hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
linux-sg2042/drivers/ide/pci/sis5513.c

990 lines
28 KiB
C
Raw Blame History

/*
* linux/drivers/ide/pci/sis5513.c Version 0.16ac+vp Jun 18, 2003
*
* Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2002 Lionel Bouton <Lionel.Bouton@inet6.fr>, Maintainer
* Copyright (C) 2003 Vojtech Pavlik <vojtech@suse.cz>
* May be copied or modified under the terms of the GNU General Public License
*
*
* Thanks :
*
* SiS Taiwan : for direct support and hardware.
* Daniela Engert : for initial ATA100 advices and numerous others.
* John Fremlin, Manfred Spraul, Dave Morgan, Peter Kjellerstedt :
* for checking code correctness, providing patches.
*
*
* Original tests and design on the SiS620 chipset.
* ATA100 tests and design on the SiS735 chipset.
* ATA16/33 support from specs
* ATA133 support for SiS961/962 by L.C. Chang <lcchang@sis.com.tw>
* ATA133 961/962/963 fixes by Vojtech Pavlik <vojtech@suse.cz>
*
* Documentation:
* SiS chipset documentation available under NDA to companies only
* (not to individuals).
*/
/*
* The original SiS5513 comes from a SiS5511/55112/5513 chipset. The original
* SiS5513 was also used in the SiS5596/5513 chipset. Thus if we see a SiS5511
* or SiS5596, we can assume we see the first MWDMA-16 capable SiS5513 chip.
*
* Later SiS chipsets integrated the 5513 functionality into the NorthBridge,
* starting with SiS5571 and up to SiS745. The PCI ID didn't change, though. We
* can figure out that we have a more modern and more capable 5513 by looking
* for the respective NorthBridge IDs.
*
* Even later (96x family) SiS chipsets use the MuTIOL link and place the 5513
* into the SouthBrige. Here we cannot rely on looking up the NorthBridge PCI
* ID, while the now ATA-133 capable 5513 still has the same PCI ID.
* Fortunately the 5513 can be 'unmasked' by fiddling with some config space
* bits, changing its device id to the true one - 5517 for 961 and 5518 for
* 962/963.
*/
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/ioport.h>
#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ide.h>
#include <asm/irq.h>
#include "ide-timing.h"
#define DISPLAY_SIS_TIMINGS
/* registers layout and init values are chipset family dependant */
#define ATA_16 0x01
#define ATA_33 0x02
#define ATA_66 0x03
#define ATA_100a 0x04 // SiS730/SiS550 is ATA100 with ATA66 layout
#define ATA_100 0x05
#define ATA_133a 0x06 // SiS961b with 133 support
#define ATA_133 0x07 // SiS962/963
static u8 chipset_family;
/*
* Devices supported
*/
static const struct {
const char *name;
u16 host_id;
u8 chipset_family;
u8 flags;
} SiSHostChipInfo[] = {
{ "SiS968", PCI_DEVICE_ID_SI_968, ATA_133 },
{ "SiS966", PCI_DEVICE_ID_SI_966, ATA_133 },
{ "SiS965", PCI_DEVICE_ID_SI_965, ATA_133 },
{ "SiS745", PCI_DEVICE_ID_SI_745, ATA_100 },
{ "SiS735", PCI_DEVICE_ID_SI_735, ATA_100 },
{ "SiS733", PCI_DEVICE_ID_SI_733, ATA_100 },
{ "SiS635", PCI_DEVICE_ID_SI_635, ATA_100 },
{ "SiS633", PCI_DEVICE_ID_SI_633, ATA_100 },
{ "SiS730", PCI_DEVICE_ID_SI_730, ATA_100a },
{ "SiS550", PCI_DEVICE_ID_SI_550, ATA_100a },
{ "SiS640", PCI_DEVICE_ID_SI_640, ATA_66 },
{ "SiS630", PCI_DEVICE_ID_SI_630, ATA_66 },
{ "SiS620", PCI_DEVICE_ID_SI_620, ATA_66 },
{ "SiS540", PCI_DEVICE_ID_SI_540, ATA_66 },
{ "SiS530", PCI_DEVICE_ID_SI_530, ATA_66 },
{ "SiS5600", PCI_DEVICE_ID_SI_5600, ATA_33 },
{ "SiS5598", PCI_DEVICE_ID_SI_5598, ATA_33 },
{ "SiS5597", PCI_DEVICE_ID_SI_5597, ATA_33 },
{ "SiS5591/2", PCI_DEVICE_ID_SI_5591, ATA_33 },
{ "SiS5582", PCI_DEVICE_ID_SI_5582, ATA_33 },
{ "SiS5581", PCI_DEVICE_ID_SI_5581, ATA_33 },
{ "SiS5596", PCI_DEVICE_ID_SI_5596, ATA_16 },
{ "SiS5571", PCI_DEVICE_ID_SI_5571, ATA_16 },
{ "SiS5517", PCI_DEVICE_ID_SI_5517, ATA_16 },
{ "SiS551x", PCI_DEVICE_ID_SI_5511, ATA_16 },
};
/* Cycle time bits and values vary across chip dma capabilities
These three arrays hold the register layout and the values to set.
Indexed by chipset_family and (dma_mode - XFER_UDMA_0) */
/* {0, ATA_16, ATA_33, ATA_66, ATA_100a, ATA_100, ATA_133} */
static u8 cycle_time_offset[] = {0,0,5,4,4,0,0};
static u8 cycle_time_range[] = {0,0,2,3,3,4,4};
static u8 cycle_time_value[][XFER_UDMA_6 - XFER_UDMA_0 + 1] = {
{0,0,0,0,0,0,0}, /* no udma */
{0,0,0,0,0,0,0}, /* no udma */
{3,2,1,0,0,0,0}, /* ATA_33 */
{7,5,3,2,1,0,0}, /* ATA_66 */
{7,5,3,2,1,0,0}, /* ATA_100a (730 specific), differences are on cycle_time range and offset */
{11,7,5,4,2,1,0}, /* ATA_100 */
{15,10,7,5,3,2,1}, /* ATA_133a (earliest 691 southbridges) */
{15,10,7,5,3,2,1}, /* ATA_133 */
};
/* CRC Valid Setup Time vary across IDE clock setting 33/66/100/133
See SiS962 data sheet for more detail */
static u8 cvs_time_value[][XFER_UDMA_6 - XFER_UDMA_0 + 1] = {
{0,0,0,0,0,0,0}, /* no udma */
{0,0,0,0,0,0,0}, /* no udma */
{2,1,1,0,0,0,0},
{4,3,2,1,0,0,0},
{4,3,2,1,0,0,0},
{6,4,3,1,1,1,0},
{9,6,4,2,2,2,2},
{9,6,4,2,2,2,2},
};
/* Initialize time, Active time, Recovery time vary across
IDE clock settings. These 3 arrays hold the register value
for PIO0/1/2/3/4 and DMA0/1/2 mode in order */
static u8 ini_time_value[][8] = {
{0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0},
{2,1,0,0,0,1,0,0},
{4,3,1,1,1,3,1,1},
{4,3,1,1,1,3,1,1},
{6,4,2,2,2,4,2,2},
{9,6,3,3,3,6,3,3},
{9,6,3,3,3,6,3,3},
};
static u8 act_time_value[][8] = {
{0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0},
{9,9,9,2,2,7,2,2},
{19,19,19,5,4,14,5,4},
{19,19,19,5,4,14,5,4},
{28,28,28,7,6,21,7,6},
{38,38,38,10,9,28,10,9},
{38,38,38,10,9,28,10,9},
};
static u8 rco_time_value[][8] = {
{0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0},
{9,2,0,2,0,7,1,1},
{19,5,1,5,2,16,3,2},
{19,5,1,5,2,16,3,2},
{30,9,3,9,4,25,6,4},
{40,12,4,12,5,34,12,5},
{40,12,4,12,5,34,12,5},
};
/*
* Printing configuration
*/
/* Used for chipset type printing at boot time */
static char* chipset_capability[] = {
"ATA", "ATA 16",
"ATA 33", "ATA 66",
"ATA 100 (1st gen)", "ATA 100 (2nd gen)",
"ATA 133 (1st gen)", "ATA 133 (2nd gen)"
};
#if defined(DISPLAY_SIS_TIMINGS) && defined(CONFIG_PROC_FS)
#include <linux/stat.h>
#include <linux/proc_fs.h>
static u8 sis_proc = 0;
static struct pci_dev *bmide_dev;
static char* cable_type[] = {
"80 pins",
"40 pins"
};
static char* recovery_time[] ={
"12 PCICLK", "1 PCICLK",
"2 PCICLK", "3 PCICLK",
"4 PCICLK", "5 PCICLCK",
"6 PCICLK", "7 PCICLCK",
"8 PCICLK", "9 PCICLCK",
"10 PCICLK", "11 PCICLK",
"13 PCICLK", "14 PCICLK",
"15 PCICLK", "15 PCICLK"
};
static char* active_time[] = {
"8 PCICLK", "1 PCICLCK",
"2 PCICLK", "3 PCICLK",
"4 PCICLK", "5 PCICLK",
"6 PCICLK", "12 PCICLK"
};
static char* cycle_time[] = {
"Reserved", "2 CLK",
"3 CLK", "4 CLK",
"5 CLK", "6 CLK",
"7 CLK", "8 CLK",
"9 CLK", "10 CLK",
"11 CLK", "12 CLK",
"13 CLK", "14 CLK",
"15 CLK", "16 CLK"
};
/* Generic add master or slave info function */
static char* get_drives_info (char *buffer, u8 pos)
{
u8 reg00, reg01, reg10, reg11; /* timing registers */
u32 regdw0, regdw1;
char* p = buffer;
/* Postwrite/Prefetch */
if (chipset_family < ATA_133) {
pci_read_config_byte(bmide_dev, 0x4b, &reg00);
p += sprintf(p, "Drive %d: Postwrite %s \t \t Postwrite %s\n",
pos, (reg00 & (0x10 << pos)) ? "Enabled" : "Disabled",
(reg00 & (0x40 << pos)) ? "Enabled" : "Disabled");
p += sprintf(p, " Prefetch %s \t \t Prefetch %s\n",
(reg00 & (0x01 << pos)) ? "Enabled" : "Disabled",
(reg00 & (0x04 << pos)) ? "Enabled" : "Disabled");
pci_read_config_byte(bmide_dev, 0x40+2*pos, &reg00);
pci_read_config_byte(bmide_dev, 0x41+2*pos, &reg01);
pci_read_config_byte(bmide_dev, 0x44+2*pos, &reg10);
pci_read_config_byte(bmide_dev, 0x45+2*pos, &reg11);
} else {
u32 reg54h;
u8 drive_pci = 0x40;
pci_read_config_dword(bmide_dev, 0x54, &reg54h);
if (reg54h & 0x40000000) {
// Configuration space remapped to 0x70
drive_pci = 0x70;
}
pci_read_config_dword(bmide_dev, (unsigned long)drive_pci+4*pos, &regdw0);
pci_read_config_dword(bmide_dev, (unsigned long)drive_pci+4*pos+8, &regdw1);
p += sprintf(p, "Drive %d:\n", pos);
}
/* UDMA */
if (chipset_family >= ATA_133) {
p += sprintf(p, " UDMA %s \t \t \t UDMA %s\n",
(regdw0 & 0x04) ? "Enabled" : "Disabled",
(regdw1 & 0x04) ? "Enabled" : "Disabled");
p += sprintf(p, " UDMA Cycle Time %s \t UDMA Cycle Time %s\n",
cycle_time[(regdw0 & 0xF0) >> 4],
cycle_time[(regdw1 & 0xF0) >> 4]);
} else if (chipset_family >= ATA_33) {
p += sprintf(p, " UDMA %s \t \t \t UDMA %s\n",
(reg01 & 0x80) ? "Enabled" : "Disabled",
(reg11 & 0x80) ? "Enabled" : "Disabled");
p += sprintf(p, " UDMA Cycle Time ");
switch(chipset_family) {
case ATA_33: p += sprintf(p, cycle_time[(reg01 & 0x60) >> 5]); break;
case ATA_66:
case ATA_100a: p += sprintf(p, cycle_time[(reg01 & 0x70) >> 4]); break;
case ATA_100:
case ATA_133a: p += sprintf(p, cycle_time[reg01 & 0x0F]); break;
default: p += sprintf(p, "?"); break;
}
p += sprintf(p, " \t UDMA Cycle Time ");
switch(chipset_family) {
case ATA_33: p += sprintf(p, cycle_time[(reg11 & 0x60) >> 5]); break;
case ATA_66:
case ATA_100a: p += sprintf(p, cycle_time[(reg11 & 0x70) >> 4]); break;
case ATA_100:
case ATA_133a: p += sprintf(p, cycle_time[reg11 & 0x0F]); break;
default: p += sprintf(p, "?"); break;
}
p += sprintf(p, "\n");
}
if (chipset_family < ATA_133) { /* else case TODO */
/* Data Active */
p += sprintf(p, " Data Active Time ");
switch(chipset_family) {
case ATA_16: /* confirmed */
case ATA_33:
case ATA_66:
case ATA_100a: p += sprintf(p, active_time[reg01 & 0x07]); break;
case ATA_100:
case ATA_133a: p += sprintf(p, active_time[(reg00 & 0x70) >> 4]); break;
default: p += sprintf(p, "?"); break;
}
p += sprintf(p, " \t Data Active Time ");
switch(chipset_family) {
case ATA_16:
case ATA_33:
case ATA_66:
case ATA_100a: p += sprintf(p, active_time[reg11 & 0x07]); break;
case ATA_100:
case ATA_133a: p += sprintf(p, active_time[(reg10 & 0x70) >> 4]); break;
default: p += sprintf(p, "?"); break;
}
p += sprintf(p, "\n");
/* Data Recovery */
/* warning: may need (reg&0x07) for pre ATA66 chips */
p += sprintf(p, " Data Recovery Time %s \t Data Recovery Time %s\n",
recovery_time[reg00 & 0x0f], recovery_time[reg10 & 0x0f]);
}
return p;
}
static char* get_masters_info(char* buffer)
{
return get_drives_info(buffer, 0);
}
static char* get_slaves_info(char* buffer)
{
return get_drives_info(buffer, 1);
}
/* Main get_info, called on /proc/ide/sis reads */
static int sis_get_info (char *buffer, char **addr, off_t offset, int count)
{
char *p = buffer;
int len;
u8 reg;
u16 reg2, reg3;
p += sprintf(p, "\nSiS 5513 ");
switch(chipset_family) {
case ATA_16: p += sprintf(p, "DMA 16"); break;
case ATA_33: p += sprintf(p, "Ultra 33"); break;
case ATA_66: p += sprintf(p, "Ultra 66"); break;
case ATA_100a:
case ATA_100: p += sprintf(p, "Ultra 100"); break;
case ATA_133a:
case ATA_133: p += sprintf(p, "Ultra 133"); break;
default: p+= sprintf(p, "Unknown???"); break;
}
p += sprintf(p, " chipset\n");
p += sprintf(p, "--------------- Primary Channel "
"---------------- Secondary Channel "
"-------------\n");
/* Status */
pci_read_config_byte(bmide_dev, 0x4a, &reg);
if (chipset_family == ATA_133) {
pci_read_config_word(bmide_dev, 0x50, &reg2);
pci_read_config_word(bmide_dev, 0x52, &reg3);
}
p += sprintf(p, "Channel Status: ");
if (chipset_family < ATA_66) {
p += sprintf(p, "%s \t \t \t \t %s\n",
(reg & 0x04) ? "On" : "Off",
(reg & 0x02) ? "On" : "Off");
} else if (chipset_family < ATA_133) {
p += sprintf(p, "%s \t \t \t \t %s \n",
(reg & 0x02) ? "On" : "Off",
(reg & 0x04) ? "On" : "Off");
} else { /* ATA_133 */
p += sprintf(p, "%s \t \t \t \t %s \n",
(reg2 & 0x02) ? "On" : "Off",
(reg3 & 0x02) ? "On" : "Off");
}
/* Operation Mode */
pci_read_config_byte(bmide_dev, 0x09, &reg);
p += sprintf(p, "Operation Mode: %s \t \t \t %s \n",
(reg & 0x01) ? "Native" : "Compatible",
(reg & 0x04) ? "Native" : "Compatible");
/* 80-pin cable ? */
if (chipset_family >= ATA_133) {
p += sprintf(p, "Cable Type: %s \t \t \t %s\n",
(reg2 & 0x01) ? cable_type[1] : cable_type[0],
(reg3 & 0x01) ? cable_type[1] : cable_type[0]);
} else if (chipset_family > ATA_33) {
pci_read_config_byte(bmide_dev, 0x48, &reg);
p += sprintf(p, "Cable Type: %s \t \t \t %s\n",
(reg & 0x10) ? cable_type[1] : cable_type[0],
(reg & 0x20) ? cable_type[1] : cable_type[0]);
}
/* Prefetch Count */
if (chipset_family < ATA_133) {
pci_read_config_word(bmide_dev, 0x4c, &reg2);
pci_read_config_word(bmide_dev, 0x4e, &reg3);
p += sprintf(p, "Prefetch Count: %d \t \t \t \t %d\n",
reg2, reg3);
}
p = get_masters_info(p);
p = get_slaves_info(p);
len = (p - buffer) - offset;
*addr = buffer + offset;
return len > count ? count : len;
}
#endif /* defined(DISPLAY_SIS_TIMINGS) && defined(CONFIG_PROC_FS) */
static u8 sis5513_ratemask (ide_drive_t *drive)
{
u8 rates[] = { 0, 0, 1, 2, 3, 3, 4, 4 };
u8 mode = rates[chipset_family];
if (!eighty_ninty_three(drive))
mode = min(mode, (u8)1);
return mode;
}
/*
* Configuration functions
*/
/* Enables per-drive prefetch and postwrite */
static void config_drive_art_rwp (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u8 reg4bh = 0;
u8 rw_prefetch = (0x11 << drive->dn);
if (drive->media != ide_disk)
return;
pci_read_config_byte(dev, 0x4b, &reg4bh);
if ((reg4bh & rw_prefetch) != rw_prefetch)
pci_write_config_byte(dev, 0x4b, reg4bh|rw_prefetch);
}
/* Set per-drive active and recovery time */
static void config_art_rwp_pio (ide_drive_t *drive, u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u8 timing, drive_pci, test1, test2;
u16 eide_pio_timing[6] = {600, 390, 240, 180, 120, 90};
u16 xfer_pio = drive->id->eide_pio_modes;
config_drive_art_rwp(drive);
pio = ide_get_best_pio_mode(drive, 255, pio, NULL);
if (xfer_pio> 4)
xfer_pio = 0;
if (drive->id->eide_pio_iordy > 0) {
for (xfer_pio = 5;
(xfer_pio > 0) &&
(drive->id->eide_pio_iordy > eide_pio_timing[xfer_pio]);
xfer_pio--);
} else {
xfer_pio = (drive->id->eide_pio_modes & 4) ? 0x05 :
(drive->id->eide_pio_modes & 2) ? 0x04 :
(drive->id->eide_pio_modes & 1) ? 0x03 : xfer_pio;
}
timing = (xfer_pio >= pio) ? xfer_pio : pio;
/* In pre ATA_133 case, drives sit at 0x40 + 4*drive->dn */
drive_pci = 0x40;
/* In SiS962 case drives sit at (0x40 or 0x70) + 8*drive->dn) */
if (chipset_family >= ATA_133) {
u32 reg54h;
pci_read_config_dword(dev, 0x54, &reg54h);
if (reg54h & 0x40000000) drive_pci = 0x70;
drive_pci += ((drive->dn)*0x4);
} else {
drive_pci += ((drive->dn)*0x2);
}
/* register layout changed with newer ATA100 chips */
if (chipset_family < ATA_100) {
pci_read_config_byte(dev, drive_pci, &test1);
pci_read_config_byte(dev, drive_pci+1, &test2);
/* Clear active and recovery timings */
test1 &= ~0x0F;
test2 &= ~0x07;
switch(timing) {
case 4: test1 |= 0x01; test2 |= 0x03; break;
case 3: test1 |= 0x03; test2 |= 0x03; break;
case 2: test1 |= 0x04; test2 |= 0x04; break;
case 1: test1 |= 0x07; test2 |= 0x06; break;
default: break;
}
pci_write_config_byte(dev, drive_pci, test1);
pci_write_config_byte(dev, drive_pci+1, test2);
} else if (chipset_family < ATA_133) {
switch(timing) { /* active recovery
v v */
case 4: test1 = 0x30|0x01; break;
case 3: test1 = 0x30|0x03; break;
case 2: test1 = 0x40|0x04; break;
case 1: test1 = 0x60|0x07; break;
case 0: test1 = 0x00; break;
default: break;
}
pci_write_config_byte(dev, drive_pci, test1);
} else { /* ATA_133 */
u32 test3;
pci_read_config_dword(dev, drive_pci, &test3);
test3 &= 0xc0c00fff;
if (test3 & 0x08) {
test3 |= (unsigned long)ini_time_value[ATA_133][timing] << 12;
test3 |= (unsigned long)act_time_value[ATA_133][timing] << 16;
test3 |= (unsigned long)rco_time_value[ATA_133][timing] << 24;
} else {
test3 |= (unsigned long)ini_time_value[ATA_100][timing] << 12;
test3 |= (unsigned long)act_time_value[ATA_100][timing] << 16;
test3 |= (unsigned long)rco_time_value[ATA_100][timing] << 24;
}
pci_write_config_dword(dev, drive_pci, test3);
}
}
static int config_chipset_for_pio (ide_drive_t *drive, u8 pio)
{
if (pio == 255)
pio = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO) - XFER_PIO_0;
config_art_rwp_pio(drive, pio);
return ide_config_drive_speed(drive, XFER_PIO_0 + min_t(u8, pio, 4));
}
static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u8 drive_pci, reg, speed;
u32 regdw;
speed = ide_rate_filter(sis5513_ratemask(drive), xferspeed);
/* See config_art_rwp_pio for drive pci config registers */
drive_pci = 0x40;
if (chipset_family >= ATA_133) {
u32 reg54h;
pci_read_config_dword(dev, 0x54, &reg54h);
if (reg54h & 0x40000000) drive_pci = 0x70;
drive_pci += ((drive->dn)*0x4);
pci_read_config_dword(dev, (unsigned long)drive_pci, &regdw);
/* Disable UDMA bit for non UDMA modes on UDMA chips */
if (speed < XFER_UDMA_0) {
regdw &= 0xfffffffb;
pci_write_config_dword(dev, (unsigned long)drive_pci, regdw);
}
} else {
drive_pci += ((drive->dn)*0x2);
pci_read_config_byte(dev, drive_pci+1, &reg);
/* Disable UDMA bit for non UDMA modes on UDMA chips */
if ((speed < XFER_UDMA_0) && (chipset_family > ATA_16)) {
reg &= 0x7F;
pci_write_config_byte(dev, drive_pci+1, reg);
}
}
/* Config chip for mode */
switch(speed) {
case XFER_UDMA_6:
case XFER_UDMA_5:
case XFER_UDMA_4:
case XFER_UDMA_3:
case XFER_UDMA_2:
case XFER_UDMA_1:
case XFER_UDMA_0:
if (chipset_family >= ATA_133) {
regdw |= 0x04;
regdw &= 0xfffff00f;
/* check if ATA133 enable */
if (regdw & 0x08) {
regdw |= (unsigned long)cycle_time_value[ATA_133][speed-XFER_UDMA_0] << 4;
regdw |= (unsigned long)cvs_time_value[ATA_133][speed-XFER_UDMA_0] << 8;
} else {
/* if ATA133 disable, we should not set speed above UDMA5 */
if (speed > XFER_UDMA_5)
speed = XFER_UDMA_5;
regdw |= (unsigned long)cycle_time_value[ATA_100][speed-XFER_UDMA_0] << 4;
regdw |= (unsigned long)cvs_time_value[ATA_100][speed-XFER_UDMA_0] << 8;
}
pci_write_config_dword(dev, (unsigned long)drive_pci, regdw);
} else {
/* Force the UDMA bit on if we want to use UDMA */
reg |= 0x80;
/* clean reg cycle time bits */
reg &= ~((0xFF >> (8 - cycle_time_range[chipset_family]))
<< cycle_time_offset[chipset_family]);
/* set reg cycle time bits */
reg |= cycle_time_value[chipset_family][speed-XFER_UDMA_0]
<< cycle_time_offset[chipset_family];
pci_write_config_byte(dev, drive_pci+1, reg);
}
break;
case XFER_MW_DMA_2:
case XFER_MW_DMA_1:
case XFER_MW_DMA_0:
case XFER_SW_DMA_2:
case XFER_SW_DMA_1:
case XFER_SW_DMA_0:
break;
case XFER_PIO_4: return((int) config_chipset_for_pio(drive, 4));
case XFER_PIO_3: return((int) config_chipset_for_pio(drive, 3));
case XFER_PIO_2: return((int) config_chipset_for_pio(drive, 2));
case XFER_PIO_1: return((int) config_chipset_for_pio(drive, 1));
case XFER_PIO_0:
default: return((int) config_chipset_for_pio(drive, 0));
}
return ((int) ide_config_drive_speed(drive, speed));
}
static void sis5513_tune_drive (ide_drive_t *drive, u8 pio)
{
(void) config_chipset_for_pio(drive, pio);
}
/*
* ((id->hw_config & 0x4000|0x2000) && (HWIF(drive)->udma_four))
*/
static int config_chipset_for_dma (ide_drive_t *drive)
{
u8 speed = ide_dma_speed(drive, sis5513_ratemask(drive));
#ifdef DEBUG
printk("SIS5513: config_chipset_for_dma, drive %d, ultra %x\n",
drive->dn, drive->id->dma_ultra);
#endif
if (!(speed))
return 0;
sis5513_tune_chipset(drive, speed);
return ide_dma_enable(drive);
}
static int sis5513_config_drive_xfer_rate (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct hd_driveid *id = drive->id;
drive->init_speed = 0;
if (id && (id->capability & 1) && drive->autodma) {
if (ide_use_dma(drive)) {
if (config_chipset_for_dma(drive))
return hwif->ide_dma_on(drive);
}
goto fast_ata_pio;
} else if ((id->capability & 8) || (id->field_valid & 2)) {
fast_ata_pio:
sis5513_tune_drive(drive, 5);
return hwif->ide_dma_off_quietly(drive);
}
/* IORDY not supported */
return 0;
}
/* initiates/aborts (U)DMA read/write operations on a drive. */
static int sis5513_config_xfer_rate (ide_drive_t *drive)
{
config_drive_art_rwp(drive);
config_art_rwp_pio(drive, 5);
return sis5513_config_drive_xfer_rate(drive);
}
/*
Future simpler config_xfer_rate :
When ide_find_best_mode is made bad-drive aware
- remove config_drive_xfer_rate and config_chipset_for_dma,
- replace config_xfer_rate with the following
static int sis5513_config_xfer_rate (ide_drive_t *drive)
{
u16 w80 = HWIF(drive)->udma_four;
u16 speed;
config_drive_art_rwp(drive);
config_art_rwp_pio(drive, 5);
speed = ide_find_best_mode(drive,
XFER_PIO | XFER_EPIO | XFER_SWDMA | XFER_MWDMA |
(chipset_family >= ATA_33 ? XFER_UDMA : 0) |
(w80 && chipset_family >= ATA_66 ? XFER_UDMA_66 : 0) |
(w80 && chipset_family >= ATA_100a ? XFER_UDMA_100 : 0) |
(w80 && chipset_family >= ATA_133a ? XFER_UDMA_133 : 0));
sis5513_tune_chipset(drive, speed);
if (drive->autodma && (speed & XFER_MODE) != XFER_PIO)
return HWIF(drive)->ide_dma_on(drive);
return HWIF(drive)->ide_dma_off_quietly(drive);
}
*/
/* Chip detection and general config */
static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const char *name)
{
struct pci_dev *host;
int i = 0;
chipset_family = 0;
for (i = 0; i < ARRAY_SIZE(SiSHostChipInfo) && !chipset_family; i++) {
host = pci_get_device(PCI_VENDOR_ID_SI, SiSHostChipInfo[i].host_id, NULL);
if (!host)
continue;
chipset_family = SiSHostChipInfo[i].chipset_family;
/* Special case for SiS630 : 630S/ET is ATA_100a */
if (SiSHostChipInfo[i].host_id == PCI_DEVICE_ID_SI_630) {
u8 hostrev;
pci_read_config_byte(host, PCI_REVISION_ID, &hostrev);
if (hostrev >= 0x30)
chipset_family = ATA_100a;
}
pci_dev_put(host);
printk(KERN_INFO "SIS5513: %s %s controller\n",
SiSHostChipInfo[i].name, chipset_capability[chipset_family]);
}
if (!chipset_family) { /* Belongs to pci-quirks */
u32 idemisc;
u16 trueid;
/* Disable ID masking and register remapping */
pci_read_config_dword(dev, 0x54, &idemisc);
pci_write_config_dword(dev, 0x54, (idemisc & 0x7fffffff));
pci_read_config_word(dev, PCI_DEVICE_ID, &trueid);
pci_write_config_dword(dev, 0x54, idemisc);
if (trueid == 0x5518) {
printk(KERN_INFO "SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller\n");
chipset_family = ATA_133;
/* Check for 5513 compability mapping
* We must use this, else the port enabled code will fail,
* as it expects the enablebits at 0x4a.
*/
if ((idemisc & 0x40000000) == 0) {
pci_write_config_dword(dev, 0x54, idemisc | 0x40000000);
printk(KERN_INFO "SIS5513: Switching to 5513 register mapping\n");
}
}
}
if (!chipset_family) { /* Belongs to pci-quirks */
struct pci_dev *lpc_bridge;
u16 trueid;
u8 prefctl;
u8 idecfg;
u8 sbrev;
pci_read_config_byte(dev, 0x4a, &idecfg);
pci_write_config_byte(dev, 0x4a, idecfg | 0x10);
pci_read_config_word(dev, PCI_DEVICE_ID, &trueid);
pci_write_config_byte(dev, 0x4a, idecfg);
if (trueid == 0x5517) { /* SiS 961/961B */
lpc_bridge = pci_find_slot(0x00, 0x10); /* Bus 0, Dev 2, Fn 0 */
pci_read_config_byte(lpc_bridge, PCI_REVISION_ID, &sbrev);
pci_read_config_byte(dev, 0x49, &prefctl);
if (sbrev == 0x10 && (prefctl & 0x80)) {
printk(KERN_INFO "SIS5513: SiS 961B MuTIOL IDE UDMA133 controller\n");
chipset_family = ATA_133a;
} else {
printk(KERN_INFO "SIS5513: SiS 961 MuTIOL IDE UDMA100 controller\n");
chipset_family = ATA_100;
}
}
}
if (!chipset_family)
return -1;
/* Make general config ops here
1/ tell IDE channels to operate in Compatibility mode only
2/ tell old chips to allow per drive IDE timings */
{
u8 reg;
u16 regw;
switch(chipset_family) {
case ATA_133:
/* SiS962 operation mode */
pci_read_config_word(dev, 0x50, &regw);
if (regw & 0x08)
pci_write_config_word(dev, 0x50, regw&0xfff7);
pci_read_config_word(dev, 0x52, &regw);
if (regw & 0x08)
pci_write_config_word(dev, 0x52, regw&0xfff7);
break;
case ATA_133a:
case ATA_100:
/* Fixup latency */
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x80);
/* Set compatibility bit */
pci_read_config_byte(dev, 0x49, &reg);
if (!(reg & 0x01)) {
pci_write_config_byte(dev, 0x49, reg|0x01);
}
break;
case ATA_100a:
case ATA_66:
/* Fixup latency */
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x10);
/* On ATA_66 chips the bit was elsewhere */
pci_read_config_byte(dev, 0x52, &reg);
if (!(reg & 0x04)) {
pci_write_config_byte(dev, 0x52, reg|0x04);
}
break;
case ATA_33:
/* On ATA_33 we didn't have a single bit to set */
pci_read_config_byte(dev, 0x09, &reg);
if ((reg & 0x0f) != 0x00) {
pci_write_config_byte(dev, 0x09, reg&0xf0);
}
case ATA_16:
/* force per drive recovery and active timings
needed on ATA_33 and below chips */
pci_read_config_byte(dev, 0x52, &reg);
if (!(reg & 0x08)) {
pci_write_config_byte(dev, 0x52, reg|0x08);
}
break;
}
#if defined(DISPLAY_SIS_TIMINGS) && defined(CONFIG_PROC_FS)
if (!sis_proc) {
sis_proc = 1;
bmide_dev = dev;
ide_pci_create_host_proc("sis", sis_get_info);
}
#endif
}
return 0;
}
static unsigned int __devinit ata66_sis5513 (ide_hwif_t *hwif)
{
u8 ata66 = 0;
if (chipset_family >= ATA_133) {
u16 regw = 0;
u16 reg_addr = hwif->channel ? 0x52: 0x50;
pci_read_config_word(hwif->pci_dev, reg_addr, &regw);
ata66 = (regw & 0x8000) ? 0 : 1;
} else if (chipset_family >= ATA_66) {
u8 reg48h = 0;
u8 mask = hwif->channel ? 0x20 : 0x10;
pci_read_config_byte(hwif->pci_dev, 0x48, &reg48h);
ata66 = (reg48h & mask) ? 0 : 1;
}
return ata66;
}
static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif)
{
hwif->autodma = 0;
if (!hwif->irq)
hwif->irq = hwif->channel ? 15 : 14;
hwif->tuneproc = &sis5513_tune_drive;
hwif->speedproc = &sis5513_tune_chipset;
if (!(hwif->dma_base)) {
hwif->drives[0].autotune = 1;
hwif->drives[1].autotune = 1;
return;
}
hwif->atapi_dma = 1;
hwif->ultra_mask = 0x7f;
hwif->mwdma_mask = 0x07;
hwif->swdma_mask = 0x07;
if (!chipset_family)
return;
if (!(hwif->udma_four))
hwif->udma_four = ata66_sis5513(hwif);
if (chipset_family > ATA_16) {
hwif->ide_dma_check = &sis5513_config_xfer_rate;
if (!noautodma)
hwif->autodma = 1;
}
hwif->drives[0].autodma = hwif->autodma;
hwif->drives[1].autodma = hwif->autodma;
return;
}
static ide_pci_device_t sis5513_chipset __devinitdata = {
.name = "SIS5513",
.init_chipset = init_chipset_sis5513,
.init_hwif = init_hwif_sis5513,
.channels = 2,
.autodma = NOAUTODMA,
.enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
.bootable = ON_BOARD,
};
static int __devinit sis5513_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
return ide_setup_pci_device(dev, &sis5513_chipset);
}
static struct pci_device_id sis5513_pci_tbl[] = {
{ PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5513, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5518, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ 0, },
};
MODULE_DEVICE_TABLE(pci, sis5513_pci_tbl);
static struct pci_driver driver = {
.name = "SIS_IDE",
.id_table = sis5513_pci_tbl,
.probe = sis5513_init_one,
};
static int sis5513_ide_init(void)
{
return ide_pci_register_driver(&driver);
}
module_init(sis5513_ide_init);
MODULE_AUTHOR("Lionel Bouton, L C Chang, Andre Hedrick, Vojtech Pavlik");
MODULE_DESCRIPTION("PCI driver module for SIS IDE");
MODULE_LICENSE("GPL");
/*
* TODO:
* - CLEANUP
* - Use drivers/ide/ide-timing.h !
* - More checks in the config registers (force values instead of
* relying on the BIOS setting them correctly).
* - Further optimisations ?
* . for example ATA66+ regs 0x48 & 0x4A
*/
Reference in New Issue View Git Blame Copy Permalink