241 lines
6.3 KiB
C
241 lines
6.3 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Copyright (C) 2017 John Crispin <john@phrozen.org>
|
|
*
|
|
* Based on code from
|
|
* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/reset.h>
|
|
|
|
#define RT_SYSC_REG_SYSCFG1 0x014
|
|
#define RT_SYSC_REG_CLKCFG1 0x030
|
|
#define RT_SYSC_REG_USB_PHY_CFG 0x05c
|
|
|
|
#define OFS_U2_PHY_AC0 0x800
|
|
#define OFS_U2_PHY_AC1 0x804
|
|
#define OFS_U2_PHY_AC2 0x808
|
|
#define OFS_U2_PHY_ACR0 0x810
|
|
#define OFS_U2_PHY_ACR1 0x814
|
|
#define OFS_U2_PHY_ACR2 0x818
|
|
#define OFS_U2_PHY_ACR3 0x81C
|
|
#define OFS_U2_PHY_ACR4 0x820
|
|
#define OFS_U2_PHY_AMON0 0x824
|
|
#define OFS_U2_PHY_DCR0 0x860
|
|
#define OFS_U2_PHY_DCR1 0x864
|
|
#define OFS_U2_PHY_DTM0 0x868
|
|
#define OFS_U2_PHY_DTM1 0x86C
|
|
|
|
#define RT_RSTCTRL_UDEV BIT(25)
|
|
#define RT_RSTCTRL_UHST BIT(22)
|
|
#define RT_SYSCFG1_USB0_HOST_MODE BIT(10)
|
|
|
|
#define MT7620_CLKCFG1_UPHY0_CLK_EN BIT(25)
|
|
#define MT7620_CLKCFG1_UPHY1_CLK_EN BIT(22)
|
|
#define RT_CLKCFG1_UPHY1_CLK_EN BIT(20)
|
|
#define RT_CLKCFG1_UPHY0_CLK_EN BIT(18)
|
|
|
|
#define USB_PHY_UTMI_8B60M BIT(1)
|
|
#define UDEV_WAKEUP BIT(0)
|
|
|
|
struct ralink_usb_phy {
|
|
struct reset_control *rstdev;
|
|
struct reset_control *rsthost;
|
|
u32 clk;
|
|
struct phy *phy;
|
|
void __iomem *base;
|
|
struct regmap *sysctl;
|
|
};
|
|
|
|
static void u2_phy_w32(struct ralink_usb_phy *phy, u32 val, u32 reg)
|
|
{
|
|
writel(val, phy->base + reg);
|
|
}
|
|
|
|
static u32 u2_phy_r32(struct ralink_usb_phy *phy, u32 reg)
|
|
{
|
|
return readl(phy->base + reg);
|
|
}
|
|
|
|
static void ralink_usb_phy_init(struct ralink_usb_phy *phy)
|
|
{
|
|
u2_phy_r32(phy, OFS_U2_PHY_AC2);
|
|
u2_phy_r32(phy, OFS_U2_PHY_ACR0);
|
|
u2_phy_r32(phy, OFS_U2_PHY_DCR0);
|
|
|
|
u2_phy_w32(phy, 0x00ffff02, OFS_U2_PHY_DCR0);
|
|
u2_phy_r32(phy, OFS_U2_PHY_DCR0);
|
|
u2_phy_w32(phy, 0x00555502, OFS_U2_PHY_DCR0);
|
|
u2_phy_r32(phy, OFS_U2_PHY_DCR0);
|
|
u2_phy_w32(phy, 0x00aaaa02, OFS_U2_PHY_DCR0);
|
|
u2_phy_r32(phy, OFS_U2_PHY_DCR0);
|
|
u2_phy_w32(phy, 0x00000402, OFS_U2_PHY_DCR0);
|
|
u2_phy_r32(phy, OFS_U2_PHY_DCR0);
|
|
u2_phy_w32(phy, 0x0048086a, OFS_U2_PHY_AC0);
|
|
u2_phy_w32(phy, 0x4400001c, OFS_U2_PHY_AC1);
|
|
u2_phy_w32(phy, 0xc0200000, OFS_U2_PHY_ACR3);
|
|
u2_phy_w32(phy, 0x02000000, OFS_U2_PHY_DTM0);
|
|
}
|
|
|
|
static int ralink_usb_phy_power_on(struct phy *_phy)
|
|
{
|
|
struct ralink_usb_phy *phy = phy_get_drvdata(_phy);
|
|
u32 t;
|
|
|
|
/* enable the phy */
|
|
regmap_update_bits(phy->sysctl, RT_SYSC_REG_CLKCFG1,
|
|
phy->clk, phy->clk);
|
|
|
|
/* setup host mode */
|
|
regmap_update_bits(phy->sysctl, RT_SYSC_REG_SYSCFG1,
|
|
RT_SYSCFG1_USB0_HOST_MODE,
|
|
RT_SYSCFG1_USB0_HOST_MODE);
|
|
|
|
/* deassert the reset lines */
|
|
reset_control_deassert(phy->rsthost);
|
|
reset_control_deassert(phy->rstdev);
|
|
|
|
/*
|
|
* The SDK kernel had a delay of 100ms. however on device
|
|
* testing showed that 10ms is enough
|
|
*/
|
|
mdelay(10);
|
|
|
|
if (phy->base)
|
|
ralink_usb_phy_init(phy);
|
|
|
|
/* print some status info */
|
|
regmap_read(phy->sysctl, RT_SYSC_REG_USB_PHY_CFG, &t);
|
|
dev_info(&phy->phy->dev, "remote usb device wakeup %s\n",
|
|
(t & UDEV_WAKEUP) ? ("enabled") : ("disabled"));
|
|
if (t & USB_PHY_UTMI_8B60M)
|
|
dev_info(&phy->phy->dev, "UTMI 8bit 60MHz\n");
|
|
else
|
|
dev_info(&phy->phy->dev, "UTMI 16bit 30MHz\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ralink_usb_phy_power_off(struct phy *_phy)
|
|
{
|
|
struct ralink_usb_phy *phy = phy_get_drvdata(_phy);
|
|
|
|
/* disable the phy */
|
|
regmap_update_bits(phy->sysctl, RT_SYSC_REG_CLKCFG1,
|
|
phy->clk, 0);
|
|
|
|
/* assert the reset lines */
|
|
reset_control_assert(phy->rstdev);
|
|
reset_control_assert(phy->rsthost);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct phy_ops ralink_usb_phy_ops = {
|
|
.power_on = ralink_usb_phy_power_on,
|
|
.power_off = ralink_usb_phy_power_off,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static const struct of_device_id ralink_usb_phy_of_match[] = {
|
|
{
|
|
.compatible = "ralink,rt3352-usbphy",
|
|
.data = (void *)(uintptr_t)(RT_CLKCFG1_UPHY1_CLK_EN |
|
|
RT_CLKCFG1_UPHY0_CLK_EN)
|
|
},
|
|
{
|
|
.compatible = "mediatek,mt7620-usbphy",
|
|
.data = (void *)(uintptr_t)(MT7620_CLKCFG1_UPHY1_CLK_EN |
|
|
MT7620_CLKCFG1_UPHY0_CLK_EN)
|
|
},
|
|
{
|
|
.compatible = "mediatek,mt7628-usbphy",
|
|
.data = (void *)(uintptr_t)(MT7620_CLKCFG1_UPHY1_CLK_EN |
|
|
MT7620_CLKCFG1_UPHY0_CLK_EN) },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ralink_usb_phy_of_match);
|
|
|
|
static int ralink_usb_phy_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct resource *res;
|
|
struct phy_provider *phy_provider;
|
|
const struct of_device_id *match;
|
|
struct ralink_usb_phy *phy;
|
|
|
|
match = of_match_device(ralink_usb_phy_of_match, &pdev->dev);
|
|
if (!match)
|
|
return -ENODEV;
|
|
|
|
phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
|
|
if (!phy)
|
|
return -ENOMEM;
|
|
|
|
phy->clk = (uintptr_t)match->data;
|
|
phy->base = NULL;
|
|
|
|
phy->sysctl = syscon_regmap_lookup_by_phandle(dev->of_node, "ralink,sysctl");
|
|
if (IS_ERR(phy->sysctl)) {
|
|
dev_err(dev, "failed to get sysctl registers\n");
|
|
return PTR_ERR(phy->sysctl);
|
|
}
|
|
|
|
/* The MT7628 and MT7688 require extra setup of PHY registers. */
|
|
if (of_device_is_compatible(dev->of_node, "mediatek,mt7628-usbphy")) {
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
phy->base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(phy->base)) {
|
|
dev_err(dev, "failed to remap register memory\n");
|
|
return PTR_ERR(phy->base);
|
|
}
|
|
}
|
|
|
|
phy->rsthost = devm_reset_control_get(&pdev->dev, "host");
|
|
if (IS_ERR(phy->rsthost)) {
|
|
dev_err(dev, "host reset is missing\n");
|
|
return PTR_ERR(phy->rsthost);
|
|
}
|
|
|
|
phy->rstdev = devm_reset_control_get(&pdev->dev, "device");
|
|
if (IS_ERR(phy->rstdev)) {
|
|
dev_err(dev, "device reset is missing\n");
|
|
return PTR_ERR(phy->rstdev);
|
|
}
|
|
|
|
phy->phy = devm_phy_create(dev, NULL, &ralink_usb_phy_ops);
|
|
if (IS_ERR(phy->phy)) {
|
|
dev_err(dev, "failed to create PHY\n");
|
|
return PTR_ERR(phy->phy);
|
|
}
|
|
phy_set_drvdata(phy->phy, phy);
|
|
|
|
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
|
|
|
|
return PTR_ERR_OR_ZERO(phy_provider);
|
|
}
|
|
|
|
static struct platform_driver ralink_usb_phy_driver = {
|
|
.probe = ralink_usb_phy_probe,
|
|
.driver = {
|
|
.of_match_table = ralink_usb_phy_of_match,
|
|
.name = "ralink-usb-phy",
|
|
}
|
|
};
|
|
module_platform_driver(ralink_usb_phy_driver);
|
|
|
|
MODULE_DESCRIPTION("Ralink USB phy driver");
|
|
MODULE_AUTHOR("John Crispin <john@phrozen.org>");
|
|
MODULE_LICENSE("GPL v2");
|