642 lines
13 KiB
C
642 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
Conexant 22702 DVB OFDM demodulator driver
|
|
|
|
based on:
|
|
Alps TDMB7 DVB OFDM demodulator driver
|
|
|
|
Copyright (C) 2001-2002 Convergence Integrated Media GmbH
|
|
Holger Waechtler <holger@convergence.de>
|
|
|
|
Copyright (C) 2004 Steven Toth <stoth@linuxtv.org>
|
|
|
|
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/string.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <media/dvb_frontend.h>
|
|
#include "cx22702.h"
|
|
|
|
struct cx22702_state {
|
|
|
|
struct i2c_adapter *i2c;
|
|
|
|
/* configuration settings */
|
|
const struct cx22702_config *config;
|
|
|
|
struct dvb_frontend frontend;
|
|
|
|
/* previous uncorrected block counter */
|
|
u8 prevUCBlocks;
|
|
};
|
|
|
|
static int debug;
|
|
module_param(debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "Enable verbose debug messages");
|
|
|
|
#define dprintk if (debug) printk
|
|
|
|
/* Register values to initialise the demod */
|
|
static const u8 init_tab[] = {
|
|
0x00, 0x00, /* Stop acquisition */
|
|
0x0B, 0x06,
|
|
0x09, 0x01,
|
|
0x0D, 0x41,
|
|
0x16, 0x32,
|
|
0x20, 0x0A,
|
|
0x21, 0x17,
|
|
0x24, 0x3e,
|
|
0x26, 0xff,
|
|
0x27, 0x10,
|
|
0x28, 0x00,
|
|
0x29, 0x00,
|
|
0x2a, 0x10,
|
|
0x2b, 0x00,
|
|
0x2c, 0x10,
|
|
0x2d, 0x00,
|
|
0x48, 0xd4,
|
|
0x49, 0x56,
|
|
0x6b, 0x1e,
|
|
0xc8, 0x02,
|
|
0xf9, 0x00,
|
|
0xfa, 0x00,
|
|
0xfb, 0x00,
|
|
0xfc, 0x00,
|
|
0xfd, 0x00,
|
|
};
|
|
|
|
static int cx22702_writereg(struct cx22702_state *state, u8 reg, u8 data)
|
|
{
|
|
int ret;
|
|
u8 buf[] = { reg, data };
|
|
struct i2c_msg msg = {
|
|
.addr = state->config->demod_address, .flags = 0,
|
|
.buf = buf, .len = 2 };
|
|
|
|
ret = i2c_transfer(state->i2c, &msg, 1);
|
|
|
|
if (unlikely(ret != 1)) {
|
|
printk(KERN_ERR
|
|
"%s: error (reg == 0x%02x, val == 0x%02x, ret == %i)\n",
|
|
__func__, reg, data, ret);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u8 cx22702_readreg(struct cx22702_state *state, u8 reg)
|
|
{
|
|
int ret;
|
|
u8 data;
|
|
|
|
struct i2c_msg msg[] = {
|
|
{ .addr = state->config->demod_address, .flags = 0,
|
|
.buf = ®, .len = 1 },
|
|
{ .addr = state->config->demod_address, .flags = I2C_M_RD,
|
|
.buf = &data, .len = 1 } };
|
|
|
|
ret = i2c_transfer(state->i2c, msg, 2);
|
|
|
|
if (unlikely(ret != 2)) {
|
|
printk(KERN_ERR "%s: error (reg == 0x%02x, ret == %i)\n",
|
|
__func__, reg, ret);
|
|
return 0;
|
|
}
|
|
|
|
return data;
|
|
}
|
|
|
|
static int cx22702_set_inversion(struct cx22702_state *state, int inversion)
|
|
{
|
|
u8 val;
|
|
|
|
val = cx22702_readreg(state, 0x0C);
|
|
switch (inversion) {
|
|
case INVERSION_AUTO:
|
|
return -EOPNOTSUPP;
|
|
case INVERSION_ON:
|
|
val |= 0x01;
|
|
break;
|
|
case INVERSION_OFF:
|
|
val &= 0xfe;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return cx22702_writereg(state, 0x0C, val);
|
|
}
|
|
|
|
/* Retrieve the demod settings */
|
|
static int cx22702_get_tps(struct cx22702_state *state,
|
|
struct dtv_frontend_properties *p)
|
|
{
|
|
u8 val;
|
|
|
|
/* Make sure the TPS regs are valid */
|
|
if (!(cx22702_readreg(state, 0x0A) & 0x20))
|
|
return -EAGAIN;
|
|
|
|
val = cx22702_readreg(state, 0x01);
|
|
switch ((val & 0x18) >> 3) {
|
|
case 0:
|
|
p->modulation = QPSK;
|
|
break;
|
|
case 1:
|
|
p->modulation = QAM_16;
|
|
break;
|
|
case 2:
|
|
p->modulation = QAM_64;
|
|
break;
|
|
}
|
|
switch (val & 0x07) {
|
|
case 0:
|
|
p->hierarchy = HIERARCHY_NONE;
|
|
break;
|
|
case 1:
|
|
p->hierarchy = HIERARCHY_1;
|
|
break;
|
|
case 2:
|
|
p->hierarchy = HIERARCHY_2;
|
|
break;
|
|
case 3:
|
|
p->hierarchy = HIERARCHY_4;
|
|
break;
|
|
}
|
|
|
|
|
|
val = cx22702_readreg(state, 0x02);
|
|
switch ((val & 0x38) >> 3) {
|
|
case 0:
|
|
p->code_rate_HP = FEC_1_2;
|
|
break;
|
|
case 1:
|
|
p->code_rate_HP = FEC_2_3;
|
|
break;
|
|
case 2:
|
|
p->code_rate_HP = FEC_3_4;
|
|
break;
|
|
case 3:
|
|
p->code_rate_HP = FEC_5_6;
|
|
break;
|
|
case 4:
|
|
p->code_rate_HP = FEC_7_8;
|
|
break;
|
|
}
|
|
switch (val & 0x07) {
|
|
case 0:
|
|
p->code_rate_LP = FEC_1_2;
|
|
break;
|
|
case 1:
|
|
p->code_rate_LP = FEC_2_3;
|
|
break;
|
|
case 2:
|
|
p->code_rate_LP = FEC_3_4;
|
|
break;
|
|
case 3:
|
|
p->code_rate_LP = FEC_5_6;
|
|
break;
|
|
case 4:
|
|
p->code_rate_LP = FEC_7_8;
|
|
break;
|
|
}
|
|
|
|
val = cx22702_readreg(state, 0x03);
|
|
switch ((val & 0x0c) >> 2) {
|
|
case 0:
|
|
p->guard_interval = GUARD_INTERVAL_1_32;
|
|
break;
|
|
case 1:
|
|
p->guard_interval = GUARD_INTERVAL_1_16;
|
|
break;
|
|
case 2:
|
|
p->guard_interval = GUARD_INTERVAL_1_8;
|
|
break;
|
|
case 3:
|
|
p->guard_interval = GUARD_INTERVAL_1_4;
|
|
break;
|
|
}
|
|
switch (val & 0x03) {
|
|
case 0:
|
|
p->transmission_mode = TRANSMISSION_MODE_2K;
|
|
break;
|
|
case 1:
|
|
p->transmission_mode = TRANSMISSION_MODE_8K;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cx22702_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
|
|
{
|
|
struct cx22702_state *state = fe->demodulator_priv;
|
|
u8 val;
|
|
|
|
dprintk("%s(%d)\n", __func__, enable);
|
|
val = cx22702_readreg(state, 0x0D);
|
|
if (enable)
|
|
val &= 0xfe;
|
|
else
|
|
val |= 0x01;
|
|
return cx22702_writereg(state, 0x0D, val);
|
|
}
|
|
|
|
/* Talk to the demod, set the FEC, GUARD, QAM settings etc */
|
|
static int cx22702_set_tps(struct dvb_frontend *fe)
|
|
{
|
|
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
|
|
u8 val;
|
|
struct cx22702_state *state = fe->demodulator_priv;
|
|
|
|
if (fe->ops.tuner_ops.set_params) {
|
|
fe->ops.tuner_ops.set_params(fe);
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0);
|
|
}
|
|
|
|
/* set inversion */
|
|
cx22702_set_inversion(state, p->inversion);
|
|
|
|
/* set bandwidth */
|
|
val = cx22702_readreg(state, 0x0C) & 0xcf;
|
|
switch (p->bandwidth_hz) {
|
|
case 6000000:
|
|
val |= 0x20;
|
|
break;
|
|
case 7000000:
|
|
val |= 0x10;
|
|
break;
|
|
case 8000000:
|
|
break;
|
|
default:
|
|
dprintk("%s: invalid bandwidth\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
cx22702_writereg(state, 0x0C, val);
|
|
|
|
p->code_rate_LP = FEC_AUTO; /* temp hack as manual not working */
|
|
|
|
/* use auto configuration? */
|
|
if ((p->hierarchy == HIERARCHY_AUTO) ||
|
|
(p->modulation == QAM_AUTO) ||
|
|
(p->code_rate_HP == FEC_AUTO) ||
|
|
(p->code_rate_LP == FEC_AUTO) ||
|
|
(p->guard_interval == GUARD_INTERVAL_AUTO) ||
|
|
(p->transmission_mode == TRANSMISSION_MODE_AUTO)) {
|
|
|
|
/* TPS Source - use hardware driven values */
|
|
cx22702_writereg(state, 0x06, 0x10);
|
|
cx22702_writereg(state, 0x07, 0x9);
|
|
cx22702_writereg(state, 0x08, 0xC1);
|
|
cx22702_writereg(state, 0x0B, cx22702_readreg(state, 0x0B)
|
|
& 0xfc);
|
|
cx22702_writereg(state, 0x0C,
|
|
(cx22702_readreg(state, 0x0C) & 0xBF) | 0x40);
|
|
cx22702_writereg(state, 0x00, 0x01); /* Begin acquisition */
|
|
dprintk("%s: Autodetecting\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
/* manually programmed values */
|
|
switch (p->modulation) { /* mask 0x18 */
|
|
case QPSK:
|
|
val = 0x00;
|
|
break;
|
|
case QAM_16:
|
|
val = 0x08;
|
|
break;
|
|
case QAM_64:
|
|
val = 0x10;
|
|
break;
|
|
default:
|
|
dprintk("%s: invalid modulation\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
switch (p->hierarchy) { /* mask 0x07 */
|
|
case HIERARCHY_NONE:
|
|
break;
|
|
case HIERARCHY_1:
|
|
val |= 0x01;
|
|
break;
|
|
case HIERARCHY_2:
|
|
val |= 0x02;
|
|
break;
|
|
case HIERARCHY_4:
|
|
val |= 0x03;
|
|
break;
|
|
default:
|
|
dprintk("%s: invalid hierarchy\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
cx22702_writereg(state, 0x06, val);
|
|
|
|
switch (p->code_rate_HP) { /* mask 0x38 */
|
|
case FEC_NONE:
|
|
case FEC_1_2:
|
|
val = 0x00;
|
|
break;
|
|
case FEC_2_3:
|
|
val = 0x08;
|
|
break;
|
|
case FEC_3_4:
|
|
val = 0x10;
|
|
break;
|
|
case FEC_5_6:
|
|
val = 0x18;
|
|
break;
|
|
case FEC_7_8:
|
|
val = 0x20;
|
|
break;
|
|
default:
|
|
dprintk("%s: invalid code_rate_HP\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
switch (p->code_rate_LP) { /* mask 0x07 */
|
|
case FEC_NONE:
|
|
case FEC_1_2:
|
|
break;
|
|
case FEC_2_3:
|
|
val |= 0x01;
|
|
break;
|
|
case FEC_3_4:
|
|
val |= 0x02;
|
|
break;
|
|
case FEC_5_6:
|
|
val |= 0x03;
|
|
break;
|
|
case FEC_7_8:
|
|
val |= 0x04;
|
|
break;
|
|
default:
|
|
dprintk("%s: invalid code_rate_LP\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
cx22702_writereg(state, 0x07, val);
|
|
|
|
switch (p->guard_interval) { /* mask 0x0c */
|
|
case GUARD_INTERVAL_1_32:
|
|
val = 0x00;
|
|
break;
|
|
case GUARD_INTERVAL_1_16:
|
|
val = 0x04;
|
|
break;
|
|
case GUARD_INTERVAL_1_8:
|
|
val = 0x08;
|
|
break;
|
|
case GUARD_INTERVAL_1_4:
|
|
val = 0x0c;
|
|
break;
|
|
default:
|
|
dprintk("%s: invalid guard_interval\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
switch (p->transmission_mode) { /* mask 0x03 */
|
|
case TRANSMISSION_MODE_2K:
|
|
break;
|
|
case TRANSMISSION_MODE_8K:
|
|
val |= 0x1;
|
|
break;
|
|
default:
|
|
dprintk("%s: invalid transmission_mode\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
cx22702_writereg(state, 0x08, val);
|
|
cx22702_writereg(state, 0x0B,
|
|
(cx22702_readreg(state, 0x0B) & 0xfc) | 0x02);
|
|
cx22702_writereg(state, 0x0C,
|
|
(cx22702_readreg(state, 0x0C) & 0xBF) | 0x40);
|
|
|
|
/* Begin channel acquisition */
|
|
cx22702_writereg(state, 0x00, 0x01);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Reset the demod hardware and reset all of the configuration registers
|
|
to a default state. */
|
|
static int cx22702_init(struct dvb_frontend *fe)
|
|
{
|
|
int i;
|
|
struct cx22702_state *state = fe->demodulator_priv;
|
|
|
|
cx22702_writereg(state, 0x00, 0x02);
|
|
|
|
msleep(10);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(init_tab); i += 2)
|
|
cx22702_writereg(state, init_tab[i], init_tab[i + 1]);
|
|
|
|
cx22702_writereg(state, 0xf8, (state->config->output_mode << 1)
|
|
& 0x02);
|
|
|
|
cx22702_i2c_gate_ctrl(fe, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cx22702_read_status(struct dvb_frontend *fe, enum fe_status *status)
|
|
{
|
|
struct cx22702_state *state = fe->demodulator_priv;
|
|
u8 reg0A;
|
|
u8 reg23;
|
|
|
|
*status = 0;
|
|
|
|
reg0A = cx22702_readreg(state, 0x0A);
|
|
reg23 = cx22702_readreg(state, 0x23);
|
|
|
|
dprintk("%s: status demod=0x%02x agc=0x%02x\n"
|
|
, __func__, reg0A, reg23);
|
|
|
|
if (reg0A & 0x10) {
|
|
*status |= FE_HAS_LOCK;
|
|
*status |= FE_HAS_VITERBI;
|
|
*status |= FE_HAS_SYNC;
|
|
}
|
|
|
|
if (reg0A & 0x20)
|
|
*status |= FE_HAS_CARRIER;
|
|
|
|
if (reg23 < 0xf0)
|
|
*status |= FE_HAS_SIGNAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cx22702_read_ber(struct dvb_frontend *fe, u32 *ber)
|
|
{
|
|
struct cx22702_state *state = fe->demodulator_priv;
|
|
|
|
if (cx22702_readreg(state, 0xE4) & 0x02) {
|
|
/* Realtime statistics */
|
|
*ber = (cx22702_readreg(state, 0xDE) & 0x7F) << 7
|
|
| (cx22702_readreg(state, 0xDF) & 0x7F);
|
|
} else {
|
|
/* Averagtine statistics */
|
|
*ber = (cx22702_readreg(state, 0xDE) & 0x7F) << 7
|
|
| cx22702_readreg(state, 0xDF);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cx22702_read_signal_strength(struct dvb_frontend *fe,
|
|
u16 *signal_strength)
|
|
{
|
|
struct cx22702_state *state = fe->demodulator_priv;
|
|
u8 reg23;
|
|
|
|
/*
|
|
* Experience suggests that the strength signal register works as
|
|
* follows:
|
|
* - In the absence of signal, value is 0xff.
|
|
* - In the presence of a weak signal, bit 7 is set, not sure what
|
|
* the lower 7 bits mean.
|
|
* - In the presence of a strong signal, the register holds a 7-bit
|
|
* value (bit 7 is cleared), with greater values standing for
|
|
* weaker signals.
|
|
*/
|
|
reg23 = cx22702_readreg(state, 0x23);
|
|
if (reg23 & 0x80) {
|
|
*signal_strength = 0;
|
|
} else {
|
|
reg23 = ~reg23 & 0x7f;
|
|
/* Scale to 16 bit */
|
|
*signal_strength = (reg23 << 9) | (reg23 << 2) | (reg23 >> 5);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cx22702_read_snr(struct dvb_frontend *fe, u16 *snr)
|
|
{
|
|
struct cx22702_state *state = fe->demodulator_priv;
|
|
|
|
u16 rs_ber;
|
|
if (cx22702_readreg(state, 0xE4) & 0x02) {
|
|
/* Realtime statistics */
|
|
rs_ber = (cx22702_readreg(state, 0xDE) & 0x7F) << 7
|
|
| (cx22702_readreg(state, 0xDF) & 0x7F);
|
|
} else {
|
|
/* Averagine statistics */
|
|
rs_ber = (cx22702_readreg(state, 0xDE) & 0x7F) << 8
|
|
| cx22702_readreg(state, 0xDF);
|
|
}
|
|
*snr = ~rs_ber;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cx22702_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
|
|
{
|
|
struct cx22702_state *state = fe->demodulator_priv;
|
|
|
|
u8 _ucblocks;
|
|
|
|
/* RS Uncorrectable Packet Count then reset */
|
|
_ucblocks = cx22702_readreg(state, 0xE3);
|
|
if (state->prevUCBlocks < _ucblocks)
|
|
*ucblocks = (_ucblocks - state->prevUCBlocks);
|
|
else
|
|
*ucblocks = state->prevUCBlocks - _ucblocks;
|
|
state->prevUCBlocks = _ucblocks;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cx22702_get_frontend(struct dvb_frontend *fe,
|
|
struct dtv_frontend_properties *c)
|
|
{
|
|
struct cx22702_state *state = fe->demodulator_priv;
|
|
|
|
u8 reg0C = cx22702_readreg(state, 0x0C);
|
|
|
|
c->inversion = reg0C & 0x1 ? INVERSION_ON : INVERSION_OFF;
|
|
return cx22702_get_tps(state, c);
|
|
}
|
|
|
|
static int cx22702_get_tune_settings(struct dvb_frontend *fe,
|
|
struct dvb_frontend_tune_settings *tune)
|
|
{
|
|
tune->min_delay_ms = 1000;
|
|
return 0;
|
|
}
|
|
|
|
static void cx22702_release(struct dvb_frontend *fe)
|
|
{
|
|
struct cx22702_state *state = fe->demodulator_priv;
|
|
kfree(state);
|
|
}
|
|
|
|
static const struct dvb_frontend_ops cx22702_ops;
|
|
|
|
struct dvb_frontend *cx22702_attach(const struct cx22702_config *config,
|
|
struct i2c_adapter *i2c)
|
|
{
|
|
struct cx22702_state *state = NULL;
|
|
|
|
/* allocate memory for the internal state */
|
|
state = kzalloc(sizeof(struct cx22702_state), GFP_KERNEL);
|
|
if (state == NULL)
|
|
goto error;
|
|
|
|
/* setup the state */
|
|
state->config = config;
|
|
state->i2c = i2c;
|
|
|
|
/* check if the demod is there */
|
|
if (cx22702_readreg(state, 0x1f) != 0x3)
|
|
goto error;
|
|
|
|
/* create dvb_frontend */
|
|
memcpy(&state->frontend.ops, &cx22702_ops,
|
|
sizeof(struct dvb_frontend_ops));
|
|
state->frontend.demodulator_priv = state;
|
|
return &state->frontend;
|
|
|
|
error:
|
|
kfree(state);
|
|
return NULL;
|
|
}
|
|
EXPORT_SYMBOL(cx22702_attach);
|
|
|
|
static const struct dvb_frontend_ops cx22702_ops = {
|
|
.delsys = { SYS_DVBT },
|
|
.info = {
|
|
.name = "Conexant CX22702 DVB-T",
|
|
.frequency_min_hz = 177 * MHz,
|
|
.frequency_max_hz = 858 * MHz,
|
|
.frequency_stepsize_hz = 166666,
|
|
.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
|
|
FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
|
|
FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
|
|
FE_CAN_HIERARCHY_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
|
|
FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_RECOVER
|
|
},
|
|
|
|
.release = cx22702_release,
|
|
|
|
.init = cx22702_init,
|
|
.i2c_gate_ctrl = cx22702_i2c_gate_ctrl,
|
|
|
|
.set_frontend = cx22702_set_tps,
|
|
.get_frontend = cx22702_get_frontend,
|
|
.get_tune_settings = cx22702_get_tune_settings,
|
|
|
|
.read_status = cx22702_read_status,
|
|
.read_ber = cx22702_read_ber,
|
|
.read_signal_strength = cx22702_read_signal_strength,
|
|
.read_snr = cx22702_read_snr,
|
|
.read_ucblocks = cx22702_read_ucblocks,
|
|
};
|
|
|
|
MODULE_DESCRIPTION("Conexant CX22702 DVB-T Demodulator driver");
|
|
MODULE_AUTHOR("Steven Toth");
|
|
MODULE_LICENSE("GPL");
|