linux-sg2042/arch/arm/mach-s3c2410/sleep.S

181 lines
4.9 KiB
ArmAsm

/* linux/arch/arm/mach-s3c2410/sleep.S
*
* Copyright (c) 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 Power Manager (Suspend-To-RAM) support
*
* Based on PXA/SA1100 sleep code by:
* Nicolas Pitre, (c) 2002 Monta Vista Software Inc
* Cliff Brake, (c) 2001
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/config.h>
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/hardware.h>
#include <asm/arch/map.h>
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-clock.h>
#include <asm/arch/regs-mem.h>
#include <asm/arch/regs-serial.h>
/* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
* reset the UART configuration, only enable if you really need this!
*/
//#define CONFIG_DEBUG_RESUME
.text
/* s3c2410_cpu_suspend
*
* put the cpu into sleep mode
*
* entry:
* r0 = sleep save block
*/
ENTRY(s3c2410_cpu_suspend)
stmfd sp!, { r4 - r12, lr }
@@ store co-processor registers
mrc p15, 0, r4, c15, c1, 0 @ CP access register
mrc p15, 0, r5, c13, c0, 0 @ PID
mrc p15, 0, r6, c3, c0, 0 @ Domain ID
mrc p15, 0, r7, c2, c0, 0 @ translation table base address
mrc p15, 0, r8, c2, c0, 0 @ auxiliary control register
mrc p15, 0, r9, c1, c0, 0 @ control register
stmia r0, { r4 - r13 }
@@ flush the caches to ensure everything is back out to
@@ SDRAM before the core powers down
bl arm920_flush_kern_cache_all
@@ prepare cpu to sleep
ldr r4, =S3C2410_REFRESH
ldr r5, =S3C24XX_MISCCR
ldr r6, =S3C2410_CLKCON
ldr r7, [ r4 ] @ get REFRESH (and ensure in TLB)
ldr r8, [ r5 ] @ get MISCCR (and ensure in TLB)
ldr r9, [ r6 ] @ get CLKCON (and ensure in TLB)
orr r7, r7, #S3C2410_REFRESH_SELF @ SDRAM sleep command
orr r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals
orr r9, r9, #S3C2410_CLKCON_POWER @ power down command
teq pc, #0 @ first as a trial-run to load cache
bl s3c2410_do_sleep
teq r0, r0 @ now do it for real
b s3c2410_do_sleep @
@@ align next bit of code to cache line
.align 8
s3c2410_do_sleep:
streq r7, [ r4 ] @ SDRAM sleep command
streq r8, [ r5 ] @ SDRAM power-down config
streq r9, [ r6 ] @ CPU sleep
1: beq 1b
mov pc, r14
@@ return to the caller, after having the MMU
@@ turned on, this restores the last bits from the
@@ stack
resume_with_mmu:
ldmfd sp!, { r4 - r12, pc }
.ltorg
@@ the next bits sit in the .data segment, even though they
@@ happen to be code... the s3c2410_sleep_save_phys needs to be
@@ accessed by the resume code before it can restore the MMU.
@@ This means that the variable has to be close enough for the
@@ code to read it... since the .text segment needs to be RO,
@@ the data segment can be the only place to put this code.
.data
.global s3c2410_sleep_save_phys
s3c2410_sleep_save_phys:
.word 0
/* s3c2410_cpu_resume
*
* resume code entry for bootloader to call
*
* we must put this code here in the data segment as we have no
* other way of restoring the stack pointer after sleep, and we
* must not write to the code segment (code is read-only)
*/
ENTRY(s3c2410_cpu_resume)
mov r0, #PSR_I_BIT | PSR_F_BIT | MODE_SVC
msr cpsr_c, r0
@@ load UART to allow us to print the two characters for
@@ resume debug
mov r2, #S3C24XX_PA_UART & 0xff000000
orr r2, r2, #S3C24XX_PA_UART & 0xff000
#if 0
/* SMDK2440 LED set */
mov r14, #S3C24XX_PA_GPIO
ldr r12, [ r14, #0x54 ]
bic r12, r12, #3<<4
orr r12, r12, #1<<7
str r12, [ r14, #0x54 ]
#endif
#ifdef CONFIG_DEBUG_RESUME
mov r3, #'L'
strb r3, [ r2, #S3C2410_UTXH ]
1001:
ldrb r14, [ r3, #S3C2410_UTRSTAT ]
tst r14, #S3C2410_UTRSTAT_TXE
beq 1001b
#endif /* CONFIG_DEBUG_RESUME */
mov r1, #0
mcr p15, 0, r1, c8, c7, 0 @@ invalidate I & D TLBs
mcr p15, 0, r1, c7, c7, 0 @@ invalidate I & D caches
ldr r0, s3c2410_sleep_save_phys @ address of restore block
ldmia r0, { r4 - r13 }
mcr p15, 0, r4, c15, c1, 0 @ CP access register
mcr p15, 0, r5, c13, c0, 0 @ PID
mcr p15, 0, r6, c3, c0, 0 @ Domain ID
mcr p15, 0, r7, c2, c0, 0 @ translation table base
mcr p15, 0, r8, c1, c1, 0 @ auxilliary control
#ifdef CONFIG_DEBUG_RESUME
mov r3, #'R'
strb r3, [ r2, #S3C2410_UTXH ]
#endif
ldr r2, =resume_with_mmu
mcr p15, 0, r9, c1, c0, 0 @ turn on MMU, etc
nop @ second-to-last before mmu
mov pc, r2 @ go back to virtual address
.ltorg