linux-sg2042/include/acpi/actbl.h

311 lines
11 KiB
C

/******************************************************************************
*
* Name: actbl.h - Table data structures defined in ACPI specification
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2005, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#ifndef __ACTBL_H__
#define __ACTBL_H__
/*
* Values for description table header signatures
*/
#define RSDP_NAME "RSDP"
#define RSDP_SIG "RSD PTR " /* RSDT Pointer signature */
#define APIC_SIG "APIC" /* Multiple APIC Description Table */
#define DSDT_SIG "DSDT" /* Differentiated System Description Table */
#define FADT_SIG "FACP" /* Fixed ACPI Description Table */
#define FACS_SIG "FACS" /* Firmware ACPI Control Structure */
#define PSDT_SIG "PSDT" /* Persistent System Description Table */
#define RSDT_SIG "RSDT" /* Root System Description Table */
#define XSDT_SIG "XSDT" /* Extended System Description Table */
#define SSDT_SIG "SSDT" /* Secondary System Description Table */
#define SBST_SIG "SBST" /* Smart Battery Specification Table */
#define SPIC_SIG "SPIC" /* IOSAPIC table */
#define BOOT_SIG "BOOT" /* Boot table */
#define GL_OWNED 0x02 /* Ownership of global lock is bit 1 */
/*
* Common table types. The base code can remain
* constant if the underlying tables are changed
*/
#define RSDT_DESCRIPTOR struct rsdt_descriptor_rev2
#define XSDT_DESCRIPTOR struct xsdt_descriptor_rev2
#define FACS_DESCRIPTOR struct facs_descriptor_rev2
#define FADT_DESCRIPTOR struct fadt_descriptor_rev2
#pragma pack(1)
/*
* ACPI Version-independent tables
*
* NOTE: The tables that are specific to ACPI versions (1.0, 2.0, etc.)
* are in separate files.
*/
struct rsdp_descriptor { /* Root System Descriptor Pointer */
char signature[8]; /* ACPI signature, contains "RSD PTR " */
u8 checksum; /* ACPI 1.0 checksum */
char oem_id[6]; /* OEM identification */
u8 revision; /* Must be (0) for ACPI 1.0 or (2) for ACPI 2.0+ */
u32 rsdt_physical_address; /* 32-bit physical address of the RSDT */
u32 length; /* XSDT Length in bytes, including header */
u64 xsdt_physical_address; /* 64-bit physical address of the XSDT */
u8 extended_checksum; /* Checksum of entire table (ACPI 2.0) */
char reserved[3]; /* Reserved, must be zero */
};
struct acpi_common_facs { /* Common FACS for internal use */
u32 *global_lock;
u64 *firmware_waking_vector;
u8 vector_width;
};
#define ACPI_TABLE_HEADER_DEF /* ACPI common table header */ \
char signature[4]; /* ASCII table signature */\
u32 length; /* Length of table in bytes, including this header */\
u8 revision; /* ACPI Specification minor version # */\
u8 checksum; /* To make sum of entire table == 0 */\
char oem_id[6]; /* ASCII OEM identification */\
char oem_table_id[8]; /* ASCII OEM table identification */\
u32 oem_revision; /* OEM revision number */\
char asl_compiler_id [4]; /* ASCII ASL compiler vendor ID */\
u32 asl_compiler_revision; /* ASL compiler version */
struct acpi_table_header { /* ACPI common table header */
ACPI_TABLE_HEADER_DEF};
/*
* MADT values and structures
*/
/* Values for MADT PCATCompat */
#define DUAL_PIC 0
#define MULTIPLE_APIC 1
/* Master MADT */
struct multiple_apic_table {
ACPI_TABLE_HEADER_DEF /* ACPI common table header */
u32 local_apic_address; /* Physical address of local APIC */
/* Flags (32 bits) */
u8 PCATcompat:1; /* 00: System also has dual 8259s */
u8:7; /* 01-07: Reserved, must be zero */
u8 reserved1[3]; /* 08-31: Reserved, must be zero */
};
/* Values for Type in APIC_HEADER_DEF */
#define APIC_PROCESSOR 0
#define APIC_IO 1
#define APIC_XRUPT_OVERRIDE 2
#define APIC_NMI 3
#define APIC_LOCAL_NMI 4
#define APIC_ADDRESS_OVERRIDE 5
#define APIC_IO_SAPIC 6
#define APIC_LOCAL_SAPIC 7
#define APIC_XRUPT_SOURCE 8
#define APIC_RESERVED 9 /* 9 and greater are reserved */
/*
* MADT sub-structures (Follow MULTIPLE_APIC_DESCRIPTION_TABLE)
*/
#define APIC_HEADER_DEF /* Common APIC sub-structure header */\
u8 type; \
u8 length;
struct apic_header {
APIC_HEADER_DEF};
/* Values for MPS INTI flags */
#define POLARITY_CONFORMS 0
#define POLARITY_ACTIVE_HIGH 1
#define POLARITY_RESERVED 2
#define POLARITY_ACTIVE_LOW 3
#define TRIGGER_CONFORMS 0
#define TRIGGER_EDGE 1
#define TRIGGER_RESERVED 2
#define TRIGGER_LEVEL 3
/* Common flag definitions (16 bits each) */
#define MPS_INTI_FLAGS \
u8 polarity : 2; /* 00-01: Polarity of APIC I/O input signals */\
u8 trigger_mode : 2; /* 02-03: Trigger mode of APIC input signals */\
u8 : 4; /* 04-07: Reserved, must be zero */\
u8 reserved1; /* 08-15: Reserved, must be zero */
#define LOCAL_APIC_FLAGS \
u8 processor_enabled: 1; /* 00: Processor is usable if set */\
u8 : 7; /* 01-07: Reserved, must be zero */\
u8 reserved2; /* 08-15: Reserved, must be zero */
/* Sub-structures for MADT */
struct madt_processor_apic {
APIC_HEADER_DEF u8 processor_id; /* ACPI processor id */
u8 local_apic_id; /* Processor's local APIC id */
LOCAL_APIC_FLAGS};
struct madt_io_apic {
APIC_HEADER_DEF u8 io_apic_id; /* I/O APIC ID */
u8 reserved; /* Reserved - must be zero */
u32 address; /* APIC physical address */
u32 interrupt; /* Global system interrupt where INTI
* lines start */
};
struct madt_interrupt_override {
APIC_HEADER_DEF u8 bus; /* 0 - ISA */
u8 source; /* Interrupt source (IRQ) */
u32 interrupt; /* Global system interrupt */
MPS_INTI_FLAGS};
struct madt_nmi_source {
APIC_HEADER_DEF MPS_INTI_FLAGS u32 interrupt; /* Global system interrupt */
};
struct madt_local_apic_nmi {
APIC_HEADER_DEF u8 processor_id; /* ACPI processor id */
MPS_INTI_FLAGS u8 lint; /* LINTn to which NMI is connected */
};
struct madt_address_override {
APIC_HEADER_DEF u16 reserved; /* Reserved, must be zero */
u64 address; /* APIC physical address */
};
struct madt_io_sapic {
APIC_HEADER_DEF u8 io_sapic_id; /* I/O SAPIC ID */
u8 reserved; /* Reserved, must be zero */
u32 interrupt_base; /* Glocal interrupt for SAPIC start */
u64 address; /* SAPIC physical address */
};
struct madt_local_sapic {
APIC_HEADER_DEF u8 processor_id; /* ACPI processor id */
u8 local_sapic_id; /* SAPIC ID */
u8 local_sapic_eid; /* SAPIC EID */
u8 reserved[3]; /* Reserved, must be zero */
LOCAL_APIC_FLAGS u32 processor_uID; /* Numeric UID - ACPI 3.0 */
char processor_uIDstring[1]; /* String UID - ACPI 3.0 */
};
struct madt_interrupt_source {
APIC_HEADER_DEF MPS_INTI_FLAGS u8 interrupt_type; /* 1=PMI, 2=INIT, 3=corrected */
u8 processor_id; /* Processor ID */
u8 processor_eid; /* Processor EID */
u8 io_sapic_vector; /* Vector value for PMI interrupts */
u32 interrupt; /* Global system interrupt */
u32 flags; /* Interrupt Source Flags */
};
/*
* Smart Battery
*/
struct smart_battery_table {
ACPI_TABLE_HEADER_DEF u32 warning_level;
u32 low_level;
u32 critical_level;
};
#pragma pack()
/*
* ACPI Table information. We save the table address, length,
* and type of memory allocation (mapped or allocated) for each
* table for 1) when we exit, and 2) if a new table is installed
*/
#define ACPI_MEM_NOT_ALLOCATED 0
#define ACPI_MEM_ALLOCATED 1
#define ACPI_MEM_MAPPED 2
/* Definitions for the Flags bitfield member of struct acpi_table_support */
#define ACPI_TABLE_SINGLE 0x00
#define ACPI_TABLE_MULTIPLE 0x01
#define ACPI_TABLE_EXECUTABLE 0x02
#define ACPI_TABLE_ROOT 0x00
#define ACPI_TABLE_PRIMARY 0x10
#define ACPI_TABLE_SECONDARY 0x20
#define ACPI_TABLE_ALL 0x30
#define ACPI_TABLE_TYPE_MASK 0x30
/* Data about each known table type */
struct acpi_table_support {
char *name;
char *signature;
void **global_ptr;
u8 sig_length;
u8 flags;
};
/*
* Get the ACPI version-specific tables
*/
#include "actbl1.h" /* Acpi 1.0 table definitions */
#include "actbl2.h" /* Acpi 2.0 table definitions */
extern u8 acpi_fadt_is_v1; /* is set to 1 if FADT is revision 1,
* needed for certain workarounds */
#pragma pack(1)
/*
* High performance timer
*/
struct hpet_table {
ACPI_TABLE_HEADER_DEF u32 hardware_id;
struct acpi_generic_address base_address;
u8 hpet_number;
u16 clock_tick;
u8 attributes;
};
#pragma pack()
#endif /* __ACTBL_H__ */