Bin Liu 9267edaf8c usb: musb: cppi41: fix not transmitting zero length packet issue ... CPPI TX does not transmit ZLP for TX transfers which - transfer size is multiple of EP packet size, - and URB_ZERO_PACKET is set in urb->transfer_flags. The fix is transmitting the ZLP using PIO mode after the CPPI TX is done. Validated using the following usbtest write case in MUSB host mode. # testusb -t1 -c1 Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>		2014-09-03 09:15:56 -05:00
..
Kconfig	usb: musb: omap2plus bus glue needs USB host support	2014-05-14 09:23:32 -05:00
Makefile	usb: musb: add support for JZ4740 usb device controller	2013-12-20 09:53:24 -06:00
am35x.c	usb: phy: generic: allow multiples calls to usb_phy_generic_register()	2014-04-21 14:07:25 -05:00
blackfin.c	usb: musb: backfin: Introduce the use of the managed version of kzalloc	2014-06-30 12:26:57 -05:00
blackfin.h	usb: musb: drop a gigantic amount of ifdeferry	2011-07-01 14:31:10 -07:00
cppi_dma.c	usb: musb: dma: merge ->start/stop into create/destroy	2013-07-29 13:53:18 +03:00
cppi_dma.h	…
da8xx.c	usb: phy: generic: allow multiples calls to usb_phy_generic_register()	2014-04-21 14:07:25 -05:00
davinci.c	usb: musb: davinci: use devm_ functions.	2014-06-30 12:26:48 -05:00
davinci.h	usb: musb: davinci: Fix build breakage	2012-06-04 18:29:42 +03:00
jz4740.c	usb: musb: register nop transceiver driver for jz4740	2014-07-10 08:36:50 -05:00
musb_am335x.c	usb: musb: Fix panic upon musb_am335x module removal	2014-06-27 10:53:06 -05:00
musb_core.c	usb: musb: core: Convert the musb_platform_reset to have a return value.	2014-07-16 09:59:58 -05:00
musb_core.h	usb: musb: core: Convert the musb_platform_reset to have a return value.	2014-07-16 09:59:58 -05:00
musb_cppi41.c	usb: musb: cppi41: fix not transmitting zero length packet issue	2014-09-03 09:15:56 -05:00
musb_debug.h	usb: musb: remove extern qualifier from musb_debug.h header	2011-12-21 13:21:02 +02:00
musb_debugfs.c	usb: remove use of __devinit	2012-11-21 13:27:16 -08:00
musb_dma.h	usb: musb: introduce dma_channel.rx_packet_done	2014-06-30 14:26:24 -05:00
musb_dsps.c	usb: patches for v3.17 merge window	2014-07-21 11:33:41 -07:00
musb_gadget.c	usb: musb: fix setting JZ4740 gadget periphal mode on reset	2013-12-20 09:53:59 -06:00
musb_gadget.h	usb: musb: add Kconfig options for HOST, GAGDET or DUAL_ROLE modes	2013-05-28 19:22:23 +03:00
musb_gadget_ep0.c	usb: musb: gadget: read ep0 fifo only if rxcount is non zero	2013-04-02 11:42:50 +03:00
musb_host.c	usb: musb: fix wrong indentation in musb_host.c	2014-06-30 14:26:27 -05:00
musb_host.h	usb: musb: fix prototype for musb_port_reset	2013-12-20 15:05:43 -06:00
musb_io.h	usb: musb: use io{read,write}*_rep accessors	2012-12-17 17:15:13 -08:00
musb_regs.h	usb: musb: dsps: Add the sw_babble_control() and Enable for newer silicon	2014-07-16 10:00:02 -05:00
musb_virthub.c	usb: musb: correct use of schedule_delayed_work()	2014-02-20 09:17:24 -06:00
musbhsdma.c	usb: musb: dma: merge ->start/stop into create/destroy	2013-07-29 13:53:18 +03:00
musbhsdma.h	usb: musb: remove generic_interrupt	2012-11-06 15:32:13 +02:00
omap2430.c	usb: musb: omap2430: make sure clocks are enabled when running mailbox	2014-04-15 12:08:02 -05:00
omap2430.h	usb: start using the control module driver	2013-01-25 12:27:24 +02:00
tusb6010.c	usb: musb: tusb6010: Introduce the use of the managed version of kzalloc	2014-06-30 12:26:49 -05:00
tusb6010.h	usb: musb: tusb6010: Use musb->tusb_revision instead of tusb_get_revision call.	2014-05-16 12:16:31 -05:00
tusb6010_omap.c	usb: musb: tusb6010: Use musb->tusb_revision instead of tusb_get_revision call.	2014-05-16 12:16:31 -05:00
ux500.c	usb: patches for v3.17 merge window	2014-07-21 11:33:41 -07:00
ux500_dma.c	usb: musb: ux500: fix decimal printf format specifiers prefixed with 0x	2014-08-19 09:24:45 -05:00