253 lines
6.6 KiB
C
253 lines
6.6 KiB
C
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
|
#ifndef __HWMON_NCT6775_H__
|
|
#define __HWMON_NCT6775_H__
|
|
|
|
#include <linux/types.h>
|
|
|
|
enum kinds { nct6106, nct6116, nct6775, nct6776, nct6779, nct6791, nct6792,
|
|
nct6793, nct6795, nct6796, nct6797, nct6798 };
|
|
enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 };
|
|
|
|
#define NUM_TEMP 10 /* Max number of temp attribute sets w/ limits*/
|
|
#define NUM_TEMP_FIXED 6 /* Max number of fixed temp attribute sets */
|
|
#define NUM_TSI_TEMP 8 /* Max number of TSI temp register pairs */
|
|
|
|
#define NUM_REG_ALARM 7 /* Max number of alarm registers */
|
|
#define NUM_REG_BEEP 5 /* Max number of beep registers */
|
|
|
|
#define NUM_FAN 7
|
|
|
|
struct nct6775_data {
|
|
int addr; /* IO base of hw monitor block */
|
|
int sioreg; /* SIO register address */
|
|
enum kinds kind;
|
|
const char *name;
|
|
|
|
const struct attribute_group *groups[7];
|
|
u8 num_groups;
|
|
|
|
u16 reg_temp[5][NUM_TEMP]; /* 0=temp, 1=temp_over, 2=temp_hyst,
|
|
* 3=temp_crit, 4=temp_lcrit
|
|
*/
|
|
u8 temp_src[NUM_TEMP];
|
|
u16 reg_temp_config[NUM_TEMP];
|
|
const char * const *temp_label;
|
|
u32 temp_mask;
|
|
u32 virt_temp_mask;
|
|
|
|
u16 REG_CONFIG;
|
|
u16 REG_VBAT;
|
|
u16 REG_DIODE;
|
|
u8 DIODE_MASK;
|
|
|
|
const s8 *ALARM_BITS;
|
|
const s8 *BEEP_BITS;
|
|
|
|
const u16 *REG_VIN;
|
|
const u16 *REG_IN_MINMAX[2];
|
|
|
|
const u16 *REG_TARGET;
|
|
const u16 *REG_FAN;
|
|
const u16 *REG_FAN_MODE;
|
|
const u16 *REG_FAN_MIN;
|
|
const u16 *REG_FAN_PULSES;
|
|
const u16 *FAN_PULSE_SHIFT;
|
|
const u16 *REG_FAN_TIME[3];
|
|
|
|
const u16 *REG_TOLERANCE_H;
|
|
|
|
const u8 *REG_PWM_MODE;
|
|
const u8 *PWM_MODE_MASK;
|
|
|
|
const u16 *REG_PWM[7]; /* [0]=pwm, [1]=pwm_start, [2]=pwm_floor,
|
|
* [3]=pwm_max, [4]=pwm_step,
|
|
* [5]=weight_duty_step, [6]=weight_duty_base
|
|
*/
|
|
const u16 *REG_PWM_READ;
|
|
|
|
const u16 *REG_CRITICAL_PWM_ENABLE;
|
|
u8 CRITICAL_PWM_ENABLE_MASK;
|
|
const u16 *REG_CRITICAL_PWM;
|
|
|
|
const u16 *REG_AUTO_TEMP;
|
|
const u16 *REG_AUTO_PWM;
|
|
|
|
const u16 *REG_CRITICAL_TEMP;
|
|
const u16 *REG_CRITICAL_TEMP_TOLERANCE;
|
|
|
|
const u16 *REG_TEMP_SOURCE; /* temp register sources */
|
|
const u16 *REG_TEMP_SEL;
|
|
const u16 *REG_WEIGHT_TEMP_SEL;
|
|
const u16 *REG_WEIGHT_TEMP[3]; /* 0=base, 1=tolerance, 2=step */
|
|
|
|
const u16 *REG_TEMP_OFFSET;
|
|
|
|
const u16 *REG_ALARM;
|
|
const u16 *REG_BEEP;
|
|
|
|
const u16 *REG_TSI_TEMP;
|
|
|
|
unsigned int (*fan_from_reg)(u16 reg, unsigned int divreg);
|
|
unsigned int (*fan_from_reg_min)(u16 reg, unsigned int divreg);
|
|
|
|
struct mutex update_lock;
|
|
bool valid; /* true if following fields are valid */
|
|
unsigned long last_updated; /* In jiffies */
|
|
|
|
/* Register values */
|
|
u8 bank; /* current register bank */
|
|
u8 in_num; /* number of in inputs we have */
|
|
u8 in[15][3]; /* [0]=in, [1]=in_max, [2]=in_min */
|
|
unsigned int rpm[NUM_FAN];
|
|
u16 fan_min[NUM_FAN];
|
|
u8 fan_pulses[NUM_FAN];
|
|
u8 fan_div[NUM_FAN];
|
|
u8 has_pwm;
|
|
u8 has_fan; /* some fan inputs can be disabled */
|
|
u8 has_fan_min; /* some fans don't have min register */
|
|
bool has_fan_div;
|
|
|
|
u8 num_temp_alarms; /* 2, 3, or 6 */
|
|
u8 num_temp_beeps; /* 2, 3, or 6 */
|
|
u8 temp_fixed_num; /* 3 or 6 */
|
|
u8 temp_type[NUM_TEMP_FIXED];
|
|
s8 temp_offset[NUM_TEMP_FIXED];
|
|
s16 temp[5][NUM_TEMP]; /* 0=temp, 1=temp_over, 2=temp_hyst,
|
|
* 3=temp_crit, 4=temp_lcrit
|
|
*/
|
|
s16 tsi_temp[NUM_TSI_TEMP];
|
|
u64 alarms;
|
|
u64 beeps;
|
|
|
|
u8 pwm_num; /* number of pwm */
|
|
u8 pwm_mode[NUM_FAN]; /* 0->DC variable voltage,
|
|
* 1->PWM variable duty cycle
|
|
*/
|
|
enum pwm_enable pwm_enable[NUM_FAN];
|
|
/* 0->off
|
|
* 1->manual
|
|
* 2->thermal cruise mode (also called SmartFan I)
|
|
* 3->fan speed cruise mode
|
|
* 4->SmartFan III
|
|
* 5->enhanced variable thermal cruise (SmartFan IV)
|
|
*/
|
|
u8 pwm[7][NUM_FAN]; /* [0]=pwm, [1]=pwm_start, [2]=pwm_floor,
|
|
* [3]=pwm_max, [4]=pwm_step,
|
|
* [5]=weight_duty_step, [6]=weight_duty_base
|
|
*/
|
|
|
|
u8 target_temp[NUM_FAN];
|
|
u8 target_temp_mask;
|
|
u32 target_speed[NUM_FAN];
|
|
u32 target_speed_tolerance[NUM_FAN];
|
|
u8 speed_tolerance_limit;
|
|
|
|
u8 temp_tolerance[2][NUM_FAN];
|
|
u8 tolerance_mask;
|
|
|
|
u8 fan_time[3][NUM_FAN]; /* 0 = stop_time, 1 = step_up, 2 = step_down */
|
|
|
|
/* Automatic fan speed control registers */
|
|
int auto_pwm_num;
|
|
u8 auto_pwm[NUM_FAN][7];
|
|
u8 auto_temp[NUM_FAN][7];
|
|
u8 pwm_temp_sel[NUM_FAN];
|
|
u8 pwm_weight_temp_sel[NUM_FAN];
|
|
u8 weight_temp[3][NUM_FAN]; /* 0->temp_step, 1->temp_step_tol,
|
|
* 2->temp_base
|
|
*/
|
|
|
|
u8 vid;
|
|
u8 vrm;
|
|
|
|
bool have_vid;
|
|
|
|
u16 have_temp;
|
|
u16 have_temp_fixed;
|
|
u16 have_tsi_temp;
|
|
u16 have_in;
|
|
|
|
/* Remember extra register values over suspend/resume */
|
|
u8 vbat;
|
|
u8 fandiv1;
|
|
u8 fandiv2;
|
|
u8 sio_reg_enable;
|
|
|
|
struct regmap *regmap;
|
|
bool read_only;
|
|
|
|
/* driver-specific (platform, i2c) initialization hook and data */
|
|
int (*driver_init)(struct nct6775_data *data);
|
|
void *driver_data;
|
|
};
|
|
|
|
static inline int nct6775_read_value(struct nct6775_data *data, u16 reg, u16 *value)
|
|
{
|
|
unsigned int tmp;
|
|
int ret = regmap_read(data->regmap, reg, &tmp);
|
|
|
|
if (!ret)
|
|
*value = tmp;
|
|
return ret;
|
|
}
|
|
|
|
static inline int nct6775_write_value(struct nct6775_data *data, u16 reg, u16 value)
|
|
{
|
|
return regmap_write(data->regmap, reg, value);
|
|
}
|
|
|
|
bool nct6775_reg_is_word_sized(struct nct6775_data *data, u16 reg);
|
|
int nct6775_probe(struct device *dev, struct nct6775_data *data,
|
|
const struct regmap_config *regmapcfg);
|
|
|
|
ssize_t nct6775_show_alarm(struct device *dev, struct device_attribute *attr, char *buf);
|
|
ssize_t nct6775_show_beep(struct device *dev, struct device_attribute *attr, char *buf);
|
|
ssize_t nct6775_store_beep(struct device *dev, struct device_attribute *attr, const char *buf,
|
|
size_t count);
|
|
|
|
static inline int nct6775_write_temp(struct nct6775_data *data, u16 reg, u16 value)
|
|
{
|
|
if (!nct6775_reg_is_word_sized(data, reg))
|
|
value >>= 8;
|
|
return nct6775_write_value(data, reg, value);
|
|
}
|
|
|
|
static inline umode_t nct6775_attr_mode(struct nct6775_data *data, struct attribute *attr)
|
|
{
|
|
return data->read_only ? (attr->mode & ~0222) : attr->mode;
|
|
}
|
|
|
|
static inline int
|
|
nct6775_add_attr_group(struct nct6775_data *data, const struct attribute_group *group)
|
|
{
|
|
/* Need to leave a NULL terminator at the end of data->groups */
|
|
if (data->num_groups == ARRAY_SIZE(data->groups) - 1)
|
|
return -ENOBUFS;
|
|
|
|
data->groups[data->num_groups++] = group;
|
|
return 0;
|
|
}
|
|
|
|
#define NCT6775_REG_BANK 0x4E
|
|
#define NCT6775_REG_CONFIG 0x40
|
|
|
|
#define NCT6775_REG_FANDIV1 0x506
|
|
#define NCT6775_REG_FANDIV2 0x507
|
|
|
|
#define NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE 0x28
|
|
|
|
#define FAN_ALARM_BASE 16
|
|
#define TEMP_ALARM_BASE 24
|
|
#define INTRUSION_ALARM_BASE 30
|
|
#define BEEP_ENABLE_BASE 15
|
|
|
|
/*
|
|
* Not currently used:
|
|
* REG_MAN_ID has the value 0x5ca3 for all supported chips.
|
|
* REG_CHIP_ID == 0x88/0xa1/0xc1 depending on chip model.
|
|
* REG_MAN_ID is at port 0x4f
|
|
* REG_CHIP_ID is at port 0x58
|
|
*/
|
|
|
|
#endif /* __HWMON_NCT6775_H__ */
|