linux-sg2042/include/asm-sh/bigsur/bigsur.h

81 lines
2.4 KiB
C

/*
*
* Hitachi Big Sur Eval Board support
*
* Dustin McIntire (dustin@sensoria.com)
*
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*
* Derived from Hitachi SH7751 reference manual
*
*/
#ifndef _ASM_BIGSUR_H_
#define _ASM_BIGSUR_H_
#include <asm/irq.h>
#include <asm/hd64465/hd64465.h>
/* 7751 Internal IRQ's used by external CPLD controller */
#define BIGSUR_IRQ_LOW 0
#define BIGSUR_IRQ_NUM 14 /* External CPLD level 1 IRQs */
#define BIGSUR_IRQ_HIGH (BIGSUR_IRQ_LOW + BIGSUR_IRQ_NUM)
#define BIGSUR_2NDLVL_IRQ_LOW (HD64465_IRQ_BASE+HD64465_IRQ_NUM)
#define BIGSUR_2NDLVL_IRQ_NUM 32 /* Level 2 IRQs = 4 regs * 8 bits */
#define BIGSUR_2NDLVL_IRQ_HIGH (BIGSUR_2NDLVL_IRQ_LOW + \
BIGSUR_2NDLVL_IRQ_NUM)
/* PCI interrupt base number (A_INTA-A_INTD) */
#define BIGSUR_SH7751_PCI_IRQ_BASE (BIGSUR_2NDLVL_IRQ_LOW+10)
/* CPLD registers and external chip addresses */
#define BIGSUR_HD64464_ADDR 0xB2000000
#define BIGSUR_DGDR 0xB1FFFE00
#define BIGSUR_BIDR 0xB1FFFD00
#define BIGSUR_CSLR 0xB1FFFC00
#define BIGSUR_SW1R 0xB1FFFB00
#define BIGSUR_DBGR 0xB1FFFA00
#define BIGSUR_BDTR 0xB1FFF900
#define BIGSUR_BDRR 0xB1FFF800
#define BIGSUR_PPR1 0xB1FFF700
#define BIGSUR_PPR2 0xB1FFF600
#define BIGSUR_IDE2 0xB1FFF500
#define BIGSUR_IDE3 0xB1FFF400
#define BIGSUR_SPCR 0xB1FFF300
#define BIGSUR_ETHR 0xB1FE0000
#define BIGSUR_PPDR 0xB1FDFF00
#define BIGSUR_ICTL 0xB1FDFE00
#define BIGSUR_ICMD 0xB1FDFD00
#define BIGSUR_DMA0 0xB1FDFC00
#define BIGSUR_DMA1 0xB1FDFB00
#define BIGSUR_IRQ0 0xB1FDFA00
#define BIGSUR_IRQ1 0xB1FDF900
#define BIGSUR_IRQ2 0xB1FDF800
#define BIGSUR_IRQ3 0xB1FDF700
#define BIGSUR_IMR0 0xB1FDF600
#define BIGSUR_IMR1 0xB1FDF500
#define BIGSUR_IMR2 0xB1FDF400
#define BIGSUR_IMR3 0xB1FDF300
#define BIGSUR_IRLMR0 0xB1FDF200
#define BIGSUR_IRLMR1 0xB1FDF100
#define BIGSUR_V320USC_ADDR 0xB1000000
#define BIGSUR_HD64465_ADDR 0xB0000000
#define BIGSUR_INTERNAL_BASE 0xB0000000
/* SMC ethernet card parameters */
#define BIGSUR_ETHER_IOPORT 0x220
/* IDE register paramters */
#define BIGSUR_IDECMD_IOPORT 0x1f0
#define BIGSUR_IDECTL_IOPORT 0x1f8
/* LED bit position in BIGSUR_CSLR */
#define BIGSUR_LED (1<<4)
/* PCI: default LOCAL memory window sizes (seen from PCI bus) */
#define BIGSUR_LSR0_SIZE (64*(1<<20)) //64MB
#define BIGSUR_LSR1_SIZE (64*(1<<20)) //64MB
#endif /* _ASM_BIGSUR_H_ */