555 lines
13 KiB
C
555 lines
13 KiB
C
/*
|
|
* core.c - ChipIdea USB IP core family device controller
|
|
*
|
|
* Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
|
|
*
|
|
* Author: David Lopo
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
/*
|
|
* Description: ChipIdea USB IP core family device controller
|
|
*
|
|
* This driver is composed of several blocks:
|
|
* - HW: hardware interface
|
|
* - DBG: debug facilities (optional)
|
|
* - UTIL: utilities
|
|
* - ISR: interrupts handling
|
|
* - ENDPT: endpoint operations (Gadget API)
|
|
* - GADGET: gadget operations (Gadget API)
|
|
* - BUS: bus glue code, bus abstraction layer
|
|
*
|
|
* Compile Options
|
|
* - CONFIG_USB_GADGET_DEBUG_FILES: enable debug facilities
|
|
* - STALL_IN: non-empty bulk-in pipes cannot be halted
|
|
* if defined mass storage compliance succeeds but with warnings
|
|
* => case 4: Hi > Dn
|
|
* => case 5: Hi > Di
|
|
* => case 8: Hi <> Do
|
|
* if undefined usbtest 13 fails
|
|
* - TRACE: enable function tracing (depends on DEBUG)
|
|
*
|
|
* Main Features
|
|
* - Chapter 9 & Mass Storage Compliance with Gadget File Storage
|
|
* - Chapter 9 Compliance with Gadget Zero (STALL_IN undefined)
|
|
* - Normal & LPM support
|
|
*
|
|
* USBTEST Report
|
|
* - OK: 0-12, 13 (STALL_IN defined) & 14
|
|
* - Not Supported: 15 & 16 (ISO)
|
|
*
|
|
* TODO List
|
|
* - OTG
|
|
* - Interrupt Traffic
|
|
* - GET_STATUS(device) - always reports 0
|
|
* - Gadget API (majority of optional features)
|
|
* - Suspend & Remote Wakeup
|
|
*/
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/module.h>
|
|
#include <linux/idr.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/usb/ch9.h>
|
|
#include <linux/usb/gadget.h>
|
|
#include <linux/usb/otg.h>
|
|
#include <linux/usb/chipidea.h>
|
|
#include <linux/usb/of.h>
|
|
#include <linux/phy.h>
|
|
|
|
#include "ci.h"
|
|
#include "udc.h"
|
|
#include "bits.h"
|
|
#include "host.h"
|
|
#include "debug.h"
|
|
|
|
/* Controller register map */
|
|
static uintptr_t ci_regs_nolpm[] = {
|
|
[CAP_CAPLENGTH] = 0x000UL,
|
|
[CAP_HCCPARAMS] = 0x008UL,
|
|
[CAP_DCCPARAMS] = 0x024UL,
|
|
[CAP_TESTMODE] = 0x038UL,
|
|
[OP_USBCMD] = 0x000UL,
|
|
[OP_USBSTS] = 0x004UL,
|
|
[OP_USBINTR] = 0x008UL,
|
|
[OP_DEVICEADDR] = 0x014UL,
|
|
[OP_ENDPTLISTADDR] = 0x018UL,
|
|
[OP_PORTSC] = 0x044UL,
|
|
[OP_DEVLC] = 0x084UL,
|
|
[OP_OTGSC] = 0x064UL,
|
|
[OP_USBMODE] = 0x068UL,
|
|
[OP_ENDPTSETUPSTAT] = 0x06CUL,
|
|
[OP_ENDPTPRIME] = 0x070UL,
|
|
[OP_ENDPTFLUSH] = 0x074UL,
|
|
[OP_ENDPTSTAT] = 0x078UL,
|
|
[OP_ENDPTCOMPLETE] = 0x07CUL,
|
|
[OP_ENDPTCTRL] = 0x080UL,
|
|
};
|
|
|
|
static uintptr_t ci_regs_lpm[] = {
|
|
[CAP_CAPLENGTH] = 0x000UL,
|
|
[CAP_HCCPARAMS] = 0x008UL,
|
|
[CAP_DCCPARAMS] = 0x024UL,
|
|
[CAP_TESTMODE] = 0x0FCUL,
|
|
[OP_USBCMD] = 0x000UL,
|
|
[OP_USBSTS] = 0x004UL,
|
|
[OP_USBINTR] = 0x008UL,
|
|
[OP_DEVICEADDR] = 0x014UL,
|
|
[OP_ENDPTLISTADDR] = 0x018UL,
|
|
[OP_PORTSC] = 0x044UL,
|
|
[OP_DEVLC] = 0x084UL,
|
|
[OP_OTGSC] = 0x0C4UL,
|
|
[OP_USBMODE] = 0x0C8UL,
|
|
[OP_ENDPTSETUPSTAT] = 0x0D8UL,
|
|
[OP_ENDPTPRIME] = 0x0DCUL,
|
|
[OP_ENDPTFLUSH] = 0x0E0UL,
|
|
[OP_ENDPTSTAT] = 0x0E4UL,
|
|
[OP_ENDPTCOMPLETE] = 0x0E8UL,
|
|
[OP_ENDPTCTRL] = 0x0ECUL,
|
|
};
|
|
|
|
static int hw_alloc_regmap(struct ci13xxx *ci, bool is_lpm)
|
|
{
|
|
int i;
|
|
|
|
kfree(ci->hw_bank.regmap);
|
|
|
|
ci->hw_bank.regmap = kzalloc((OP_LAST + 1) * sizeof(void *),
|
|
GFP_KERNEL);
|
|
if (!ci->hw_bank.regmap)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < OP_ENDPTCTRL; i++)
|
|
ci->hw_bank.regmap[i] =
|
|
(i <= CAP_LAST ? ci->hw_bank.cap : ci->hw_bank.op) +
|
|
(is_lpm ? ci_regs_lpm[i] : ci_regs_nolpm[i]);
|
|
|
|
for (; i <= OP_LAST; i++)
|
|
ci->hw_bank.regmap[i] = ci->hw_bank.op +
|
|
4 * (i - OP_ENDPTCTRL) +
|
|
(is_lpm
|
|
? ci_regs_lpm[OP_ENDPTCTRL]
|
|
: ci_regs_nolpm[OP_ENDPTCTRL]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* hw_port_test_set: writes port test mode (execute without interruption)
|
|
* @mode: new value
|
|
*
|
|
* This function returns an error code
|
|
*/
|
|
int hw_port_test_set(struct ci13xxx *ci, u8 mode)
|
|
{
|
|
const u8 TEST_MODE_MAX = 7;
|
|
|
|
if (mode > TEST_MODE_MAX)
|
|
return -EINVAL;
|
|
|
|
hw_write(ci, OP_PORTSC, PORTSC_PTC, mode << __ffs(PORTSC_PTC));
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* hw_port_test_get: reads port test mode value
|
|
*
|
|
* This function returns port test mode value
|
|
*/
|
|
u8 hw_port_test_get(struct ci13xxx *ci)
|
|
{
|
|
return hw_read(ci, OP_PORTSC, PORTSC_PTC) >> __ffs(PORTSC_PTC);
|
|
}
|
|
|
|
static int hw_device_init(struct ci13xxx *ci, void __iomem *base)
|
|
{
|
|
u32 reg;
|
|
|
|
/* bank is a module variable */
|
|
ci->hw_bank.abs = base;
|
|
|
|
ci->hw_bank.cap = ci->hw_bank.abs;
|
|
ci->hw_bank.cap += ci->platdata->capoffset;
|
|
ci->hw_bank.op = ci->hw_bank.cap + (ioread32(ci->hw_bank.cap) & 0xff);
|
|
|
|
hw_alloc_regmap(ci, false);
|
|
reg = hw_read(ci, CAP_HCCPARAMS, HCCPARAMS_LEN) >>
|
|
__ffs(HCCPARAMS_LEN);
|
|
ci->hw_bank.lpm = reg;
|
|
hw_alloc_regmap(ci, !!reg);
|
|
ci->hw_bank.size = ci->hw_bank.op - ci->hw_bank.abs;
|
|
ci->hw_bank.size += OP_LAST;
|
|
ci->hw_bank.size /= sizeof(u32);
|
|
|
|
reg = hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DEN) >>
|
|
__ffs(DCCPARAMS_DEN);
|
|
ci->hw_ep_max = reg * 2; /* cache hw ENDPT_MAX */
|
|
|
|
if (ci->hw_ep_max > ENDPT_MAX)
|
|
return -ENODEV;
|
|
|
|
dev_dbg(ci->dev, "ChipIdea HDRC found, lpm: %d; cap: %p op: %p\n",
|
|
ci->hw_bank.lpm, ci->hw_bank.cap, ci->hw_bank.op);
|
|
|
|
/* setup lock mode ? */
|
|
|
|
/* ENDPTSETUPSTAT is '0' by default */
|
|
|
|
/* HCSPARAMS.bf.ppc SHOULD BE zero for device */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void hw_phymode_configure(struct ci13xxx *ci)
|
|
{
|
|
u32 portsc, lpm, sts;
|
|
|
|
switch (ci->platdata->phy_mode) {
|
|
case USBPHY_INTERFACE_MODE_UTMI:
|
|
portsc = PORTSC_PTS(PTS_UTMI);
|
|
lpm = DEVLC_PTS(PTS_UTMI);
|
|
break;
|
|
case USBPHY_INTERFACE_MODE_UTMIW:
|
|
portsc = PORTSC_PTS(PTS_UTMI) | PORTSC_PTW;
|
|
lpm = DEVLC_PTS(PTS_UTMI) | DEVLC_PTW;
|
|
break;
|
|
case USBPHY_INTERFACE_MODE_ULPI:
|
|
portsc = PORTSC_PTS(PTS_ULPI);
|
|
lpm = DEVLC_PTS(PTS_ULPI);
|
|
break;
|
|
case USBPHY_INTERFACE_MODE_SERIAL:
|
|
portsc = PORTSC_PTS(PTS_SERIAL);
|
|
lpm = DEVLC_PTS(PTS_SERIAL);
|
|
sts = 1;
|
|
break;
|
|
case USBPHY_INTERFACE_MODE_HSIC:
|
|
portsc = PORTSC_PTS(PTS_HSIC);
|
|
lpm = DEVLC_PTS(PTS_HSIC);
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
|
|
if (ci->hw_bank.lpm) {
|
|
hw_write(ci, OP_DEVLC, DEVLC_PTS(7) | DEVLC_PTW, lpm);
|
|
hw_write(ci, OP_DEVLC, DEVLC_STS, sts);
|
|
} else {
|
|
hw_write(ci, OP_PORTSC, PORTSC_PTS(7) | PORTSC_PTW, portsc);
|
|
hw_write(ci, OP_PORTSC, PORTSC_STS, sts);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* hw_device_reset: resets chip (execute without interruption)
|
|
* @ci: the controller
|
|
*
|
|
* This function returns an error code
|
|
*/
|
|
int hw_device_reset(struct ci13xxx *ci, u32 mode)
|
|
{
|
|
/* should flush & stop before reset */
|
|
hw_write(ci, OP_ENDPTFLUSH, ~0, ~0);
|
|
hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
|
|
|
|
hw_write(ci, OP_USBCMD, USBCMD_RST, USBCMD_RST);
|
|
while (hw_read(ci, OP_USBCMD, USBCMD_RST))
|
|
udelay(10); /* not RTOS friendly */
|
|
|
|
hw_phymode_configure(ci);
|
|
|
|
if (ci->platdata->notify_event)
|
|
ci->platdata->notify_event(ci,
|
|
CI13XXX_CONTROLLER_RESET_EVENT);
|
|
|
|
if (ci->platdata->flags & CI13XXX_DISABLE_STREAMING)
|
|
hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
|
|
|
|
/* USBMODE should be configured step by step */
|
|
hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE);
|
|
hw_write(ci, OP_USBMODE, USBMODE_CM, mode);
|
|
/* HW >= 2.3 */
|
|
hw_write(ci, OP_USBMODE, USBMODE_SLOM, USBMODE_SLOM);
|
|
|
|
if (hw_read(ci, OP_USBMODE, USBMODE_CM) != mode) {
|
|
pr_err("cannot enter in %s mode", ci_role(ci)->name);
|
|
pr_err("lpm = %i", ci->hw_bank.lpm);
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ci_otg_role - pick role based on ID pin state
|
|
* @ci: the controller
|
|
*/
|
|
static enum ci_role ci_otg_role(struct ci13xxx *ci)
|
|
{
|
|
u32 sts = hw_read(ci, OP_OTGSC, ~0);
|
|
enum ci_role role = sts & OTGSC_ID
|
|
? CI_ROLE_GADGET
|
|
: CI_ROLE_HOST;
|
|
|
|
return role;
|
|
}
|
|
|
|
/**
|
|
* ci_role_work - perform role changing based on ID pin
|
|
* @work: work struct
|
|
*/
|
|
static void ci_role_work(struct work_struct *work)
|
|
{
|
|
struct ci13xxx *ci = container_of(work, struct ci13xxx, work);
|
|
enum ci_role role = ci_otg_role(ci);
|
|
|
|
if (role != ci->role) {
|
|
dev_dbg(ci->dev, "switching from %s to %s\n",
|
|
ci_role(ci)->name, ci->roles[role]->name);
|
|
|
|
ci_role_stop(ci);
|
|
ci_role_start(ci, role);
|
|
}
|
|
|
|
enable_irq(ci->irq);
|
|
}
|
|
|
|
static irqreturn_t ci_irq(int irq, void *data)
|
|
{
|
|
struct ci13xxx *ci = data;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
u32 otgsc = 0;
|
|
|
|
if (ci->is_otg)
|
|
otgsc = hw_read(ci, OP_OTGSC, ~0);
|
|
|
|
if (ci->role != CI_ROLE_END)
|
|
ret = ci_role(ci)->irq(ci);
|
|
|
|
if (ci->is_otg && (otgsc & OTGSC_IDIS)) {
|
|
hw_write(ci, OP_OTGSC, OTGSC_IDIS, OTGSC_IDIS);
|
|
disable_irq_nosync(ci->irq);
|
|
queue_work(ci->wq, &ci->work);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static DEFINE_IDA(ci_ida);
|
|
|
|
struct platform_device *ci13xxx_add_device(struct device *dev,
|
|
struct resource *res, int nres,
|
|
struct ci13xxx_platform_data *platdata)
|
|
{
|
|
struct platform_device *pdev;
|
|
int id, ret;
|
|
|
|
id = ida_simple_get(&ci_ida, 0, 0, GFP_KERNEL);
|
|
if (id < 0)
|
|
return ERR_PTR(id);
|
|
|
|
pdev = platform_device_alloc("ci_hdrc", id);
|
|
if (!pdev) {
|
|
ret = -ENOMEM;
|
|
goto put_id;
|
|
}
|
|
|
|
pdev->dev.parent = dev;
|
|
pdev->dev.dma_mask = dev->dma_mask;
|
|
pdev->dev.dma_parms = dev->dma_parms;
|
|
dma_set_coherent_mask(&pdev->dev, dev->coherent_dma_mask);
|
|
|
|
ret = platform_device_add_resources(pdev, res, nres);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = platform_device_add_data(pdev, platdata, sizeof(*platdata));
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = platform_device_add(pdev);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return pdev;
|
|
|
|
err:
|
|
platform_device_put(pdev);
|
|
put_id:
|
|
ida_simple_remove(&ci_ida, id);
|
|
return ERR_PTR(ret);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ci13xxx_add_device);
|
|
|
|
void ci13xxx_remove_device(struct platform_device *pdev)
|
|
{
|
|
int id = pdev->id;
|
|
platform_device_unregister(pdev);
|
|
ida_simple_remove(&ci_ida, id);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ci13xxx_remove_device);
|
|
|
|
static int ci_hdrc_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct ci13xxx *ci;
|
|
struct resource *res;
|
|
void __iomem *base;
|
|
int ret;
|
|
enum usb_dr_mode dr_mode;
|
|
|
|
if (!dev->platform_data) {
|
|
dev_err(dev, "platform data missing\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (!dev->of_node && dev->parent)
|
|
dev->of_node = dev->parent->of_node;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(base))
|
|
return PTR_ERR(base);
|
|
|
|
ci = devm_kzalloc(dev, sizeof(*ci), GFP_KERNEL);
|
|
if (!ci) {
|
|
dev_err(dev, "can't allocate device\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
ci->dev = dev;
|
|
ci->platdata = dev->platform_data;
|
|
if (ci->platdata->phy)
|
|
ci->transceiver = ci->platdata->phy;
|
|
else
|
|
ci->global_phy = true;
|
|
|
|
ret = hw_device_init(ci, base);
|
|
if (ret < 0) {
|
|
dev_err(dev, "can't initialize hardware\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
ci->hw_bank.phys = res->start;
|
|
|
|
ci->irq = platform_get_irq(pdev, 0);
|
|
if (ci->irq < 0) {
|
|
dev_err(dev, "missing IRQ\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
INIT_WORK(&ci->work, ci_role_work);
|
|
ci->wq = create_singlethread_workqueue("ci_otg");
|
|
if (!ci->wq) {
|
|
dev_err(dev, "can't create workqueue\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (!ci->platdata->phy_mode)
|
|
ci->platdata->phy_mode = of_usb_get_phy_mode(dev->of_node);
|
|
|
|
if (!ci->platdata->dr_mode)
|
|
ci->platdata->dr_mode = of_usb_get_dr_mode(dev->of_node);
|
|
|
|
if (ci->platdata->dr_mode == USB_DR_MODE_UNKNOWN)
|
|
ci->platdata->dr_mode = USB_DR_MODE_OTG;
|
|
|
|
dr_mode = ci->platdata->dr_mode;
|
|
/* initialize role(s) before the interrupt is requested */
|
|
if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
|
|
ret = ci_hdrc_host_init(ci);
|
|
if (ret)
|
|
dev_info(dev, "doesn't support host\n");
|
|
}
|
|
|
|
if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) {
|
|
ret = ci_hdrc_gadget_init(ci);
|
|
if (ret)
|
|
dev_info(dev, "doesn't support gadget\n");
|
|
}
|
|
|
|
if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) {
|
|
dev_err(dev, "no supported roles\n");
|
|
ret = -ENODEV;
|
|
goto rm_wq;
|
|
}
|
|
|
|
if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) {
|
|
ci->is_otg = true;
|
|
/* ID pin needs 1ms debouce time, we delay 2ms for safe */
|
|
mdelay(2);
|
|
ci->role = ci_otg_role(ci);
|
|
} else {
|
|
ci->role = ci->roles[CI_ROLE_HOST]
|
|
? CI_ROLE_HOST
|
|
: CI_ROLE_GADGET;
|
|
}
|
|
|
|
ret = ci_role_start(ci, ci->role);
|
|
if (ret) {
|
|
dev_err(dev, "can't start %s role\n", ci_role(ci)->name);
|
|
ret = -ENODEV;
|
|
goto rm_wq;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, ci);
|
|
ret = request_irq(ci->irq, ci_irq, IRQF_SHARED, ci->platdata->name,
|
|
ci);
|
|
if (ret)
|
|
goto stop;
|
|
|
|
if (ci->is_otg)
|
|
hw_write(ci, OP_OTGSC, OTGSC_IDIE, OTGSC_IDIE);
|
|
|
|
ret = dbg_create_files(ci);
|
|
if (!ret)
|
|
return 0;
|
|
|
|
free_irq(ci->irq, ci);
|
|
stop:
|
|
ci_role_stop(ci);
|
|
rm_wq:
|
|
flush_workqueue(ci->wq);
|
|
destroy_workqueue(ci->wq);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ci_hdrc_remove(struct platform_device *pdev)
|
|
{
|
|
struct ci13xxx *ci = platform_get_drvdata(pdev);
|
|
|
|
dbg_remove_files(ci);
|
|
flush_workqueue(ci->wq);
|
|
destroy_workqueue(ci->wq);
|
|
free_irq(ci->irq, ci);
|
|
ci_role_stop(ci);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver ci_hdrc_driver = {
|
|
.probe = ci_hdrc_probe,
|
|
.remove = ci_hdrc_remove,
|
|
.driver = {
|
|
.name = "ci_hdrc",
|
|
},
|
|
};
|
|
|
|
module_platform_driver(ci_hdrc_driver);
|
|
|
|
MODULE_ALIAS("platform:ci_hdrc");
|
|
MODULE_ALIAS("platform:ci13xxx");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("David Lopo <dlopo@chipidea.mips.com>");
|
|
MODULE_DESCRIPTION("ChipIdea HDRC Driver");
|