linux-sg2042/drivers/ptp/ptp_idt82p33.h

175 lines
4.4 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* PTP hardware clock driver for the IDT 82P33XXX family of clocks.
*
* Copyright (C) 2019 Integrated Device Technology, Inc., a Renesas Company.
*/
#ifndef PTP_IDT82P33_H
#define PTP_IDT82P33_H
#include <linux/ktime.h>
#include <linux/workqueue.h>
/* Register Map - AN888_SMUforIEEE_SynchEther_82P33xxx_RevH.pdf */
#define PAGE_NUM (8)
#define _ADDR(page, offset) (((page) << 0x7) | ((offset) & 0x7f))
#define _PAGE(addr) (((addr) >> 0x7) & 0x7)
#define _OFFSET(addr) ((addr) & 0x7f)
#define DPLL1_TOD_CNFG 0x134
#define DPLL2_TOD_CNFG 0x1B4
#define DPLL1_TOD_STS 0x10B
#define DPLL2_TOD_STS 0x18B
#define DPLL1_TOD_TRIGGER 0x115
#define DPLL2_TOD_TRIGGER 0x195
#define DPLL1_OPERATING_MODE_CNFG 0x120
#define DPLL2_OPERATING_MODE_CNFG 0x1A0
#define DPLL1_HOLDOVER_FREQ_CNFG 0x12C
#define DPLL2_HOLDOVER_FREQ_CNFG 0x1AC
#define DPLL1_PHASE_OFFSET_CNFG 0x143
#define DPLL2_PHASE_OFFSET_CNFG 0x1C3
#define DPLL1_SYNC_EDGE_CNFG 0X140
#define DPLL2_SYNC_EDGE_CNFG 0X1C0
#define DPLL1_INPUT_MODE_CNFG 0X116
#define DPLL2_INPUT_MODE_CNFG 0X196
#define OUT_MUX_CNFG(outn) _ADDR(0x6, (0xC * (outn)))
#define PAGE_ADDR 0x7F
/* Register Map end */
/* Register definitions - AN888_SMUforIEEE_SynchEther_82P33xxx_RevH.pdf*/
#define TOD_TRIGGER(wr_trig, rd_trig) ((wr_trig & 0xf) << 4 | (rd_trig & 0xf))
#define SYNC_TOD BIT(1)
#define PH_OFFSET_EN BIT(7)
#define SQUELCH_ENABLE BIT(5)
/* Bit definitions for the DPLL_MODE register */
#define PLL_MODE_SHIFT (0)
#define PLL_MODE_MASK (0x1F)
#define PEROUT_ENABLE_OUTPUT_MASK (0xdeadbeef)
enum pll_mode {
PLL_MODE_MIN = 0,
PLL_MODE_AUTOMATIC = PLL_MODE_MIN,
PLL_MODE_FORCE_FREERUN = 1,
PLL_MODE_FORCE_HOLDOVER = 2,
PLL_MODE_FORCE_LOCKED = 4,
PLL_MODE_FORCE_PRE_LOCKED2 = 5,
PLL_MODE_FORCE_PRE_LOCKED = 6,
PLL_MODE_FORCE_LOST_PHASE = 7,
PLL_MODE_DCO = 10,
PLL_MODE_WPH = 18,
PLL_MODE_MAX = PLL_MODE_WPH,
};
enum hw_tod_trig_sel {
HW_TOD_TRIG_SEL_MIN = 0,
HW_TOD_TRIG_SEL_NO_WRITE = HW_TOD_TRIG_SEL_MIN,
HW_TOD_TRIG_SEL_SYNC_SEL = 1,
HW_TOD_TRIG_SEL_IN12 = 2,
HW_TOD_TRIG_SEL_IN13 = 3,
HW_TOD_TRIG_SEL_IN14 = 4,
HW_TOD_TRIG_SEL_TOD_PPS = 5,
HW_TOD_TRIG_SEL_TIMER_INTERVAL = 6,
HW_TOD_TRIG_SEL_MSB_PHASE_OFFSET_CNFG = 7,
HW_TOD_TRIG_SEL_MSB_HOLDOVER_FREQ_CNFG = 8,
HW_TOD_WR_TRIG_SEL_MSB_TOD_CNFG = 9,
HW_TOD_RD_TRIG_SEL_LSB_TOD_STS = HW_TOD_WR_TRIG_SEL_MSB_TOD_CNFG,
WR_TRIG_SEL_MAX = HW_TOD_WR_TRIG_SEL_MSB_TOD_CNFG,
};
/* Register bit definitions end */
#define FW_FILENAME "idt82p33xxx.bin"
#define MAX_PHC_PLL (2)
#define TOD_BYTE_COUNT (10)
#define MAX_MEASURMENT_COUNT (5)
#define SNAP_THRESHOLD_NS (150000)
#define SYNC_TOD_TIMEOUT_SEC (5)
#define IDT82P33_MAX_WRITE_COUNT (512)
#define PLLMASK_ADDR_HI 0xFF
#define PLLMASK_ADDR_LO 0xA5
#define PLL0_OUTMASK_ADDR_HI 0xFF
#define PLL0_OUTMASK_ADDR_LO 0xB0
#define PLL1_OUTMASK_ADDR_HI 0xFF
#define PLL1_OUTMASK_ADDR_LO 0xB2
#define PLL2_OUTMASK_ADDR_HI 0xFF
#define PLL2_OUTMASK_ADDR_LO 0xB4
#define PLL3_OUTMASK_ADDR_HI 0xFF
#define PLL3_OUTMASK_ADDR_LO 0xB6
#define DEFAULT_PLL_MASK (0x01)
#define DEFAULT_OUTPUT_MASK_PLL0 (0xc0)
#define DEFAULT_OUTPUT_MASK_PLL1 DEFAULT_OUTPUT_MASK_PLL0
/* PTP Hardware Clock interface */
struct idt82p33_channel {
struct ptp_clock_info caps;
struct ptp_clock *ptp_clock;
struct idt82p33 *idt82p33;
enum pll_mode pll_mode;
/* task to turn off SYNC_TOD bit after pps sync */
struct delayed_work sync_tod_work;
bool sync_tod_on;
s32 current_freq_ppb;
u8 output_mask;
u16 dpll_tod_cnfg;
u16 dpll_tod_trigger;
u16 dpll_tod_sts;
u16 dpll_mode_cnfg;
u16 dpll_freq_cnfg;
u16 dpll_phase_cnfg;
u16 dpll_sync_cnfg;
u16 dpll_input_mode_cnfg;
};
struct idt82p33 {
struct idt82p33_channel channel[MAX_PHC_PLL];
struct i2c_client *client;
u8 page_offset;
u8 pll_mask;
ktime_t start_time;
int calculate_overhead_flag;
s64 tod_write_overhead_ns;
/* Protects I2C read/modify/write registers from concurrent access */
struct mutex reg_lock;
};
/* firmware interface */
struct idt82p33_fwrc {
u8 hiaddr;
u8 loaddr;
u8 value;
u8 reserved;
} __packed;
/**
* @brief Maximum absolute value for write phase offset in femtoseconds
*/
#define WRITE_PHASE_OFFSET_LIMIT (20000052084ll)
/** @brief Phase offset resolution
*
* DPLL phase offset = 10^15 fs / ( System Clock * 2^13)
* = 10^15 fs / ( 1638400000 * 2^23)
* = 74.5058059692382 fs
*/
#define IDT_T0DPLL_PHASE_RESOL 74506
#endif /* PTP_IDT82P33_H */