(20)
|
|
#define MPMC_STATIC_WAIT_WEN(n) (0x204 + 0x20 * n)
|
|
#define MPMC_STATIC_WAIT_WEN_MAX 0x0f
|
|
#define MPMC_STATIC_WAIT_OEN(n) (0x208 + 0x20 * n)
|
|
#define MPMC_STATIC_WAIT_OEN_MAX 0x0f
|
|
#define MPMC_STATIC_WAIT_RD(n) (0x20c + 0x20 * n)
|
|
#define MPMC_STATIC_WAIT_RD_MAX 0x1f
|
|
#define MPMC_STATIC_WAIT_PAGE(n) (0x210 + 0x20 * n)
|
|
#define MPMC_STATIC_WAIT_PAGE_MAX 0x1f
|
|
#define MPMC_STATIC_WAIT_WR(n) (0x214 + 0x20 * n)
|
|
#define MPMC_STATIC_WAIT_WR_MAX 0x1f
|
|
#define MPMC_STATIC_WAIT_TURN(n) (0x218 + 0x20 * n)
|
|
#define MPMC_STATIC_WAIT_TURN_MAX 0x0f
|
|
|
|
/* Maximum number of static chip selects */
|
|
#define PL172_MAX_CS 4
|
|
|
|
struct pl172_data {
|
|
void __iomem *base;
|
|
unsigned long rate;
|
|
struct clk *clk;
|
|
};
|
|
|
|
static int pl172_timing_prop(struct amba_device *adev,
|
|
const struct device_node *np, const char *name,
|
|
u32 reg_offset, u32 max, int start)
|
|
{
|
|
struct pl172_data *pl172 = amba_get_drvdata(adev);
|
|
int cycles;
|
|
u32 val;
|
|
|
|
if (!of_property_read_u32(np, name, &val)) {
|
|
cycles = DIV_ROUND_UP(val * pl172->rate, NSEC_PER_MSEC) - start;
|
|
if (cycles < 0) {
|
|
cycles = 0;
|
|
} else if (cycles > max) {
|
|
dev_err(&adev->dev, "%s timing too tight\n", name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
writel(cycles, pl172->base + reg_offset);
|
|
}
|
|
|
|
dev_dbg(&adev->dev, "%s: %u cycle(s)\n", name, start +
|
|
readl(pl172->base + reg_offset));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pl172_setup_static(struct amba_device *adev,
|
|
struct device_node *np, u32 cs)
|
|
{
|
|
struct pl172_data *pl172 = amba_get_drvdata(adev);
|
|
u32 cfg;
|
|
int ret;
|
|
|
|
/* MPMC static memory configuration */
|
|
if (!of_property_read_u32(np, "mpmc,memory-width", &cfg)) {
|
|
if (cfg == 8) {
|
|
cfg = MPMC_STATIC_CFG_MW_8BIT;
|
|
} else if (cfg == 16) {
|
|
cfg = MPMC_STATIC_CFG_MW_16BIT;
|
|
} else if (cfg == 32) {
|
|
cfg = MPMC_STATIC_CFG_MW_32BIT;
|
|
} else {
|
|
dev_err(&adev->dev, "invalid memory width cs%u\n", cs);
|
|
return -EINVAL;
|
|
}
|
|
} else {
|
|
dev_err(&adev->dev, "memory-width property required\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (of_property_read_bool(np, "mpmc,async-page-mode"))
|
|
cfg |= MPMC_STATIC_CFG_PM;
|
|
|
|
if (of_property_read_bool(np, "mpmc,cs-active-high"))
|
|
cfg |= MPMC_STATIC_CFG_PC;
|
|
|
|
if (of_property_read_bool(np, "mpmc,byte-lane-low"))
|
|
cfg |= MPMC_STATIC_CFG_PB;
|
|
|
|
if (of_property_read_bool(np, "mpmc,extended-wait"))
|
|
cfg |= MPMC_STATIC_CFG_EW;
|
|
|
|
if (amba_part(adev) == 0x172 &&
|
|
of_property_read_bool(np, "mpmc,buffer-enable"))
|
|
cfg |= MPMC_STATIC_CFG_B;
|
|
|
|
if (of_property_read_bool(np, "mpmc,write-protect"))
|
|
cfg |= MPMC_STATIC_CFG_P;
|
|
|
|
writel(cfg, pl172->base + MPMC_STATIC_CFG(cs));
|
|
dev_dbg(&adev->dev, "mpmc static config cs%u: 0x%08x\n", cs, cfg);
|
|
|
|
/* MPMC static memory timing */
|
|
ret = pl172_timing_prop(adev, np, "mpmc,write-enable-delay",
|
|
MPMC_STATIC_WAIT_WEN(cs),
|
|
MPMC_STATIC_WAIT_WEN_MAX, 1);
|
|
if (ret)
|
|
goto fail;
|
|
|
|
ret = pl172_timing_prop(adev, np, "mpmc,output-enable-delay",
|
|
MPMC_STATIC_WAIT_OEN(cs),
|
|
MPMC_STATIC_WAIT_OEN_MAX, 0);
|
|
if (ret)
|
|
goto fail;
|
|
|
|
ret = pl172_timing_prop(adev, np, "mpmc,read-access-delay",
|
|
MPMC_STATIC_WAIT_RD(cs),
|
|
MPMC_STATIC_WAIT_RD_MAX, 1);
|
|
if (ret)
|
|
goto fail;
|
|
|
|
ret = pl172_timing_prop(adev, np, "mpmc,page-mode-read-delay",
|
|
MPMC_STATIC_WAIT_PAGE(cs),
|
|
MPMC_STATIC_WAIT_PAGE_MAX, 1);
|
|
if (ret)
|
|
goto fail;
|
|
|
|
ret = pl172_timing_prop(adev, np, "mpmc,write-access-delay",
|
|
MPMC_STATIC_WAIT_WR(cs),
|
|
MPMC_STATIC_WAIT_WR_MAX, 2);
|
|
if (ret)
|
|
goto fail;
|
|
|
|
ret = pl172_timing_prop(adev, np, "mpmc,turn-round-delay",
|
|
MPMC_STATIC_WAIT_TURN(cs),
|
|
MPMC_STATIC_WAIT_TURN_MAX, 1);
|
|
if (ret)
|
|
goto fail;
|
|
|
|
return 0;
|
|
fail:
|
|
dev_err(&adev->dev, "failed to configure cs%u\n", cs);
|
|
return ret;
|
|
}
|
|
|
|
static int pl172_parse_cs_config(struct amba_device *adev,
|
|
struct device_node *np)
|
|
{
|
|
u32 cs;
|
|
|
|
if (!of_property_read_u32(np, "mpmc,cs", &cs)) {
|
|
if (cs >= PL172_MAX_CS) {
|
|
dev_err(&adev->dev, "cs%u invalid\n", cs);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return pl172_setup_static(adev, np, cs);
|
|
}
|
|
|
|
dev_err(&adev->dev, "cs property required\n");
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const char * const pl172_revisions[] = {"r1", "r2", "r2p3", "r2p4"};
|
|
static const char * const pl175_revisions[] = {"r1"};
|
|
static const char * const pl176_revisions[] = {"r0"};
|
|
|
|
static int pl172_probe(struct amba_device *adev, const struct amba_id *id)
|
|
{
|
|
struct device_node *child_np, *np = adev->dev.of_node;
|
|
struct device *dev = &adev->dev;
|
|
static const char *rev = "?";
|
|
struct pl172_data *pl172;
|
|
int ret;
|
|
|
|
if (amba_part(adev) == 0x172) {
|
|
if (amba_rev(adev) < ARRAY_SIZE(pl172_revisions))
|
|
rev = pl172_revisions[amba_rev(adev)];
|
|
} else if (amba_part(adev) == 0x175) {
|
|
if (amba_rev(adev) < ARRAY_SIZE(pl175_revisions))
|
|
rev = pl175_revisions[amba_rev(adev)];
|
|
} else if (amba_part(adev) == 0x176) {
|
|
if (amba_rev(adev) < ARRAY_SIZE(pl176_revisions))
|
|
rev = pl176_revisions[amba_rev(adev)];
|
|
}
|
|
|
|
dev_info(dev, "ARM PL%x revision %s\n", amba_part(adev), rev);
|
|
|
|
pl172 = devm_kzalloc(dev, sizeof(*pl172), GFP_KERNEL);
|
|
if (!pl172)
|
|
return -ENOMEM;
|
|
|
|
pl172->clk = devm_clk_get(dev, "mpmcclk");
|
|
if (IS_ERR(pl172->clk)) {
|
|
dev_err(dev, "no mpmcclk provided clock\n");
|
|
return PTR_ERR(pl172->clk);
|
|
}
|
|
|
|
ret = clk_prepare_enable(pl172->clk);
|
|
if (ret) {
|
|
dev_err(dev, "unable to mpmcclk enable clock\n");
|
|
return ret;
|
|
}
|
|
|
|
pl172->rate = clk_get_rate(pl172->clk) / MSEC_PER_SEC;
|
|
if (!pl172->rate) {
|
|
dev_err(dev, "unable to get mpmcclk clock rate\n");
|
|
ret = -EINVAL;
|
|
goto err_clk_enable;
|
|
}
|
|
|
|
ret = amba_request_regions(adev, NULL);
|
|
if (ret) {
|
|
dev_err(dev, "unable to request AMBA regions\n");
|
|
goto err_clk_enable;
|
|
}
|
|
|
|
pl172->base = devm_ioremap(dev, adev->res.start,
|
|
resource_size(&adev->res));
|
|
if (!pl172->base) {
|
|
dev_err(dev, "ioremap failed\n");
|
|
ret = -ENOMEM;
|
|
goto err_no_ioremap;
|
|
}
|
|
|
|
amba_set_drvdata(adev, pl172);
|
|
|
|
/*
|
|
* Loop through each child node, which represent a chip select, and
|
|
* configure parameters and timing. If successful; populate devices
|
|
* under that node.
|
|
*/
|
|
for_each_available_child_of_node(np, child_np) {
|
|
ret = pl172_parse_cs_config(adev, child_np);
|
|
if (ret)
|
|
continue;
|
|
|
|
of_platform_populate(child_np, NULL, NULL, dev);
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_no_ioremap:
|
|
amba_release_regions(adev);
|
|
err_clk_enable:
|
|
clk_disable_unprepare(pl172->clk);
|
|
return ret;
|
|
}
|
|
|
|
static int pl172_remove(struct amba_device *adev)
|
|
{
|
|
struct pl172_data *pl172 = amba_get_drvdata(adev);
|
|
|
|
clk_disable_unprepare(pl172->clk);
|
|
amba_release_regions(adev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct amba_id pl172_ids[] = {
|
|
/* PrimeCell MPMC PL172, EMC found on NXP LPC18xx and LPC43xx */
|
|
{
|
|
.id = 0x07041172,
|
|
.mask = 0x3f0fffff,
|
|
},
|
|
/* PrimeCell MPMC PL175, EMC found on NXP LPC32xx */
|
|
{
|
|
.id = 0x07041175,
|
|
.mask = 0x3f0fffff,
|
|
},
|
|
/* PrimeCell MPMC PL176 */
|
|
{
|
|
.id = 0x89041176,
|
|
.mask = 0xff0fffff,
|
|
},
|
|
{ 0, 0 },
|
|
};
|
|
MODULE_DEVICE_TABLE(amba, pl172_ids);
|
|
|
|
static struct amba_driver pl172_driver = {
|
|
.drv = {
|
|
.name = "memory-pl172",
|
|
},
|
|
.probe = pl172_probe,
|
|
.remove = pl172_remove,
|
|
.id_table = pl172_ids,
|
|
};
|
|
module_amba_driver(pl172_driver);
|
|
|
|
MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>");
|
|
MODULE_DESCRIPTION("PL172 Memory Controller Driver");
|
|
MODULE_LICENSE("GPL v2");
|