1309 lines
33 KiB
C
1309 lines
33 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* i740fb - framebuffer driver for Intel740
|
|
* Copyright (c) 2011 Ondrej Zary
|
|
*
|
|
* Based on old i740fb driver (c) 2001-2002 Andrey Ulanov <drey@rt.mipt.ru>
|
|
* which was partially based on:
|
|
* VGA 16-color framebuffer driver (c) 1999 Ben Pfaff <pfaffben@debian.org>
|
|
* and Petr Vandrovec <VANDROVE@vc.cvut.cz>
|
|
* i740 driver from XFree86 (c) 1998-1999 Precision Insight, Inc., Cedar Park,
|
|
* Texas.
|
|
* i740fb by Patrick LERDA, v0.9
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/string.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/pci_ids.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c-algo-bit.h>
|
|
#include <linux/console.h>
|
|
#include <video/vga.h>
|
|
|
|
#include "i740_reg.h"
|
|
|
|
static char *mode_option;
|
|
static int mtrr = 1;
|
|
|
|
struct i740fb_par {
|
|
unsigned char __iomem *regs;
|
|
bool has_sgram;
|
|
int wc_cookie;
|
|
bool ddc_registered;
|
|
struct i2c_adapter ddc_adapter;
|
|
struct i2c_algo_bit_data ddc_algo;
|
|
u32 pseudo_palette[16];
|
|
struct mutex open_lock;
|
|
unsigned int ref_count;
|
|
|
|
u8 crtc[VGA_CRT_C];
|
|
u8 atc[VGA_ATT_C];
|
|
u8 gdc[VGA_GFX_C];
|
|
u8 seq[VGA_SEQ_C];
|
|
u8 misc;
|
|
u8 vss;
|
|
|
|
/* i740 specific registers */
|
|
u8 display_cntl;
|
|
u8 pixelpipe_cfg0;
|
|
u8 pixelpipe_cfg1;
|
|
u8 pixelpipe_cfg2;
|
|
u8 video_clk2_m;
|
|
u8 video_clk2_n;
|
|
u8 video_clk2_mn_msbs;
|
|
u8 video_clk2_div_sel;
|
|
u8 pll_cntl;
|
|
u8 address_mapping;
|
|
u8 io_cntl;
|
|
u8 bitblt_cntl;
|
|
u8 ext_vert_total;
|
|
u8 ext_vert_disp_end;
|
|
u8 ext_vert_sync_start;
|
|
u8 ext_vert_blank_start;
|
|
u8 ext_horiz_total;
|
|
u8 ext_horiz_blank;
|
|
u8 ext_offset;
|
|
u8 interlace_cntl;
|
|
u32 lmi_fifo_watermark;
|
|
u8 ext_start_addr;
|
|
u8 ext_start_addr_hi;
|
|
};
|
|
|
|
#define DACSPEED8 203
|
|
#define DACSPEED16 163
|
|
#define DACSPEED24_SG 136
|
|
#define DACSPEED24_SD 128
|
|
#define DACSPEED32 86
|
|
|
|
static const struct fb_fix_screeninfo i740fb_fix = {
|
|
.id = "i740fb",
|
|
.type = FB_TYPE_PACKED_PIXELS,
|
|
.visual = FB_VISUAL_TRUECOLOR,
|
|
.xpanstep = 8,
|
|
.ypanstep = 1,
|
|
.accel = FB_ACCEL_NONE,
|
|
};
|
|
|
|
static inline void i740outb(struct i740fb_par *par, u16 port, u8 val)
|
|
{
|
|
vga_mm_w(par->regs, port, val);
|
|
}
|
|
static inline u8 i740inb(struct i740fb_par *par, u16 port)
|
|
{
|
|
return vga_mm_r(par->regs, port);
|
|
}
|
|
static inline void i740outreg(struct i740fb_par *par, u16 port, u8 reg, u8 val)
|
|
{
|
|
vga_mm_w_fast(par->regs, port, reg, val);
|
|
}
|
|
static inline u8 i740inreg(struct i740fb_par *par, u16 port, u8 reg)
|
|
{
|
|
vga_mm_w(par->regs, port, reg);
|
|
return vga_mm_r(par->regs, port+1);
|
|
}
|
|
static inline void i740outreg_mask(struct i740fb_par *par, u16 port, u8 reg,
|
|
u8 val, u8 mask)
|
|
{
|
|
vga_mm_w_fast(par->regs, port, reg, (val & mask)
|
|
| (i740inreg(par, port, reg) & ~mask));
|
|
}
|
|
|
|
#define REG_DDC_DRIVE 0x62
|
|
#define REG_DDC_STATE 0x63
|
|
#define DDC_SCL (1 << 3)
|
|
#define DDC_SDA (1 << 2)
|
|
|
|
static void i740fb_ddc_setscl(void *data, int val)
|
|
{
|
|
struct i740fb_par *par = data;
|
|
|
|
i740outreg_mask(par, XRX, REG_DDC_DRIVE, DDC_SCL, DDC_SCL);
|
|
i740outreg_mask(par, XRX, REG_DDC_STATE, val ? DDC_SCL : 0, DDC_SCL);
|
|
}
|
|
|
|
static void i740fb_ddc_setsda(void *data, int val)
|
|
{
|
|
struct i740fb_par *par = data;
|
|
|
|
i740outreg_mask(par, XRX, REG_DDC_DRIVE, DDC_SDA, DDC_SDA);
|
|
i740outreg_mask(par, XRX, REG_DDC_STATE, val ? DDC_SDA : 0, DDC_SDA);
|
|
}
|
|
|
|
static int i740fb_ddc_getscl(void *data)
|
|
{
|
|
struct i740fb_par *par = data;
|
|
|
|
i740outreg_mask(par, XRX, REG_DDC_DRIVE, 0, DDC_SCL);
|
|
|
|
return !!(i740inreg(par, XRX, REG_DDC_STATE) & DDC_SCL);
|
|
}
|
|
|
|
static int i740fb_ddc_getsda(void *data)
|
|
{
|
|
struct i740fb_par *par = data;
|
|
|
|
i740outreg_mask(par, XRX, REG_DDC_DRIVE, 0, DDC_SDA);
|
|
|
|
return !!(i740inreg(par, XRX, REG_DDC_STATE) & DDC_SDA);
|
|
}
|
|
|
|
static int i740fb_setup_ddc_bus(struct fb_info *info)
|
|
{
|
|
struct i740fb_par *par = info->par;
|
|
|
|
strlcpy(par->ddc_adapter.name, info->fix.id,
|
|
sizeof(par->ddc_adapter.name));
|
|
par->ddc_adapter.owner = THIS_MODULE;
|
|
par->ddc_adapter.class = I2C_CLASS_DDC;
|
|
par->ddc_adapter.algo_data = &par->ddc_algo;
|
|
par->ddc_adapter.dev.parent = info->device;
|
|
par->ddc_algo.setsda = i740fb_ddc_setsda;
|
|
par->ddc_algo.setscl = i740fb_ddc_setscl;
|
|
par->ddc_algo.getsda = i740fb_ddc_getsda;
|
|
par->ddc_algo.getscl = i740fb_ddc_getscl;
|
|
par->ddc_algo.udelay = 10;
|
|
par->ddc_algo.timeout = 20;
|
|
par->ddc_algo.data = par;
|
|
|
|
i2c_set_adapdata(&par->ddc_adapter, par);
|
|
|
|
return i2c_bit_add_bus(&par->ddc_adapter);
|
|
}
|
|
|
|
static int i740fb_open(struct fb_info *info, int user)
|
|
{
|
|
struct i740fb_par *par = info->par;
|
|
|
|
mutex_lock(&(par->open_lock));
|
|
par->ref_count++;
|
|
mutex_unlock(&(par->open_lock));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i740fb_release(struct fb_info *info, int user)
|
|
{
|
|
struct i740fb_par *par = info->par;
|
|
|
|
mutex_lock(&(par->open_lock));
|
|
if (par->ref_count == 0) {
|
|
fb_err(info, "release called with zero refcount\n");
|
|
mutex_unlock(&(par->open_lock));
|
|
return -EINVAL;
|
|
}
|
|
|
|
par->ref_count--;
|
|
mutex_unlock(&(par->open_lock));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u32 i740_calc_fifo(struct i740fb_par *par, u32 freq, int bpp)
|
|
{
|
|
/*
|
|
* Would like to calculate these values automatically, but a generic
|
|
* algorithm does not seem possible. Note: These FIFO water mark
|
|
* values were tested on several cards and seem to eliminate the
|
|
* all of the snow and vertical banding, but fine adjustments will
|
|
* probably be required for other cards.
|
|
*/
|
|
|
|
u32 wm;
|
|
|
|
switch (bpp) {
|
|
case 8:
|
|
if (freq > 200)
|
|
wm = 0x18120000;
|
|
else if (freq > 175)
|
|
wm = 0x16110000;
|
|
else if (freq > 135)
|
|
wm = 0x120E0000;
|
|
else
|
|
wm = 0x100D0000;
|
|
break;
|
|
case 15:
|
|
case 16:
|
|
if (par->has_sgram) {
|
|
if (freq > 140)
|
|
wm = 0x2C1D0000;
|
|
else if (freq > 120)
|
|
wm = 0x2C180000;
|
|
else if (freq > 100)
|
|
wm = 0x24160000;
|
|
else if (freq > 90)
|
|
wm = 0x18120000;
|
|
else if (freq > 50)
|
|
wm = 0x16110000;
|
|
else if (freq > 32)
|
|
wm = 0x13100000;
|
|
else
|
|
wm = 0x120E0000;
|
|
} else {
|
|
if (freq > 160)
|
|
wm = 0x28200000;
|
|
else if (freq > 140)
|
|
wm = 0x2A1E0000;
|
|
else if (freq > 130)
|
|
wm = 0x2B1A0000;
|
|
else if (freq > 120)
|
|
wm = 0x2C180000;
|
|
else if (freq > 100)
|
|
wm = 0x24180000;
|
|
else if (freq > 90)
|
|
wm = 0x18120000;
|
|
else if (freq > 50)
|
|
wm = 0x16110000;
|
|
else if (freq > 32)
|
|
wm = 0x13100000;
|
|
else
|
|
wm = 0x120E0000;
|
|
}
|
|
break;
|
|
case 24:
|
|
if (par->has_sgram) {
|
|
if (freq > 130)
|
|
wm = 0x31200000;
|
|
else if (freq > 120)
|
|
wm = 0x2E200000;
|
|
else if (freq > 100)
|
|
wm = 0x2C1D0000;
|
|
else if (freq > 80)
|
|
wm = 0x25180000;
|
|
else if (freq > 64)
|
|
wm = 0x24160000;
|
|
else if (freq > 49)
|
|
wm = 0x18120000;
|
|
else if (freq > 32)
|
|
wm = 0x16110000;
|
|
else
|
|
wm = 0x13100000;
|
|
} else {
|
|
if (freq > 120)
|
|
wm = 0x311F0000;
|
|
else if (freq > 100)
|
|
wm = 0x2C1D0000;
|
|
else if (freq > 80)
|
|
wm = 0x25180000;
|
|
else if (freq > 64)
|
|
wm = 0x24160000;
|
|
else if (freq > 49)
|
|
wm = 0x18120000;
|
|
else if (freq > 32)
|
|
wm = 0x16110000;
|
|
else
|
|
wm = 0x13100000;
|
|
}
|
|
break;
|
|
case 32:
|
|
if (par->has_sgram) {
|
|
if (freq > 80)
|
|
wm = 0x2A200000;
|
|
else if (freq > 60)
|
|
wm = 0x281A0000;
|
|
else if (freq > 49)
|
|
wm = 0x25180000;
|
|
else if (freq > 32)
|
|
wm = 0x18120000;
|
|
else
|
|
wm = 0x16110000;
|
|
} else {
|
|
if (freq > 80)
|
|
wm = 0x29200000;
|
|
else if (freq > 60)
|
|
wm = 0x281A0000;
|
|
else if (freq > 49)
|
|
wm = 0x25180000;
|
|
else if (freq > 32)
|
|
wm = 0x18120000;
|
|
else
|
|
wm = 0x16110000;
|
|
}
|
|
break;
|
|
}
|
|
|
|
return wm;
|
|
}
|
|
|
|
/* clock calculation from i740fb by Patrick LERDA */
|
|
|
|
#define I740_RFREQ 1000000
|
|
#define TARGET_MAX_N 30
|
|
#define I740_FFIX (1 << 8)
|
|
#define I740_RFREQ_FIX (I740_RFREQ / I740_FFIX)
|
|
#define I740_REF_FREQ (6667 * I740_FFIX / 100) /* 66.67 MHz */
|
|
#define I740_MAX_VCO_FREQ (450 * I740_FFIX) /* 450 MHz */
|
|
|
|
static void i740_calc_vclk(u32 freq, struct i740fb_par *par)
|
|
{
|
|
const u32 err_max = freq / (200 * I740_RFREQ / I740_FFIX);
|
|
const u32 err_target = freq / (1000 * I740_RFREQ / I740_FFIX);
|
|
u32 err_best = 512 * I740_FFIX;
|
|
u32 f_err, f_vco;
|
|
int m_best = 0, n_best = 0, p_best = 0;
|
|
int m, n;
|
|
|
|
p_best = min(15, ilog2(I740_MAX_VCO_FREQ / (freq / I740_RFREQ_FIX)));
|
|
f_vco = (freq * (1 << p_best)) / I740_RFREQ_FIX;
|
|
freq = freq / I740_RFREQ_FIX;
|
|
|
|
n = 2;
|
|
do {
|
|
n++;
|
|
m = ((f_vco * n) / I740_REF_FREQ + 2) / 4;
|
|
|
|
if (m < 3)
|
|
m = 3;
|
|
|
|
{
|
|
u32 f_out = (((m * I740_REF_FREQ * 4)
|
|
/ n) + ((1 << p_best) / 2)) / (1 << p_best);
|
|
|
|
f_err = (freq - f_out);
|
|
|
|
if (abs(f_err) < err_max) {
|
|
m_best = m;
|
|
n_best = n;
|
|
err_best = f_err;
|
|
}
|
|
}
|
|
} while ((abs(f_err) >= err_target) &&
|
|
((n <= TARGET_MAX_N) || (abs(err_best) > err_max)));
|
|
|
|
if (abs(f_err) < err_target) {
|
|
m_best = m;
|
|
n_best = n;
|
|
}
|
|
|
|
par->video_clk2_m = (m_best - 2) & 0xFF;
|
|
par->video_clk2_n = (n_best - 2) & 0xFF;
|
|
par->video_clk2_mn_msbs = ((((n_best - 2) >> 4) & VCO_N_MSBS)
|
|
| (((m_best - 2) >> 8) & VCO_M_MSBS));
|
|
par->video_clk2_div_sel = ((p_best << 4) | REF_DIV_1);
|
|
}
|
|
|
|
static int i740fb_decode_var(const struct fb_var_screeninfo *var,
|
|
struct i740fb_par *par, struct fb_info *info)
|
|
{
|
|
/*
|
|
* Get the video params out of 'var'.
|
|
* If a value doesn't fit, round it up, if it's too big, return -EINVAL.
|
|
*/
|
|
|
|
u32 xres, right, hslen, left, xtotal;
|
|
u32 yres, lower, vslen, upper, ytotal;
|
|
u32 vxres, xoffset, vyres, yoffset;
|
|
u32 bpp, base, dacspeed24, mem;
|
|
u8 r7;
|
|
int i;
|
|
|
|
dev_dbg(info->device, "decode_var: xres: %i, yres: %i, xres_v: %i, xres_v: %i\n",
|
|
var->xres, var->yres, var->xres_virtual, var->xres_virtual);
|
|
dev_dbg(info->device, " xoff: %i, yoff: %i, bpp: %i, graysc: %i\n",
|
|
var->xoffset, var->yoffset, var->bits_per_pixel,
|
|
var->grayscale);
|
|
dev_dbg(info->device, " activate: %i, nonstd: %i, vmode: %i\n",
|
|
var->activate, var->nonstd, var->vmode);
|
|
dev_dbg(info->device, " pixclock: %i, hsynclen:%i, vsynclen:%i\n",
|
|
var->pixclock, var->hsync_len, var->vsync_len);
|
|
dev_dbg(info->device, " left: %i, right: %i, up:%i, lower:%i\n",
|
|
var->left_margin, var->right_margin, var->upper_margin,
|
|
var->lower_margin);
|
|
|
|
|
|
bpp = var->bits_per_pixel;
|
|
switch (bpp) {
|
|
case 1 ... 8:
|
|
bpp = 8;
|
|
if ((1000000 / var->pixclock) > DACSPEED8) {
|
|
dev_err(info->device, "requested pixclock %i MHz out of range (max. %i MHz at 8bpp)\n",
|
|
1000000 / var->pixclock, DACSPEED8);
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
case 9 ... 15:
|
|
bpp = 15;
|
|
/* fall through */
|
|
case 16:
|
|
if ((1000000 / var->pixclock) > DACSPEED16) {
|
|
dev_err(info->device, "requested pixclock %i MHz out of range (max. %i MHz at 15/16bpp)\n",
|
|
1000000 / var->pixclock, DACSPEED16);
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
case 17 ... 24:
|
|
bpp = 24;
|
|
dacspeed24 = par->has_sgram ? DACSPEED24_SG : DACSPEED24_SD;
|
|
if ((1000000 / var->pixclock) > dacspeed24) {
|
|
dev_err(info->device, "requested pixclock %i MHz out of range (max. %i MHz at 24bpp)\n",
|
|
1000000 / var->pixclock, dacspeed24);
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
case 25 ... 32:
|
|
bpp = 32;
|
|
if ((1000000 / var->pixclock) > DACSPEED32) {
|
|
dev_err(info->device, "requested pixclock %i MHz out of range (max. %i MHz at 32bpp)\n",
|
|
1000000 / var->pixclock, DACSPEED32);
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
xres = ALIGN(var->xres, 8);
|
|
vxres = ALIGN(var->xres_virtual, 16);
|
|
if (vxres < xres)
|
|
vxres = xres;
|
|
|
|
xoffset = ALIGN(var->xoffset, 8);
|
|
if (xres + xoffset > vxres)
|
|
xoffset = vxres - xres;
|
|
|
|
left = ALIGN(var->left_margin, 8);
|
|
right = ALIGN(var->right_margin, 8);
|
|
hslen = ALIGN(var->hsync_len, 8);
|
|
|
|
yres = var->yres;
|
|
vyres = var->yres_virtual;
|
|
if (yres > vyres)
|
|
vyres = yres;
|
|
|
|
yoffset = var->yoffset;
|
|
if (yres + yoffset > vyres)
|
|
yoffset = vyres - yres;
|
|
|
|
lower = var->lower_margin;
|
|
vslen = var->vsync_len;
|
|
upper = var->upper_margin;
|
|
|
|
mem = vxres * vyres * ((bpp + 1) / 8);
|
|
if (mem > info->screen_size) {
|
|
dev_err(info->device, "not enough video memory (%d KB requested, %ld KB available)\n",
|
|
mem >> 10, info->screen_size >> 10);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (yoffset + yres > vyres)
|
|
yoffset = vyres - yres;
|
|
|
|
xtotal = xres + right + hslen + left;
|
|
ytotal = yres + lower + vslen + upper;
|
|
|
|
par->crtc[VGA_CRTC_H_TOTAL] = (xtotal >> 3) - 5;
|
|
par->crtc[VGA_CRTC_H_DISP] = (xres >> 3) - 1;
|
|
par->crtc[VGA_CRTC_H_BLANK_START] = ((xres + right) >> 3) - 1;
|
|
par->crtc[VGA_CRTC_H_SYNC_START] = (xres + right) >> 3;
|
|
par->crtc[VGA_CRTC_H_SYNC_END] = (((xres + right + hslen) >> 3) & 0x1F)
|
|
| ((((xres + right + hslen) >> 3) & 0x20) << 2);
|
|
par->crtc[VGA_CRTC_H_BLANK_END] = ((xres + right + hslen) >> 3 & 0x1F)
|
|
| 0x80;
|
|
|
|
par->crtc[VGA_CRTC_V_TOTAL] = ytotal - 2;
|
|
|
|
r7 = 0x10; /* disable linecompare */
|
|
if (ytotal & 0x100)
|
|
r7 |= 0x01;
|
|
if (ytotal & 0x200)
|
|
r7 |= 0x20;
|
|
|
|
par->crtc[VGA_CRTC_PRESET_ROW] = 0;
|
|
par->crtc[VGA_CRTC_MAX_SCAN] = 0x40; /* 1 scanline, no linecmp */
|
|
if (var->vmode & FB_VMODE_DOUBLE)
|
|
par->crtc[VGA_CRTC_MAX_SCAN] |= 0x80;
|
|
par->crtc[VGA_CRTC_CURSOR_START] = 0x00;
|
|
par->crtc[VGA_CRTC_CURSOR_END] = 0x00;
|
|
par->crtc[VGA_CRTC_CURSOR_HI] = 0x00;
|
|
par->crtc[VGA_CRTC_CURSOR_LO] = 0x00;
|
|
par->crtc[VGA_CRTC_V_DISP_END] = yres-1;
|
|
if ((yres-1) & 0x100)
|
|
r7 |= 0x02;
|
|
if ((yres-1) & 0x200)
|
|
r7 |= 0x40;
|
|
|
|
par->crtc[VGA_CRTC_V_BLANK_START] = yres + lower - 1;
|
|
par->crtc[VGA_CRTC_V_SYNC_START] = yres + lower - 1;
|
|
if ((yres + lower - 1) & 0x100)
|
|
r7 |= 0x0C;
|
|
if ((yres + lower - 1) & 0x200) {
|
|
par->crtc[VGA_CRTC_MAX_SCAN] |= 0x20;
|
|
r7 |= 0x80;
|
|
}
|
|
|
|
/* disabled IRQ */
|
|
par->crtc[VGA_CRTC_V_SYNC_END] =
|
|
((yres + lower - 1 + vslen) & 0x0F) & ~0x10;
|
|
/* 0x7F for VGA, but some SVGA chips require all 8 bits to be set */
|
|
par->crtc[VGA_CRTC_V_BLANK_END] = (yres + lower - 1 + vslen) & 0xFF;
|
|
|
|
par->crtc[VGA_CRTC_UNDERLINE] = 0x00;
|
|
par->crtc[VGA_CRTC_MODE] = 0xC3 ;
|
|
par->crtc[VGA_CRTC_LINE_COMPARE] = 0xFF;
|
|
par->crtc[VGA_CRTC_OVERFLOW] = r7;
|
|
|
|
par->vss = 0x00; /* 3DA */
|
|
|
|
for (i = 0x00; i < 0x10; i++)
|
|
par->atc[i] = i;
|
|
par->atc[VGA_ATC_MODE] = 0x81;
|
|
par->atc[VGA_ATC_OVERSCAN] = 0x00; /* 0 for EGA, 0xFF for VGA */
|
|
par->atc[VGA_ATC_PLANE_ENABLE] = 0x0F;
|
|
par->atc[VGA_ATC_COLOR_PAGE] = 0x00;
|
|
|
|
par->misc = 0xC3;
|
|
if (var->sync & FB_SYNC_HOR_HIGH_ACT)
|
|
par->misc &= ~0x40;
|
|
if (var->sync & FB_SYNC_VERT_HIGH_ACT)
|
|
par->misc &= ~0x80;
|
|
|
|
par->seq[VGA_SEQ_CLOCK_MODE] = 0x01;
|
|
par->seq[VGA_SEQ_PLANE_WRITE] = 0x0F;
|
|
par->seq[VGA_SEQ_CHARACTER_MAP] = 0x00;
|
|
par->seq[VGA_SEQ_MEMORY_MODE] = 0x06;
|
|
|
|
par->gdc[VGA_GFX_SR_VALUE] = 0x00;
|
|
par->gdc[VGA_GFX_SR_ENABLE] = 0x00;
|
|
par->gdc[VGA_GFX_COMPARE_VALUE] = 0x00;
|
|
par->gdc[VGA_GFX_DATA_ROTATE] = 0x00;
|
|
par->gdc[VGA_GFX_PLANE_READ] = 0;
|
|
par->gdc[VGA_GFX_MODE] = 0x02;
|
|
par->gdc[VGA_GFX_MISC] = 0x05;
|
|
par->gdc[VGA_GFX_COMPARE_MASK] = 0x0F;
|
|
par->gdc[VGA_GFX_BIT_MASK] = 0xFF;
|
|
|
|
base = (yoffset * vxres + (xoffset & ~7)) >> 2;
|
|
switch (bpp) {
|
|
case 8:
|
|
par->crtc[VGA_CRTC_OFFSET] = vxres >> 3;
|
|
par->ext_offset = vxres >> 11;
|
|
par->pixelpipe_cfg1 = DISPLAY_8BPP_MODE;
|
|
par->bitblt_cntl = COLEXP_8BPP;
|
|
break;
|
|
case 15: /* 0rrrrrgg gggbbbbb */
|
|
case 16: /* rrrrrggg gggbbbbb */
|
|
par->pixelpipe_cfg1 = (var->green.length == 6) ?
|
|
DISPLAY_16BPP_MODE : DISPLAY_15BPP_MODE;
|
|
par->crtc[VGA_CRTC_OFFSET] = vxres >> 2;
|
|
par->ext_offset = vxres >> 10;
|
|
par->bitblt_cntl = COLEXP_16BPP;
|
|
base *= 2;
|
|
break;
|
|
case 24:
|
|
par->crtc[VGA_CRTC_OFFSET] = (vxres * 3) >> 3;
|
|
par->ext_offset = (vxres * 3) >> 11;
|
|
par->pixelpipe_cfg1 = DISPLAY_24BPP_MODE;
|
|
par->bitblt_cntl = COLEXP_24BPP;
|
|
base &= 0xFFFFFFFE; /* ...ignore the last bit. */
|
|
base *= 3;
|
|
break;
|
|
case 32:
|
|
par->crtc[VGA_CRTC_OFFSET] = vxres >> 1;
|
|
par->ext_offset = vxres >> 9;
|
|
par->pixelpipe_cfg1 = DISPLAY_32BPP_MODE;
|
|
par->bitblt_cntl = COLEXP_RESERVED; /* Unimplemented on i740 */
|
|
base *= 4;
|
|
break;
|
|
}
|
|
|
|
par->crtc[VGA_CRTC_START_LO] = base & 0x000000FF;
|
|
par->crtc[VGA_CRTC_START_HI] = (base & 0x0000FF00) >> 8;
|
|
par->ext_start_addr =
|
|
((base & 0x003F0000) >> 16) | EXT_START_ADDR_ENABLE;
|
|
par->ext_start_addr_hi = (base & 0x3FC00000) >> 22;
|
|
|
|
par->pixelpipe_cfg0 = DAC_8_BIT;
|
|
|
|
par->pixelpipe_cfg2 = DISPLAY_GAMMA_ENABLE | OVERLAY_GAMMA_ENABLE;
|
|
par->io_cntl = EXTENDED_CRTC_CNTL;
|
|
par->address_mapping = LINEAR_MODE_ENABLE | PAGE_MAPPING_ENABLE;
|
|
par->display_cntl = HIRES_MODE;
|
|
|
|
/* Set the MCLK freq */
|
|
par->pll_cntl = PLL_MEMCLK_100000KHZ; /* 100 MHz -- use as default */
|
|
|
|
/* Calculate the extended CRTC regs */
|
|
par->ext_vert_total = (ytotal - 2) >> 8;
|
|
par->ext_vert_disp_end = (yres - 1) >> 8;
|
|
par->ext_vert_sync_start = (yres + lower) >> 8;
|
|
par->ext_vert_blank_start = (yres + lower) >> 8;
|
|
par->ext_horiz_total = ((xtotal >> 3) - 5) >> 8;
|
|
par->ext_horiz_blank = (((xres + right) >> 3) & 0x40) >> 6;
|
|
|
|
par->interlace_cntl = INTERLACE_DISABLE;
|
|
|
|
/* Set the overscan color to 0. (NOTE: This only affects >8bpp mode) */
|
|
par->atc[VGA_ATC_OVERSCAN] = 0;
|
|
|
|
/* Calculate VCLK that most closely matches the requested dot clock */
|
|
i740_calc_vclk((((u32)1e9) / var->pixclock) * (u32)(1e3), par);
|
|
|
|
/* Since we program the clocks ourselves, always use VCLK2. */
|
|
par->misc |= 0x0C;
|
|
|
|
/* Calculate the FIFO Watermark and Burst Length. */
|
|
par->lmi_fifo_watermark =
|
|
i740_calc_fifo(par, 1000000 / var->pixclock, bpp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i740fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
|
|
{
|
|
switch (var->bits_per_pixel) {
|
|
case 8:
|
|
var->red.offset = var->green.offset = var->blue.offset = 0;
|
|
var->red.length = var->green.length = var->blue.length = 8;
|
|
break;
|
|
case 16:
|
|
switch (var->green.length) {
|
|
default:
|
|
case 5:
|
|
var->red.offset = 10;
|
|
var->green.offset = 5;
|
|
var->blue.offset = 0;
|
|
var->red.length = 5;
|
|
var->green.length = 5;
|
|
var->blue.length = 5;
|
|
break;
|
|
case 6:
|
|
var->red.offset = 11;
|
|
var->green.offset = 5;
|
|
var->blue.offset = 0;
|
|
var->red.length = var->blue.length = 5;
|
|
break;
|
|
}
|
|
break;
|
|
case 24:
|
|
var->red.offset = 16;
|
|
var->green.offset = 8;
|
|
var->blue.offset = 0;
|
|
var->red.length = var->green.length = var->blue.length = 8;
|
|
break;
|
|
case 32:
|
|
var->transp.offset = 24;
|
|
var->red.offset = 16;
|
|
var->green.offset = 8;
|
|
var->blue.offset = 0;
|
|
var->transp.length = 8;
|
|
var->red.length = var->green.length = var->blue.length = 8;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (var->xres > var->xres_virtual)
|
|
var->xres_virtual = var->xres;
|
|
|
|
if (var->yres > var->yres_virtual)
|
|
var->yres_virtual = var->yres;
|
|
|
|
if (info->monspecs.hfmax && info->monspecs.vfmax &&
|
|
info->monspecs.dclkmax && fb_validate_mode(var, info) < 0)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void vga_protect(struct i740fb_par *par)
|
|
{
|
|
/* disable the display */
|
|
i740outreg_mask(par, VGA_SEQ_I, VGA_SEQ_CLOCK_MODE, 0x20, 0x20);
|
|
|
|
i740inb(par, 0x3DA);
|
|
i740outb(par, VGA_ATT_W, 0x00); /* enable palette access */
|
|
}
|
|
|
|
static void vga_unprotect(struct i740fb_par *par)
|
|
{
|
|
/* reenable display */
|
|
i740outreg_mask(par, VGA_SEQ_I, VGA_SEQ_CLOCK_MODE, 0, 0x20);
|
|
|
|
i740inb(par, 0x3DA);
|
|
i740outb(par, VGA_ATT_W, 0x20); /* disable palette access */
|
|
}
|
|
|
|
static int i740fb_set_par(struct fb_info *info)
|
|
{
|
|
struct i740fb_par *par = info->par;
|
|
u32 itemp;
|
|
int i;
|
|
|
|
i = i740fb_decode_var(&info->var, par, info);
|
|
if (i)
|
|
return i;
|
|
|
|
memset(info->screen_base, 0, info->screen_size);
|
|
|
|
vga_protect(par);
|
|
|
|
i740outreg(par, XRX, DRAM_EXT_CNTL, DRAM_REFRESH_DISABLE);
|
|
|
|
mdelay(1);
|
|
|
|
i740outreg(par, XRX, VCLK2_VCO_M, par->video_clk2_m);
|
|
i740outreg(par, XRX, VCLK2_VCO_N, par->video_clk2_n);
|
|
i740outreg(par, XRX, VCLK2_VCO_MN_MSBS, par->video_clk2_mn_msbs);
|
|
i740outreg(par, XRX, VCLK2_VCO_DIV_SEL, par->video_clk2_div_sel);
|
|
|
|
i740outreg_mask(par, XRX, PIXPIPE_CONFIG_0,
|
|
par->pixelpipe_cfg0 & DAC_8_BIT, 0x80);
|
|
|
|
i740inb(par, 0x3DA);
|
|
i740outb(par, 0x3C0, 0x00);
|
|
|
|
/* update misc output register */
|
|
i740outb(par, VGA_MIS_W, par->misc | 0x01);
|
|
|
|
/* synchronous reset on */
|
|
i740outreg(par, VGA_SEQ_I, VGA_SEQ_RESET, 0x01);
|
|
/* write sequencer registers */
|
|
i740outreg(par, VGA_SEQ_I, VGA_SEQ_CLOCK_MODE,
|
|
par->seq[VGA_SEQ_CLOCK_MODE] | 0x20);
|
|
for (i = 2; i < VGA_SEQ_C; i++)
|
|
i740outreg(par, VGA_SEQ_I, i, par->seq[i]);
|
|
|
|
/* synchronous reset off */
|
|
i740outreg(par, VGA_SEQ_I, VGA_SEQ_RESET, 0x03);
|
|
|
|
/* deprotect CRT registers 0-7 */
|
|
i740outreg(par, VGA_CRT_IC, VGA_CRTC_V_SYNC_END,
|
|
par->crtc[VGA_CRTC_V_SYNC_END]);
|
|
|
|
/* write CRT registers */
|
|
for (i = 0; i < VGA_CRT_C; i++)
|
|
i740outreg(par, VGA_CRT_IC, i, par->crtc[i]);
|
|
|
|
/* write graphics controller registers */
|
|
for (i = 0; i < VGA_GFX_C; i++)
|
|
i740outreg(par, VGA_GFX_I, i, par->gdc[i]);
|
|
|
|
/* write attribute controller registers */
|
|
for (i = 0; i < VGA_ATT_C; i++) {
|
|
i740inb(par, VGA_IS1_RC); /* reset flip-flop */
|
|
i740outb(par, VGA_ATT_IW, i);
|
|
i740outb(par, VGA_ATT_IW, par->atc[i]);
|
|
}
|
|
|
|
i740inb(par, VGA_IS1_RC);
|
|
i740outb(par, VGA_ATT_IW, 0x20);
|
|
|
|
i740outreg(par, VGA_CRT_IC, EXT_VERT_TOTAL, par->ext_vert_total);
|
|
i740outreg(par, VGA_CRT_IC, EXT_VERT_DISPLAY, par->ext_vert_disp_end);
|
|
i740outreg(par, VGA_CRT_IC, EXT_VERT_SYNC_START,
|
|
par->ext_vert_sync_start);
|
|
i740outreg(par, VGA_CRT_IC, EXT_VERT_BLANK_START,
|
|
par->ext_vert_blank_start);
|
|
i740outreg(par, VGA_CRT_IC, EXT_HORIZ_TOTAL, par->ext_horiz_total);
|
|
i740outreg(par, VGA_CRT_IC, EXT_HORIZ_BLANK, par->ext_horiz_blank);
|
|
i740outreg(par, VGA_CRT_IC, EXT_OFFSET, par->ext_offset);
|
|
i740outreg(par, VGA_CRT_IC, EXT_START_ADDR_HI, par->ext_start_addr_hi);
|
|
i740outreg(par, VGA_CRT_IC, EXT_START_ADDR, par->ext_start_addr);
|
|
|
|
i740outreg_mask(par, VGA_CRT_IC, INTERLACE_CNTL,
|
|
par->interlace_cntl, INTERLACE_ENABLE);
|
|
i740outreg_mask(par, XRX, ADDRESS_MAPPING, par->address_mapping, 0x1F);
|
|
i740outreg_mask(par, XRX, BITBLT_CNTL, par->bitblt_cntl, COLEXP_MODE);
|
|
i740outreg_mask(par, XRX, DISPLAY_CNTL,
|
|
par->display_cntl, VGA_WRAP_MODE | GUI_MODE);
|
|
i740outreg_mask(par, XRX, PIXPIPE_CONFIG_0, par->pixelpipe_cfg0, 0x9B);
|
|
i740outreg_mask(par, XRX, PIXPIPE_CONFIG_2, par->pixelpipe_cfg2, 0x0C);
|
|
|
|
i740outreg(par, XRX, PLL_CNTL, par->pll_cntl);
|
|
|
|
i740outreg_mask(par, XRX, PIXPIPE_CONFIG_1,
|
|
par->pixelpipe_cfg1, DISPLAY_COLOR_MODE);
|
|
|
|
itemp = readl(par->regs + FWATER_BLC);
|
|
itemp &= ~(LMI_BURST_LENGTH | LMI_FIFO_WATERMARK);
|
|
itemp |= par->lmi_fifo_watermark;
|
|
writel(itemp, par->regs + FWATER_BLC);
|
|
|
|
i740outreg(par, XRX, DRAM_EXT_CNTL, DRAM_REFRESH_60HZ);
|
|
|
|
i740outreg_mask(par, MRX, COL_KEY_CNTL_1, 0, BLANK_DISP_OVERLAY);
|
|
i740outreg_mask(par, XRX, IO_CTNL,
|
|
par->io_cntl, EXTENDED_ATTR_CNTL | EXTENDED_CRTC_CNTL);
|
|
|
|
if (par->pixelpipe_cfg1 != DISPLAY_8BPP_MODE) {
|
|
i740outb(par, VGA_PEL_MSK, 0xFF);
|
|
i740outb(par, VGA_PEL_IW, 0x00);
|
|
for (i = 0; i < 256; i++) {
|
|
itemp = (par->pixelpipe_cfg0 & DAC_8_BIT) ? i : i >> 2;
|
|
i740outb(par, VGA_PEL_D, itemp);
|
|
i740outb(par, VGA_PEL_D, itemp);
|
|
i740outb(par, VGA_PEL_D, itemp);
|
|
}
|
|
}
|
|
|
|
/* Wait for screen to stabilize. */
|
|
mdelay(50);
|
|
vga_unprotect(par);
|
|
|
|
info->fix.line_length =
|
|
info->var.xres_virtual * info->var.bits_per_pixel / 8;
|
|
if (info->var.bits_per_pixel == 8)
|
|
info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
|
|
else
|
|
info->fix.visual = FB_VISUAL_TRUECOLOR;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i740fb_setcolreg(unsigned regno, unsigned red, unsigned green,
|
|
unsigned blue, unsigned transp,
|
|
struct fb_info *info)
|
|
{
|
|
u32 r, g, b;
|
|
|
|
dev_dbg(info->device, "setcolreg: regno: %i, red=%d, green=%d, blue=%d, transp=%d, bpp=%d\n",
|
|
regno, red, green, blue, transp, info->var.bits_per_pixel);
|
|
|
|
switch (info->fix.visual) {
|
|
case FB_VISUAL_PSEUDOCOLOR:
|
|
if (regno >= 256)
|
|
return -EINVAL;
|
|
i740outb(info->par, VGA_PEL_IW, regno);
|
|
i740outb(info->par, VGA_PEL_D, red >> 8);
|
|
i740outb(info->par, VGA_PEL_D, green >> 8);
|
|
i740outb(info->par, VGA_PEL_D, blue >> 8);
|
|
break;
|
|
case FB_VISUAL_TRUECOLOR:
|
|
if (regno >= 16)
|
|
return -EINVAL;
|
|
r = (red >> (16 - info->var.red.length))
|
|
<< info->var.red.offset;
|
|
b = (blue >> (16 - info->var.blue.length))
|
|
<< info->var.blue.offset;
|
|
g = (green >> (16 - info->var.green.length))
|
|
<< info->var.green.offset;
|
|
((u32 *) info->pseudo_palette)[regno] = r | g | b;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i740fb_pan_display(struct fb_var_screeninfo *var,
|
|
struct fb_info *info)
|
|
{
|
|
struct i740fb_par *par = info->par;
|
|
u32 base = (var->yoffset * info->var.xres_virtual
|
|
+ (var->xoffset & ~7)) >> 2;
|
|
|
|
dev_dbg(info->device, "pan_display: xoffset: %i yoffset: %i base: %i\n",
|
|
var->xoffset, var->yoffset, base);
|
|
|
|
switch (info->var.bits_per_pixel) {
|
|
case 8:
|
|
break;
|
|
case 15:
|
|
case 16:
|
|
base *= 2;
|
|
break;
|
|
case 24:
|
|
/*
|
|
* The last bit does not seem to have any effect on the start
|
|
* address register in 24bpp mode, so...
|
|
*/
|
|
base &= 0xFFFFFFFE; /* ...ignore the last bit. */
|
|
base *= 3;
|
|
break;
|
|
case 32:
|
|
base *= 4;
|
|
break;
|
|
}
|
|
|
|
par->crtc[VGA_CRTC_START_LO] = base & 0x000000FF;
|
|
par->crtc[VGA_CRTC_START_HI] = (base & 0x0000FF00) >> 8;
|
|
par->ext_start_addr_hi = (base & 0x3FC00000) >> 22;
|
|
par->ext_start_addr =
|
|
((base & 0x003F0000) >> 16) | EXT_START_ADDR_ENABLE;
|
|
|
|
i740outreg(par, VGA_CRT_IC, VGA_CRTC_START_LO, base & 0x000000FF);
|
|
i740outreg(par, VGA_CRT_IC, VGA_CRTC_START_HI,
|
|
(base & 0x0000FF00) >> 8);
|
|
i740outreg(par, VGA_CRT_IC, EXT_START_ADDR_HI,
|
|
(base & 0x3FC00000) >> 22);
|
|
i740outreg(par, VGA_CRT_IC, EXT_START_ADDR,
|
|
((base & 0x003F0000) >> 16) | EXT_START_ADDR_ENABLE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i740fb_blank(int blank_mode, struct fb_info *info)
|
|
{
|
|
struct i740fb_par *par = info->par;
|
|
|
|
unsigned char SEQ01;
|
|
int DPMSSyncSelect;
|
|
|
|
switch (blank_mode) {
|
|
case FB_BLANK_UNBLANK:
|
|
case FB_BLANK_NORMAL:
|
|
SEQ01 = 0x00;
|
|
DPMSSyncSelect = HSYNC_ON | VSYNC_ON;
|
|
break;
|
|
case FB_BLANK_VSYNC_SUSPEND:
|
|
SEQ01 = 0x20;
|
|
DPMSSyncSelect = HSYNC_ON | VSYNC_OFF;
|
|
break;
|
|
case FB_BLANK_HSYNC_SUSPEND:
|
|
SEQ01 = 0x20;
|
|
DPMSSyncSelect = HSYNC_OFF | VSYNC_ON;
|
|
break;
|
|
case FB_BLANK_POWERDOWN:
|
|
SEQ01 = 0x20;
|
|
DPMSSyncSelect = HSYNC_OFF | VSYNC_OFF;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
/* Turn the screen on/off */
|
|
i740outb(par, SRX, 0x01);
|
|
SEQ01 |= i740inb(par, SRX + 1) & ~0x20;
|
|
i740outb(par, SRX, 0x01);
|
|
i740outb(par, SRX + 1, SEQ01);
|
|
|
|
/* Set the DPMS mode */
|
|
i740outreg(par, XRX, DPMS_SYNC_SELECT, DPMSSyncSelect);
|
|
|
|
/* Let fbcon do a soft blank for us */
|
|
return (blank_mode == FB_BLANK_NORMAL) ? 1 : 0;
|
|
}
|
|
|
|
static struct fb_ops i740fb_ops = {
|
|
.owner = THIS_MODULE,
|
|
.fb_open = i740fb_open,
|
|
.fb_release = i740fb_release,
|
|
.fb_check_var = i740fb_check_var,
|
|
.fb_set_par = i740fb_set_par,
|
|
.fb_setcolreg = i740fb_setcolreg,
|
|
.fb_blank = i740fb_blank,
|
|
.fb_pan_display = i740fb_pan_display,
|
|
.fb_fillrect = cfb_fillrect,
|
|
.fb_copyarea = cfb_copyarea,
|
|
.fb_imageblit = cfb_imageblit,
|
|
};
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static int i740fb_probe(struct pci_dev *dev, const struct pci_device_id *ent)
|
|
{
|
|
struct fb_info *info;
|
|
struct i740fb_par *par;
|
|
int ret, tmp;
|
|
bool found = false;
|
|
u8 *edid;
|
|
|
|
info = framebuffer_alloc(sizeof(struct i740fb_par), &(dev->dev));
|
|
if (!info)
|
|
return -ENOMEM;
|
|
|
|
par = info->par;
|
|
mutex_init(&par->open_lock);
|
|
|
|
info->var.activate = FB_ACTIVATE_NOW;
|
|
info->var.bits_per_pixel = 8;
|
|
info->fbops = &i740fb_ops;
|
|
info->pseudo_palette = par->pseudo_palette;
|
|
|
|
ret = pci_enable_device(dev);
|
|
if (ret) {
|
|
dev_err(info->device, "cannot enable PCI device\n");
|
|
goto err_enable_device;
|
|
}
|
|
|
|
ret = pci_request_regions(dev, info->fix.id);
|
|
if (ret) {
|
|
dev_err(info->device, "error requesting regions\n");
|
|
goto err_request_regions;
|
|
}
|
|
|
|
info->screen_base = pci_ioremap_wc_bar(dev, 0);
|
|
if (!info->screen_base) {
|
|
dev_err(info->device, "error remapping base\n");
|
|
ret = -ENOMEM;
|
|
goto err_ioremap_1;
|
|
}
|
|
|
|
par->regs = pci_ioremap_bar(dev, 1);
|
|
if (!par->regs) {
|
|
dev_err(info->device, "error remapping MMIO\n");
|
|
ret = -ENOMEM;
|
|
goto err_ioremap_2;
|
|
}
|
|
|
|
/* detect memory size */
|
|
if ((i740inreg(par, XRX, DRAM_ROW_TYPE) & DRAM_ROW_1)
|
|
== DRAM_ROW_1_SDRAM)
|
|
i740outb(par, XRX, DRAM_ROW_BNDRY_1);
|
|
else
|
|
i740outb(par, XRX, DRAM_ROW_BNDRY_0);
|
|
info->screen_size = i740inb(par, XRX + 1) * 1024 * 1024;
|
|
/* detect memory type */
|
|
tmp = i740inreg(par, XRX, DRAM_ROW_CNTL_LO);
|
|
par->has_sgram = !((tmp & DRAM_RAS_TIMING) ||
|
|
(tmp & DRAM_RAS_PRECHARGE));
|
|
|
|
fb_info(info, "Intel740 on %s, %ld KB %s\n",
|
|
pci_name(dev), info->screen_size >> 10,
|
|
par->has_sgram ? "SGRAM" : "SDRAM");
|
|
|
|
info->fix = i740fb_fix;
|
|
info->fix.mmio_start = pci_resource_start(dev, 1);
|
|
info->fix.mmio_len = pci_resource_len(dev, 1);
|
|
info->fix.smem_start = pci_resource_start(dev, 0);
|
|
info->fix.smem_len = info->screen_size;
|
|
info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
|
|
|
|
if (i740fb_setup_ddc_bus(info) == 0) {
|
|
par->ddc_registered = true;
|
|
edid = fb_ddc_read(&par->ddc_adapter);
|
|
if (edid) {
|
|
fb_edid_to_monspecs(edid, &info->monspecs);
|
|
kfree(edid);
|
|
if (!info->monspecs.modedb)
|
|
dev_err(info->device,
|
|
"error getting mode database\n");
|
|
else {
|
|
const struct fb_videomode *m;
|
|
|
|
fb_videomode_to_modelist(
|
|
info->monspecs.modedb,
|
|
info->monspecs.modedb_len,
|
|
&info->modelist);
|
|
m = fb_find_best_display(&info->monspecs,
|
|
&info->modelist);
|
|
if (m) {
|
|
fb_videomode_to_var(&info->var, m);
|
|
/* fill all other info->var's fields */
|
|
if (!i740fb_check_var(&info->var, info))
|
|
found = true;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if (!mode_option && !found)
|
|
mode_option = "640x480-8@60";
|
|
|
|
if (mode_option) {
|
|
ret = fb_find_mode(&info->var, info, mode_option,
|
|
info->monspecs.modedb,
|
|
info->monspecs.modedb_len,
|
|
NULL, info->var.bits_per_pixel);
|
|
if (!ret || ret == 4) {
|
|
dev_err(info->device, "mode %s not found\n",
|
|
mode_option);
|
|
ret = -EINVAL;
|
|
}
|
|
}
|
|
|
|
fb_destroy_modedb(info->monspecs.modedb);
|
|
info->monspecs.modedb = NULL;
|
|
|
|
/* maximize virtual vertical size for fast scrolling */
|
|
info->var.yres_virtual = info->fix.smem_len * 8 /
|
|
(info->var.bits_per_pixel * info->var.xres_virtual);
|
|
|
|
if (ret == -EINVAL)
|
|
goto err_find_mode;
|
|
|
|
ret = fb_alloc_cmap(&info->cmap, 256, 0);
|
|
if (ret) {
|
|
dev_err(info->device, "cannot allocate colormap\n");
|
|
goto err_alloc_cmap;
|
|
}
|
|
|
|
ret = register_framebuffer(info);
|
|
if (ret) {
|
|
dev_err(info->device, "error registering framebuffer\n");
|
|
goto err_reg_framebuffer;
|
|
}
|
|
|
|
fb_info(info, "%s frame buffer device\n", info->fix.id);
|
|
pci_set_drvdata(dev, info);
|
|
if (mtrr)
|
|
par->wc_cookie = arch_phys_wc_add(info->fix.smem_start,
|
|
info->fix.smem_len);
|
|
return 0;
|
|
|
|
err_reg_framebuffer:
|
|
fb_dealloc_cmap(&info->cmap);
|
|
err_alloc_cmap:
|
|
err_find_mode:
|
|
if (par->ddc_registered)
|
|
i2c_del_adapter(&par->ddc_adapter);
|
|
pci_iounmap(dev, par->regs);
|
|
err_ioremap_2:
|
|
pci_iounmap(dev, info->screen_base);
|
|
err_ioremap_1:
|
|
pci_release_regions(dev);
|
|
err_request_regions:
|
|
/* pci_disable_device(dev); */
|
|
err_enable_device:
|
|
framebuffer_release(info);
|
|
return ret;
|
|
}
|
|
|
|
static void i740fb_remove(struct pci_dev *dev)
|
|
{
|
|
struct fb_info *info = pci_get_drvdata(dev);
|
|
|
|
if (info) {
|
|
struct i740fb_par *par = info->par;
|
|
arch_phys_wc_del(par->wc_cookie);
|
|
unregister_framebuffer(info);
|
|
fb_dealloc_cmap(&info->cmap);
|
|
if (par->ddc_registered)
|
|
i2c_del_adapter(&par->ddc_adapter);
|
|
pci_iounmap(dev, par->regs);
|
|
pci_iounmap(dev, info->screen_base);
|
|
pci_release_regions(dev);
|
|
/* pci_disable_device(dev); */
|
|
framebuffer_release(info);
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int i740fb_suspend(struct pci_dev *dev, pm_message_t state)
|
|
{
|
|
struct fb_info *info = pci_get_drvdata(dev);
|
|
struct i740fb_par *par = info->par;
|
|
|
|
/* don't disable console during hibernation and wakeup from it */
|
|
if (state.event == PM_EVENT_FREEZE || state.event == PM_EVENT_PRETHAW)
|
|
return 0;
|
|
|
|
console_lock();
|
|
mutex_lock(&(par->open_lock));
|
|
|
|
/* do nothing if framebuffer is not active */
|
|
if (par->ref_count == 0) {
|
|
mutex_unlock(&(par->open_lock));
|
|
console_unlock();
|
|
return 0;
|
|
}
|
|
|
|
fb_set_suspend(info, 1);
|
|
|
|
pci_save_state(dev);
|
|
pci_disable_device(dev);
|
|
pci_set_power_state(dev, pci_choose_state(dev, state));
|
|
|
|
mutex_unlock(&(par->open_lock));
|
|
console_unlock();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i740fb_resume(struct pci_dev *dev)
|
|
{
|
|
struct fb_info *info = pci_get_drvdata(dev);
|
|
struct i740fb_par *par = info->par;
|
|
|
|
console_lock();
|
|
mutex_lock(&(par->open_lock));
|
|
|
|
if (par->ref_count == 0)
|
|
goto fail;
|
|
|
|
pci_set_power_state(dev, PCI_D0);
|
|
pci_restore_state(dev);
|
|
if (pci_enable_device(dev))
|
|
goto fail;
|
|
|
|
i740fb_set_par(info);
|
|
fb_set_suspend(info, 0);
|
|
|
|
fail:
|
|
mutex_unlock(&(par->open_lock));
|
|
console_unlock();
|
|
return 0;
|
|
}
|
|
#else
|
|
#define i740fb_suspend NULL
|
|
#define i740fb_resume NULL
|
|
#endif /* CONFIG_PM */
|
|
|
|
#define I740_ID_PCI 0x00d1
|
|
#define I740_ID_AGP 0x7800
|
|
|
|
static const struct pci_device_id i740fb_id_table[] = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, I740_ID_PCI) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, I740_ID_AGP) },
|
|
{ 0 }
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, i740fb_id_table);
|
|
|
|
static struct pci_driver i740fb_driver = {
|
|
.name = "i740fb",
|
|
.id_table = i740fb_id_table,
|
|
.probe = i740fb_probe,
|
|
.remove = i740fb_remove,
|
|
.suspend = i740fb_suspend,
|
|
.resume = i740fb_resume,
|
|
};
|
|
|
|
#ifndef MODULE
|
|
static int __init i740fb_setup(char *options)
|
|
{
|
|
char *opt;
|
|
|
|
if (!options || !*options)
|
|
return 0;
|
|
|
|
while ((opt = strsep(&options, ",")) != NULL) {
|
|
if (!*opt)
|
|
continue;
|
|
else if (!strncmp(opt, "mtrr:", 5))
|
|
mtrr = simple_strtoul(opt + 5, NULL, 0);
|
|
else
|
|
mode_option = opt;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int __init i740fb_init(void)
|
|
{
|
|
#ifndef MODULE
|
|
char *option = NULL;
|
|
|
|
if (fb_get_options("i740fb", &option))
|
|
return -ENODEV;
|
|
i740fb_setup(option);
|
|
#endif
|
|
|
|
return pci_register_driver(&i740fb_driver);
|
|
}
|
|
|
|
static void __exit i740fb_exit(void)
|
|
{
|
|
pci_unregister_driver(&i740fb_driver);
|
|
}
|
|
|
|
module_init(i740fb_init);
|
|
module_exit(i740fb_exit);
|
|
|
|
MODULE_AUTHOR("(c) 2011 Ondrej Zary <linux@rainbow-software.org>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("fbdev driver for Intel740");
|
|
|
|
module_param(mode_option, charp, 0444);
|
|
MODULE_PARM_DESC(mode_option, "Default video mode ('640x480-8@60', etc)");
|
|
|
|
module_param(mtrr, int, 0444);
|
|
MODULE_PARM_DESC(mtrr, "Enable write-combining with MTRR (1=enable, 0=disable, default=1)");
|