linux-sg2042/drivers/usb
John Youn 7455f8b7f0 usb: dwc2: Enable LPM
Set 'lpm_capable' flag in the gadget structure so
indicating that LPM is supported.

Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Sevak Arakelyan <sevaka@synopsys.com>
Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-03-13 10:47:53 +02:00
..
atm USB: atm: fix up some remaining DEVICE_ATTR() usage 2018-01-24 08:49:52 +01:00
c67x00 USB: add SPDX identifiers to all remaining Makefiles 2017-11-07 15:53:48 +01:00
chipidea USB: move many drivers to use DEVICE_ATTR_WO 2018-01-24 08:49:52 +01:00
class usb: cdc_acm: prevent race at write to acm while system resumes 2018-02-16 07:52:55 +01:00
common USB: ulpi: fix bus-node lookup 2017-11-28 15:17:48 +01:00
core Add delay-init quirk for Corsair K70 RGB keyboards 2018-02-15 20:52:56 +01:00
dwc2 usb: dwc2: Enable LPM 2018-03-13 10:47:53 +02:00
dwc3 usb: dwc3: add dual role support using OTG block 2018-03-13 10:47:52 +02:00
early usb: early: Correct the endpoint type value for bulk in endpoint 2017-12-07 16:03:15 +01:00
gadget usb: gadget: udc: Use scnprintf() instead of snprintf() 2018-03-13 10:47:51 +02:00
host USB fixes for 4.16-rc3 2018-02-22 12:13:01 -08:00
image USB/PHY patches for 4.15-rc1 2017-11-13 21:14:07 -08:00
isp1760 USB/PHY patches for 4.15-rc1 2017-11-13 21:14:07 -08:00
misc usb: ldusb: add PIDs for new CASSY devices supported by this driver 2018-02-15 18:44:03 +01:00
mon vfs: do bulk POLL* -> EPOLL* replacement 2018-02-11 14:34:03 -08:00
mtu3 usb: mtu3: fix semicolon.cocci warnings 2018-01-16 10:01:01 +01:00
musb Revert "usb: musb: host: don't start next rx urb if current one failed" 2018-02-20 15:02:46 +01:00
phy usb: phy: tegra: Increase PHY clock stabilization timeout 2018-03-13 10:47:52 +02:00
renesas_usbhs usb: renesas_usbhs: missed the "running" flag in usb_dmac with rx path 2018-02-15 18:43:57 +01:00
serial USB: serial: option: Add support for Quectel EP06 2018-02-15 18:36:19 +01:00
storage USB: move many drivers to use DEVICE_ATTR_RO 2018-01-24 08:49:52 +01:00
typec Merge 4.15-rc4 into usb-next 2017-12-18 09:08:05 +01:00
usbip usbip: keep usbip_device sockfd state in sync with tcp_socket 2018-02-15 18:43:57 +01:00
wusbcore USB/PHY patches for 4.15-rc1 2017-11-13 21:14:07 -08:00
Kconfig sparc,leon: Select USB_UHCI_BIG_ENDIAN_{MMIO,DESC} 2018-02-15 21:45:16 +00:00
Makefile License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
README
usb-skeleton.c USB: usb-skeleton: Remove redundant license text 2017-11-04 11:55:39 +01:00

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.